Dacor DDWF24S User Manual DISHWASHER Manuals And Guides 1011398L
User Manual: Dacor DDWF24S DDWF24S DACOR DISHWASHER - Manuals and Guides View the owners manual for your DACOR DISHWASHER #DDWF24S. Home:Kitchen Appliance Parts:Dacor Parts:Dacor DISHWASHER Manual
Open the PDF directly: View PDF 
.
Page Count: 19
Installation Instructions
24-Inch Built-in Dishwasher
Model DDWF24S
Part No. 106811 Rev. D
Important Safety Instructions ......................... 1
Important Information on Safety Instructions .. 1
Safety Symbols and Labels ............................ 1
General Safety Precautions ............................ 2
Product Specifications .................................... 3
Product Dimensions ........................................ 3
Preparing for Installation ................................. 4
Electrical Specifications .................................. 4
Water Supply Specifications ........................... 4
Preparing the Location .................................... 5
Preparing for Installation ................................. 6
Preparing the Drain ......................................... 6
Installation Instructions ................................... 7
Verify the Package Contents ........................... 7
Installation Preparation ................................... 8
Installing the Unit in the Cabinet ..................... 9
Water Line Connection .................................. 10
Verifying Operation ........................................ 10
Final Leveling ................................................ 11
Attaching the Anti-tip Brackets ...................... 12
Installing the Toe Kick ................................... 12
Installation Checklist ..................................... 13
Important:
Installer: In the interest of safety and to minimize problems, read these installation instructions completely and
carefully before you begin the installation process. Leave these installation instructions with the customer.
Customer: Keep these installation instructions for future reference and the local electrical inspector's use.
If You Need Help...
If you have questions or problems with installation,
contact your Dacor ® dealer or the Dacor Customer
Service Team. For repairs to Dacor appliances under
warranty call the Dacor Distinctive Service line.
Whenever you call, have the model and serial number
of the appliance ready. The model and serial number
are printed on the product data label.
Dacor Distinctive Service
(repairs under warranty only)
Phone: (877) 337-3226 (U.S.A. and Canada)
Monday -- Friday 6:00 A.M.to 4:00 P.M.Pacific Time
Dacor Customer Service
Phone: (800) 793-0093 (U.S.A. and Canada)
Monday -- Friday 6:00 A.M. to 5:00 P.M. Pacific Time
Web site: www.Dacor.com
Product Data Label Location
The product data label is located on the right door
jamb. Open the door to expose it.
All specifications are subject to change without notice.
Dacor assumes no liability for changes to specifications.
© 2010 Dacor, all rights reserved.
Important Information About
Safety Instructions
•The Important Safety Instructions and
warnings in these instructions are not meant
to cover all possible problems and conditions
that can occur. Use common sense and caution
when installing, maintaining or operating this or
any other appliance.
• Always contact the Dacor Customer Service
Team about problems and conditions that you
don't understand. See Customer Service
Information.
Safety Symbols and Labels
Immediate hazards that WILL reSult in
personal injury or death. .............. I
[_ WARNING
Hazards or Unsafe practices that COULD result in
severe personal injury or death. ...........
I1_ CAUTION I
Hazards or unsafe practicesthatCOULD resultin
m nor persona njury or pr0perty damagel
[_] DANGER I
To avoid the p0ssibility of exPloSion o[ fire, don0t store o use combustiblel flammable or explosive VaP0rs I
and liquids (such as gasoline) inside or in the vicinity of this or any other appliance. Do not store flammable
or explosive materials in adjacent cabinets or areasl
[_ WARNING I
A qualified technician must complete the installation of this builtiin appliancel The owner is resPonsible to I
make sure the dishwasher is properly installed. Improper connection of the electrical wiring may create an
electric shock or fire hazard and may result in damage tothe dishwasher S electrical systeml I
READ AND SAVE THESE INSTRUCTIONS
_mCD_ 1
General Safety Precautions
WARNING - To reduce the risk of fire, electric shock, serious injury or death when using your appliance, follow
basic safety precautions, including the following:
WARNING
* Use this dishwaSher only f0r its intended
purpose as outlined in the use and care
manual: It is not intended for commercial usel
Read the use and care manual completely
• Do not instal! or operate this dishwasher if it
ha s been damaged, dropped, ha s damaged
electrical wires or is not working properly, If
you receive a damaged product, immediately
contact your dealer or builder.
