Cisco Systems 102049 802.11 b/g Mini-PCI Radio Module User Manual

Cisco Systems Inc 802.11 b/g Mini-PCI Radio Module ap1200 4b

a href="https://usermanual.wiki/Cisco-Systems" itemprop="url"> Cisco Systems >

Contents

OEM Installation instruction

CHAPTERFirst Draft - CISCO CONFIDENTIAL7-1Cisco Aironet 1200 Series Access Point Hardware Installation GuideOL-4310-0272.4-GHz Radio UpgradeThis chapter provides upgrade instructions for the 2.4-GHz (IEEE 802.11b-compliant or IEEE 802.11g-compliant) radio card and includes the following sections:•Upgrade Overview, page 7-2•Opening the Access Cover, page 7-3•Removing a Blank Spacer Card, page 7-4•Removing a 2.4-GHz Radio, page 7-5•Installing a 2.4-GHz Radio, page 7-7
First Draft - CISCO CONFIDENTIAL7-2Cisco Aironet 1200 Series Access Point Hardware Installation Guide OL-4310-02Chapter 7 2.4-GHz Radio UpgradeUpgrade OverviewUpgrade OverviewThis section provides instructions for upgrading the access point 2.4-GHz radio. The following operations summarize the upgrade procedure: 1. Remove all cables and power connections from the access point.2. Follow standard electrostatic discharge (ESD) procedures.3. Place the access point on an ESD-protected work surface.4. Open the access point’s 2.4-GHz radio access cover.5. For an access point without a 2.4-GHz radio feature, remove the blank spacer card.6. For an access point with a 2.4-GHz radio feature, remove the existing 2.4-GHz radio card.7. Install the new 2.4-GHz radio card.8. Close the access point 2.4-GHz radio access cover.Caution ESD can damage the Cisco Aironet radio and the internal components of the access point. It is recommended that the 2.4-GHz radio upgrade procedures be performed by an ESD-trained service technician at an ESD-protected workstation.Note After you install the new radio, all configurable radio settings will be at default values. Refer to the Cisco IOS Software Configuration Guide for Cisco Aironet Access Points for complete instructions on configuring the new radio.Unpacking the RadioEach 2.4-GHz radio is shipped with the following items:•Quick start guide•A product registration card•A T-10 tamper-resistant Torx L-wrench•A 2.4-GHz radio compliance labelIf anything is missing or damaged, contact your Cisco representative for support.
Download:
Mirror Download [FCC.gov]
Document ID359631
Application IDu2xBLBGM/yKGiDM/EyY+/Q==
Document DescriptionOEM Installation instruction
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.93kB (211664 bits)
Date Submitted2003-09-24 00:00:00
Date Available2003-09-24 00:00:00
Creation Date2003-09-02 14:11:15
Producing SoftwareAcrobat Distiller 4.05 for Windows
Document Lastmod2003-09-02 14:16:03
Document Titleap1200_4.fmb
Document CreatorFrameMaker 5.5.6p145
FCC ID Filing: LDK102049

Navigation menu