Cobra Electronics PR2000WX GMRS User Manual User Instructions

Cobra Electronics Corporation GMRS User Instructions

Contents

User Instructions

1
How to Use Your Cobra
Professional 2-Way Radio
Features of This Product
• UHF FM Frequencies
• 10 Weather Channels
• Weather Alert
• No Air Time Fees
• Up to 5 Mile Range
• 15 GMRS Channels
(7 shared FRS Channels)
• 38 CTCSS Subchannels
• LCD Function Display
• Talk Confirmation Tone
• Call/Ring Button
• Auto Battery Saver Circuity
• Auto Squelch
• 10 Memory Locations
• Memory Scan
• Dual Watch
• Channel and CTCSS Scan
• Lock Key
• Call Notification
• Belt Clip
• Rubberized Cabinet Grips
Contents
Features..................................................................................................1
The GMRS Story..................................................................................A1
FCC Warnings
Included Accessories
Controls & Indicators.......................................................................A2
Our Thanks to You.............................................................................A3
Customer Support..........................................................................A3
Operating your microTalk
Battery Installation.........................................................................2
Turning On........................................................................................3
LCD Display.......................................................................................4
Auto Battery Power Saver............................................................5
Hi/Lo Power......................................................................................5
Select Main Channel (1-7)...........................................................6
Select CTCSS Subchannel (00-38)............................................7
Battery Low.......................................................................................9
Talking To Another Party .............................................................10
Talk Confirmation Tone................................................................11
Listening For Another Party.......................................................11
Calling Another Party....................................................................12
Auto Squelch....................................................................................14
Maximum Range Extender.........................................................14
External Microphone/Speaker Jack .........................................15
Advanced Features...........................................................................16
Listening to Weather Channels.................................................16
Programming Memory Locations............................................20
Scan Function..................................................................................26
Memory Scan Function................................................................29
Tone Settings...................................................................................31
Lock Function ..................................................................................33
Dual Watch........................................................................................34
microTalk Range ................................................................................37
Making Life Easier And Safer.......................................................38
Frequency Ranges.............................................................................40
Caring for Your microTalk .............................................................42
microTalk Professional Specifications....................................43
Limited Two Year Warranty...........................................................44
Optional Accessories.......................................................................45
Order Form...........................................................................................46
If You Think You Need Service.....................................Back Cover
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 1
2 3
OperationOperation
Note
Use high quality “AA”batteries,
such as alkaline,NiMH or
Ni-Cad.
Incorrect positioning can dam-
age both the batteries and the
unit.
See Accessories on page 45.
Charge ports are located on
side of unit.
Note
When batteries are low or need
charging the () BATT
LOW indicator will blink.
Replace alkaline batteries.
Battery
Installation
Pull lock tab down
and lift door up
(towards you) to
remove battery
cover.
Insert six “AA” bat-
teries.Position bat-
teries according to
polarity markings.
2
1
Install Batteries
Note
Whenever the unit is on,you
can receive communications.
Turning On
Your microTalk
Professional
Antenna
Turning On Your microtalk Professional
Turn the Volume control clockwise to switch
power on.Set volume to desired level.Turn the
Volume control counter-clockwise to turn
power off.
The radio is equipped
with a SMA female anten-
na connector and a
matching UHF antenna.
Place top of unit with
antenna on connector,
turning clockwise until
tight.You can replace this
antenna with an optional
mobile antenna when
using the radio inside a
car,or a base antenna in a
fixed location.
Antenna
TURN KNOB
CLOCKWISE
PLACE ON
CONNECTOR.
TURN
CLOCKWISE
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 2
4 5
OperationOperation
Note
The Auto Battery Save Circuit
does not effect the unit’s ability
to receive incoming
transmissions.
Auto Battery Power Saver
Your microTalk Professional has a unique circuit
designed to extend battery life. If there are no
transmissions within 10 seconds,the unit will
automatically switch to mode.
P. SAVER
High/Low Power Switch
When in close proximity to other party,or during
clear weather conditions you can switch from
High to Low Power to extend battery life.
The icon will flash.
P. SAVER
Auto Battery
Power Saver
High/Low
Power Switch
Illuminating
the Display
Illuminating the Display
Press and release MON Button to illuminate
display for ten seconds.
MON
PTT
MON
PRESS AND
RELEASE
POWER
SAVER
Press & Release the
lock button and it
will switch from
High to Low
PRESS AND
RELEASE
QUICKLY
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 4
6 7
OperationOperation
Note
CTCSS (Continuous Tone
Controlled Squelch System) is
an advanced subcoding system
that allows segmentation of a
main channel.
Note
If you push and hold the Mode
Button,the LCD display will
cycle through the different
functions.
