Checkpoint Systems PV20008-2 PV2000 Portable Verifier User Manual

Checkpoint Systems Inc PV2000 Portable Verifier Users Guide

a href="https://usermanual.wiki/Checkpoint-Systems" itemprop="url"> Checkpoint Systems >

Users Guide

PV2000 USER’S GUIDEHow to use the PV2000 Portable Verifier:• Push and hold the button in. The PV2000 should make three quick beeps to let you know it isworking. If the button is released, the PV2000 will turn off.• If it does not beep when turned on the battery may need to be replaced. (See How to replace batteriessection)• While maintaining the button depression, slowly sweep the unit four to six inches from the possiblelocation of the tag. An audible tone confirms the presence of the tag. A red light will also flash on theunit.How to replace the batteries:• Remove the single screw on the bottom of the unit, and slide off the plastic shell.• Pull battery from battery compartment and place new one in.• The PV2000 uses a standard 9Volt battery.Description and function of lights during unit activation:• The red light flashes when there is a Checkpoint tag present.• The green light indicates power to the unit when button is pushed in.• The amber light indicates low battery and the battery should be changed at this time. (See How toreplace batteries section)
Download: Checkpoint Systems PV20008-2 PV2000 Portable Verifier User Manual
Mirror Download [FCC.gov]Checkpoint Systems PV20008-2 PV2000 Portable Verifier User Manual
Document ID165028
Application IDmDA7baxij7I3OW/b/k93dQ==
Document DescriptionUsers Guide
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize0.68kB (8448 bits)
Date Submitted2001-08-17 00:00:00
Date Available2001-10-29 00:00:00
Creation Date2001-08-15 11:54:16
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2001-08-15 11:54:23
Document TitleUsers Guide
Document CreatorMicrosoft Word 8.0
Document Author: Kelly Gedling
FCC ID Filing: DO4PV20008-2

Navigation menu