CalAmp Wireless Networks 520006 Wireless Cable Modem Transceivers, 520006-1 & 5200 User Manual

CalAmp Corp. Wireless Cable Modem Transceivers, 520006-1 & 5200

a href="https://usermanual.wiki/CalAmp-Wireless-Networks" itemprop="url"> CalAmp Wireless Networks >

User manual

131908/2 C+A1C+A TRANSCEIVER INSTALLATION GUIDE____________________________________________________The installation of California Amplifier transceiver products should only be doneby qualified personnel, and should be under the direct guidelines of the systemoperator. These installation instructions apply to California Amplifier productsonly. Use of these instructions to install other manufacturer’s products mayresult in unknown hazards, damage and/or unacceptable performance.The information contained in this applications note is intended to assist theoperator in developing a set of installation guidelines and operating practices forthe field personnel skilled in installing roof top subscriber equipment.California Amplifier accepts no responsibility for claims of injury, death,destruction of property or loss of television service related to improperinstallation, or installation of equipment by staff not skilled in installing roof topcable television equipment.460 Calle San Pablo, Camarillo, California 93012 USA PH: (805) 987-9000 Fax (805) 987-8359
131908/2 C+A2GENERAL INSTALLATIONINSTRUCTIONS FOR TRANSCEIVERNOTE to System Operator:California Amplifier family of Transceiver products has been designed forinstallation by a licensed or qualified installer with experience in installingwireless antennas.NOTE to INSTALLER:1. Installation and operation of this family of Transceiver products require fullcompliance with FCC-adopted radio frequency exposure limits. It is in theresponsibility of the installer to install these devices and their associatedantennas so that RF exposure does not exceed 1.0mW/cm2. The followingtable summarizes the minimum distance required to satisfy theserequirements.Limits, MinimumP/N Integrated Planar (17 dBi) Standalone (when used with 24 dBi)520005-1 N/A 26 in. (66 cm)520004-1 N/A 48 in. (122 cm)520006-1 N/A 26 in. (66 cm)520007-2 12 in. (30 cm) N/A520024-2 12 in. (30 cm) N/A520004-2 22 in. (55 cm) N/A520006-2 12 in. (30 cm) N/A2. When installing a standalone Transceiver, orient the FCC RF exposure labelso that it is facing the front of the Antenna This is a mandatory requirementby the FCC to comply with RF exposure compliance requirements. Thelabel should not be obstructed when installation is complete. This willallow the warning label to be visible and readable. This is a mandatoryrequirement by the FCC to comply with RF exposure compliancerequirements
Download:
Mirror Download [FCC.gov]
Document ID99425
Application IDlaV9wX5JUHIDnxRKu6ArZA==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize50.3kB (628737 bits)
Date Submitted2000-05-10 00:00:00
Date Available2000-09-19 00:00:00
Creation Date2000-05-10 13:22:53
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2000-05-10 13:22:55
Document TitleUser manual
FCC ID Filing: J26520006

Navigation menu