' KeeP all paCkaging materials away from
children. Plastic bags and sheets can cause
suffocation.
preyent child entrapment, always remove the
door from an old dishwasher when removing it
from service. Leave the racks in place. Cut the
prongs Off of the power cord, cut off the power
cord completely and discard!
• To avoid personal injury or property damage,
this dishwasher must be installed in a
c0mpletely enclosed cabinet according to these
installation instructionsl
• AIi installation Workl plumbing connections
an d e!ectricalwJring must be performed in
accordanc e with all applicab! e codes and
standards.
' InStall or 10catethis appliance only in
accordance with these installation instructions.
•The installer must show the customer the
10cation of the electrical outlet Or circuit breaker
panel SO that the customer knows where and
howto disconnect power.
• Before installing or servicing the dishwasher ,
disconnect the power plug from the electrical
outlet or turnoff power at the circuit breaker.
' prevent Pers0nal injuiy and damage to the
unit due to it tipping over, d0 not push down
on the door anYtime it is open. To reduce the
chance of tipping, attach the anti-tip brackets to
! the cabinet before use i
The cust0mei Sh0uld n0t instal i repair
replace any part of the dishwasher unless
sPecifically recom mended !n the literature
accompanying it. A qualified service technician
should perform all 0the_service. Contact the
nearest Dacor auth0rized service representative
for examination, repair or adjustment,
WARNING
• Do not tamper with the controls.
• This appliance is designed for installation by
more than one person. To avoid personal injury,
do not attempt to move or lift the dishwasher
without assistance.
• Do not leave children alone or unattended in
the area where the dishwasher is in use.
• Use only detergents and rinse aids recommend-
ed for use in a residential dishwasher. Keep
them out of the reach of children.
• Never allow anyone, including children, to sit or
stand on any part of the dishwasher. Stepping
or sitting on any part of it may result in tipping,
damage and serious injury.
• tf the dishwasher drain outlet is connected to
a garbage disposer, make sure the disposer
is completely empty before running the
dishwasher.
•Do not operate the dishwasher without the door
completely closed and all enclosure panels
properly in place.
•Many surfaces within the dishwasher can
achieve high temperatures. Do not touch
interior surfaces or items inside the dishwasher
during or immediately after use. Exercise
caution when opening the door. Let hot air and
steam escape before looking or reaching inside.
• During loading, insert all sharp or pointed
objects with the handles up. Locate these items
where they will not damage the door seal or
cause personal injury.
•To avoid damage to the racks, do not let sharp
edges come into contact with them.
•Under certain conditions hydrogen gas may be
produced in a hot water system that has not
been used for two weeks or more. Hydrogen
gas is explosive. If the hot water system has
not been used for a period of time, turn on all
hot water faucets and let the water flow for
several minutes to release any accumulated
hydrogen gas. Do not smoke or use an open
flame during this process.
•To prevent household mold and mildew
damage, periodically check the inlet and drain
hoses for leaks.
2_mCD_
Product Dimensions Product tolerances: +1/16" (+1.6 mm)
24" (61.0 cm)-_
I I @®
Front
34 3/8"
(87.4 cm)
to
36 1/2"
(92.7 cm)
_r
m
Shipping weight: 108 Ibs. (49 Kg)
Depth with door open
49 3/4" (126.4 cm) _,
Depth with door closed
23 3/4" (60.3 cm)*-_l
i,,__ Drain hose _]__-
iJ ,, Side I D°eP_ sd mebsa°_s _u°it
F --5 1/4,,(13.5 cm)to LI I
_, 7 1/4 (18.5 cm)
-_ 1_-2 (50.0 cm)
* 23 1/2" (59.7 cm) to front panel trim edge
Do not modify
Drain hose Back /]
54" (137 cm) long // I
_// / / |I Power cord
Watersupplyline _ __ it t
60"(1520m) long,__=___._-3 _ ' J_ j'_' --_'
1,,cm,-,.,70cm,
Utility Connection Dimensions
_mCD_ 3
WARNING I
Observe all governing c0des and ordinances during
planning anti installa{ionl Contact Y0ur local building
department for further information.
Electrical Specifications
WARNING
Electrical and grounding connections mus t comply
with the applicable portions of the national electrical
code and/or other local electrical codes. ....
The dishwasher comes with an electrical cord with a
three prong grounding plug for
120 volts, 15 amp supplied.
This cord should be plugged
only into a 120 volt, three
prong, grounding electrical
outlet located to either side of
the dishwasher cutout.
