Coulisse ABC22 Device for receiving and sending signals for indoor blinds User Manual

Coulisse B.V. Device for receiving and sending signals for indoor blinds Manual

a href="https://usermanual.wiki/Coulisse" itemprop="url"> Coulisse >

Manual

07.05.2012FCC Manual Regulatory informationThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC ID: ZY4ABC221 FCC Information to UserThis product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certi-fications and approvals.2 FCC Electronic Emission NoticesThis device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:1. This device may not cause harmful interference2. This device must accept any interference received, including interference that may cause unde-sired operation.3 FCC Radio Frequency Interference statementThis equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment is operated in a commercial environment. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.Operation of this equipment in a residential area may cause harmful interference, in which case the userwill be required to correct the interference at his own expense.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected• Consult the dealer or an experienced radio/TV technician for help
Download:
Mirror Download [FCC.gov]
Document ID2175540
Application IDyqM5yJh0pHth/8YmloqS4Q==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize4.79kB (59858 bits)
Date Submitted2014-01-24 00:00:00
Date Available2014-03-01 00:00:00
Creation Date2013-10-03 14:46:15
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2013-10-03 14:46:16
Document TitleManual
Document CreatorAdobe InDesign CS4 (6.0.6)
FCC ID Filing: ZY4ABC22

Navigation menu