D Link IR652B1 Wireless N Gigabit Home Router User Manual Part 1
D Link Corporation Wireless N Gigabit Home Router Part 1
D Link >
Contents
- 1. User Manual Part 1
- 2. User Manual Part 2
User Manual Part 1
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date 1.0 July 19, 2011 Description • Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright © 2011 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. D-Link DIR-652 User Manual Table of Contents Table of Contents Preface.................................................................................................. i Manual Revisions................................................................................................i Trademarks...........................................................................................................i Product Overview............................................................................... 1 Package Contents............................................................................................ 1 System Requirements..................................................................................... 2 Introduction....................................................................................................... 3 Features...................................................................................................... 4 Hardware Overview......................................................................................... 5 Connections.............................................................................................. 5 LEDs............................................................................................................. 6 Installation.......................................................................................... 7 Before you Begin.............................................................................................. 7 Wireless Installation Considerations......................................................... 8 Getting Started................................................................................................. 9 Configuration....................................................................................10 Quick Setup Wizard.......................................................................................10 Web-based Configuration Utility..............................................................16 Setup Wizard...........................................................................................17 Internet Connection.......................................................................17 Wireless Settings..............................................................................17 Manual Configuration.........................................................................21 Dynamic (Cable)...............................................................................22 Internet Setup........................................................................................23 D-Link DIR-652 User Manual PPPoE (DSL).......................................................................................23 PPTP.....................................................................................................24 L2TP......................................................................................................25 Static (assigned by ISP)..................................................................26 DS-Lite.................................................................................................27 Wireless Settings...................................................................................28 Network Settings..................................................................................29 DHCP Server Settings....................................................................30 DHCP Reservation...........................................................................31 IPv6 Internet Connection...................................................................32 IPv6 Internet Connection Setup Wizard........................................33 IPv6 Manual Setup................................................................................38 Auto Detection.................................................................................38 Static IPv6...........................................................................................39 Autoconfiguration..........................................................................40 PPPoE...................................................................................................41 IPv6 in IPv4 Tunneling...................................................................43 6 to 4 Tunneling...............................................................................44 6rd.........................................................................................................45 Link-Local Connectivity.................................................................46 Virtual Server..........................................................................................47 Port Forwarding.....................................................................................49 Application Rules..................................................................................50 QoS Engine..............................................................................................51 Network Filters.......................................................................................53 Access Control........................................................................................54 ii Table of Contents Access Control Wizard...................................................................54 Website Filters........................................................................................57 Inbound Filters.......................................................................................58 Firewall Settings....................................................................................59 Application Level Gateway Configuration...................................60 Routing.....................................................................................................61 Advanced Wireless Settings..............................................................62 Wi-Fi Protected Setup (WPS).............................................................63 Advanced Network Settings.............................................................64 UPnP.....................................................................................................64 Internet Ping Block.........................................................................64 Internet Port Speed........................................................................64 Multicast Streams............................................................................64 Guest Zone..............................................................................................65 IPv6 Firewall............................................................................................66 IPv6 Routing............................................................................................67 Administrator Settings........................................................................68 Time Settings..........................................................................................69 SysLog.......................................................................................................70 Email Settings.........................................................................................71 System Settings.....................................................................................72 Update Firmware...................................................................................73 DDNS.........................................................................................................74 System Check.........................................................................................75 Schedules.................................................................................................76 Device Information...............................................................................77 Log..............................................................................................................78 Stats...........................................................................................................79 Active Sessions.......................................................................................79 D-Link DIR-652 User Manual Wireless.....................................................................................................80 IPv6.............................................................................................................81 IPv6 Routing............................................................................................81 Support.....................................................................................................82 Wireless