If the cord is not long enough, or if a hard-wire
installation is needed, follow instructions on page 9.
Electrical Requirements
Electrical Circuit 15 Amp. 120 Vac, 60 Hz.
Requirements dedicated, grounded, circuit.
Total Connected Load 11 Amp. @ 120 Vac, 60 Hz.*
* For reference only. For exact specifications see the
product data label, located inside the right door jamb.
Grounding Instructions for a Cord-
Connected Appliance
This appliance must be grounded. In the event of
a malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least
resistance for electric current. This appliance is
equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed
and grounded in accordance with all local codes and
ordinances.
WARNING
• Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician or service representative if you are
in doubt whether the appliance is properly
grounded. Do not modify the plug prov ded wth
the appliance, if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
• Do not use an extension cord for this
appliance.
Grounding Instructions for a
Permanently-Connected Appliance
This unit must be grounded to operate properly. It
must be connected to a grounded metal, permanent
wiring system, or an equipment-grounding conductor
must be run with the circuit conductors and
connected to the equipment-grounding terminal or
lead of the appliance.
Damage to the dishwasher could occur if it is not
properly grounded.
A three conductor electrical cable or conduit meeting
local codes and ordinances is required. A UL listed
strain relief is required if nonmetalic cable is used.
Suggested color coding: Black, white and green.
Circuit Requirements
The wiring from the electrical outlet or junction box
shall be connected to a circuit protected by a 15
Amp. circuit breaker or time delay fuse, installed by a
licensed electrician.
Water Supply Specifications
• The dishwasher can be connected to a cold
or hot water supply (maximum 140°F, 60°C).
However, Dacor recommends connection to
a cold water supply. If a cold water supply is
used, the washing times will be longer but the
performance will not be affected.
• The water supply pressure must be between 4.2
and 125 p.s.i. (30 - 862 kPa). The water supply
line and the shut-off valve must supply a flow
volume of at least 3 gallons (12 liters) per minute.
• Install a 3/8" water supply valve for connection to
the dishwasher's water supply line in a location
where it is easily accessible after the dishwasher
is installed.
• The dishwasher water supply line is equipped
with a 3/8" (10 mm) NPT female compression
fitting on the end.
4_mCD_
Preparing the Location
WARNING
Follow all cabinet dimensions shown to insure safe
operation. All minimum product dimensions must be
et or exceeded (see page 3)! Dimensions shown
provide the required clearances.
• The cabinet must enclose the dishwasher on the
top, back and both sides.
• Carefully check the location where the
dishwasher is to be installed. Put it in a location
with convenient access, close to the kitchen
sink for easy water supply and drain connection.
The electrical outlet or junction box must meet
the Electrical Specifications on page 4. The
electrical service must also be installed close by
in a cabinet adjacent to the location selected so
that the power cable can be disconnected without
removing the appliance from the cutout.
• The opening through the partition between the
water supply valve/electrical service location and
the dishwasher cabinet cutout shall be located
near the floor and shall be large enough for
the water supply line and power plug to pass
through. The longest dimension of the opening
shall not be more than 1 ½" (3.8 cm). If the
partition is wood, the edges of the opening shall
be smooth and rounded. If the partition is metal,
the edges of the opening shall be covered with
an edge protector. Call Dacor for the part number
of an approved edge protector.
• The opening (A) through the partition between
the drain connection and the dishwasher cutout
must be higher than the disposer or waste tee
connection (see page 6) and lower than 30" (76
cm). If the partition is wood, the edges of the
opening shall be smooth and rounded. If the
partition is metal, the edges of the opening shall
be covered with an edge protector.
• Plan the installation so that the appliance can be
removed easily if service is required.
• If the dishwasher is installed in a corner, there
must be a minimum clearance of 2" (5.1 cm) from
the side wall so the door can open. See diagram,
right.
• The floor must be solid, level and all cutout
surfaces must be at right angles. In the interest
of safety, the surrounding cabinet must have
sufficient material for attachment of the anti-tip
brackets (reference page 13).
Cutout tolerances: +1/16",-0, (+1.6 mm,-0)
A
hole 2" x 2"
5.1 cm x 5.1 cm
Power cable/water
supply access hole(s)
1 ½"xl ½"Max.
(3.8 cm x 3.8 cm)
23 5/8"
(60.0 cm)
34" 1/2
(87.6 cm)
to
36" 1/2
(92.7 cm)
\\
24" (61.0 cm)
Dishwasher Cutout - Front View
2" (5.1 cm) Min.
clearance
Minimum Door Clearance
m
m
_mCD_ 5
Preparing the Drain
[_] CAUTION
Keep the factory installed high Io0P drain hose in
place to ensure proper dishwasher 0peration. Do
not modifY or move the mounting bracket in any
manner. If it is necessary to lengthen the hose,
install an aftermarket drain extension kit available
at most home improvement stores.
IMPORTANT: Should a drain hose longer than the
one provided be required, use a hose extension
approved for detergents and high temperature water.
The drain hose supplied with the dishwasher meets
an AHAM DW-1 test standard. Total drain hose length
must not exceed 14 ft. 9 in. (450 cm) in length from
the top of the drain loop on the back of the unit.
Joints and joint tubes must have a minimum inside
diameter of 5/8" (1.6 cm).
• The drain hose supplied with the dishwasher
must be connected to a minimum 1/2 in. inside
diameter drain connection.
Disposer connection
Keep higher
than disposer
connection
Disposer Installation without Air Gap
• The drain hose is
equipped with a cone-
shaped connector on
the end that is ready to
be cut to the desired drain connection size. Only
a clamp (not provided) is required. It fits drain
connections with an internal diameter of 1/2, 5/8,
23/32 and 7/8 inches (1.3, 1.6, 1.8 and 2.2 cm).
• You must install an air gap in the drain system
if required by local codes. Plan for the air
gap in the sink or countertop area adjacent to
the dishwasher. A section of drain hose (not
provided) needs to be installed from the air gap
to the waste disposer inlet or waste tee.
• If an air gap is not required, the drain hose must
be installed to a disposer inlet or waste tee above
the drain trap in the household plumbing.
• The drain connection must be a minimum of 20"
(50.8 cm) above the floor.
• No part of the drain hose can be lower than the
disposer or waste tee connection or higher than
37 ½" (95.0 cm) above the floor.
Disposer
n _ c°nnectign Ii71_ Air gap
ehsi ohos:er
II I ," 20Min. '
II/Sinktrap
_ Floor 1
Disposer Installation with Air Gap
Waste tee
_/ __TL Keephlgher
Crn ¢ Y fffll
/ l I ___1_ th_nnW_Sieotnee
Waste Tee Installation without Air Gap
_ Waste tle ii_ 4_Air gap
_ L !h!!nwhn!_l_or n
in, a F,Oi,,Fin..
Waste Tee Installation with Air Gap
6_mCD_
Verify the Package Contents
• Remove all styrofoam and plastic wrap from the
dishwasher. Be sure to remove the toe kick and
toe kick insulation from the top of the dishwasher
packaging. With the assistance of at least one
person, remove the dishwasher from the shipping
pallet. Place the unit to the side of the cabinet
opening.
• Remove the "O" ring attached to the water line
in a plastic bag. Set it aside for use during the
Water Line Connection.
Remove all of the packing materials from inside
and outside of the unit. DO NOT allow any of
the shipping materials, loose screws or plastic to
remain inside.
• Verify that all required components have been
provided. Inspect the unit for shipping damage
(including cosmetic damage). If any item is
missing or damaged, please contact the dealer
immediately. Do not install a damaged or
incomplete appliance.
Included
la
ra
II
Toe kick
Mounting hardware
(2 screws, 2 spacers, 2 plastic plugs)
Plastic feet (3)
O ring (comes attached to the water line)
Product literature
Tools required for installation
l Level
Crescent wrench
I1_ Wire strippers (permanent electrical
connections only)
_ll Flat blade screwdriver
I1_ Phillips screwdriver
E! Tape measure
Materials required for installation (not provided)
D Hose the correct size for
clamp (select clamp
the drain connection...see facing page)
Additional hose and clamps may be required for
installation of an air gap according to local code
Make sure you have everything necessary for proper
installation before proceeding.
El
n a I!1
_mCD_ 7
Installation Preparation
WARNING
•Before working on wiring for any electrical
appliance, be sure the electrical power has
been turned off at the breaker/fuse box. Place
a tag at the disconnect switch indicating that
you are working on the circuit.
• Moving this appliance requires two people.
Do not attempt to install or lift it alone.
• To prevent personal injury, wear hand
protection when moving this appliance.
• Do not allow any material, including the
hoses or electrical wiring to be directly behind
the dishwasher while pushing it into the
cutout opening. Carefully pull the slack out of
both hoses and the wiring from outside the
cutout during push back to prevent pinching.
An electric shock hazard or water damage
may result from pinched wires or hoses.
Damage due to improper installation is not
covered under warranty.
Adjust the Door Springs
Before installation, open the door to make sure it
stays open at any angle. If it tends to fall open or
pull shut on its own, adjust the springs.
The door springs are on the sides of the
dishwasher. If adjustment is necessary, try making
small adjustments on only one side first.
1. Be sure the door is closed.
2. Grab the front end of the spring and pull it
up and forward to release it from the forward
mount.
Door
spring
.
Side of Dishwasher
To make small tension adjustments to the
spring, hold the back end of the spring with
one hand and turn the front part one or more
times. Turn it clockwise to increase spring
tension, counterclockwise to reduce spring
tension.
Increase _ Decrease
spring tension spring tension
.To make larger tension adjustments to the door
springs, remove the back of the springs from the
dishwasher by turning them outwards.
Move them one hole farther back or forward, then
make small adjustments as outlined in step 3 as
necessary.
Side of Dishwasher
Increase
spring tension
Decrease
spring tension
.To reinstall the back end of the spring, hold it at
a right angle to the side of the dishwasher and
push the end into the hole, then turn the spring
in, toward the front of the dishwasher.
6. Reattach the front end of the spring by pulling it
up and forward to fasten it in the mount.
.Open the door and check the spring tension
again. If necessary, make further adjustments.
8_mCD_
Level the Dishwasher
CAUTION
A level unit is Very important to pr0pe r operation. I
Be sure to level the unit fron t t° back and side tO
s de.
The unit comes with white plastic feet for the legs to
protect the kitchen floor from being damaged when
you slide the unit into place. They snap onto the
bottom of all three legs. Install them before leveling
the appliance.
Do not attach the plastic feet if the installation space
is the minimum required height.
/\
To level the dishwasher:
.Loosen the retaining nuts on the dishwasher's
three steel feet using a crescent wrench. Turn
the nuts until they are as close to the floor as
possible.
!\
\/
2. Measure the height of the front and back of the
cutout with a tape measure.
3. Adjust the feet, until the front of the dishwasher
measures 1/8" (3 mm) shorter than the cutout
height.
4. Open the door and pull the bottom rack out of the
dishwasher. Check to make sure the dishwasher
floor is level left to right using a level. Adjust the
front legs as necessary.
5. Adjust the rear leg until the floor of the
dishwasher is level front to back.
6. Tighten the rear retaining nut, but leave the front
retaining nuts loose to allow for final leveling after
the unit is pushed into place.
Connecting the Electric Cable
Permanently Connected Appliance Only:
If the cord is not long enough, or if a hard-wire
installation is needed, follow the steps below to
complete the electrical connection. Otherwise skip
to Installing the Unit in the Cabinet. NOTE: When
doing a hard-wire installation, you must remove the
supplied power cord.
WARNING
'Before starting this p[ocedure, be sure the
power is turned off at the breaker!fuse box.
, Make sure the water supply line, dra n line and
outside of the electrical cable do not touch any
exposed terminals of the dishwasher wiring.
Remove the toe kick brackets from the front of
the electrical access panel, below the door.
Electrical
Catch access panel
.
3.
Remove the electrical access panel.
Disconnect the factory installed power cord from
the terminal block and I_
ground connection screw
inside the access panel.
Remove the cord. Terminal block location
Continued...
_mCD_ 9
Connecting the Electric Cable (Cont.)
(Permanently Connected Appliance Only)
4. If a nonmetallic cable is being used, install a
UL-listed strain relief bushing on the back of the
dishwasher.
.
.
7.
Connect the white wire on the cable to the "N"
terminal on the dishwasher terminal block as
shown below.
Connect the black wire on the cable to the "L"
terminal on the terminal block.
Connect the ground (green) wire on the cable
using a loop or spade terminal to the ground
connection screw located on the dishwasher
chassis.
JUbction k ______.]Tohouse power supply
_ _White to I
_[_ white
_[._ (neutral)
-l_Blackt°
17 J L I black(line)
G ento _
.green,, // _ block _JNeutral (N)
Ground _ ....__
connection screw /_/\ Line (L)
(chassis) _" terminal
Permanent Wiring Connection
8. Re-install the electrical access panel and the toe
kick brackets.
Installing the Unit in the Cabinet
1. Position the dishwasher in front of the cabinet
opening.
2. Before sliding the unit into the cutout, make sure
the drain hose, water supply line and power cable
are positioned in the utility cutouts as shown
below. Make sure each is routed to the side it will
be connected.
