COMPUTIME RS Receiver User Manual

Computime Limited Receiver

a href="https://usermanual.wiki/COMPUTIME" itemprop="url"> COMPUTIME >

User manual

  50D0111 RCSITEA Installation & Operating Manual         Rel 1.0  April 2009     Page 1 of 10                                       Ambient TechnologiesA Division Of  Monessen Hearth Systems  RCSITEA Thermostatic On/Off, Flame Height Adjustment and Blower Remote Control– 120VAC  INSTALLATION AND OPERATING INSTRUCTIONS  CAUTION: The RCSITEA is only certified to be used on vented heater rated equipment.  This remote control system provides a safe, reliable and user-friendly remote control for millivolt valve gas appliances, blower speed and flame height adjustment.  The system can be manually or thermostatically turned on and off with the transmitter.  Always check the appliance home owner’s manual for additional information, or warnings regarding accessory installation before connecting this remote control system.  Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately contact the dealer from whom you purchased the kit or Ambient Technologies Technical Support  at 1 800 398 6195.  Do not attempt to install any part of the kit unless all parts are in good condition.  Please keep this booklet for future reference.  Please check the gas type of the unit to match the current   CONTENTS OF KIT   Description Qty Transmitter 1 Battery Alkaline AAA (for Transmitter)  3 Receiver (Assembly)  consists of :  1 Receiver Box   AC Adaptor for Receiver   SIT Stepper Motor  1 Slide Button-Black (On/RS/Off)  1 Wall Cover Plate-Black  1 Wire Nuts  2 Plug-In Wiring Assembly for SIT mV Valve– 22” Inches  1 Plug-In Wiring Assembly for SIT Hi/Lo Regulator – 10” Inches  1 Velcro (Loop and Hook)  1 Installation Instructions  1 #8 Screw for sheet metal, Black   2   FEATURES/SPECIFICATIONS  • Easy Access Thermostatic Control • Battery Powered Transmitter  • Low battery Indication for Transmitter  • Compact 120 VAC Adapter with 30” Wire • Three Speed Control for Blower with Blower Type Selection • Three Flame Height Settings • Programmable Timer to Turn Blower on and Off • Child Proof Lock-out • 16 Security Codes • 6 hour Shut Down (Optional) on Receiver
  50D0111 RCSITEA Installation & Operating Manual         Rel 1.0  April 2009     Page 2 of 10                                       Ambient TechnologiesA Division Of  Monessen Hearth Systems • Quick Disconnect Wiring Assembly • Reset Button for transmitter    WARNING Important Safety Information   • Read this manual thoroughly prior to installing, programming or operating any remote control. • This remote control system is designed for use with a millivolt gas valve system with blower.  Do not use this remote control system on applications with voltages above 24 Volts AC/DC and 1 amp current. • This remote control system requires three (3) “AAA” alkaline batteries to power the transmitter. The receiver is powered by external AC Adapter.   • Wiring must conform to appliance requirement and building codes/ordinances as required by local and national code authorities having jurisdiction. • Do not short (or jumper) across the gas valve terminals to test the remote control installation. This could damage the unit and void the warranty. • This remote control system should only be used as described in this manual.  Any other use is not recommended and will void the warranty.   NOTE Due to the sensitive temperature monitoring components in the transmitter,  it is  necessary to allow the transmitter to stabilize to room temperature before accurate room temperatures are displayed.  If the transmitter is activated from a severe cold condition, allow 15 minutes for accurate temperature readings to appear on the LCD display.   WARNING Turn appliance OFF and allow to cool before installing or servicing.  DO NOT connect 110-120 VAC wiring to the milli-volt gas control valve.  The remote operator must be installed exactly as outlined in these instructions.  Read all instructions completely before attempting installation.  Follow instructions carefully during installation.  Any modification of components will void the warranty and may cause a fire hazard.  WARNING Turn appliance OFF (at the appliance or remote receiver) if you are away from your house for an extended period of time.  Never leave anything on top of the surface of the transmitter.     INSTALLATIONS  Remote Receiver:  The remote receiver may be installed in the appliance per the appliance homeowner’s manual. Refer to the Homeowner’s Manual for special installation instructions.   Failure to follow the installation instructions found in the appropriate Homeowner’s Manual will void the warranty and may cause a fire hazard.
Download:
Mirror Download [FCC.gov]
Document ID1801859
Application IDy6PFLeMoOuD4LEE0jHsLww==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize18.72kB (234061 bits)
Date Submitted2012-09-26 00:00:00
Date Available2012-09-26 00:00:00
Creation Date2012-09-21 11:08:27
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2012-09-21 11:08:27
Document TitleMicrosoft Word - user manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: zmp
FCC ID Filing: DI2RS

Navigation menu