Cisco Systems 102081 Cisco Aironet 802.11n Draft 2.0 single band AP without SDR feature User Manual

Cisco Systems Inc Cisco Aironet 802.11n Draft 2.0 single band AP without SDR feature ap2600getstart

a href="https://usermanual.wiki/Cisco-Systems" itemprop="url"> Cisco Systems >

users guide

GETTING STARTED GUIDE Cisco Aironet 2600 Series Access Points1About this Guide2Introduction to the Access Point3Safety Instructions4Unpacking5Configurations6Access Point Ports and Connectors7Configuring the Access Point8Mounting the Access Point9Deploying the Access Point on the Wireless Network10 Troubleshooting11 Declarations of Conformity and Regulatory Information12 Configuring DHCP Option 43 and DHCP Option 6013 Access Point Specificationsap2600getstart.fm Page 1 Thursday, April 5, 2012 2:51 PM
2 1 About this GuideThis Guide provides instructions on how to install and configure your Cisco Aironet 2600 Series Access Point. This guide also provides mounting instructions and limited troubleshooting procedures.The 2600 Series Access Point is referred to as the 2600 series or the access point in this document.2 Introduction to the Access PointThe 2600 series supports high-performing Spectrum Intelligence which sustains three spatial stream rates over a deployable distance with high reliability when serving clients. The 2600 series provides high reliability and overall wireless performance.The 2600 series offers both single-band radios (2.4 GHz in 2601 models) and dual-band radios (2.4 GHz and 5 GHz in 2602 models) with integrated and external antenna options. The access points support full inter-operability with leading 802.11n clients, and support a mixed deployment with other access points and controllers.The 2600 series access point is available in both controller-based (Unified) and standalone (Autonomous) configurations and supports: • Simultaneous single-band or dual-band (2.4 GHz/5 GHz) radios • Integrated antennas on the 2601I and 2602I access point models (AIR-CAP2601I-x-K9 and AIR-CAP2602I-x-K9) • External antennas for rugged 2601E and 2602E access point models (AIR-CAP2601E-x-K9 and AIR-CAP2602E-x-K9)Note The ‘x’ in the model numbers represents the regulatory domain. Refer to “Regulatory Domains” section on page 7 for a list of supported regulatory domains.The features of the 2600 series are: • Processing sub-systems (including CPUs and memory) and radio hardware which supports: –Network management –CleanAir—Automatic detection, classification, location and mitigation of RF interference (not available on autonomous or standalone models) –ClientLink+—BeamForming to 802.11n clients as well as legacy 802.11a/g OFDM clients –VideoStream –Location –WIDS/WIPS –Securityap2600getstart.fm Page 2 Thursday, April 5, 2012 2:51 PM
Download:
Mirror Download [FCC.gov]
Document ID1713155
Application IDqRxxUPYan5sT7CQ3ZUZzCw==
Document Descriptionusers guide
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize109.62kB (1370301 bits)
Date Submitted2012-06-01 00:00:00
Date Available2012-06-01 00:00:00
Creation Date2001-02-02 08:20:15
Producing SoftwareAcrobat Distiller 10.1.2 (Windows)
Document Lastmod2012-04-05 14:50:38
Document Titleap2600getstart.fm
Document CreatorFrameMaker 7.2
Document Author: pfile
FCC ID Filing: LDK102081

Navigation menu