Cisco Systems XSCLCR15 4.9 GHz WMIC Mini PCI Module User Manual

Cisco Systems Inc 4.9 GHz WMIC Mini PCI Module Compliance statement manual

a href="https://usermanual.wiki/Cisco-Systems" itemprop="url"> Cisco Systems >

User Manual Compliance Statement 1

Corporate Headquarters:Copyright © 2005 Cisco Systems, Inc. All rights reserved.Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USARegulatory Compliance and Safety Information for the Cisco 3200 Mobile Access RouterRead this document before installing or servicing the Cisco 3200 Mobile Access Router. Note Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS 3260) should install, replace, or service the Cisco 3200 Mobile Access Router. Install the system in accordance with the U.S. National Electric Code if you are in the United States.Caution When equipped with the 4.9 GHz Wireless Mobile Interface Card (WMIC), the Cisco 3200 Mobile Access Router is only allowed to operate in the USA. It must operate as a licensed radio as a licensed public safety agency.WarningIMPORTANT SAFETY INSTRUCTIONSThis warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. This document includes the following sections:•Translated Safety Warnings, page 2•European Directives, page 42•Regulatory Standards Compliance, page 43•Regulatory Standards Compliance for the 4.9 GHz Wireless Mobile Interface Card, page 47•EMC Class A Notices and Warnings, page 47•EMC Class B Notices and Warnings, page 49•Radio Frequency Exposure, page 50•Environmental Impact, page 51
2Regulatory Compliance and Safety Information for the Cisco 3200 Mobile Access Router78-16930-02 Translated Safety Warnings•Related Documentation, page 51•Obtaining Documentation, page 51•Documentation Feedback, page 52•Cisco Product Security Overview, page 53•Obtaining Technical Assistance, page 54•Obtaining Additional Publications and Information, page 55Translated Safety WarningsThis section contains the following translated safety warnings:•Statement 202—Installation and Replacement Warning•Statement 213—Unit Grounding Protection Warning•Statement 242—Equipment Grounding Warning•Statement 202—Installation and Replacement Warning•Statement 1003—DC Power Disconnection•Statement 1004—Installation Instructions•Statement 1006—Chassis Warning for Rack-Mounting and Servicing•Statement 1008—Class 1 Laser Product•Statement 1015—Battery Handling•Statement 1017—Restricted Area•Statement 1023—No. 26 AWG•Statement 1024—Ground Conductor•Statement 1029—Blank Faceplates and Cover Panels•Statement 1030—Equipment Installation•Statement 1031—EU Public Network Port•Statement 1032—Lifting the Chassis•Statement 1033—SELV-IEC 60950 DC Power Supply•Statement 1034—Backplane Voltage•Statement 1040—Product Disposal•Statement 1043—Installation Hazard•Statement 1046—Installing or Replacing the Unit•Statement 1051—Laser Radiation•Statement 1052—Installing and Grounding the Antenna•Statement 1064—Grounded Equipment
Download:
Mirror Download [FCC.gov]
Document ID598017
Application IDfTh/06W/bF0A+Yz+WpGUnA==
Document DescriptionUser Manual Compliance Statement 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize237.91kB (2973849 bits)
Date Submitted2005-11-01 00:00:00
Date Available2005-11-01 00:00:00
Creation Date2005-10-20 20:48:52
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2005-10-20 14:10:36
Document TitleCompliance statement manual.pdf
Document CreatorPScript5.dll Version 5.2
Document Author: jsanchez
FCC ID Filing: LDKXSCLCR15

Navigation menu