Security..............................................................................83 What is WPA?....................................................................................................83 Wireless Security Setup Wizard.................................................................84 Configure WPA-Personal (PSK)..................................................................86 Configure WPA-Enterprise (RADIUS).......................................................87 Using Windows® 7 and WPS for Wireless Configuration...................89 Connect to a Wireless Network........................................................93 Using Windows® 7..........................................................................................93 Using Windows Vista®...................................................................................96 Configure Wireless Security...............................................................97 Using Windows® XP.......................................................................................99 Configure WPA-PSK........................................................................... 100 Troubleshooting.............................................................................102 Wireless Basics................................................................................106 Tips................................................................................................................... 108 Wireless Modes............................................................................................ 109 Networking Basics..........................................................................110 Check your IP address................................................................................ 110 Technical Specifications.................................................................112 iii Section 1 - Product Overview Product PackageOverview Contents DIR-652 Wireless N Gigabit Home Router Ethernet Cable Power Adapter CD-ROM with Manual and Setup Wizard If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-652 will cause damage and void the warranty. D-Link DIR-652 User Manual Section 1 - Product Overview System Requirements Network Requirements • An Ethernet-based Cable or DSL modem • IEEE 802.11n or 802.11g wireless clients • 10/100/1000 Ethernet Computer with the following: • Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapter Web-based Configuration Utility Requirements Browser Requirements: • Internet Explorer 6.0 or higher • Chrome 2.0 or higher • Firefox 3.0 or higher • Safari 3.0 or higher (with Java 1.3.1 or higher) Windows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. CD Installation Wizard Requirements D-Link DIR-652 User Manual Computer with the following: • Windows® 7, Vista®, or XP with Service Pack 2 • An installed Ethernet adapter • CD-ROM drive Section 1 - Product Overview Introduction TOTAL PERFORMANCE Combines award winning router features and 802.11n wireless technology to provide the best wireless performance. TOTAL SECURITY The most complete set of security features including Active Firewall and WPA2™ to protect your network against outside intruders. TOTAL COVERAGE Provides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage. ULTIMATE PERFORMANCE The D-Link Wireless N Gigabit Home Router (DIR-652) is a 802.11n compliant device that delivers real world performance of up to 650% faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure wireless network to share photos, files, music, video, printers, and network storage throughout your home. Connect the Wireless N Gigabit Home Router to a cable or DSL modem and share your high-speed Internet access with everyone on the network. In addition, this Router includes a Quality of Service (QoS) engine that keeps digital phone calls (VoIP) and online gaming smooth and responsive, providing a better Internet experience. EXTENDED WHOLE HOME COVERAGE This high performance router provides superior Whole Home Coverage while reducing dead spots. The Wireless N Gigabit Home Router is designed for use in bigger homes and for users who demand higher performance networking. Add a notebook or desktop adapter and stay connected to your network from virtually anywhere in your home. TOTAL NETWORK SECURITY The Wireless N Gigabit Home Router supports all of the latest wireless security features to prevent unauthorized access, be it from over the wireless network or from the Internet. Support for WPA standards ensure that you’ll be able to use the best possible encryption method, regardless of your client devices. In addition, this Wireless N Gigabit Home Router utilizes dual active firewalls (SPI and NAT) to prevent potential attacks from across the Internet. * Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-652 User Manual Section 1 - Product Overview Features • Faster Wireless Networking - The DIR-652 provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. The performance of this 802.11n wireless router gives you the freedom of wireless networking at speeds 650% faster than 802.11g. • Compatible with 802.11g Devices - The DIR-652 is still fully compatible with the IEEE 802.11g standard, so it can connect with existing 802.11g PCI, USB and Cardbus adapters. • Advanced Firewall Features - The Web-based user interface displays a number of advanced network management features including: • Content Filtering - Easily applied content filtering based on MAC Address, URL, and/or Domain Name. • Filter Scheduling - These filters can be scheduled to be active on certain days or for a duration of hours or minutes. • Secure Multiple/Concurrent Sessions - The DIR-652 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-652 can securely access corporate networks. • User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DIR-652 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Configure your router to your specific settings within minutes. * Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-652 User Manual Section 1 - Product Overview Hardware Overview Connections LAN Ports (1-4) Internet Port Power Receptor Reset D-Link DIR-652 User Manual Connect Ethernet devices such as computers, switches, and hubs. The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem. Receptor for the supplied power adapter. Press and hold the reset button to restore the router to its original factory settings. Section 1 - Product Overview LEDs Power LED Internet LED A solid light indicates connection on the Internet port. This LED blinks during data transmission. A solid blue light indicates that there is an Internet connection, an orange light indicates that there is none. WLAN LED A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission. A solid light indicates a proper connection to the power supply. Local Network’s A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED LED blinks during data transmission. D-Link DIR-652 User Manual Section 2 - Installation Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Before you Begin Please configure the router with the computer that was last connected directly to your modem. Also, you can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-652 User Manual Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DIR-652 User Manual Section 2 - Installation Getting Started The DIR-652 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the Wizard CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows® XP. The steps and screens are similar for the other Windows operating systems. If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\DWizard.exe” (where D: represents the drive letter of your CD-ROM drive). When the autorun screen appears, click START. Note: It is recommended to write down the SSID and Security Key, followed by the login password on the provided CD holder. D-Link DIR-652 User Manual Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. Note: If you have successfully completed the setup on your router with the CD, the Quick Setup Wizard will not appear. Please refer to page 16. Quick Setup Wizard To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1). D-Link DIR-652 User Manual 10 Section 3 - Configuration This wizard is designed to guide you through a step-by step process to configure your new D-Link router and connect to the Internet. Click Next to continue. In order to secure your new networking device, please enter a password and click Next. D-Link DIR-652 User Manual 11 Section 3 - Configuration Select Enable Advanced DNS Services to allow this function to improve your overall Internet experience. Click Next to continue. Please wait while your router detects your internet connection type. D-Link DIR-652 User Manual 12 Section 3 - Configuration Select your Internet connection type and click Next to continue. If you selected DHCP Connection, make suer that you are connected to the D-Link router with the PC that was originally connected to your broadband connection. Then, click the Clone MAC button to copy your computer’s MAC address. Click Next to continue. D-Link DIR-652 User Manual 13 Section 3 - Configuration Please give your network a name using up to 32 characters. It is highly recommended the you have a security key for your network. If you would like the router to automatically assign a security key, choose Automatically assign a network key or you may choose Manually assign a network key and you may enter your own Network key. Click Next to continue. Once this screen appears, your setup is complete. Click Save & Connect to reboot the router. D-Link DIR-652 User Manual 14 Section 3 - Configuration Before your router reboots, you will be asked if you want to bookmark ‘D-Link Router Web Management,” click Ok to finish. D-Link DIR-652 User Manual 15 Section 3 - Configuration Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1). You may also connect using the NetBIOS name in the address bar (http://dlinkrouter). Select Admin from the drop-down menu and then enter your password. The password is left blank by default. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. D-Link DIR-652 User Manual 16 Section 3 - Configuration Setup Wizard Internet Connection Click Internet Connection Setup Wizard to quickly configure your router. Skip to the next page. If you want to enter your settings without running the wizard, click Manual Configuration and skip to page 21. Wireless Settings Click Wireless Connection Setup Wizard to begin. If you want to add your wireless clients to your router using WPS, click Add Wireless Device with WPS and skip to page 84. If you want to configure your wireless settings manually, click Manual Wireless Connection Setup and skip to page 28. D-Link DIR-652 User Manual 17 Section 3 - Configuration Click Next to continue. Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. Select the type of Internet connection you use and then click Next to continue. D-Link DIR-652 User Manual 18 Section 3 - Configuration If you selected Dynamic, you may need to enter the MAC address of the computer that was last connected directly to your modem. If you are currently using that computer, click Clone Your PC’s MAC Address and then click Next to continue. The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. If you selected PPPoE, enter your PPPoE username and password. Click Next to continue. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If you selected PPTP, enter your PPTP username and password. Click Next to continue. D-Link DIR-652 User Manual 19 Section 3 - Configuration If you selected L2TP, enter your L2TP username and password. Click Next to continue. If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue. Click Connect to save your settings. Once the router is finished rebooting, click Continue. Please allow 1-2 minutes to connect. Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet. D-Link DIR-652 User Manual 20 Section 3 - Configuration Manual Configuration My Internet Select the type of Internet connection you have. Select Dynamic IP (DHCP), PPPoE, Connection is: PPTP, L2TP, Static, or DS-Lite. Refer to the next few pages for more information. Enable Advanced Advanced Domain Name System (DNS) services enhances your Internet performance by DNS Service: getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features. Enable True When this option is enabled, the router will speed up NAT performance by hardware Gigabit Routing acceleration mechanism. Connectivity: Note: SPI and the QoS engine will be disabled automatically when hardware NAT is enabled. D-Link DIR-652 User Manual 21 Section 3 - Configuration Dynamic (Cable) My Internet Select Dynamic IP (DHCP) to obtain IP Address information automatically from your Connection: ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services such as Comcast and Cox. Host Name: The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure. Use Unicasting: Check the box if you are having problems obtaining an IP address from your ISP. Primary/Secondary Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These DNS Server: addresses are usually obtained automatically from your ISP. Leave at 0.0.0.0 if you did not specifically receive these from your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-652 User Manual 22 Section 3 - Configuration Internet Setup PPPoE (DSL) Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. My Internet Select PPPoE (Username/Password) from the drop-down menu. Connection: Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. IP Address: Enter the IP address (Static PPPoE only). User Name: Enter your PPPoE user name. Password: Enter your PPPoE password and then retype the password in the next box. Service Name: Enter the ISP Service Name (optional). Reconnection Mode: Select either Always-on, On-Demand, or Manual. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. DNS Addresses: Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only). MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-652 User Manual 23 Section 3 - Configuration PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. PPTP IP Address: Enter the IP address (Static PPTP only). PPTP Subnet Mask: Enter the Primary and Secondary DNS Server Addresses (Static PPTP only). PPTP Gateway: Enter the Gateway IP Address provided by your ISP. PPTP Server IP: Enter the Server IP provided by your ISP (optional). Username: Enter your PPTP username. Password: Enter your PPTP password and then retype the password in the next box. Reconnect Mode: Select either Always-on, On-Demand, or Manual. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.) MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-652 User Manual 24 Section 3 - Configuration L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. L2TP IP Enter the L2TP IP address supplied by your ISP (Static only). Address: L2TP Subnet Enter the Subnet Mask supplied by your ISP (Static only). Mask: L2TP Gateway: Enter the Gateway IP Address provided by your ISP. L2TP Server IP: Enter the Server IP provided by your ISP (optional). Username: Enter your L2TP username. Password: Enter your L2TP password and then retype the password in the next box. Reconnect Select either Always-on, On-Demand, or Manual. Mode: Maximum Idle Enter a maximum idle time during which the Internet connection is maintained during inactivity. Time: To disable this feature, enable Auto-reconnect. DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only). MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. Clone MAC The default MAC Address is set to the Internet port’s physical interface MAC address on the Address: Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-652 User Manual 25 Section 3 - Configuration Static (assigned by ISP) Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format. IP Address: Enter the IP address assigned by your ISP. Subnet Mask: Enter the Subnet Mask assigned by your ISP. Default Gateway: Enter the Gateway assigned by your ISP. DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.) MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. MAC Address: The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-652 User Manual 26 Section 3 - Configuration DS-Lite Another Internet Connection type is DS-Lite. DS-Lite Select the DS-Lite DHCPv6 Option to let the router allocate the AFTR IPv6 Configuration: address automatically. Select the Manual Configuration to enter the AFTR IPv6 address in manually. AFTR IPv6 After selecting the Manual Configuration option above, the user can enter Address: the AFTR IPv6 address used here. B4 IPv4 Enter the B4 IPv4 address value used here. Address: WAN IPv6 Once connected, the WAN IPv6 address will be displayed here. Address: IPv6 WAN Once connected, the IPv6 WAN Default Gateway address will be displayed Default here. Gateway: Click on the Save Settings button to accept the changes made. Click on the Don’t Save Settings button to discard the changes made. D-Link DIR-652 User Manual 27 Section 3 - Configuration Wireless Settings Enable Wireless: Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Schedule: The schedule of time when the wireless settings rules will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Wireless Network Service Set Identifier (SSID) is the name of your wireless network. Create a name Name: using up to 32 characters. The SSID is case-sensitive. Enable Auto Channel The Auto Channel Scan setting can be selected to allow the DIR-652 to choose the Scan: channel with the least amount of interference. Wireless Channel: Indicates the channel setting for the DIR-652. By default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be greyed out. 802.11 Mode: Select one of the following: 802.11g Only - Select if all of your wireless clients are 802.11g. 802.11n Only - Select only if all of your wireless clients are 802.11n. Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n and 11g wireless clients. Channel Width: Select the Channel Width: Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients. 40MHz - Select if using only 802.11n wireless clients. Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance. Visibility Status: Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-652. If Invisible is selected, the SSID of the DIR-652 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-652 D-Link DIR-652 User Manual 28 Section 3 - Configuration Network Settings This section will allow you to change the local network settings of the router and to configure the DHCP settings. IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the Subnet Mask. The default subnet mask is 255.255.255.0. Local Domain: Enter the Domain name (Optional). Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-652 User Manual 29 Section 3 - Configuration DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The DIR-652 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-652. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. Enable DHCP Check this box to enable the DHCP server on your router. Uncheck Server: to disable this function. DHCP IP Address Enter the starting and ending IP addresses for the DHCP server’s Range: IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Time: The length of time for the IP address lease. Enter the Lease time in minutes. Always Broadcast: Enable this feature to broadcast your networks DHCP server to LAN/WLAN clients. NetBIOS NetBIOS allows LAN hosts to discover all other computers within Announcement: the network, enable this feature to allow the DHCP Server to offer NetBIOS configuration settings. Learn NetBIOS Enable this feature to allow WINS information to be learned from from WAN: the WAN side, disable to allow manual configuration. NetBIOS Scope: This feature allows the configuration of a NetBIOS ‘domain’ name under which network hosts operates. This setting has no effect if the ‘Learn NetBIOS information from WAN’ is activated.” NetBIOS Mode Select the different type of NetBIOS node: Broadcast only, Point-to-Point, Mixed-mode, and Hybrid. Type: Primary/Secondary Enter your Primary (and Secondary) WINS IP address(es). WINS IP Address: D-Link DIR-652 User Manual 30 Section 3 - Configuration DHCP Reservation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range. Enable: Check this box to enable the reservation. Computer Name: Enter the computer name or select from the drop-down menu and click <<. IP Address: Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range. MAC Address: Enter the MAC address of the computer or device. Copy Your PC’s If you want to assign an IP address to the computer you are MAC Address: currently on, click this button to populate the fields. Save: Click Save to save your entry. You must click Save Settings at the top to activate your reservations. Number of In this section you can see what LAN devices are currently leasing Dynamic DHCP IP addresses. Clients: Revoke: Click Revoke to cancel the lease for a specific LAN device and free an entry in the lease table. Do this only if the device no longer needs the leased IP address, because, for example, it has been removed from the network. Note: The Revoke option will not disconnect a PC with a current network session from the network; you would need to use MAC Address Filter to do that. Revoke will only free up a DHCP Address for the very next requester. If the previous owner is still available, those two devices may both receive an IP Address Conflict error, or the second device may still not receive an IP Address; in that case, you may still need to extend the “DHCP IP Address Range” to address the issue, it is located in the DHCP Server section. Reserve: The Reserve option converts this dynamic IP allocation into a DHCP Reservation and adds the corresponding entry to the DHCP Reservations List. D-Link DIR-652 User Manual 31 Section 3 - Configuration IPv6 Internet Connection Click IPv6 Internet Connection Setup Wizard to begin. If you want to configure your IPv6 Internet Connection manually, click Manual IPv6 Internet Connection Setup and skip to page 39. D-Link DIR-652 User Manual 32 Section 3 - Software Configuration IPv6 Internet Connection Setup Wizard On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You can use the Webbased IPv6 Internet Connection Setup Wizard, or you can manually configure the connection. IPv6 Internet Connection Setup Wizard For the beginner user that have not configured a router before, click on the IPv6 Internet Connection Setup Wizard button and the router will guide you through a few simple steps to get your network up and running. After clicking on the IPv6 Internet Connection Setup Wizard button, this page will appear. Welcome to the D-Link IPv6 Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the IPv6 Internet. Click Next to continue to the next page. Click Cancel to discard the changes made and return to the main page. Step 1: Configure Your IPv6 Internet Connection The router will try and detect whether its possible to obtain the IPv6 Internet Connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found. D-Link DIR-652 User Manual 33 Section 3 - Software Configuration However, if the automatic detection fails, the user will be prompt to either Try again or to click on the Guide me through the IPv6 settings button to initiate the manual continual of the wizard. D-Link DIR-652 User Manual 34 Section 3 - Software Configuration Step 1: Configure Your IPv6 Internet Connection There are several connection types to choose from. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. The 3 options available on this page is IPv6 over PPPoE, Static IPv6 address and Route, and Tunneling Connection. Choose the required IPv6 Internet Connection type and click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. Set Username and Password Connection (PPPoE) After selecting the IPv6 over PPPoE option, the user will be able to configure the IPv6 Internet connection that requires a username and password to get online. Most DSL modems use this type of connection. The following parameters will be available for configuration: PPPoE Session: Select the PPPoE Session value used here. This option will state that this connection shares it’s information with the already configured IPv6 PPPoE connection, or the user can create a new PPPoE connection here. User Name: Enter the PPPoE username used here. This information is obtainable from the ISP. Password: Enter the PPPoE password used here. This information is obtainable from the ISP. Verify Password: Re-enter the PPPoE password used here. Service Name: Enter the service name for this connection here. This option is optional. Click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-652 User Manual 35 Section 3 - Software Configuration Set Static IPv6 Address Connection This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides you with all this information. Use Link-Local The Link-local address is used by nodes and routers when communicatAddress: ing with neighboring nodes on the same link. This mode enables IPv6capable devices to communicate with each other on the LAN side. IPv6 Address: Enter the WAN IPv6 address for the router here. Subnet Prefix Enter the WAN subnet prefix length value used here. Length: Default Gateway: Enter the WAN default gateway IPv6 address used here. Primary IPv6 DNS Enter the WAN primary DNS Server address used here. Address: Secondary IPv6 DNS Enter the WAN secondary DNS Server address used here. Address: LAN IPv6 Address: These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router’s LAN IPv6 Address configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) Click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-652 User Manual 36 Section 3 - Software Configuration Tunneling Connection (6rd) After selecting the Tunneling Connection (6rd) option, the user can configure the IPv6 6rd connection settings. The following parameters will be available for configuration: 6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used here. IPv4 Address: Enter the IPv4 address used here. Mask Length: Enter the IPv4 mask length used here. Assigned IPv6 Displays the IPv6 assigned prefix value here. Prefix: 6rd Border Relay Enter the 6rd border relay IPv4 address used here. IPv4 Address: IPv6 DNS Server: Enter the primary DNS Server address used here. Click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. Setup Complete The IPv6 Internet Connection Setup Wizard was completed. Click on the Connect button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. D-Link DIR-652 User Manual 37 Section 3 - Configuration IPv6 Manual Setup There are several connection types to choose from: Auto Detection, Static IPv6, Autoconfiguration (SLAAC/DHCPv6), PPPoE, IPv6 in IPv4 Tunnel, 6to4, 6rd, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. Auto Detection Select Auto Detection to have the router detect and automatically configure your IPv6 setting from your ISP. D-Link DIR-652 User Manual 38 Section 3 - Configuration Static IPv6 My IPv6 Connection: Select Static IPv6 from the drop-down menu. WAN IPv6 Address Settings: Enter the address settings supplied by your Internet provider (ISP). LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. IPv6 Address Range Start: Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-652 User Manual 39 Section 3 - Configuration Autoconfiguration My IPv6 Connection: Select Autoconfiguration (Stateless/DHCPv6) from the drop-down menu. IPv6 DNS Settings: Select either Obtain DNS server address automatically or Use the following DNS Address. Primary/Secondary DNS Enter the primary and secondary DNS server addresses. Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. IPv6 Address Range Start: Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-652 User Manual 40 Section 3 - Configuration PPPoE My IPv6 Connection: Select PPPoE from the drop-down menu. PPPoE: Enter the PPPoE account settings supplied by your Internet provider (ISP). Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. IP Address: Enter the IP address (Static PPPoE only). User Name: Enter your PPPoE user name. Password: Enter your PPPoE password and then retype the password in the next box. Service Name: Enter the ISP Service Name (optional). Reconnection Mode: Select either Always-on, On-Demand, or Manual. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. IPv6 DNS Settings: Select either Obtain DNS server address automatically or Use the following DNS Address. Primary/Secondary DNS Enter the primary and secondary DNS server addresses. Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. D-Link DIR-652 User Manual 41 Section 3 - Configuration Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. IPv6 Address Range Start: Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-652 User Manual 42 Section 3 - Configuration IPv6 in IPv4 Tunneling My IPv6 Connection: Select IPv6 in IPv4 Tunnel from the drop-down menu. IPv6 in IPv4 Tunnel Enter the settings supplied by your Internet provider (ISP). Settings: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Displays the Router’s LAN Link-Local Address. Address: Enable Check to enable the Autoconfiguration feature. Autoconfiguration: Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. Type: IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local computers. Start: IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local computers. End: Pv6 Address Lifetime: Enter the Router Advertisement Lifetime (in minutes). D-Link DIR-652 User Manual 43 Section 3 - Configuration 6 to 4 Tunneling My IPv6 Connection: Select 6 to 4 from the drop-down menu. 6 to 4 Settings: Enter the IPv6 settings supplied by your Internet provider (ISP). Primary/Secondary DNS Enter the primary and secondary DNS server addresses. Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Check to enable the Autoconfiguration feature. Autoconfiguration: Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your local computers. Start: IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your local computers. End: IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-652 User Manual 44 Section 3 - Configuration 6rd My IPv6 Connection: Select 6rd from the drop-down menu. 6RD Settings: Enter the address settings supplied by your Internet provider (ISP). LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless DHCPv6. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: D-Link DIR-652 User Manual 45 Section 3 - Configuration Link-Local Connectivity My IPv6 Connection: Select Link-Local Only from the drop-down menu. LAN IPv6 Address Displays the IPv6 address of the router. Settings: D-Link DIR-652 User Manual 46 Section 3 - Configuration Virtual Server The DIR-652 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DIR-652 firewall feature filters out unrecognized packets to protect your LAN network so all computers networked with the DIR-652 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the DIR-652 redirects the external service request to the appropriate server within the LAN network. The DIR-652 is also capable of port-redirection meaning incoming traffic to a particular port may be redirected to a different port on the server computer. Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are pre-defined virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service. For a list of ports for common applications, please visit http://support.dlink.com/faq/view.asp?prod_id=1191. D-Link DIR-652 User Manual 47 Section 3 - Configuration This will allow you to open a single port. If you would like to open a range of ports, refer to the next page. Name: Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields. IP Address: Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the “Computer Name” drop-down menu. Select your computer and click <<. Private Port/ Enter the port that you want to open next to Private Port and Public Port: Public Port. The private and public ports are usually the same. The public port is the port seen from the Internet side, and the private port is the port being used by the application on the computer within your local network. Protocol Type: Select TCP, UDP, or Both from the drop-down menu. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. Schedule: The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-652 User Manual 48 Section 3 - Configuration Port Forwarding This will allow you to open a single port or a range of ports. Name: Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields. IP Address: Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the “Computer Name” drop-down menu. Select your computer and click <<. TCP/UDP: Enter the TCP and/or UDP port or ports that you want to open. You can enter a single port or a range of ports. Separate ports with a common. Example: 24,1009,3000-4000 Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. Schedule: The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-652 User Manual 49 Section 3 - Configuration Application Rules Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-652. If you need to run applications that require multiple connections, specify the port normally associated with an application in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic. The DIR-652 provides some predefined applications in the table on the bottom of the web page. Select the application you want to use and enable it. Name: Enter a name for the rule. You may select a pre-defined application from the drop-down menu and click <<. Trigger: This is the port used to trigger the application. It can be either a single port or a range of ports. Traffic Type: Select the protocol of the trigger port (TCP, UDP, or Both). Firewall: This is the port number on the Internet side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Traffic Type: Select the protocol of the firewall port (TCP, UDP, or Both). Schedule: The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-652 User Manual 50 Section 3 - Configuration QoS Engine The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are disabled and application priority is not classified automatically. Enable Traffic This option is disabled by default. Enable this option for Shaping: better performance and experience with online games and other interactive applications, such as VoIP. Automatic Uplink This option is enabled by default when the QoS Engine Speed: option is enabled. This option will allow your router to automatically determine the uplink speed of your Internet connection. Measured Uplink This displays the detected uplink speed. Speed: Manual Uplink The speed at which data can be transferred from the router Speed: to your ISP. This is determined by your ISP. Enabled QoS Engine: This option is enabled by default. This will allow your router to automatically determine the network priority of running programs. Automatic This option is enabled by default so that your router will Classification: automatically determine which programs should have network priority. For best performance, use the Automatic Classification option to automatically set the priority for your applications. Dynamic This option should be enabled when you have a slow Fragmentation: Internet uplink. It helps to reduce the impact that large low priority network packets can have on more urgent ones. D-Link DIR-652 User Manual 51 Section 3 - Configuration QoS Engine Rules: A QoS Engine Rule identifies a specific message flow and assigns a priority to that flow. For most applications, automatic classification will be adequate, and specific QoS Engine Rules will not be required. The QoS Engine supports overlaps between rules, where more than one rule can match for a specific message flow. If more than one rule is found to match the rule with the highest priority will be used. Name: Create a name for the rule that is meaningful to you. Priority: The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent). Protocol: The protocol used by the messages. Local IP Range: The rule applies to a flow of messages whose LAN-side IP address falls within the range set here. Local Port Range: The rule applies to a flow of messages whose LAN-side port number is within the range set here. Remote IP Range: The rule applies to a flow of messages whose WAN-side IP address falls within the range set here. Remote Port Range: The rule applies to a flow of messages whose WAN-side port number is within the range set here. D-Link DIR-652 User Manual 52 Section 3 - Configuration