Select CTCSS
Subchannel
Select CTCSS Subchannel (00-38)
The CTCSS (Continuous Tone Controlled Squelch
System) is a great convenience when you are in
an area with many radios.It acts like a gate to
transmissions from other radios.Once your radio
is set to a CTCSS code,you will only hear trans-
missions from other radios on the same channel
and the same CTCSS code.
Turn on the microTalk Professional.An audible
“tone”will indicate the unit is on and then the
LCD will self-test for 3 seconds and then go to
Operational Mode.
1
continued
Select main channel by pressing the
Channel button up or down.
2
Note
Units must be on same
channel and subchannels to
communicate.
Note
Press and hold Channel
up or down Buttons for fast
channel advance.
Select
Channels
Select Channels (1-15)
Channels 1-7 are shared with FRS radios.
Turn on microTalk Professional.An audible
“tone”will indicate the unit is on and the LCD
will self-test for 3 seconds and then go to
Operational Mode.
Select channel by pressing and releasing the
Channel button up or down.
2
1
PRESS
UP OR DOWN
PRESS
UP OR DOWN
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 6
8 9
OperationOperation
Select CTCSS
Subchannel
Note
Press and hold Channel
Button up or down for fast chan-
nel advance.
Press and release Function Button.Small
numbers flash next to channel display on LCD.
3
Select CTCSS Subchannel
Select subchannel number by pressing and
releasing the Channel Button up or down.
4
PRESS AND
RELEASE
PRESS
UP OR DOWN
When desired subchannel is displayed press and
release Enter Button.If key audible tone is
on,an audible tone will confirm your selection.
5
Battery Low
When in normal use the ( ) icon may begin
flashing. This is a warning to you that your
batteries are getting low.
Replace alkaline batteries as soon as possible.
Battery Low
Note
When battery capacity is at the
1/4 level it is recommended that
you replace alkaline batteries,or
recharge (if you are using
RECHARGEABLE batteries) using
CA-45C charger adapter.
PRESS AND
RELEASE
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 8
11
Operation Operation
Talk
Confirmation
Tone
Standby Mode
Standby Mode
When finished talking, Release PTT Button to
receive incoming transmissions.
Your microTalk Professional is always in the stand-
by mode when the PTT Button is not pressed
and you are not in function mode. See Advanced
Features section on page 16.
PTT
1
Talk Confirmation Tone
Your listener will hear an audible
tone when you release
the PTT Button.
This alerts the other party that
you are finished talking and it’s
OK for them to begin talking.
PTT
Note
While PTT Button is depressed
you cannot receive incoming
calls.
Note
When you release the PTT
Button,the person you are
talking to will hear a tone indi-
cating that it’s ok to talk. See
Talk Confirmation Tone section
on page 11.
Press and hold PTT Button.
The ( ) icon will appear.
PTT
1
PTT
MON
Release PTT Button and listen
for response.
PTT
3
Hold mic about 2 inches from mouth.
Speak in a normal voice.
2
PTT
MON
Talking to
Another
Party
PRESS AND
HOLD
RELEASE FOR
RESPONSE
10
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 10
12 13
Operation
Select desired channel by pressing and
releasing Channel Button up or down.
Both the calling and receiving units must be
on same channel and subchannel for the call
function to work.
2
Operation
Calling
Another
Party
Calling Another Party
To alert another party that you wish to
communicate:
Turn on your microTalk Professional 2-way
radio. An audible “tone”will indicate the unit is
on.The LCD will self-test for 3 seconds and
then to operational mode.
1
TURN KNOB
CLOCKWISE
PRESS
UP OR DOWN
Press and release Call Button.The ( )
indicator icon will flash and the ( ) icon will
remain on for 3 seconds.The unit you are
calling will hear a 2 second ring tone.
Your microTalk Professional is always in the
standby mode when the PTT Button is not
depressed.
PTT
4
3
Note
Your incoming “Call”audio ring-
ing level is dependent on your
unit’s volume setting.
PRESS AND
RELEASE
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 12
14 15
External Microphone/Speaker Jack
Your microTalk Professional 2-Way Radio can be
fitted with a variety of accessories,(not included)
freeing your hands for other tasks.
To attach an external microphone/speaker
accessory:
External
Microphone/
Speaker Jack
External Microphone/Speaker Jack
SPK
MIC
CHG
Note
External microphone/speaker
(item #FA-SM) is not included
with this unit.See Accessories
Section on page 45.
Operation
Auto Squelch
Maximum
Range
Extender
Note
To learn more about the range
of your microTalk Professional,
see page 37.
Range is dependent on
battery condition and
geographic territory.
