Cisco Systems 102092 Cisco Aironet 702W Series Access Points User Manual

Cisco Systems Inc Cisco Aironet 702W Series Access Points ap702Wgetstart

a href="https://usermanual.wiki/Cisco-Systems" itemprop="url"> Cisco Systems >

Contents

Manual

GETTING STARTED GUIDE Cisco Aironet 702W Series Access PointsMarch 20141About this Guide2Introduction to the Access Point3Safety Instructions4Unpacking5Configurations6Access Point Ports and Connectors7Configuring the Access Point8Mounting the Access Point9Deploying the Access Point on the Wireless Network10 Troubleshooting11 Declarations of Conformity and Regulatory Information12 Configuring DHCP Option 43 and DHCP Option 6013 Access Point Specifications
2 1 About this GuideThis Guide provides instructions on how to install and configure your Cisco Aironet 702W Series Access Point. The 702W Series Access Point is referred to as the 702W series or the access point in this document.2 Introduction to the Access PointThe 702W series supports high-performing two spatial stream rates over a deployable distance with high reliability when serving clients. The 702W series provides high reliability and overall wireless performance.The 702W series offers dual-band radios (2.4 GHz and 5 GHz) with integrated internal antennas. The access point supports full inter-operability with leading 802.11n clients.The 702W series access point is available in the controller-based configuration and supports:•Simultaneous dual-band (2.4 GHz/5 GHz) radios•Integrated internal antennas onlyNote The 702W series access points will have the model number AIR-CAP702W-x-K9, where the ‘x’ represents the regulatory domain. Refer to “Regulatory Domains” section on page 4 for a list of supported regulatory domains.The features of the 702W series are:•Processing sub-systems (including CPUs and memory) and radio hardware which supports:–Unified–FlexConnect–Monitor-mode•The following processor features:–128 MB NAND flash size–1 MB NOR flash size–128 MB DDR2 memory bus, x32•2.4 GHz and 5 GHz 802.11n radios with the following features:–802.11n standard compliant–A-MPDU TX–HT Duplicate Mode–2TX x 2RX–2-spatial streams, 300 Mbps PHY rate–Maximal ratio combining (MRC)–Cyclic Shift Diversity (CSD)–MCS0-MCS15; Short or Long Guard Intervals–DFS for UNII-2 and UNII-2 Extended channels, including 0.5us radar pulse detection3 Safety InstructionsTranslated versions of the following safety warnings are provided in the translated safety warnings document that is shipped with your access point. The translated warnings are also in the Translated Safety Warnings for Cisco Aironet Access Points, which is available on Cisco.com.
Download:
Mirror Download [FCC.gov]
Document ID2129625
Application IDHytmIgV6OvGp/QOX8eTafw==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize95.39kB (1192428 bits)
Date Submitted2013-11-27 00:00:00
Date Available2014-01-29 00:00:00
Creation Date2001-02-02 08:20:15
Producing SoftwareAcrobat Distiller 10.1.0 (Windows)
Document Lastmod2013-10-21 06:44:33
Document Titleap702Wgetstart.fm
Document CreatorFrameMaker 7.2
Document Author: matharay
FCC ID Filing: LDK102092

Navigation menu