Continental Automotive Systems 5WY7909 Automotive Passive Start and Entry Transmitter User Manual CLAx

User Manual

Re: Certification for SiemensTransmitter

Model/PN(s): 5WY7909

FCC ID: M3N5WY7909

IC: 267F-5WY7909

The device under test is manufactured by the grantee (Siemens) and sold as an OEM

product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc…, the grantee must

ensure the end-user has all applicable / appropriate operating instructions. When end-user

instructions are required, as in the case of this product, the grantee must notify the OEM

to notify the end-user.

Siemens will supply the following information to the reseller/distributor dictating what

must be included in the end user’s manual for the commercial product.

INFORMATION TO BE INCLUDED IN THE END USER'S MANUAL

The following information must be included in the end product user’s manual to

ensure continued FCC and Industry Canada regulatory compliance. The ID

numbers must be included in the manual if the device label is not readily accessible

to the end user. The compliance paragraphs below must be included in the user's

manual.

************************************************************************

FCC ID:M3N5WY7909 IC: 267F-5WY7909

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry

Canada. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesired operation.

WARNING: Changes or modifications not expressively approved by the party

responsible for compliance could void the user's authority to operate the equipment.

The term “IC:” before the radio certification number only signifies that Industry Canada

technical specifications were met.

************************************************************************