Auto Squelch
Your microTalk Professional is equipped with Auto
Squelch,which automatically shuts off weak trans-
missions and unwanted noise due to terrain con-
ditions or if you have reached your range limit.
Maximum Range Extender
Auto squelch can be temporarily removed to allow
all signals to enter (Maximum Range Extender).
Press and hold Button to allow all signals
to enter.
MON
1
Auto Monitor
Auto Monitor
When the signal you want to hear is consistently
weak,you may place the radio in Maximum
Range mode without having to constantly hold
the button:Press and hold the Button for five
seconds.You will hear an audible beep confirma-
tion.To return to normal operation,momentarily
press the Button again or change channels.
MON
MON
PTT
MON
PLUG IN
HERE
PRESS AND
HOLD Insert plug into SPK/MIC hole on side
of unit.
1
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 14
16 17
Listening to Weather Channels
Turn on your microTalk Professional 2 -way
radio.An audible “tone”will indicate the unit is
on.The LCD will go through a 3 second self
test and then go to operational mode.
1
Listening to
Weather
Channels
Press and release Function Button until
weather icon appears.The last weather
channel tuned will be displayed.
2
Press Channel Button up or down to
select the appropriate channels for your area.
3
Listening to
Weather
Channels
Advanced FeaturesAdvanced Features
PRESS AND
RELEASE
PRESS AND
RELEASE
PRESS AND
RELEASE
To exit weather reception,press the Enter
Button.The radio will go to the last channel
and CTCSS sub-channel.
4
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 16
19
Advanced Features
continued
18
Advanced Features
Advanced Features
Your microTalk Professional has many advanced
features
not found on other 2-way radios.
These include:
•10 Memory Storage Location and Recall
•Memory Scan
•Dual Watch
•Channel/Sub Channel Scan
•Tone Indicator Settings:
– Key Stroke Tone
– Talk Confirmation Tone
•Lock Key
Advanced
Features
Turning
Weather Alert
ON or OFF
Turning Weather Alert ON or OFF
Press Function Button until ( ) icon
flashes.
Push Channel Button to switch
between ON or OFF
Then press Enter to lock in selection.The
radio will double beep to confirm.
The ( ) icon will flash to show it is enabled.
4
3
2
1
PRESS AND
RELEASE
PRESS AND
RELEASE
Weather Alert
Weather Alert
A tone alert will be automatic when NOAA
activates emergency weather notification.
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 18
Advanced Features
21
Programming
Memory
Locations
Advanced Features
20
Press and release Function Button again.
Main Channel and ( ) Icon will flash.
MEM
7
4
Select desired main channel you wish to store
(1-15) by pressing Channel Button up
or down.
5
Programming Memory Locations continued
Note
Once you enter memory
mode you can talk and
listen to any channel you
select after programming is
complete. See Using
Memory Locations section
on page 24.
PRESS AND
RELEASE
PRESS AND
RELEASE
Press and release Function Button until
( ) icon and a memory location flashes.
MEM
2
Select memory location you wish to change
by pressing Channel Button up or
down.
3
Programming Memory Locations
Your microTalk Professional has 10 memory (0-9)
locations for storing your most frequently used
channels.
Turn on microTalk Professional.An audible
“tone”will indicate the unit is on and then the
LCD will go through a 3 second self-test and
then go to Operational Mode.
1
PRESS AND
RELEASE
PRESS AND
RELEASE
Programming
Memory
Locations
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 20
Advanced Features
23
Advanced Features
22
Programming Memory Locations continued
Your microTalk Professional will stay in the sub-
channel section until you:
Press and release Enter Button to return to
Operational Mode.
or...
Press and release Function Button to pro-
ceed to next Function Mode (Scan).
B
A
Note
If you push and hold the
Function Button,the LCD
display will cycle through
the different functions.
Programming
Memory
Locations
Press the Function button to set the main
channel in memory and move to subchannel
selection. The subchannel begins flashing.The
( ) icon will remain flashing.
MEM
6
Select desired subchannel you wish to store
(00-38) by pushing Channel Button up
or down.
7
PRESS AND
RELEASE
PRESS AND
RELEASE
Programming
Memory
Locations
Note
Press and hold the Up/
Down channel button
for fast channel advance.
Note
You can push and hold the
Talk Button to begin talking
anytime.
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 22
Advanced Features
25
Advanced Features
24
Press and hold PTT button and talk.Your radio
will stay on this recalled location until you exit
out of memory function mode.
Repeat step 2 for recalling other memory
locations.
To exit the Memory Mode and return to
Operational Mode:
4
PTT
3
Press and release Enter button.
5
Using Memory Locations continued
PTT
MON
Using
Memory
Locations
PRESS AND
HOLD
PRESS AND
RELEASE
Select desired memory location you wish to
recall (0-9) by pushing the Channel
button.
