Compex Systems WLE1216V520 WiFi Module User Manual WLE1216V5 20 rev2

Download:
Mirror Download [FCC.gov]
Document ID	3667391
Application ID	q2wkQ/5mT1XTBSEgBYT5xA==
Document Description	WLE1216V5-20-User Manual rev2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	134.47kB (1680868 bits)
Date Submitted	2017-12-08 00:00:00
Date Available	2017-12-13 00:00:00
Creation Date	2017-07-06 18:21:16
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2017-12-08 18:22:58
Document Title	WLE1216V5-20-User Manual rev2
Document Creator	Adobe InDesign CS6 (Windows)

wireless modules
4x4 Wave-2 802.11ac/a/n Mini PCIe WiFi Module
Full size form factor with 80+80MHz bandwidth support
Model: WLE1216V5-20
KEY FEATURES
Qualcomm Atheros ‘Cascade’ QCA9984
Heat sink allows free air operation
IEEE 802.11ac compliant & backward compatible with
802.11a/n, up to 1733Mbps
Multi-user MIMO (MU-MIMO)
4 spatial streams (4SS) at 80MHz
2 spatial streams (2SS) at 80+80MHz
Mini PCI Express 2.0 interface
Supports Spatial Multiplexing
Low-Density Parity Check (LDPC) Codes
Maximal Ratio Combining (MRC), Space Time Block
Code (STBC)
Supports IEEE 802.11d, e, h, i, j, k, r, u, v time stamp, w ,
and z standards
Supports Dynamic Frequency Selection (DFS)
Designed for High Bandwidth Enterprise Wireless
Access Points
PR PE
EL X
IM Y
IN ST
A EM
Y S
•
•
•
•
•
•
•
•
•
•
•
•
Chipset
System Memory
Specifications
Host Interface
Operating Voltage
Antenna Connector
QCA9984
256Kbit serial I²C bus EEPROM
Mini PCI Express 2.0 Standard
3.3V
4x U.FL
Frequency Range
5.180 ~ 5.825 GHz
Power Consumption
Modulation Techniques
Supported Operating System
Temperature Range
Humidity
ESD Sensitivity
Dimensions (H x W x D)
8.5W (Max)
OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
CompexWRT
Operating: -20ºC to 70ºC
Storage: -40ºC to 90ºC
Operating: 5% to 95% (non-condensing)
Storage: Max. 90% (non-condensing)
Class 1B
50.8mm x 29.9mm x 12.9mm
Last Updated: 06/07/17
wireless modules
Feature Guide
U.FL connectors
CH3
CH2
Mini PCIe 2.0
edge connector
PR PE
EL X
IM Y
IN ST
A EM
Y S
CH1
CH0
Mechanical Dimensions
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.
Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,
Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 06/07/17 WH XG SB SY HB
wireless modules
PR PE
EL X
IM Y
IN ST
A EM
Y S
Heat Dissipation Options
Using the pre-installed heatsink for heat dissipation
Using a custom design metal enclosure for heat dissipation
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.
Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,
Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 06/07/17 WH XG SB SY HB
wireless modules
Packaging Content
Item
Quantity
WLE1216V5-20 Wireless Module
Item Code
PR PE
EL X
IM Y
IN ST
A EM
Y S
Ordering Configuration
Chipset
Form Factor
Card Information
QCA9984
Standard size card
4x4 802.11ac/a/n
5GHz Wave 2
Dimensions
Weight
Dimensional Weight
385 x 207 x 76 mm
1.514 kg
1.5 kg
422 x 410 x 240 mm
8.3 kg
9 kg
WLE1216V5-20 7A00001.01
Packaging Information
Packaging Type
Packing Box (50 units)
Carton Box
(5 packing boxes / 250 units)
Copyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.
Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate,
Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.
Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 06/07/17 WH XG SB SY HB
Compliance Information
FCC 15.105
For a Class B digital device or peripheral, the instructions furnished the user shall
include the following or similar statement, placed in a prominent location in the text of
the manual:
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC 15.19
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC 15.21
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC 15.203
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
RF exposure warning
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
OEM Integration Instructions：
This device is intended only for OEM integrators under the following conditions：
The module is only limited to installation in mobile applications. The antenna must be
installed such that 20 cm is maintained between the antenna and users，and the
transmitter module may not be co-located with any other transmit or antenna. The
module shall be only used with the integral antenna(s) that has been originally tested
and certified with this module.
As long as 3 conditions above are met，further transmitter test will not be required.
However，the OEM integrator is still responsible for testing their end-product for any
additional compliance requirement with this module installed (for example, digital
device emission, PC peripheral requirements，etc.)
IMPORTANT NOTE：
In the event that these conditions cannot be met (for example certain laptop
configuration or co-location with another transmitter), then the FCC authorization for
this module in combination with the host equipment is no longer considered valid and
the FCC ID of the module cannot be used on the final product. In these and
circumstance，the OEM integrator will be responsible for re-evaluating. The end
product (including the transmitter) and obtaining a separate FCC authorization
The final end product must be labeled in a visible area with the following: “Contains
Transmitter Module FCC ID: TK4WLE1216V520 or Contains FCC ID:
TK4WLE1216V520”
The module will be restricted on these host (Detail information show as below)
Manufacturer: Compex Systems Pte Ltd
Product name：Access Point
Product Model Number：WPJXXX
This host is used for point-to-point access point (client terminal) that will provide
network service through LAN port.
No.
Antenna
Manufacturer
Frequency
Max Peak
Band
Gain
(MHz)
(dBi)
Exceltek Electronics Technology
2400 ~ 2500
3.0
Co., Ltd.
5150 ~ 5850
5.0
2400 ~ 2500
2.2
5150 ~ 5850
3.5
2400 ~ 2500
2.5
5150 ~ 5850
4.6
5150 ~ 5850
10.0
Wi-Fi External Antenna List (5GHz 4*4 MIMO)
1#
Omni Directional
2#
Omni Directional
3#
Omni Directional
4#
Omni Directional
Laird Smart Technology Co., Ltd.
Linx Technologies
Kenbotong Technology Co., Ltd.
Note 1: The device didn’t support beam-forming technology and Cyclic Delay Diversity (CDD)
technology, and the transmit signals are uncorrected, so no add array gain to the band power and
band PSD.
Note 2: We selected the max peak gain antenna 4# to perform all RF testing.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Warning                         : Invalid secondary xref table
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Create Date                     : 2017:07:06 18:21:16+08:00
Metadata Date                   : 2017:07:06 18:24:18+08:00
Modify Date                     : 2017:07:06 18:24:18+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:aab5d1a7-30f3-453c-9de4-69551852c5df
Original Document ID            : xmp.did:BC0FFBCC2D21E511A95187C14A07EB95
Document ID                     : xmp.id:8B8570BD3462E711A821FEAC1502107A
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:8A8570BD3462E711A821FEAC1502107A
Derived From Document ID        : xmp.did:51CA0DCF115BE7118B94C5C480F0C40F
Derived From Original Document ID: xmp.did:BC0FFBCC2D21E511A95187C14A07EB95
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2017:07:06 18:21:16+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 6
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools