Corning Optical Communication MA2000 In-Building RF Distribution Sytem User Manual Technical specification sheet

Corning Optical Communication Wireless In-Building RF Distribution Sytem Technical specification sheet

Contents

Technical specification sheet

DS-2000 Rev 2.7
Features
Support for remote monitoring through MA 410/430
controllers
Scalable and future-safe – additional remote units
can easily be installed
All active components are located in the
communication closet/room
BTS 3
BTS 2
BTS 1
BTS 2
BTS 1
RIU 2
MA 410
RIU 1
MA 430
Base Unit
Base Unit
RU 2000
RU 2000
Add-on
RU 2000
Add-on
RU 2000
Remote Cabinet 1
Remote Cabinet 8
Remote Monitoring
BU Servicing up to
eight remote
locations
Antennas distributing
all services in the
remote locutions
Antennas distributing
all services in the
remote locutions
MobileAccess 2000
MobileAccess 2000
mobileaccess
Networks
Providing converged wireless coverage solutions
MobileAccess™ 2000 converged wireless networks solution provides scalable
in-building coverage for multiple wireless data and voice services through a single
coax and broadband antenna infrastructure. The solution is based on two main
elements that are interconnected via fiber optic cable:
Remote Cabinets - distributed over remote sites, the remote cabinets
interface to the coax antenna infrastructure. Each cabinet can house up to five
Remote Units (RUs) 2000 corresponding to the covered services. MA 2000 Lite
provides single operator entry level support.
Base Units - concentrated in the telecom room, the BUs interface to the RF
signal source, where each BU performs RF to optic conversion for a number
of operator services. Each BU can support up to eight same service RUs.
In addition, Remote Interface Units (RIUs) can be used to provide interface
to the each BTS, and automatically adjust the output signal to respond to
a range of BTS or BDA output power levels.
MA 410/430 controllers can be used for remote monitoring of the system
elements from a single location via advanced intuitive GUI.
Each Remote Cabinet can support up to 20 multi-
operator services
Each MA 2000 Lite can support up to 8 services
All services are distributed through a single coax
and antenna infrastructure
Support for high-power modules
Support for all current and future technologies such
as TDMA, CDMA, WCDMA and GSM, and services
such as PCS/CELLULAR, Paging, iDEN and 802.11
(a/b/g) Wireless LAN
Example of MA 2000 system with
remote cabinets supporting up to five
services: two per RU 2000 and an
additional service provided by the Add-
on unit.
A single coax and antenna infrastructure
services each remote location. Each BU
can distribute the signal over up to eight
remote locations
DS-2000 Rev 2.7
MobileAccess 2000
RF Connections
To RF source
(Base Unit and RIU): N-type Female, 50 ohm
To antennas: N-type Female, 50 ohm
Intermodule: SMA Female, 50 ohm
Physical Specification
Dimensions
- Base Unit 48.26x4.44x29.97cm
(19x1Ux11.8)
- RC (H x W x D) 355x482.6x397mm
(13.97x19x15.63)
- Radio Interface Unit 48.26x13.32x29.97cm
(19x3Ux11.8)
- MA 410/430 48.26x4.44x29.97cm
(19x1Ux11.8)
Weight
- BU 2.82Kg (6.2lb)
- RC 2000 (chassis) 35 Kg four modules (77lbs)
- RIU (3 BTSC) 8.7Kg (19lb)
- MA 410/430 2.6Kg (5.8lb)
Environmental Specifications
Temperature
Operating 0ºC to +50ºC (32ºF to 122ºF)
Storage -20ºC to 85ºC (-4ºC to 185ºC)
Standards and Approvals
USA - FCC-47CFR, parts 2,15, 22, 24,90
Canada - IC
Supported Services
TDMA 800/1900
CDMA 800/1800/1900
GSM 900/1800/1900
iDEN 800, SMR 900, Paging 900
WCDMA
Fiber Optic Specifications
Optical output power 1.0mW
Max. Optical budget 3dB
Optical loss per
mated-pair connectors: 0.5dB (max)
Optical Connector SC/APC
Fiber type 9/125 SM
Wavelength 1310 10nm
Maximum distance between
Base Unit and Remote Cabinet 2Km
Power
Supply to Base Units, Remote Unit 2000,
RIUs and MA 410/430: 20-48VDC
Supply to 1200 add-on: 25-48VDC
Consumption:
- RC chassis 20W
- Base Unit 14W
- Remote Unit 2000 25W
- Add-on MA 1200 50W
- RIU 12W
- MA 410/430 10W
MA 410/430 Remote Management
- Remote SNMP management from a single location
- Client/server management capability over TCP/IP network
with enhanced monitoring and control capabilities
- Intuitive GUI that enables end-to-end fault sourcing from
RIU to antennas
- GUI includes:
- System status at a glance through multi-color tree with
upward propagation of fault indications
- Graphical view of system elements including LED status
displays and auxiliary connections
- Multi-color event monitoring display
464.0 [18.3"]
482.6 [19.0"]
101.6 [4.0"]
76.2 [3.0"]
101.6 [4.0"]
355.0 [14.0"]
431.6 [17.0"]
349.4 [13.8"]
397.0 [15.6"]
355.0 [13.98"] 302.0 [11.89"]
459.6 [18.09"]
487.6 [19.20"]
349.4 [13.76"]
397.0 [15.63"]
460.0 [18.11"]
DS-2000 Rev 2.7
MobileAccess 2000
Wallmount Cabinet
Rackmount Cabinet

Navigation menu