2
Press and release Function Button until
( ) icon and a memory location flashes.
MEM
1
Memory Channel Recall/Talk
To recall a channel in memory:
PRESS AND
RELEASE
PRESS AND
RELEASE
Using
Memory
Locations
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 24
Advanced Features
27
Advanced Features
26
Press Channel button and the unit will
begin scanning the main channels.
Unit will continue to scan all main channels and
stop if an incoming transmission is detected.
Your microTalk Professional will pick it up for 10
seconds.Within 10 seconds you can:
Press and hold Talk button and talk.Your
radio will return to operational mode on
that channel.
or...
Press Channel button to rescan the main
channel.
or...
Proceed to subchannel scan on next page.
C
B
PTT
A
4
3
Scan Function continued
Scan Function
PRESS
Scan Function
Turn on microTalk Professional.An audible
“tone”will indicate the unit is on and then the
LCD will go through a 3 second self-test and
then go to Operational Mode.
1
Press and release Function button until
( ) icon and Main Channel flashes.
SCAN
2
PRESS AND
RELEASE
Note
The microTalk Professional
“zeros out”the subchannels
to allow scanning of the
main channels.
Scan Function
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 26
Advanced Features
29
Memory Scan Function
Memory Scan conveniently allows you to access fre-
quently used channel and sub-channel combinations.
Turn on your microTalk Professional 2-way
radio.An audible “tone”will indicate the unit is
on.The LCD will go through a 3 second self
test and then go to operational mode.
1
Memory Scan
Function
Press and release Function Button until
MEM and SCAN icons flash.
2
Advanced Features
28
PRESS AND
RELEASE
Press and release Function Button and
subchannel and scan icon will flash.
1
To scan subchannels:
Press and release Channel button and
subchannel scanning begins and stops when
an incoming transmission is detected.
Your microTalk Professional will pick it up for 10
seconds.Within 10 seconds you can:
Press and hold Talk Button and talk.Your radio
will return to operational mode on that channel.
or, To exit the Scan Mode and return to
Operational Mode, press and release Enter
Button.
A
2
PRESS
PRESS AND
RELEASE
Note
If you wish to proceed to the
next function mode,push
and release Function Button.
(Memory Scan).
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 28
Advanced FeaturesAdvanced Features
Button Tone
To activate press Enter Button until
confirmation beep and ( ) icon appears.
To deactivate press Enter Button until confir-
mation beep and ( ) icon disappears.
BEEP
2
BEEP
1
PRESS AND
HOLD
30 31
Button Tone
Settings
Talk Confirmation Tone Indicator
To temporarily eliminate the Talk Confirmation Tone:
PRESS AND
RELEASE
Note
When pressing the radio but-
ton,the user will now hear
an audible tone.
Press Channel button to begin the
scan mode.
The radio will stop at the first memory
location for 1/2 second.
• If no signal is detected it will move on.
• If a signal is detected,it will stay at that loca-
tion for 10 seconds. If you want to stay at
that location for more than 10 seconds,press
and release the PTT button.
4
3
Memory Scan Function continued
PRESS AND
RELEASE
Memory Scan
Function
Press Function Button until flashes.
1
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 30
32 33
Advanced FeaturesAdvanced Features
32
Press and hold for one second Lock Button.If
the Beep Function is ON you will hear an audible
confirmation.Most buttons are locked.
To “unlock”press and hold for one second
Lock Button again.If the Beep Function is ON
you will hear an audible confirmation.Buttons
are “unlocked.”
2
1
Lock Function
The purpose of the Lock Function is to lock most
buttons to avoid accidental operation.
To engage the Lock Function:
PRESS AND
RELEASE
Note
Call Button,MON Button and
PTT Button do not lock and
are fully operational while
the unit is locked.
The unit cannot lock while in
Function Mode.
Lock Function
Press Channel Button up or down to
turn on or off.
To set option:
Press Enter Button.This will immediately
enter new setting and return to operational
mode.
Press Function Button.This will enter new
setting and go to new Function Mode;
Wait 10 seconds.It will go to Operational
Mode with new setting.
C
B
A
2
PRESS AND
RELEASE
Cobra PR 2000 manual M(4217)A 6/14/00 9:05 AM Page 32
Advanced Features
35
Advanced Features
34
Dual Watch
Function
Press Function Button to set CTCSS.
CTCSS channel numbers will flash.
Press Channel Button up and down
to select CTCSS.
6
5
Press Enter Button.This will store the second
channel and CTCSS and start Dual Watch.
To terminate Dual Watch and go to Normal
Mode,press Enter or PTT Button.

Navigation menu