Network Filters Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Configure MAC Select Turn MAC Filtering Off, Turn MAC Filtering ON Filtering: and ALLOW computers listed to access the network, or Turn MAC Filtering ON and DENY computers listed to access the network from the drop-down menu. MAC Address: Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click << to copy that MAC Address. Clear: Click to remove the MAC address. D-Link DIR-652 User Manual 53 Section 3 - Configuration Access Control The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games. Add Policy: Click the Add Policy button to start the Access Control Wizard. Access Control Wizard Click Next to continue with the wizard. D-Link DIR-652 User Manual 54 Section 3 - Configuration Enter a name for the policy and then click Next to continue. Select a schedule (I.E. Always) from the drop-down menu and then click Next to continue. Enter the following information and then click Next to continue. • Address Type - Select IP address, MAC address, or Other Machines. • IP Address - Enter the IP address of the computer you want to apply the rule to. D-Link DIR-652 User Manual 55 Section 3 - Configuration Select the filtering method and then click Next to continue. If you selected Apply Advanced Port Filters, then enter the rule: Enable - Check to enable the rule. Name - Enter a name for your rule. Dest IP Start - Enter the starting IP address. Dest IP End - Enter the ending IP address. Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. D-Link DIR-652 User Manual 56
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-701 Create Date : 2011:10:14 18:17:49+08:00 Metadata Date : 2011:10:24 16:18:43+08:00 Modify Date : 2011:10:24 16:18:43+08:00 Creator Tool : Adobe InDesign CS4 (6.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 6727 bytes, use -b option to extract) Instance ID : uuid:46310c4f-9b40-46fb-b2ec-25335701e058 Document ID : xmp.did:73CB2E7FD3D2E011AA18D2BFBA0B3901 Original Document ID : adobe:docid:indd:a1848c20-53b9-11df-a7ce-c3d93d88aafb Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:72CB2E7FD3D2E011AA18D2BFBA0B3901 Derived From Document ID : xmp.did:70CB2E7FD3D2E011AA18D2BFBA0B3901 Derived From Original Document ID: adobe:docid:indd:a1848c20-53b9-11df-a7ce-c3d93d88aafb Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:EF4807E9F356DF118A62DFD1A4A0A4AF, xmp.iid:F04807E9F356DF118A62DFD1A4A0A4AF, xmp.iid:F14807E9F356DF118A62DFD1A4A0A4AF, xmp.iid:F24807E9F356DF118A62DFD1A4A0A4AF, xmp.iid:F34807E9F356DF118A62DFD1A4A0A4AF, xmp.iid:F44807E9F356DF118A62DFD1A4A0A4AF, xmp.iid:F54807E9F356DF118A62DFD1A4A0A4AF, xmp.iid:F64807E9F356DF118A62DFD1A4A0A4AF, xmp.iid:F74807E9F356DF118A62DFD1A4A0A4AF, xmp.iid:2A49627EAB5FDF11B3DACA4921B10069, xmp.iid:2B49627EAB5FDF11B3DACA4921B10069, xmp.iid:2C49627EAB5FDF11B3DACA4921B10069, xmp.iid:2D49627EAB5FDF11B3DACA4921B10069, xmp.iid:2C486FB8A462DF11B4D4C4C29BC9D5B0, xmp.iid:462CFE59F273DF11B74A862F0F1FFF2A, xmp.iid:472CFE59F273DF11B74A862F0F1FFF2A, xmp.iid:CF668194B974DF11AE93FC0BEE80555E, xmp.iid:D0668194B974DF11AE93FC0BEE80555E, xmp.iid:D1668194B974DF11AE93FC0BEE80555E, xmp.iid:D2668194B974DF11AE93FC0BEE80555E, xmp.iid:51C9BDCDCCA0DF11BC70DA126580E928, xmp.iid:05881269A7F1DF118902DFC25E9539E3, xmp.iid:06881269A7F1DF118902DFC25E9539E3, xmp.iid:07881269A7F1DF118902DFC25E9539E3, xmp.iid:08881269A7F1DF118902DFC25E9539E3, xmp.iid:09881269A7F1DF118902DFC25E9539E3, xmp.iid:0A881269A7F1DF118902DFC25E9539E3, xmp.iid:0B881269A7F1DF118902DFC25E9539E3, xmp.iid:0C881269A7F1DF118902DFC25E9539E3, xmp.iid:0D881269A7F1DF118902DFC25E9539E3, xmp.iid:0E881269A7F1DF118902DFC25E9539E3, xmp.iid:3E628BCFA9F1DF118902DFC25E9539E3, xmp.iid:3F628BCFA9F1DF118902DFC25E9539E3, xmp.iid:40628BCFA9F1DF118902DFC25E9539E3, xmp.iid:41628BCFA9F1DF118902DFC25E9539E3, xmp.iid:42628BCFA9F1DF118902DFC25E9539E3, xmp.iid:43628BCFA9F1DF118902DFC25E9539E3, xmp.iid:44628BCFA9F1DF118902DFC25E9539E3, xmp.iid:45628BCFA9F1DF118902DFC25E9539E3, xmp.iid:46628BCFA9F1DF118902DFC25E9539E3, xmp.iid:47628BCFA9F1DF118902DFC25E9539E3, xmp.iid:48628BCFA9F1DF118902DFC25E9539E3, xmp.iid:F6ADA3AA400AE011B7AA9DD4CD4C8B65, xmp.iid:11BE4B4C9D0CE011AF22FA32C2E9117F, xmp.iid:12BE4B4C9D0CE011AF22FA32C2E9117F, xmp.iid:13BE4B4C9D0CE011AF22FA32C2E9117F, xmp.iid:14BE4B4C9D0CE011AF22FA32C2E9117F, xmp.iid:52ECD5D9330DE011859EB1C48191973C, xmp.iid:E5DD8FF9F10EE011935697910FD93236, xmp.iid:EB51B6F66414E011A051AFCB4EEFDDBE, xmp.iid:EC51B6F66414E011A051AFCB4EEFDDBE, xmp.iid:D2776FCA6A18E0119E94972E3B73C5AF, xmp.iid:FFFAAE1A6E23E011BB1AC9C7AE845C88, xmp.iid:0B9FBDA7FE23E011B37FBE2D7902AA02, xmp.iid:777C94E61B24E011B37FBE2D7902AA02, xmp.iid:787C94E61B24E011B37FBE2D7902AA02, xmp.iid:797C94E61B24E011B37FBE2D7902AA02, xmp.iid:7A7C94E61B24E011B37FBE2D7902AA02, xmp.iid:7B7C94E61B24E011B37FBE2D7902AA02, xmp.iid:7E7C94E61B24E011B37FBE2D7902AA02, xmp.iid:CD8011430328E0118962B4525480A7B6, xmp.iid:7B9DE25B0A28E0118CD79DF303A54EBE, xmp.iid:3EF78722E628E011BCCBCA6E88DA41EE, xmp.iid:9C2E76637F29E011A518C4E831E3285D, xmp.iid:E572C8197B2AE011BA0DBE8589ACD5D4, xmp.iid:A80555E9A82DE0118047D2B8CD7EA1CC, xmp.iid:3DADC03D092FE011AFF9C39F3F408AD8, xmp.iid:40ADC03D092FE011AFF9C39F3F408AD8, xmp.iid:4501D6F4DD2FE011B1E8C55CDD83133A, xmp.iid:4601D6F4DD2FE011B1E8C55CDD83133A, xmp.iid:9038B8DC4035E011AEE8EA63DBBCB3ED, xmp.iid:9632B15C3935E011BD7BB4829868FB43, xmp.iid:9732B15C3935E011BD7BB4829868FB43, xmp.iid:9832B15C3935E011BD7BB4829868FB43, xmp.iid:9932B15C3935E011BD7BB4829868FB43, xmp.iid:9A32B15C3935E011BD7BB4829868FB43, xmp.iid:9B32B15C3935E011BD7BB4829868FB43, xmp.iid:095B97BF4735E011BD7BB4829868FB43, xmp.iid:0A5B97BF4735E011BD7BB4829868FB43, xmp.iid:0B5B97BF4735E011BD7BB4829868FB43, xmp.iid:0C5B97BF4735E011BD7BB4829868FB43, xmp.iid:0D5B97BF4735E011BD7BB4829868FB43, xmp.iid:0E5B97BF4735E011BD7BB4829868FB43, xmp.iid:0F5B97BF4735E011BD7BB4829868FB43, xmp.iid:105B97BF4735E011BD7BB4829868FB43, xmp.iid:115B97BF4735E011BD7BB4829868FB43, xmp.iid:125B97BF4735E011BD7BB4829868FB43, xmp.iid:135B97BF4735E011BD7BB4829868FB43, xmp.iid:9FB238FF5B35E011BD7BB4829868FB43, xmp.iid:A0B238FF5B35E011BD7BB4829868FB43, xmp.iid:A1B238FF5B35E011BD7BB4829868FB43, xmp.iid:A2B238FF5B35E011BD7BB4829868FB43, xmp.iid:A3B238FF5B35E011BD7BB4829868FB43, xmp.iid:A4B238FF5B35E011BD7BB4829868FB43, xmp.iid:A5B238FF5B35E011BD7BB4829868FB43, xmp.iid:A6B238FF5B35E011BD7BB4829868FB43, xmp.iid:A7B238FF5B35E011BD7BB4829868FB43, xmp.iid:153904DC6A35E011BD7BB4829868FB43, xmp.iid:163904DC6A35E011BD7BB4829868FB43, xmp.iid:173904DC6A35E011BD7BB4829868FB43, xmp.iid:183904DC6A35E011BD7BB4829868FB43, xmp.iid:193904DC6A35E011BD7BB4829868FB43, xmp.iid:1A3904DC6A35E011BD7BB4829868FB43, xmp.iid:1B3904DC6A35E011BD7BB4829868FB43, xmp.iid:1C3904DC6A35E011BD7BB4829868FB43, xmp.iid:1D3904DC6A35E011BD7BB4829868FB43, xmp.iid:1E3904DC6A35E011BD7BB4829868FB43, xmp.iid:1F3904DC6A35E011BD7BB4829868FB43, xmp.iid:2531AE440036E01184E09BDCD52F7C9F, xmp.iid:2631AE440036E01184E09BDCD52F7C9F, xmp.iid:2731AE440036E01184E09BDCD52F7C9F, xmp.iid:2831AE440036E01184E09BDCD52F7C9F, xmp.iid:2931AE440036E01184E09BDCD52F7C9F, xmp.iid:2A31AE440036E01184E09BDCD52F7C9F, xmp.iid:2B31AE440036E01184E09BDCD52F7C9F, xmp.iid:2C31AE440036E01184E09BDCD52F7C9F, xmp.iid:2D31AE440036E01184E09BDCD52F7C9F, xmp.iid:2E31AE440036E01184E09BDCD52F7C9F, xmp.iid:72DE73980636E01184E09BDCD52F7C9F, xmp.iid:73DE73980636E01184E09BDCD52F7C9F, xmp.iid:74DE73980636E01184E09BDCD52F7C9F, xmp.iid:75DE73980636E01184E09BDCD52F7C9F, xmp.iid:76DE73980636E01184E09BDCD52F7C9F, xmp.iid:77DE73980636E01184E09BDCD52F7C9F, xmp.iid:78DE73980636E01184E09BDCD52F7C9F, xmp.iid:79DE73980636E01184E09BDCD52F7C9F, xmp.iid:7ADE73980636E01184E09BDCD52F7C9F, xmp.iid:7BDE73980636E01184E09BDCD52F7C9F, xmp.iid:7CDE73980636E01184E09BDCD52F7C9F, xmp.iid:8D3A2F1F1136E01184E09BDCD52F7C9F, xmp.iid:8E3A2F1F1136E01184E09BDCD52F7C9F, xmp.iid:8F3A2F1F1136E01184E09BDCD52F7C9F, xmp.iid:903A2F1F1136E01184E09BDCD52F7C9F, xmp.iid:913A2F1F1136E01184E09BDCD52F7C9F, xmp.iid:923A2F1F1136E01184E09BDCD52F7C9F, xmp.iid:933A2F1F1136E01184E09BDCD52F7C9F, xmp.iid:943A2F1F1136E01184E09BDCD52F7C9F, xmp.iid:953A2F1F1136E01184E09BDCD52F7C9F, xmp.iid:963A2F1F1136E01184E09BDCD52F7C9F, xmp.iid:7243B5BA3939E0119AE4C965260D2656, xmp.iid:7343B5BA3939E0119AE4C965260D2656, xmp.iid:7443B5BA3939E0119AE4C965260D2656, xmp.iid:7543B5BA3939E0119AE4C965260D2656, xmp.iid:7643B5BA3939E0119AE4C965260D2656, xmp.iid:7743B5BA3939E0119AE4C965260D2656, xmp.iid:7843B5BA3939E0119AE4C965260D2656, xmp.iid:7943B5BA3939E0119AE4C965260D2656, xmp.iid:7A43B5BA3939E0119AE4C965260D2656, xmp.iid:7B43B5BA3939E0119AE4C965260D2656, xmp.iid:EAF51003E239E011836691CE9C01BD23, xmp.iid:EBF51003E239E011836691CE9C01BD23, xmp.iid:ECF51003E239E011836691CE9C01BD23, xmp.iid:EDF51003E239E011836691CE9C01BD23, xmp.iid:EEF51003E239E011836691CE9C01BD23, xmp.iid:EFF51003E239E011836691CE9C01BD23, xmp.iid:F0F51003E239E011836691CE9C01BD23, xmp.iid:F1F51003E239E011836691CE9C01BD23, xmp.iid:F2F51003E239E011836691CE9C01BD23, xmp.iid:91E976B9103AE011836691CE9C01BD23, xmp.iid:92E976B9103AE011836691CE9C01BD23, xmp.iid:93E976B9103AE011836691CE9C01BD23, xmp.iid:94E976B9103AE011836691CE9C01BD23, xmp.iid:95E976B9103AE011836691CE9C01BD23, xmp.iid:96E976B9103AE011836691CE9C01BD23, xmp.iid:97E976B9103AE011836691CE9C01BD23, xmp.iid:98E976B9103AE011836691CE9C01BD23, xmp.iid:99E976B9103AE011836691CE9C01BD23, xmp.iid:9AE976B9103AE011836691CE9C01BD23, xmp.iid:9BE976B9103AE011836691CE9C01BD23, xmp.iid:2D78BB95203AE011836691CE9C01BD23, xmp.iid:2E78BB95203AE011836691CE9C01BD23, xmp.iid:2F78BB95203AE011836691CE9C01BD23, xmp.iid:3078BB95203AE011836691CE9C01BD23, xmp.iid:3178BB95203AE011836691CE9C01BD23, xmp.iid:3278BB95203AE011836691CE9C01BD23, xmp.iid:3378BB95203AE011836691CE9C01BD23, xmp.iid:3478BB95203AE011836691CE9C01BD23, xmp.iid:3578BB95203AE011836691CE9C01BD23, xmp.iid:3678BB95203AE011836691CE9C01BD23, xmp.iid:9CE4DFBBC53AE0118C06B0DAB25B7A4C, xmp.iid:9DE4DFBBC53AE0118C06B0DAB25B7A4C, xmp.iid:9EE4DFBBC53AE0118C06B0DAB25B7A4C, xmp.iid:9FE4DFBBC53AE0118C06B0DAB25B7A4C, xmp.iid:A0E4DFBBC53AE0118C06B0DAB25B7A4C, xmp.iid:7C8E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:7D8E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:7E8E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:7F8E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:808E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:818E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:828E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:838E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:848E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:858E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:868E391EF03AE0118C06B0DAB25B7A4C, xmp.iid:ED201153F23AE0118C06B0DAB25B7A4C, xmp.iid:EE201153F23AE0118C06B0DAB25B7A4C, xmp.iid:EF201153F23AE0118C06B0DAB25B7A4C, xmp.iid:F0201153F23AE0118C06B0DAB25B7A4C, xmp.iid:F1201153F23AE0118C06B0DAB25B7A4C, xmp.iid:F2201153F23AE0118C06B0DAB25B7A4C, xmp.iid:78AFC79C033BE011AF1AADC7F44346C4, xmp.iid:79AFC79C033BE011AF1AADC7F44346C4, xmp.iid:7AAFC79C033BE011AF1AADC7F44346C4, xmp.iid:7BAFC79C033BE011AF1AADC7F44346C4, xmp.iid:5E94D08C923BE011B9A0946151EE174D, xmp.iid:29DAF37EB33BE011B9A0946151EE174D, xmp.iid:2ADAF37EB33BE011B9A0946151EE174D, xmp.iid:2CDAF37EB33BE011B9A0946151EE174D, xmp.iid:2DDAF37EB33BE011B9A0946151EE174D, xmp.iid:FC537345B73EE011A740E044A8750986, xmp.iid:FD537345B73EE011A740E044A8750986, xmp.iid:FE537345B73EE011A740E044A8750986, xmp.iid:FF537345B73EE011A740E044A8750986, xmp.iid:00547345B73EE011A740E044A8750986, xmp.iid:0AB351CBDB3EE011A740E044A8750986, xmp.iid:0BB351CBDB3EE011A740E044A8750986, xmp.iid:0CB351CBDB3EE011A740E044A8750986, xmp.iid:B6254645783EE01181D0BC98DAA55CFC, xmp.iid:B7254645783EE01181D0BC98DAA55CFC, xmp.iid:210548E3AF44E0119F7291A71D9884C3, xmp.iid:46228686264EE011B6F9FDA4D672F30F, xmp.iid:47228686264EE011B6F9FDA4D672F30F, xmp.iid:4D228686264EE011B6F9FDA4D672F30F, xmp.iid:4E228686264EE011B6F9FDA4D672F30F, xmp.iid:4F228686264EE011B6F9FDA4D672F30F, xmp.iid:2AD1B205B04EE011B6F9FDA4D672F30F, xmp.iid:2BD1B205B04EE011B6F9FDA4D672F30F, xmp.iid:2CD1B205B04EE011B6F9FDA4D672F30F, xmp.iid:2DD1B205B04EE011B6F9FDA4D672F30F, xmp.iid:C9DC55467D4FE011A571B4F811FE19F1, xmp.iid:CADC55467D4FE011A571B4F811FE19F1, xmp.iid:0EE9501A844FE01194ECAD2F20604AA6, xmp.iid:0FE9501A844FE01194ECAD2F20604AA6, xmp.iid:10E9501A844FE01194ECAD2F20604AA6, xmp.iid:11E9501A844FE01194ECAD2F20604AA6, xmp.iid:3F7DFDAE944FE01194ECAD2F20604AA6, xmp.iid:407DFDAE944FE01194ECAD2F20604AA6, xmp.iid:7481C9275D54E0119CE2A5563E953266, xmp.iid:7581C9275D54E0119CE2A5563E953266, xmp.iid:7681C9275D54E0119CE2A5563E953266, xmp.iid:7781C9275D54E0119CE2A5563E953266, xmp.iid:A464AF39E958E0118D8DB50C31BC6A19, xmp.iid:A564AF39E958E0118D8DB50C31BC6A19, xmp.iid:A664AF39E958E0118D8DB50C31BC6A19, xmp.iid:A764AF39E958E0118D8DB50C31BC6A19, xmp.iid:EC768B4FA665E011AACFDDCC2D73138B, xmp.iid:ED768B4FA665E011AACFDDCC2D73138B, xmp.iid:853067D8257AE0118759B691748D1A50, xmp.iid:863067D8257AE0118759B691748D1A50, xmp.iid:0941EF53F780E01184779BB0801A5A01, xmp.iid:0A41EF53F780E01184779BB0801A5A01, xmp.iid:07139323A5B1E0118E4494FEA0AD28CC, xmp.iid:08139323A5B1E0118E4494FEA0AD28CC, xmp.iid:09139323A5B1E0118E4494FEA0AD28CC, xmp.iid:0A139323A5B1E0118E4494FEA0AD28CC, xmp.iid:0B139323A5B1E0118E4494FEA0AD28CC, xmp.iid:0C139323A5B1E0118E4494FEA0AD28CC, xmp.iid:0D139323A5B1E0118E4494FEA0AD28CC, xmp.iid:38C5EB0CB4B1E0118E4494FEA0AD28CC, xmp.iid:39C5EB0CB4B1E0118E4494FEA0AD28CC, xmp.iid:3AC5EB0CB4B1E0118E4494FEA0AD28CC, xmp.iid:3BC5EB0CB4B1E0118E4494FEA0AD28CC, xmp.iid:3CC5EB0CB4B1E0118E4494FEA0AD28CC, xmp.iid:3DC5EB0CB4B1E0118E4494FEA0AD28CC, xmp.iid:3EC5EB0CB4B1E0118E4494FEA0AD28CC, xmp.iid:3FC5EB0CB4B1E0118E4494FEA0AD28CC, xmp.iid:40C5EB0CB4B1E0118E4494FEA0AD28CC, xmp.iid:7ECC0BC6A7BCE011ADDDCB9D69A183D2, xmp.iid:7FCC0BC6A7BCE011ADDDCB9D69A183D2, xmp.iid:80CC0BC6A7BCE011ADDDCB9D69A183D2, xmp.iid:663EBF40D9BCE011B772BD9A51AE95F8, xmp.iid:673EBF40D9BCE011B772BD9A51AE95F8, xmp.iid:683EBF40D9BCE011B772BD9A51AE95F8, xmp.iid:46F4125F30BEE01182759810F008245D, xmp.iid:47F4125F30BEE01182759810F008245D, xmp.iid:48F4125F30BEE01182759810F008245D, xmp.iid:652E33EFCAD2E011AA18D2BFBA0B3901, xmp.iid:6BCB2E7FD3D2E011AA18D2BFBA0B3901, xmp.iid:6CCB2E7FD3D2E011AA18D2BFBA0B3901, xmp.iid:6DCB2E7FD3D2E011AA18D2BFBA0B3901, xmp.iid:6ECB2E7FD3D2E011AA18D2BFBA0B3901, xmp.iid:6FCB2E7FD3D2E011AA18D2BFBA0B3901, xmp.iid:70CB2E7FD3D2E011AA18D2BFBA0B3901, xmp.iid:71CB2E7FD3D2E011AA18D2BFBA0B3901, xmp.iid:72CB2E7FD3D2E011AA18D2BFBA0B3901, xmp.iid:73CB2E7FD3D2E011AA18D2BFBA0B3901, xmp.iid:2C5EDBEDD8D2E011AA18D2BFBA0B3901, xmp.iid:2D5EDBEDD8D2E011AA18D2BFBA0B3901, xmp.iid:335EDBEDD8D2E011AA18D2BFBA0B3901, xmp.iid:345EDBEDD8D2E011AA18D2BFBA0B3901, xmp.iid:91CEC1AFE7F3E011838CF2DB8CEB6501, xmp.iid:92CEC1AFE7F3E011838CF2DB8CEB6501, xmp.iid:93CEC1AFE7F3E011838CF2DB8CEB6501, xmp.iid:264132B172F4E0119D15E75A014D994A, xmp.iid:04B45B9743F6E011AA84F5E617E181B7, xmp.iid:05B45B9743F6E011AA84F5E617E181B7, xmp.iid:8E1E54904DF6E011AA84F5E617E181B7 History When : 2010:05:03 14:34:16-07:00, 2010:05:03 14:34:22-07:00, 2010:05:03 14:39:56-07:00, 2010:05:03 14:40:03-07:00, 2010:05:03 15:01:31-07:00, 2010:05:03 15:01:31-07:00, 2010:05:03 15:15:48-07:00, 2010:05:03 15:15:51-07:00, 2010:05:03 15:17:40-07:00, 2010:05:14 15:53:20-07:00, 2010:05:14 15:55:40-07:00, 2010:05:14 15:58:11-07:00, 2010:05:14 15:58:52-07:00, 2010:05:18 10:52:54-07:00, 2010:06:09 13:23:59-07:00, 2010:06:09 13:27:35-07:00, 2010:06:10 11:13:49-07:00, 2010:06:10 11:19:01-07:00, 2010:06:10 11:19:40-07:00, 2010:06:10 12:05:41-07:00, 2010:08:05 17:50:17-07:00, 2010:11:16 09:31:56-08:00, 2010:11:16 09:37:53-08:00, 2010:11:16 09:37:53-08:00, 2010:11:16 09:39:48-08:00, 2010:11:16 09:42:17-08:00, 2010:11:16 09:42:56-08:00, 2010:11:16 09:45:12-08:00, 2010:11:16 09:47:27-08:00, 2010:11:16 09:48:19-08:00, 2010:11:16 09:48:42-08:00, 2010:11:16 09:49:07-08:00, 2010:11:16 09:50-08:00, 2010:11:16 09:51:41-08:00, 2010:11:16 09:52:56-08:00, 2010:11:16 09:57:21-08:00, 2010:11:16 10:07:10-08:00, 2010:11:16 10:11:17-08:00, 2010:11:16 10:18:04-08:00, 2010:11:16 10:18:51-08:00, 2010:11:16 10:21:14-08:00, 2010:11:16 10:21:25-08:00, 2010:12:17 16:49:27-08:00, 2010:12:20 18:03:44-08:00, 2010:12:20 18:04:19-08:00, 2010:12:20 18:06:53-08:00, 2010:12:20 18:17:25-08:00, 2010:12:21 17:54:34-08:00, 2010:12:23 16:08:45-08:00, 2010:12:30 14:34:28-08:00, 2010:12:30 16:46:12-08:00, 2011:01:04 17:57:57-08:00, 2011:01:18 17:47:42-08:00, 2011:01:19 11:12:05-08:00, 2011:01:19 14:31:47-08:00, 2011:01:19 14:47:55-08:00, 2011:01:19 14:57:15-08:00, 2011:01:19 15:02:44-08:00, 2011:01:19 15:04:11-08:00, 2011:01:19 18:03:10-08:00, 2011:01:24 14:35:06-08:00, 2011:01:24 14:36:17-08:00, 2011:01:25 17:12:11-08:00, 2011:01:26 14:49:12-08:00, 2011:01:27 17:08:32-08:00, 2011:01:31 18:13:51-08:00, 2011:02:02 12:15:55-08:00, 2011:02:02 17:14:08-08:00, 2011:02:03 13:38:36-08:00, 2011:02:03 17:16:54-08:00, 2011:02:10 10:09:11-08:00, 2011:02:10 10:17:42-08:00, 2011:02:10 10:32:36-08:00, 2011:02:10 10:35:30-08:00, 2011:02:10 10:36:02-08:00, 2011:02:10 10:39:09-08:00, 2011:02:10 10:45:44-08:00, 2011:02:10 10:58:29-08:00, 2011:02:10 11:01:17-08:00, 2011:02:10 11:03:40-08:00, 2011:02:10 11:04:45-08:00, 2011:02:10 11:05-08:00, 2011:02:10 11:06:17-08:00, 2011:02:10 11:07:15-08:00, 2011:02:10 11:09:54-08:00, 2011:02:10 11:17:43-08:00, 2011:02:10 11:22:28-08:00, 2011:02:10 11:23:47-08:00, 2011:02:10 13:31:40-08:00, 2011:02:10 14:37:06-08:00, 2011:02:10 14:39:20-08:00, 2011:02:10 14:43:13-08:00, 2011:02:10 14:43:39-08:00, 2011:02:10 14:47:44-08:00, 2011:02:10 14:54:57-08:00, 2011:02:10 14:55:22-08:00, 2011:02:10 15:07:31-08:00, 2011:02:10 15:09:49-08:00, 2011:02:10 15:11:47-08:00, 2011:02:10 15:12:13-08:00, 2011:02:10 15:17:19-08:00, 2011:02:10 15:50:46-08:00, 2011:02:10 15:51:35-08:00, 2011:02:10 15:52:36-08:00, 2011:02:10 15:53:16-08:00, 2011:02:10 15:54:36-08:00, 2011:02:10 15:55:23-08:00, 2011:02:10 16:33:23-08:00, 2011:02:11 08:59:20-08:00, 2011:02:11 09:13:18-08:00, 2011:02:11 09:15:44-08:00, 2011:02:11 09:16:39-08:00, 2011:02:11 09:19:52-08:00, 2011:02:11 09:22:31-08:00, 2011:02:11 09:25:25-08:00, 2011:02:11 09:40:35-08:00, 2011:02:11 09:43:27-08:00, 2011:02:11 09:44:22-08:00, 2011:02:11 09:44:37-08:00, 2011:02:11 09:51:05-08:00, 2011:02:11 09:53:57-08:00, 