Cisco Systems 102087P Cisco Aironet 802.11ac Dual Band Access Points User Manual

Cisco Systems Inc Cisco Aironet 802.11ac Dual Band Access Points ap3702pgetstart

a href="https://usermanual.wiki/Cisco-Systems" itemprop="url"> Cisco Systems >

Manual

GETTING STARTED GUIDE Cisco Aironet 3702P Access Points1About this Guide2Safety Instructions3Unpacking4Configurations5Access Point Ports and Connectors6Configuring the Access Point7Mounting the Access Point8Deploying the Access Point on the Wireless Network9Troubleshooting10 Declarations of Conformity and Regulatory Information11 Configuring DHCP Option 43 and DHCP Option 6012 Access Point Specificationsap3702pgetstart.fm Page 1 Monday, September 9, 2013 8:58 AM
2 Revised: September 4, 20131 About this GuideThis Guide provides instructions on how to install and configure your Cisco Aironet 3702P Access Point. This guide also provides mounting instructions and limited troubleshooting procedures.The 3702P Access Point is referred to as the access point in this document.2 Safety InstructionsTranslated versions of the following safety warnings are provided in the translated safety warnings document that is shipped with your access point. The translated warnings are also in the Translated Safety Warnings for Cisco Aironet Access Points, which is available on Cisco.com.WarningIMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONSWarningRead the installation instructions before you connect the system to its power source. Statement 1004WarningInstallation of the equipment must comply with local and national electrical codes. Statement 1074WarningThis product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 20A. Statement 1005ap3702pgetstart.fm Page 2 Monday, September 9, 2013 8:58 AM
Download:
Mirror Download [FCC.gov]
Document ID2283256
Application IDpMld31DQrbT8+1TRYqTxRw==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize112.36kB (1404480 bits)
Date Submitted2014-06-02 00:00:00
Date Available2014-06-05 00:00:00
Creation Date2001-02-02 08:20:15
Producing SoftwareAcrobat Distiller 10.1.7 (Windows)
Document Lastmod2013-09-09 08:58:28
Document Titleap3702pgetstart.fm
Document CreatorFrameMaker 7.2
Document Author: pfile
FCC ID Filing: LDK102087P

Navigation menu