DOGCARE INNOVATION and TECHNOLOGY TC01C1 Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3213583
Application ID	MorUHi9JWXQfnddKA7A+HA==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	479.49kB (5993670 bits)
Date Submitted	2016-11-30 00:00:00
Date Available	2016-11-30 00:00:00
Creation Date	2016-11-09 10:53:48
Producing Software	Adobe PDF library 15.00
Document Lastmod	2016-11-09 10:53:49
Document Title	Users Manual
Document Creator	Adobe Illustrator CC 2015 (Windows)

User Manual
I. Accessories
r.
a ham. mariar
- 9
i 9
nuslrhbrylnywlrs marivrrd OUxeernult aXltlmncaP
Remote Control
l Electric shock intensity regulator/ON&OFF
z Antenna
3 Keypad lock
IA} Screen
5 Electric shock button
:6; Electric shock intensity regulator lunction activate
button
JChannei swrtch button/March button
a Vibrate button
19‘, Beep button
11 Micro use
Screen
ciAdd multiple receivers
'Da step “z)’ ltyou want adding more than
one receiver. do step “at“ one by one Do not
charge aH receiver: at the same time. or It WI“
march all at them in the Same channel
~Rress and hold channel swuch/March button
tor rive seconds. Until receiver vibrates and
beeps. March is complete
,7‘17,
033$
patfigg
@degtcEt
a Training mode
b cnannei display (1 to e)
c. Electric shock intensity display (at to 99)
i d Keypad lock
e Remote control signal display
r Remote control battery level
g Receiver battery level
it. Set up
1. charge the devices respectively tor 2
hours and above.
a) Remote control‘ The battery icon ot remote
control will be rull otter it is My charged
b) Receiver When red light on the receiver
turns green. it is lully charged
2. March the remote control and receiver
a) you must connect your receiver With power
rirst. in orderto activate receiver‘s marching
mode Alter the charging red light on. you
may start the tollowrng “or and “c)“
b) March the receiverwith remote control
'Dc step ”a)”
'Press and hold channel switctharch button
tor live seconds Urltlt receiver vibrates and
beeps. March is complete.
5, + 5 seconds
D a 5 slcnnds
The channel display will show the channel number
at the new receiver (The channel number is
between t and 9.)
3. Remove all Marcned receivers
Press and hold Electric shock intensity
regulator tunction activate button and Beep
button at the same time tor 3 seconds
AH Marched receivers are removed
(Make sure all receivers you want remove have
power and in the enactive range. So that
receivers could receive remove command)
4.5-t up the voltage level.
Press and hold Electric shock intensity regulator
runction activate button and simultaneously rotate
Electric shock intensity regulator until the digit on
the screen reaches a suitable strength
pi second. Ft
Recommended voltage start trom “10". it is the
minimum voitage your dog can reel it. There is
individual dmerence. always use the right
voltage tor your dog.
iii. Training Mode
t Press vibrate button. and the receiverwill
vibrate once. hold the button and the vibration
persists.
2 Press sound button. and the receiverWiil
give a "beep” sound. hold the button. and the
“beep" sound persists
3 Press the electric shock button. and the receiver
Will give an electric shock. do not hold the button.
it you ' 'I by ac ' em.‘ '|| stop electric
shock in 4 seconds automat
4 Press the channel switch button to choose
which receiver you want to control it you march
more than one receiver
iv. Receiver collar Wearing
. Thread the collar through the receiver.
. ltyourdog has thick hair. please separate
the hair at the etectrodes with a comb to
make the electrodes lrl close Contact with
the Skin
3. When wearing the device. the tightness is
most sultabte If one finger can be Inserted
4 Please deClde whetherto use the oohduc
tive silicone sheath or not depending on the
sensitivuy ot dog skin. it will lowerthe shock
teetlrlgs if you wear the sltlcane sheath
res
v Notice:
1. PowerSaving
’Euth Remote Contrat and Receiver have
automatic powercsavlrlg mode. they wrll
automatically enter power-saving sleep
mode it idle tor 20 minutes and be
reactivated by pressing any button It is a
normal Situation that the responsectlme at
the system will has i second delay in each
time reactivated
2. Automatic Elec ' shoc not allowed
‘Autonlatlt: electric shock tunctlorl IS
avoided in productdesign. the right to use
electric shock is entirely control by user
'Antl mlsaperatlon design. press and hotd
shock button tor A seconds. remote control
will stop sending any command Please do
not press and hold shock button in any
situation. it might hurting your dogs
'Elect c shock mode is the punishment
trai ng way, no dog likes it. Always
praise and encourage your dog tor good
behavior.
3. Accessories are replaceable
‘The collar is a tixed accessory and is not
necessarily suitable tor all types or dog
breeds We suggest you reptace It with a
more suitable one Any lower than ZAmm
wide. 5mm thick and made oi soft material
is suitable lorthe receiver.
“there are conductive sltlcone caps at the
electrodes to protect the neck skin at the
dog. still please pay more attention to the
dog‘s skin situation during use
4. NO Ead dog, but Bad Owner
‘Please ol'leryour dog more patience and
love.
VI. Trouble shooting
1. Remote control/Receiver runs out or
batteries quickly.
‘Make sure the charger and Remote
control/Receiver is securely connected
'Charge it up to 2 hours or above
2. Remote control doesn't work.
'Recharge the Remote control.
'Check the keypad lock. Unlock the remote
control
”March Remote control and Receiver again.
3. The Receiver doesn't respond.
’Make sure the Receiver had been marched
‘Check your Remote control. make sure this
Receiver is in the right channel.
‘Check your Remote control. make sure the
Receiver and Remote control have enough
power
A. The training system has no et'tlct on my dog.
‘Make sure the Receiver is working and the
shocking prongs touch dog-s skin closely
‘Try increasing the intensity level
5. The training mode is only available in short
range.
’Make sure there don't have strong signal
interrerence irom your surroundings The
Remote controls range could lluctuate sublect
to surroundings. obstacles. oreven the
weather
a. The Receiver peeps. vibrates or shocks by
itself constantly or occasionally.
'Make sure any button oi Remote control has
not been touched
'March Receiverwith the Remote control
once again
7. Remote control/Receiver cannot be
marched.
'Recelver must connect to the power and the
charging red light will on when you marching.
This is anti interrerence design.
VII. Training Notice
1 This product is used tortraining dogs and your
husband. please do not use it lorother
purpose Giving some rood to dog wrii help to
achieve the best eltect
2 Please do not use it tordogs aged below a
months. aggressive dogs. old dogs or sick
ones
3 Use verbal commands mat. and supplement
with a corrective stimulus only as needed. Be
onsistentwnh yourverpal commands. using
the same words every time Work with your
pet on one behaviorat a time to avoid
contusion and trustration Use as little
stimulus as possible and only to reiniorce
verbal commands when necessary Do not
over conect your dog
A For example. use the beeps as warning by
pressing Beep button The dog will become
conditioned to the beep preceding the c
orrective stimulus and will soon learn to
recognize the beep as a warning atong with
your verbal command Do not rely on this
product solely to train yourdog Some dogs
will not respond to this product. We cannot
guarantee the errectiveness or this or any
trainer on yourdog llyourdog shows signs or
growling. snarling. biting or aggression while
using the collar. discontinue use immediately
and contact a prolessional trainerioradvice
VIII. Saiety Guidelines
1 it is strictly prohibited to open the receiverin
any situation. otherwrse the waterprool
runction may be damaged to violate warranty
rules
2 ln orderto guarantee normal diving lunction.
please insert the waterproor rubber charging
lid in place
3 Please use remote control and receivers ota
complete set. and do not use other product to
march with the receiver
4 ilyou want to test the product. please use
protessional test accessories provided. Do not
test with hands. so as to avoid accidental
iniury
5 ilthere is any waterat the charging hole.
please wipe it dry betore charging.
6 This product is not a regularcoliarand cannot
replace coliarto lead a dog
7 Do not Wearing the coilarover t2 hours. it
may cause a condition at skin intection.
ix Terms or use and L tation on a ty
t Use oithis product means you accept all the
terms and conditions
2 This product is a protessionai dog training
device You are not recommended to use this
product it your dog is clever and less than 5
pounds in weight ltyou‘re not sure whether
the product is suitable ror your pet dog. please
consult a prolessional handlerorcontact us
3 This product is a prolessional dog training
device and cannot be used tor other
purposes. Please do not violate local laws in
using this product
4 We bear no liability ior any direct or indirect
losses caused by use or misuse ot this
product. all risks in using this product shall be
borne by user
5 Please contact the dealer lor pans wananty.
goods return or exchange We provide
technical support only
5 We reserve the right to change the terms.
conditions and notices or this product are
oirered
x Fcc Statement
This device complies wrth Part to oithe FCC
Rules Operation is sublect to the ioiiowing two
conditions
(ti This device may not cause harmiul interior-
ence. and (2) This device must accept any
interrerence received. including interrerence that
may cause undesired operation
Warning: Changes or modifications not expressly
approved by the party responsibletor compliance
could void the user‘s authonty to operate the
equipment
Note: This equipment has been tested and iound
to comply With the limits ror a Class B digital
device. pursuant to Part 15 orthe FCC Rules
These limits are designed to provide reasonable
protection against harmlul interierence in a
residential installation. This equipment generates
uses and can radiate radio ireguency energy and.
r not installed and used in accordance with the
instructions. may cause harmiul interierence to
radio communications however. there is no
guarantee that interrerence will not occur in a
particular installation it this equipment does
cause harmiul lntertererice to radio or television
reception. which can be determined by turning
the equipment on and on. the useris encouraged
to try to conect the interterence by one or more or
the lollowing measures
1 Reonent or relocate the receiVing antenna
2 increase the separation between the
equipment and receiver
3 Connect the equipment into an outlet on a
circuit dirrerent trorn that to which he receiver is
connected
4 Consult the dealer or an experienced radioiTv
technician tor help

