Cobra Electronics IRAD100 RADAR DETECTOR WITH BLUETOOTH User Manual

Cobra Electronics Corporation RADAR DETECTOR WITH BLUETOOTH Users Manual

a href="https://usermanual.wiki/Cobra-Electronics" itemprop="url"> Cobra Electronics >

Users Manual

Quick Start GuidePrinted in China Part No. 480-667-P Version BThank you for purchasing Cobra iRadar™, the world’s first connected radar/laser/red light camera detector. Cobra iRadar uses Bluetooth® wireless technology to connect your iPhone®/iPod touch® to display radar alerts and change settings.Follow these simple steps to get your Cobra iRadar up and running.Cobra iRadar is made for: iPod touch (3rd Generation) iPhone 3GSiPhone 3G.NOTE: *Location-based alerts and GPS settings available only with iPhone. Only radar/laser alerts and settings will work with iPod touch 3rd generation or higher.Connecting with Cobra iRadarPlug in your Cobra iRadar detector unit using the included cigarette lighter adapter.Turn unit on. A red LED will light.On your iPhone/iPod touch, enter the Settings menu.Press General, then Bluetooth. Make sure Bluetooth is switched to ON.NOTE: This device complies with part 15 of FCC rules: Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation.CAUTION: Modifications or parts not approved by Cobra Electronics Corporation may violate FCC Rules and void authority to operate this equipment.
iRadar 100 should appear under Devices.Note: Your iPhone/iPod touch may take 30 seconds to one minute to recognize the device. It will initially appear as “Headset” and will then turn into iRADAR 100. If you cannot see the device, try restarting both iRadar and your iPhone/iPod touch and re-do steps 1 through 5.Press iRADAR 100, then press Pair. The LED on the detector unit will flash blue. When pairing has been completed, it will turn solid blue.Press Yes to install Cobra iRadar application from the App Store. If you already have the Cobra iRadar App, you can press NO.Now open the App and enjoy using iRadar!Cobra iRadar AppDashboardDisplay speedometer, compass and car battery voltage. View Map*View user-marked locations, red light camera locations in your area and GPS-based speed & direction of travel.SettingsConfigure your Cobra iRadar settings. Note: All radar/laser/red light camera detector settings will be inactive if you are not paired with Cobra iRadar or are out of range.To download the App manually, enter the App Store on your iPhone/iPod touch and search for “Cobra iRadar” and follow the onscreen instructions.For more information about AURA™, please visit: www.cobra.com/AURA.For more information on iRadar accessories, go to: www.cobrairadar.com.
Download: Cobra Electronics IRAD100 RADAR DETECTOR WITH BLUETOOTH User Manual
Mirror Download [FCC.gov]Cobra Electronics IRAD100 RADAR DETECTOR WITH BLUETOOTH User Manual
Document ID1328072
Application IDRlUhG6lh9c3IKRcaYJXSuQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize97.57kB (1219630 bits)
Date Submitted2010-08-17 00:00:00
Date Available2010-09-30 00:00:00
Creation Date2010-08-11 15:29:41
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2010-08-11 15:29:45
Document TitleUsers Manual
Document CreatorAdobe InDesign CS4 (6.0.5)
FCC ID Filing: BBOIRAD100

Navigation menu