Compex Systems WLE1216V220 WiFi Module User Manual WLE1216V2 20 rev2

Download:
Mirror Download [FCC.gov]
Document ID	3795095
Application ID	B0sJu9nYFCFIVhJuKB4JiQ==
Document Description	WLE1216V2-20-User Manual rev2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	138.68kB (1733498 bits)
Date Submitted	2018-03-26 00:00:00
Date Available	2018-03-28 00:00:00
Creation Date	2018-01-02 10:28:35
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2018-03-24 12:44:01
Document Title	WLE1216V2-20-User Manual rev2
Document Creator	Adobe InDesign CS6 (Windows)

wireless modules
4x4 802.11b/g/n Mini PCIe WiFi Module
Standard size form factor
Model: WLE1216V2-20
KEY FEATURES
Qualcomm Atheros ‘Cascade’ QCA9984
Heat sink allows free air operation
IEEE 802.11b/g/n compliant, up to 800Mbps
Mini PCI Express 2.0 interface
Supports Spatial Multiplexing
Maximal Ratio Combining (MRC), Space Time Block
Code (STBC)
Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w ,
and z standards
Designed for High Bandwidth Enterprise Wireless
Access Points
PR PE
EL X
IM Y
IN ST
A EM
Y S
•
•
•
•
•
•
•
Chipset
System Memory
Specifications
Host Interface
Operating Voltage
Antenna Connector
Frequency Range
Power Consumption
Supported Operating System
Modulation Techniques
Temperature Range
Humidity
ESD Sensitivity
Dimensions (W x H x D)
QCA9984
256Kbit serial I²C bus EEPROM
Mini PCI Express 2.0 Standard
3.3V
4x U.FL
2.412 ~ 2.462 GHz
6.68W (Max)
CompexWRT or OpenWRT/LEDE
CCK, OFDM: BPSK, QPSK, 16-QAM, 64-QAM
Operating: -20ºC to 70ºC
Storage: -40ºC to 90ºC
Operating: 5% to 95% (non-condensing)
Storage: Max. 90% (non-condensing)
Class 1B
29.9 x 50.8 x 12.9 mm
Last Updated: 02/01/18
wireless modules
Feature Guide
U.FL connectors
CH3
CH2
Mini PCIe 2.0
edge connector
PR PE
EL X
IM Y
IN ST
A EM
Y S
CH1
CH0
Mechanical Dimensions
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.
Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,
Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 02/01/18 WH SY HB
wireless modules
Packaging Content
Item
Quantity
WLE1216V2-20 Wireless Module
Item Code
PR PE
EL X
IM Y
IN ST
A EM
Y S
Ordering Configuration
Chipset
Form Factor
Card Information
QCA9984
Standard size card
4x4 802.11b/g/n
2.4GHz
Dimensions
Weight
Dimensional Weight
385 x 207 x 76 mm
1.514 kg
1.5 kg
422 x 410 x 240 mm
8.3 kg
9 kg
WLE1216V2-20 7A00001.01
Packaging Information
Packaging Type
Packing Box (50 units)
Carton Box
(5 packing boxes / 250 units)
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.
Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,
Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 02/01/18 WH SY HB
Compliance Information
FCC 15.105
For a Class B digital device or peripheral, the instructions furnished the user shall
include the following or similar statement, placed in a prominent location in the text of
the manual:
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC 15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC 15.21
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC 15.203
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
RF exposure warning
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
OEM Integration Instructions：
This device is intended only for OEM integrators under the following conditions：
The module is only limited to installation in mobile applications. The antenna must be
installed such that 20 cm is maintained between the antenna and users，and the
transmitter module may not be co-located with any other transmit or antenna. The
module shall be only used with the integral antenna(s) that has been originally tested
and certified with this module.
As long as 3 conditions above are met，further transmitter test will not be required.
However，the OEM integrator is still responsible for testing their end-product for any
additional compliance requirement with this module installed (for example, digital
device emission, PC peripheral requirements，etc.)
IMPORTANT NOTE：
In the event that these conditions cannot be met (for example certain laptop
configuration or co-location with another transmitter), then the FCC authorization for
this module in combination with the host equipment is no longer considered valid and
the FCC ID of the module cannot be used on the final product. In these and
circumstance，the OEM integrator will be responsible for re-evaluating. The end
product (including the transmitter) and obtaining a separate FCC authorization
The final end product must be labeled in a visible area with the following: “Contains
Transmitter Module FCC ID: TK4WLE1216V220 or Contains FCC ID:
TK4WLE1216V220”
The module will be restricted on these host (Detail information show as below)
Manufacturer: Compex Systems Pte Ltd
Product name：Client Terminal
Product Model Number：WPJXXX
Antenna Type
Frequency Band
TX Paths
(GHz)
Max Peak Gain
(dBi)
Dipole Antenna
2.4
Panel Antenna
2.4
11
Note: The device didn’t support beam-forming technology and Cyclic Delay Diversity (CDD)
technology, and the transmit signals are uncorrected, so no add array gain to the band power and
band PSD.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Warning                         : Invalid secondary xref table
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Create Date                     : 2018:01:02 10:28:35+08:00
Metadata Date                   : 2018:01:02 10:31:39+08:00
Modify Date                     : 2018:01:02 10:31:39+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:3cb392cb-61b7-462c-81e1-042d9e0ccb09
Original Document ID            : xmp.did:BC0FFBCC2D21E511A95187C14A07EB95
Document ID                     : xmp.id:FB8D016F64EFE711BAF1A3E32A472E0A
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:FA8D016F64EFE711BAF1A3E32A472E0A
Derived From Document ID        : xmp.did:F98D016F64EFE711BAF1A3E32A472E0A
Derived From Original Document ID: xmp.did:BC0FFBCC2D21E511A95187C14A07EB95
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2018:01:02 10:28:35+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 5
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools