Clipcomm HCS100 BLUETOOTH STEREO HEADSET User Manual 1
Clipcomm, Inc. BLUETOOTH STEREO HEADSET 1
Clipcomm >
Contents
- 1. users manual 1
- 2. users manual 2
users manual 1
HCS-100 User manual
Bluetooth Stereo Headset
[Table of Contents]
Before use
Package contents
Description of parts
Wearing
Charging
Low battery
Check battery level
How to use
Power on
Power off
Pairing
Connecting
Answering a call
Making a call
Ending a call
Volume control
Functions during a call
Listening to music
Summary of button functions
LED indication and signal sound
Supplement
Troubleshooting
Cautions
Additional information
Standard and specification
Limited warranty
1
2
3
4
4
5
5
6
6
6
7
10
10
11
11
11
13
14
15
16
18
20
21
22
Before use
2
The Clipcomm HCS-100 is a super lightweight and compact
Bluetooth wireless stereo headset producing hi-fi stereo sound
and offers crystal clear sound via noise reduction and echo
cancellation during a phone call using DSP (digital signal pro-
cessing) technology.
[Package contents]
Ensure that the items mentioned below are all included in the
package. If any item is missing, please contact the dealer.
HCS-100 User manual
Bluetooth Stereo Headset
Stereo headset User manual Charger
3
Before use
[Description of parts]
Charging port
Microphone
Status LED
Volume controls
FWD/RWD
Multifunction
button
Ear loop
Ear loop
(Left)
(Right)
[Wearing]
Check the
left/right side of the headset and wear it appropriately.
Adjust the ear loop to fit in your ear if necessary.
[Charging]
Open the cover and insert the charger completely into the
charging slot until the status LED glows red. Note that
connecting the charger while the power is on will turn off the
headset.
The buttons on the headset will not function while charging.
4
Before use
Left
Right
Left
5
[Low battery]
The status LED will flash red with a beeping sound that would
indicate that the battery charge is low.
Charge the battery as soon as the abovementioned
phenomenon is detected.
The headset will turn off when the battery is not charged.
[Check battery level]
By pressing the fast forward button and reward button
simultaneously in standby mode, you can check the bat-
tery level by number of red flashes.
Before use
Charge your headset until the status LED turns off. The unit
will be fully charged in approximately 2.5 h.
WARNING : Do not attempt to charge the HCS-100 with
any charger other than the one provided. Using another
charger may damage or destroy the headset.
Number of
red flashes
Music
streaming time
4 flashes
More
than 7 h More
than 4 h More
than 1 h
Up to
1 h
3 flashes 2 flashes 1 flash
6
[Power on]
1. Press and hold for 2 s.
2. You will hear a beep and the blue status LED will briefly
flash rapidly for 5 times.
[Power off]
1. Press and hold for 5 s.
2. You will hear a beep and the blue status LED will briefly flash
rapidly for 5 times.
[Pairing]
Before using your headset with mobile phone or MP3 player for
the first time, you must pair it with your Bluetooth devices (For
the detailed set up and pairing instructions with Bluetooth devi-
ces, please consult your Bluetooth device user guide).
1. Begin with the headset turned off; then, press and hold
down for 5 s.
2. You will hear two short beeps, and the status LED will first
begin to flash red and then blue.
3. Go to the Bluetooth menu in your mobile phone and search
for stereo headset.
How to use
7
4. Select “HCS-100” from the list of searched devices.
5. When prompted for a passkey, enter 0000.
6. A beep will sound when the devices are paired successfully.
The HCS-100 will turn off automatically if it stays in the “pairing
mode” for over 3 min without being paired to any device. In this
case, you have to reattempt the pairing process (see abovem-
entioned steps). The connection can be made automatically
after pairing depending on the features of different models of
mobile phones.
[Connecting]
To use the headset after pairing (or after losing the connection),
you should connect it to the paired mobile phone. For more
details regarding the connection method, please refer to the
manual of your Bluetooth mobile phone.
Multiconnection
You can connect your HCS-100 with two devices to enable
music playing and phone connectivity at the same time. It
means that your mobile phone will be paired with the headset/
hands-free profile(s) and your MP3 player will be paired with
the A2DP and the AVRCP.
How to use
8
1. Connect your HCS-100 with MP3 player.
2. Power off the HCS-100 by pressing for 5 s (The
connection will drop with MP3 player).
3. Put your HCS-100 in standby mode and connect/pair to
mobile phone by headset/hands-free profiles.
4. Press for once shortly.
5. MP3 player is paired with A2DP and AVRCP and the mobile
phone is paired with the headset/hands-free profile(s).
Auto reconnection
1. When the headset turns off while connecting
The headset will be automatically reconnected without the
paring process when power is supplied. If the headset was
connected in multiconnection, then it will be multi connected.
(the mobile phone connected previously should be within 10
m from the headset).
2. Out of range
The headset will be automatically reconnected when it is
brought back within a 10 m range of the phone within 3 min.
Note that if the headset is out of range in multiconnection
mode, then it will not be automatically reconnected. Please
connect it refer to the next “Connection with the recently
connected device”.
How to use
9
Connection with the recently connected device
HCS-100 can be connected with the recently connected
device as follows.
1. In case of multiconnection
Hands-free function: Press for once briefly.
Stereo headset function: Press for twice briefly.
2. In case of non-multiconnection
Press for once shortly.
How to use
When out of range (greater than 10 m), the connection
between the headset and the Bluetooth device will be
dropped.
If the headset and the Bluetooth device have been
separated for over 3 min, up to 10 min will be required
for auto reconnection.
10
[Answering a call]
The headset and mobile phone will ring simultaneously when
an incoming call is received. You can answer a call by pressing
briefly (The call can also be answered using the mobile
phone). The music will stop temporarily while music is playing
and after call ends, music will be played again.
[Making a call]
Voice dialing*
Press and release once. You will hear the voice-activation
tone; say the registered name on the voice dialing list after one
short beep.
How to use
In case of multiconnection, MP3 player will not be played
depending on the features of different models of devices.
This function is only available if your mobile phone sup-
ports the voice dialing function and the headset is paired
as a hands-free device.
If your mobile phone does not support voice dialing, the
headset will activate the last number redial feature. The
headset may not activate any action; this again depends
on the features of different models of mobile phones.
11
How to use
Last number redialing *
Press and hold for 2 s; this will activate the last number
redial feature. Subject to different models of mobile phone, it
will show you the recently dialed call list; then, you can press
and hold for 2 s again to make a call.
[Ending a call]
To end a call, briefly press .
[Volume control]
Briefly press the volume up or volume down button
located at the side of the headset in order to control the
speaker volume. Eight levels of volume control are available.
[Functions during a call]
Transferring a call*
Briefly press to transfer a call from your mobile phone to
your headset while on a call (the headset and the mobile phone
must be connected prior to this process). To transfer a call from
your headset to your mobile phone, press and hold the volume
up button for 1 s.
12
How to use
Call waiting*
Answer the second incoming call without ending the first call by
pressing for 1 s. To return to the first call, simply press
again for 1 s.
Call reject*
To activate the call reject function, press for 1 s when an
incoming call is detected.
Mute
To activate the mute function, press the volume down button
for 5 s; this will mute the sound. When the call mute function is
activated, you will hear a beep periodically. To release the call
mute function, press the volume down button for 5 s again.
The *(star) mark indicates that these functions are only
available with a hands-free profile, and the connected
mobile phone should support these functions. For addi-
tional information regarding these functions, refer to the
user manual of your Bluetooth mobile phone.