Cisco Linksys WPC54G Wireless 802.11g Notebook Adapter User Manual

Cisco-Linksys, LLC Wireless 802.11g Notebook Adapter Manual Part 1

a href="https://usermanual.wiki/Cisco-Linksys" itemprop="url"> Cisco Linksys >

Contents

Manual Part 2

Wireless-G Notebook Adapter17Instant Wireless®SeriesThe Link Information screen displays signal strength and link quality informa-tion about the current connection and provides a button to click for additionalstatus information. Ad-Hoc Mode or Infrastructure Mode - The screen indicates whether theAdapter is currently working in ad-hoc or infrastructure mode. Signal Strength - The Signal Strength bar indicates signal strength, from 0 to100%. Link Quality - The Link Quality bar indicates the quality of the wireless net-work connection, from 0 to 100%.Click the More Information button to view more information about the wire-less network connection.Click the X (Close) button in the upper right corner to exit the WLAN Monitor.16TCP/IP SettingIP Address - The IP Address of the Adapter.Subnet Mask - The Subnet Mask of the Adapter.Default Gateway - The Default Gateway address of the Adapter.DHCP - The status of the DHCP client.DNS - The DNS address of the Adapter.Wireless Network StatusState - The status of the wireless network connection.SSID - The unique name of the wireless network. Wireless Mode - The mode of the wireless network currently in use.Transfer Rate - The data transfer rate of the current connection.Channel - The channel to which the wireless network devices are set. WEP - The status of the WEP encryption security feature.MAC - The MAC address of the wireless network’s access point.Signal Strength - The Signal Strength bar indicates signal strength, from 0 to100%. Link Quality - The Link Quality bar indicates the quality of the wireless net-work connection, from 0 to 100%.Click the Back button to return to the initial Link Information screen. Click theX (Close) button in the upper right corner to exit the WLAN Monitor.Figure 7-4Link InformationFigure 7-3
Wireless-G Notebook AdapterIn the WEP drop-down box, select the type of WEP encryption used by thewireless network: 64-bit, or 128-bit WEP.If the wireless network uses a passphrase, enter the passphrase in thePassphrase field. If the wireless network uses a WEP key, enter the WEP keyin the Key 1 field. Click the OK button to complete the network connection and return to the SiteSurvey screen, or click the Cancel button to cancel the network connection andreturn to the Site Survey screen.On the Site Survey screen, click the X (Close) button in the upper right cornerto exit the WLAN Monitor.19Instant Wireless®Series18Figure 7-6The Site Survey screen displays a list of infrastructure and ad-hoc networksavailable for connection. SSID - The SSID or unique name of the wireless network. Signal - The percentage of signal strength, from 0 to 100%.Site InformationWireless Mode - The mode of the wireless network currently in use.Channel - The channel to which the wireless network devices are set. WEP - The status of the WEP encryption security feature.MAC - The MAC address of the wireless network’s access point.Surveyed at - The time at which the wireless network was scanned. Refresh - Click the Refresh button to perform a new search for wirelessdevices. Connect - To connect to one of the networks on the list, select the wireless net-work,and click the Connect button. If the wireless network has WEP encryp-tion enabled, you will see the screen shown in Figure 7-6.Figure 7-5Site Survey
Download:
Mirror Download [FCC.gov]
Document ID289888
Application IDbXrTeJfAMVCDeg7HNZlLWw==
Document DescriptionManual Part 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize173.57kB (2169602 bits)
Date Submitted2002-12-13 00:00:00
Date Available2002-12-13 00:00:00
Creation Date2002-12-11 14:40:00
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2002-12-11 14:40:25
Document TitleManual Part 2
FCC ID Filing: PKW-WPC54G

Navigation menu