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c111 79.158366, 2015/09/25-01:12:00
Format                          : application/pdf
Title                           : 电子训狗器说明书
Metadata Date                   : 2016:11:09 10:53:49+08:00
Modify Date                     : 2016:11:09 10:53:49+08:00
Create Date                     : 2016:11:09 10:53:48+09:00
Creator Tool                    : Adobe Illustrator CC 2015 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 92
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 11360 bytes, use -b option to extract)
Instance ID                     : uuid:0027fff6-dbd1-4948-8a8c-cc669b7fc3bd
Document ID                     : xmp.did:9b8b3a06-c669-1d42-ad35-ed0fde05ba7b
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:e0216fe6-188b-a148-9ef4-9bae9ccad2a2
Derived From Document ID        : xmp.did:FB7F11740720681183D1EBFB319F297C
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:631B9536B89CE611ACB88F343B411515, xmp.iid:9b8b3a06-c669-1d42-ad35-ed0fde05ba7b
History When                    : 2016:10:28 10:42:48+08:00, 2016:11:09 10:53:32+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CC 2015 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 520.001352
Max Page Size H                 : 200.000200
Max Page Size Unit              : Millimeters
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 15.00
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 17.0
For                             : Vita.ղ����,
Bounding Box                    : -718 -1149 721 -635
Container Version               : 11
Creator Version                 : 19

EXIF Metadata provided by EXIF.tools