Compex Systems WPJ531 WIRELESS ACCESS POINT User Manual

Compex Systems Pte Ltd WIRELESS ACCESS POINT ah

a href="https://usermanual.wiki/Compex-Systems" itemprop="url"> Compex Systems >

User Manual

802.11b/g/n• CompexWRT and OpenWRT firmware supported• Qualcomm-Atheros 650MHz Networking Processor AR9531• Integrated Power-over-Ethernet•Support 2xFE PortDual Band Wireless Embedded BoardModel: WPJ531Applications• Dual Band, Dual Concurrent AP8802.11b/g/n AP• Point to Point• Base Station• CPE• Support Third Party 3G/LTE Module and SIM holder(optional1)FeaturesRevision:1.02 ILDate:2015,03,31•
Technical SpecificationsSystem InformationProcessor Qualcomm-Atheros AR9531System Memory 64MB DDR2NOR Flash 16MBPCIe Slot 9.2mm height miniPCIe slotAntenna Connector 2 x U.F LExtras Serial Port3, JTAG4, Reset Button, Surge Arrestor, Watchdog TimerPower SolutionsLow voltage DC Jack Input: 9 -24V, Passive PoE: 24VHigh voltage IEEE 802.3af module(Optional)5,DC Jack input:36-48V, Passive PoE:48v,compatible with802.3af/802.3at PoE switches andinjectorsROHS Compliance YesHumidity Operating: 5% to 95% (non-condensing)Storage:Max.90%(non-condensing)Temperature Range Operating: -20ºC to 70ºCStorage:-40ºC to 90ºCDimension 117 x 105 x 17 (mm)2.4GOn-board RadioTransmitPowerData Rate 2.4GHz(aggregate)6M 25dBm54M 20dBmHT20 MCS0 24dBmHT20 MCS7 20dBmHT40 MCS0 22dBmHT40 MCS7 20dBmReceiverSensitivityData Rate6Mbps-90dBm54Mbps-75dBmHT20 MCS0 -90dBmHT20 MCS7 -72dBmHT40 MCS0 -88dBmHT40 MCS7 -70dBmMax of concurrentassociationsEncryption ClientLatencyTCP[each client upload and downloadrandomly from 384Kbps to 768Kbps]UDP[each client uploadand download 2Mbps]WPA2-PSK <100msSingle radio Dual radio Single radio Dual radio40 clients 70clients(35 per radio) 20 clients 30clients(15 per radio)1 miniPCIe slot with USB Co-layout,can support SIM holder2 Depends on ordering configuration3 Serial Port is a 4-pin header (TTL) + Serial Converter is available to change the TTL signals on board to RS232 signalsfor debugging.Configurations are subjec to change without notification4 JTAG Port is a 14-pin header + JTAG kit is for writing your own developed loader and firmware directly5 This is a factory option to turn WPJ531LV to WPJ531HV, It is compatible with 802.3af/802.3at PoE switches and injectors
Download:
Mirror Download [FCC.gov]
Document ID2691426
Application IDpPxmzrXNSLRHSMhGJwgxNg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize239.83kB (2997934 bits)
Date Submitted2015-07-24 00:00:00
Date Available2015-07-24 00:00:00
Creation Date2015-07-10 14:02:38
Producing SoftwareFoxit Reader PDF Printer Version 7.1.0.112 邶帇
Document Lastmod2015-07-16 17:42:21
Document Titleah
Document CreatorAdobe Acrobat 8.1 Combine Files
Document Author: ADELINE
FCC ID Filing: TK4WPJ531

Navigation menu