2011:02:11 09:55:39-08:00, 2011:02:11 09:59:20-08:00, 2011:02:11 10:00:25-08:00, 2011:02:11 10:02:17-08:00, 2011:02:11 10:19:52-08:00, 2011:02:11 10:23:59-08:00, 2011:02:11 10:37:56-08:00, 2011:02:11 10:45:57-08:00, 2011:02:11 10:59:58-08:00, 2011:02:11 11:04:17-08:00, 2011:02:11 11:18:53-08:00, 2011:02:11 11:31:49-08:00, 2011:02:11 13:48:25-08:00, 2011:02:11 13:50:09-08:00, 2011:02:11 13:58:36-08:00, 2011:02:11 13:58:56-08:00, 2011:02:11 13:59:20-08:00, 2011:02:11 14:00:14-08:00, 2011:02:15 13:52:21-08:00, 2011:02:15 13:59:20-08:00, 2011:02:15 14:03:43-08:00, 2011:02:15 14:13:07-08:00, 2011:02:15 14:13:59-08:00, 2011:02:15 14:33:28-08:00, 2011:02:15 14:33:46-08:00, 2011:02:15 15:14:58-08:00, 2011:02:15 16:18:21-08:00, 2011:02:15 16:19:51-08:00, 2011:02:16 08:57:48-08:00, 2011:02:16 09:14:43-08:00, 2011:02:16 10:23:31-08:00, 2011:02:16 10:24:44-08:00, 2011:02:16 10:25:45-08:00, 2011:02:16 11:17:15-08:00, 2011:02:16 12:29:30-08:00, 2011:02:16 12:31:32-08:00, 2011:02:16 12:45:08-08:00, 2011:02:16 13:07:12-08:00, 2011:02:16 13:09:19-08:00, 2011:02:16 13:20:34-08:00, 2011:02:16 13:22:44-08:00, 2011:02:16 14:00:28-08:00, 2011:02:16 14:01:24-08:00, 2011:02:16 14:14:09-08:00, 2011:02:16 14:14:19-08:00, 2011:02:16 14:45:17-08:00, 2011:02:16 14:58:44-08:00, 2011:02:16 14:59:29-08:00, 2011:02:16 15:00:44-08:00, 2011:02:16 15:01:21-08:00, 2011:02:16 15:02:33-08:00, 2011:02:16 15:03:22-08:00, 2011:02:16 15:04:02-08:00, 2011:02:16 15:04:32-08:00, 2011:02:16 15:07:09-08:00, 2011:02:16 15:07:45-08:00, 2011:02:16 15:12:39-08:00, 2011:02:16 15:41:33-08:00, 2011:02:17 11:11:52-08:00, 2011:02:17 14:55:01-08:00, 2011:02:17 15:26:28-08:00, 2011:02:17 15:29:07-08:00, 2011:02:17 15:29:18-08:00, 2011:02:17 15:46:19-08:00, 2011:02:17 15:47:25-08:00, 2011:02:17 15:49:33-08:00, 2011:02:17 15:50:43-08:00, 2011:02:17 15:51:07-08:00, 2011:02:17 15:56:41-08:00, 2011:02:17 15:57:58-08:00, 2011:02:17 15:58:44-08:00, 2011:02:17 16:00:30-08:00, 2011:02:17 16:01:20-08:00, 2011:02:17 16:01:48-08:00, 2011:02:17 16:02:07-08:00, 2011:02:17 16:02:29-08:00, 2011:02:17 17:22:08-08:00, 2011:02:17 17:25:15-08:00, 2011:02:17 17:26:35-08:00, 2011:02:17 17:26:50-08:00, 2011:02:17 18:05:52-08:00, 2011:02:17 18:12:45-08:00, 2011:02:17 18:15:14-08:00, 2011:02:17 18:15:14-08:00, 2011:02:18 15:02:47-08:00, 2011:02:18 15:04:53-08:00, 2011:02:18 15:06:56-08:00, 2011:02:18 16:39:40-08:00, 2011:02:18 16:39:59-08:00, 2011:02:22 15:02:23-08:00, 2011:02:22 15:06:39-08:00, 2011:02:22 15:09:31-08:00, 2011:02:22 15:14:19-08:00, 2011:02:22 15:16:47-08:00, 2011:02:22 15:30:55-08:00, 2011:02:22 15:31:51-08:00, 2011:02:22 15:31:51-08:00, 2011:02:23 11:20:37+08:00, 2011:02:23 11:22:30+08:00, 2011:03:03 11:32:26+08:00, 2011:03:14 18:33:39+08:00, 2011:03:14 18:36:37+08:00, 2011:03:14 19:15:45+08:00, 2011:03:14 19:16:24+08:00, 2011:03:14 19:21:41+08:00, 2011:03:15 15:49:28+08:00, 2011:03:15 15:51:38+08:00, 2011:03:15 15:52:08+08:00, 2011:03:15 15:52:09+08:00, 2011:03:16 11:37:08+08:00, 2011:03:16 11:39:44+08:00, 2011:03:16 13:44:55+08:00, 2011:03:16 13:49:19+08:00, 2011:03:16 13:56:15+08:00, 2011:03:16 13:57:29+08:00, 2011:03:16 14:19:29+08:00, 2011:03:16 14:20:41+08:00, 2011:03:24 16:05:20+08:00, 2011:03:24 16:05:21+08:00, 2011:03:24 16:17:41+08:00, 2011:03:24 16:21:22+08:00, 2011:03:28 11:12:33+08:00, 2011:03:28 11:19:07+08:00, 2011:03:28 14:31:46+08:00, 2011:03:28 14:35:31+08:00, 2011:04:14 14:26:57+08:00, 2011:04:14 14:57:50+08:00, 2011:05:10 09:48:05+08:00, 2011:05:10 09:48:47+08:00, 2011:05:18 11:40:59+08:00, 2011:05:18 11:41:39+08:00, 2011:07:19 10:26:08+08:00, 2011:07:19 10:26:08+08:00, 2011:07:19 10:35:47+08:00, 2011:07:19 10:39:14+08:00, 2011:07:19 10:55:21+08:00, 2011:07:19 10:56:52+08:00, 2011:07:19 11:00:39+08:00, 2011:07:19 11:06:09+08:00, 2011:07:19 11:12:16+08:00, 2011:07:19 11:16:55+08:00, 2011:07:19 11:21:27+08:00, 2011:07:19 11:22:53+08:00, 2011:07:19 11:27:44+08:00, 2011:07:19 11:27:59+08:00, 2011:07:19 11:29:14+08:00, 2011:07:19 11:29:15+08:00, 2011:08:02 10:39:07+08:00, 2011:08:02 10:40:32+08:00, 2011:08:02 10:41:34+08:00, 2011:08:02 15:30:10+08:00, 2011:08:02 15:31:06+08:00, 2011:08:02 16:28:41+08:00, 2011:08:04 08:38+08:00, 2011:08:04 08:38:34+08:00, 2011:08:04 08:40:09+08:00, 2011:08:30 14:43:54+08:00, 2011:08:30 14:44:23+08:00, 2011:08:30 14:45:24+08:00, 2011:08:30 14:45:57+08:00, 2011:08:30 14:45:57+08:00, 2011:08:30 15:00:51+08:00, 2011:08:30 15:00:53+08:00, 2011:08:30 15:16:47+08:00, 2011:08:30 15:17:11+08:00, 2011:08:30 15:17:11+08:00, 2011:08:30 15:26:36+08:00, 2011:08:30 15:27:02+08:00, 2011:08:31 09:38:42+08:00, 2011:08:31 09:39:50+08:00, 2011:10:11 17:22:18+08:00, 2011:10:11 17:32:30+08:00, 2011:10:11 17:33:04+08:00, 2011:10:12 10:25:35+08:00, 2011:10:14 18:12:49+08:00, 2011:10:14 18:14:29+08:00, 2011:10:14 18:17:36+08:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /metadata, /, /metadata, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /metadata, /;/metadata, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, / Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00, 300.00, 300.00, 150.00, 300.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00 Manifest Placed Y Resolution : 300.00, 300.00, 300.00, 300.00, 150.00, 300.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : xmp.iid:E14FCEF5B0D2E011B8CECF02CD1BD85D, xmp.iid:F4BA53CCEB59DF1187D4F5F41DCEBD8E, uuid:75A1375BB636DF119F59BFAAF702F212, uuid:FD2C9D0BB636DF11B65DFC809A52A4D0, xmp.iid:827551A2ED63E011BF3CAFAE8E2B35EC, xmp.iid:5DF789DBAEBCE011869883B9B9E18E95, uuid:757b79f8-fa08-11d9-9634-db5cd49ad058, uuid:757b79f8-fa08-11d9-9634-db5cd49ad058, xmp.iid:E90FCC4B0836E011B1CF89526D07C143, xmp.iid:01703AFAC83AE011A4D2D995CCDE6796, xmp.iid:D21634525C4BE011B5DABC3F7215568F, uuid:CA8115DC0955DD1197EA9F8BADD09E14, xmp.iid:522A740A324CE0118AEDB1F96A94051B, xmp.iid:09C84CFFF739E011B2A7DAEFC4717D24, xmp.iid:81D6C89C0136E011B1CF89526D07C143, xmp.iid:47BCB8076735E0118027DB99F4044C75, xmp.iid:48BCB8076735E0118027DB99F4044C75, xmp.iid:49BCB8076735E0118027DB99F4044C75, xmp.iid:4ABCB8076735E0118027DB99F4044C75, xmp.iid:4BBCB8076735E0118027DB99F4044C75, xmp.iid:4CBCB8076735E0118027DB99F4044C75, xmp.iid:E2993931AEB1E011AA1C9728C16AEC16, xmp.iid:E4993931AEB1E011AA1C9728C16AEC16, xmp.iid:E6993931AEB1E011AA1C9728C16AEC16, xmp.iid:E8993931AEB1E011AA1C9728C16AEC16, xmp.iid:49B358CAB6B1E011AA1C9728C16AEC16, xmp.iid:48B358CAB6B1E011AA1C9728C16AEC16, uuid:713D67A9A2B5DD11843DE0DA141338ED, xmp.iid:4C66886A4235E0118027DB99F4044C75, xmp.iid:E24E1C733424E0118691DA10BD4B679B, uuid:40674894EDBCDE1185D1D9D309EE1DFE, uuid:43674894EDBCDE1185D1D9D309EE1DFE, uuid:9704D86E7F4FDC11A05FE732C1FAED7F, uuid:555EA4107B4FDC11A05FE732C1FAED7F, uuid:555EA4107B4FDC11A05FE732C1FAED7F, uuid:9704D86E7F4FDC11A05FE732C1FAED7F, uuid:595EA4107B4FDC11A05FE732C1FAED7F, uuid:ed645c8c-4cba-11da-bf84-f59405901279, uuid:31c0b145-4d52-11da-9063-86e0e23ed818, uuid:4e2f0bb9-4cbb-11da-bf84-f59405901279, uuid:ed645c8c-4cba-11da-bf84-f59405901279, uuid:4e2f0bb9-4cbb-11da-bf84-f59405901279, uuid:5baa3ab9-f546-11d9-80f7-b1c380115801 Manifest Reference Document ID : uuid:2EFF39B8197911DF8009E95A9DDD0D23, uuid:FC2C9D0BB636DF11B65DFC809A52A4D0, uuid:74A1375BB636DF119F59BFAAF702F212, uuid:FC2C9D0BB636DF11B65DFC809A52A4D0, xmp.did:7C4CF332E163E011BF3CAFAE8E2B35EC, uuid:AC6A6E1366DADE11872CB1ECAE5E4AB3, adobe:docid:photoshop:49f3ef52-fa08-11d9-9634-db5cd49ad058, adobe:docid:photoshop:49f3ef52-fa08-11d9-9634-db5cd49ad058, xmp.did:E90FCC4B0836E011B1CF89526D07C143, xmp.did:01703AFAC83AE011A4D2D995CCDE6796, xmp.did:D21634525C4BE011B5DABC3F7215568F, uuid:C98115DC0955DD1197EA9F8BADD09E14, xmp.did:522A740A324CE0118AEDB1F96A94051B, xmp.did:09C84CFFF739E011B2A7DAEFC4717D24, xmp.did:81D6C89C0136E011B1CF89526D07C143, xmp.did:47BCB8076735E0118027DB99F4044C75, xmp.did:48BCB8076735E0118027DB99F4044C75, xmp.did:49BCB8076735E0118027DB99F4044C75, xmp.did:4ABCB8076735E0118027DB99F4044C75, xmp.did:4BBCB8076735E0118027DB99F4044C75, xmp.did:31DF62AB4423E01198949A1415D4D7D6, xmp.did:D7257D836B35E0118027DB99F4044C75, xmp.did:E3993931AEB1E011AA1C9728C16AEC16, xmp.did:B9360B38C592E011ADC3CBE3B8E65E20, xmp.did:E20FCC4B0836E011B1CF89526D07C143, xmp.did:49B358CAB6B1E011AA1C9728C16AEC16, xmp.did:48B358CAB6B1E011AA1C9728C16AEC16, uuid:739FA5C58162DD11BC98E30F44A381D0, xmp.did:DD4E1C733424E0118691DA10BD4B679B, xmp.did:E04E1C733424E0118691DA10BD4B679B, uuid:3F674894EDBCDE1185D1D9D309EE1DFE, uuid:42674894EDBCDE1185D1D9D309EE1DFE, uuid:9604D86E7F4FDC11A05FE732C1FAED7F, uuid:545EA4107B4FDC11A05FE732C1FAED7F, uuid:545EA4107B4FDC11A05FE732C1FAED7F, uuid:9604D86E7F4FDC11A05FE732C1FAED7F, uuid:585EA4107B4FDC11A05FE732C1FAED7F, adobe:docid:photoshop:ed645c8b-4cba-11da-bf84-f59405901279, adobe:docid:photoshop:31c0b141-4d52-11da-9063-86e0e23ed818, adobe:docid:photoshop:4e2f0bb6-4cbb-11da-bf84-f59405901279, adobe:docid:photoshop:ed645c8b-4cba-11da-bf84-f59405901279, adobe:docid:photoshop:4e2f0bb6-4cbb-11da-bf84-f59405901279, adobe:docid:photoshop:3d378fe2-f545-11d9-80f7-b1c380115801 Doc Change Count : 6595 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Has XFA : No Page Count : 60 Creator : Adobe InDesign CS4 (6.0)EXIF Metadata provided by EXIF.tools