DENSO TEN FT0108A Car Audio User Manual Latest User s Manualx

Download:
Mirror Download [FCC.gov]
Document ID	3174858
Application ID	0kiYBytErfezxsWUuANRng==
Document Description	(Short-Term Confidential) User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.56kB (194535 bits)
Date Submitted	2016-10-26 00:00:00
Date Available	2017-04-25 00:00:00
Creation Date	2016-10-25 13:41:38
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2016-10-25 13:53:13
Document Title	Latest User's Manual.xlsx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	eiji.miyazawa

User's Manual
FT0108A
Car Audio
Audio con monitor
La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar
su operación no deseada.
Fujitsu Ten Confidencial
䈜The screen design may be changed.
䈜El diseño de la pantalla se cambio.
Connect Bluetooth phone (Pairing)
Una el teléfono del Bluetooth (Dispositivo)
1.Press the ෞ button
1.empuje el botón de ෞ
2.Touch "+".
2.Toque "+".
3.Press Add Device and then select Bluetooth 4.Search the name on the display from your cell phone.
empuje "conector telefono" y luego selecciona 4.Busque su teléfono celular en la pantalla.
selecciona el bluetooth
5. Select Pair both radio and your cellphone
5.Seleccione dispositivo su teléfono celular
6. Select Set as favorite or skip
6. Seleccione favorito o cancelar
7.Completed connection
7.Conexión completada
Fujitsu Ten Confidencial
Make a call
Haga una llamada
1.Press the ෞ button
1.empuje el botón de ෞ
2.Press phone number want to call and ෞ button
2.empuje número de teléfono quieren llamar y empuje ෞ
Receive a call
Reciba una llamada
1.Press "Answer".
1.empuje "Respuesta".
2.Show up following display while receiving call
2.ve la pantalla siguiente recibiendo la llamada
Fujitsu Ten Confidencial
Connect Wifi䚹
Wi-Fi de conexión
1.Press the Settings Button
1.empuje botón de configuracion
䘚
3.Press
mark
3.empuje señal
䘚
2.Press Wi-Fi Networks.
2.empuje redes del Wi-Fi.
4.Change Wi-Fi Services status to ON and search Wifi equ
Type Wi-Fi Password and then completed connection.
4.encienda el estado de Wi-Fi Services
entonces busque el equipo de Wi-Fi
contraseña del Wi-Fi de la entrada y conexión completada
Fujitsu Ten Confidential
FCC ID : BABFT0108A
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the
passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several
special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the
RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one
of the aforementioned packets is being transmitted. In other words, this device automatically discontinue
transmission in case of either absence of information to transmit or operational failure.
Frequency Tolerance: +/-4 ppm
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the
radiator at least 20cm or more away from person’s body.
IC : 2024B-FT0108A
High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 56505850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Les radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les
bandes 5250-5350 MHz et 5650-5850 MHz, et ces radars pourraient causer du brouillage et/ou des dommages
aux dispositifs LAN-EL.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Data transmission is always initiated by software, which is the passed down through the MAC, through the digital
and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the
only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the
packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In
other words, this device automatically discontinue transmission in case of either absence of information to
transmit or operational failure.
La transmission des données est toujours initiée par le logiciel, puis les données sont transmises par
l'intermédiaire du MAC, par la bande de base numérique et analogique et, enfin, à la puce RF. Plusieurs paquets
spéciaux sont initiés par le MAC. Ce sont les seuls moyens pour qu'une partie de la bande de base numérique
active l'émetteur RF, puis désactive celui-ci à la fin du paquet. En conséquence, l'émetteur reste uniquement
activé lors de la transmission d'un des paquets susmentionnés. En d'autres termes, ce dispositif interrompt
automatiquement toute transmission en cas d'absence d'information à transmettre ou de défaillance.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets
RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping
the radiator at least 20cm or more away from person’s body.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non
contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement
doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.
Fujitsu Ten Confidential

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : eiji.miyazawa
Create Date                     : 2016:10:25 13:41:38+09:00
Modify Date                     : 2016:10:25 13:53:13+09:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:10:25 13:53:13+09:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Creator                         : eiji.miyazawa
Title                           : Latest User's Manual.xlsx
Document ID                     : uuid:da8ff7d3-f85d-4edf-9285-79c0838a868f
Instance ID                     : uuid:227c2dd0-73bf-48e3-9eed-f553669975ae
Page Count                      : 5

EXIF Metadata provided by EXIF.tools