Cisco Systems 102079P Cisco Aironet 802.11n Dual Band Access Points User Manual

Cisco Systems Inc Cisco Aironet 802.11n Dual Band Access Points

a href="https://usermanual.wiki/Cisco-Systems" itemprop="url"> Cisco Systems >

Contents

Manaul

GETTING STARTED GUIDE Cisco Aironet 3502P Lightweight Access Point1About this Guide2Safety Instructions3Unpacking4Overview5Configuring the Access Point6Mounting the Access Point7Deploying the Access Point on the Wireless Network8Troubleshooting9Declarations of Conformity and Regulatory Information10 Configuring DHCP Option 43 and DHCP Option 6011 Access Point Specificationsap3502getstartForJMR3.fm Page 1 Thursday, October 27, 2011 11:28 AM
2 1 About this GuideThis Guide provides instructions on how to install and configure your Cisco Aironet 3502P Access Point. This guide also provides mounting instructions and limited troubleshooting procedures.2 Safety InstructionsTranslated versions of the following safety warnings are provided in the translated safety warnings document that is shipped with your access point. The translated warnings are also in the Translated Safety Warnings for Cisco Aironet Access Points, which is available on Cisco.com.WarningIMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONSWarningOnly trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030WarningIn order to comply with radio frequency (RF) exposure limits, the antennas for this product should be positioned no less than 6.56 ft (2 m) from your body or nearby persons. Statement 339WarningRead the installation instructions before you connect the system to its power source. Statement 1004WarningThis product must be connected to a Power-over-Ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Statement 353ap3502getstartForJMR3.fm Page 2 Thursday, October 27, 2011 11:28 AM
Download:
Mirror Download [FCC.gov]
Document ID1570213
Application IDIbN6DjmNfpqytwkP02Q39w==
Document DescriptionManaul
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize83.65kB (1045660 bits)
Date Submitted2011-10-28 00:00:00
Date Available2012-02-09 00:00:00
Creation Date2001-02-02 08:20:15
Producing SoftwareAcrobat Distiller 10.1.1 (Windows)
Document Lastmod2011-10-27 12:39:12
Document Titleuntitled
Document CreatorFrameMaker 7.2
FCC ID Filing: LDK102079P

Navigation menu