Cogent Systems SARII STAND ALONE READER II User Manual

Cogent Systems Inc STAND ALONE READER II

a href="https://usermanual.wiki/Cogent-Systems" itemprop="url"> Cogent Systems >

Users Manual

SARII 使用说明/USER MANUAL 一、检测： Check 1、 将标准洁净的测试条样本，正确插入 Reader 中（滴试剂一端先插入，直到全部插入顶到插槽底部），如图； Insert the ticket into the Reader. Make sure the ticket is standard and clean.(The dripping end first and ensure it contact the end of the groove). See the following picture:: （INSERT） 2、 按下绿色按钮，开始检测样本，直到设备 LCD 显示五条黑（或白）竖线，检测结束，再次按下绿色按键，退出。 Press down the green button and the ticket is checked. Until the LCD shows five lines the check is completed. Then you can press the green button again and exit. 二、数据和图象的传输 Data and Image transmission： （一） USB – COM 传输： USB – COM transmission 1、 （USB-COM 驱动已经正确安装）设备接入 PC ，打开 PC 端程序“CogentTicketDemo.exe”，选择正确的 COM 口，进行连接，如下图： (Make the driver of the USB-COM is installed well)Connect the PC and open the application program“CogentTicketDemo.exe”. Please choose the right COM port and connect. See the following picture::
Download:
Mirror Download [FCC.gov]
Document ID868855
Application IDNraDiSdBVeImnOkZrv5Peg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize35.14kB (439210 bits)
Date Submitted2007-11-15 00:00:00
Date Available2007-11-19 00:00:00
Creation Date2007-11-06 09:06:37
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2007-11-06 14:41:56
Document TitleMicrosoft Word - user manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: maggie
FCC ID Filing: TLDSARII

Navigation menu