Compex Systems WLM54GP23 WIRELESS-G 23DBM NETWORK MINI PCI ADAPTER User Manual

Compex Systems Pte Ltd WIRELESS-G 23DBM NETWORK MINI PCI ADAPTER Users Manual

a href="https://usermanual.wiki/Compex-Systems" itemprop="url"> Compex Systems >

Users Manual

This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users. For laptop installations, the antenna must be installed to ensure that the proper spacing is maintained in the event the users places the device in their lap during use (i.e. positioning of antennas must be placed in the upper portion of the LCD panel only to ensure 20 cm will be maintained if the user places the device in their lap for use), and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as the 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling: This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example access points, routers, wireless ADSL modems, certain laptop configurations, and similar equipment). The final end product must be labeled in a visible area with the following: "Contains TX FCC ID: TK4-WLM54GP23". Manual Information for End Users The end user must not have manual instructions to remove or install the device. The user manual for end users must include the following information in a prominent location. "IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."
Download:
Mirror Download [FCC.gov]
Document ID663755
Application IDGluOiR2JKLosBDaIIYPTlQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize122.48kB (1531055 bits)
Date Submitted2006-06-01 00:00:00
Date Available2006-06-01 00:00:00
Creation Date2005-10-05 11:25:09
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2006-05-31 11:44:52
Document TitleUsers Manual
FCC ID Filing: TK4-WLM54GP23

Navigation menu