Drain hose
Water supply
line
Power
cable
WARNING
Exercise Care when installing or removing the I
dishwasher to reduce the I kelihood of damage to
the power suppy cablel
3. Slowly and gently slide the unit into the
dishwasher opening. As you do this, have
someone gently pull the drain hose, water supply
line and power cable through the access holes
into the adjacent cabinets. Exercise care to make
sure that the wiring and plumbing lines do not
become damaged.
10 dmcar
Power cable and
water supply line
4. Once the dishwasher is in place check to make
sure all slack is pulled out of the power cable,
water supply line and drain hose. Check to make
sure none of them are pinched or kinked.
NOTE: Do not attach the mounting screws until after
Verifying Operation.
Water Line Connection
CAUTION
The Unit haS a float switch in the base pan to
protect against flooding: If the inlet valve connection
is n0t seated properly, water may leak into the base
pan and activate the float switch. .................................
1. Before connecting the water supply, line make
sure the water pressure and flow rate meet the
specification on page 4.
Flush the water supply line prior to connecting it
to the dishwasher's water supply line.
Insert the provided "O" ring in the end of the
water supply line.
Make sure it is _ __
evenly seated on
the end of the
tubing.
Connect the end of the water supply line to the
water line. Tighten the connection by hand plus a
quarter turn with a crescent wrench.
.
3.
.
Drain Line Connection
CAUTION
• For proper dishwasher operation and dra nage,
the drain line must be routed through the bottom
of the cabinet and up to the drain or air gap
connection. The drain hose or air gap outlet
must connect above the sink trap.
• If required, the air gap must be installed at
countertop level.
1. If the drain will connect to a waste disposer,
see the disposer manufacturer's installation
instructions for correct drain hose mounting
techniques. Most disposers have a plug on the
drain line connection that must be removed prior
to attaching the drain line. Also, any joints must
have a minimum 5/8" (1.6 cm) inside diameter.
2. Cut the drain hose adapter
on the end of the drain
hose to the appropriate size
for the air gap, waste tee, disposer connection or
hose extension.
3. Connect the drain hose to the air gap or directly
to the waste tee or disposer above the sink trap
as shown in one of the examples on page 6.
4. Tighten the holding clamp.
5. For installations with an air gap, make sure that
the drain line between the air gap and the waste
tee or disposer is in place and that it is clamped
tightly on both ends.
6. To ensure proper operation, inspect the drain
system to make sure that:
• No part of the drain hose is higher than 35"
(88.9 cm) from the bottom of the dishwasher.
• The connection to the waste tee or disposer is
a minimum of 20" (50.8 cm) above the bottom
of the dishwasher base.
Verifying Operation
Pre-verification Check List
.
2.
3.
4.
5.
.
Confirm that the power to the dishwasher is shut
off at the circuit breaker panel.
Make sure all packing material has been
removed from inside the dishwasher.
Familiarize yourself with operation of the
dishwasher by reading the use and care manual.
Remove any protective film, if present from the
control panel, door panel, etc.
Check again that the entire length of the power
cable, water line and drain hose are free of
pinches or kinks.
Verify that the dishwasher is level front to back
and side to side inside the cutout. Re-level if
necessary before testing the unit.
Wet TestChecklist
.Turn on the water supply and wait for five
minutes. Check for plumbing leaks. Tighten
connections if necessary. NOTE: Improper
installation of the water supply line "O" ring can
cause the water line to leak at the connection.
2. Turn on power to the dishwasher at the circuit
breaker panel or fuse box. Make sure the power
cord is connected to the electrical outlet (if
applicable).
3. Test dishwasher operation by running a rinse
cycle (which takes about four minutes). See
the use and care manual for specific operating
instructions. Check to make sure that the
dishwasher takes in water and drains.
Continued...
ctacar 11
4. Check for leaks under the dishwasher and under
the sink. If any leaks are found, immediately push
the START/STOP button and disconnect power.
If there are leaks under the sink, check the water
supply and drain connections. Reconnect power
and restart the cycle. If the leak is elsewhere,
and a hose extension is installed, check for
a loose connection. If the leak is under the
dishwasher itself, disconnect power and contact
Dacor Distinctive Service (see inside cover of
these instructions).
5. If the dishwasher functions normally, complete
the installation as instructed on the following
sections.
If the dishwasher fails to operate
properly:
• Verify that power is supplied to the dishwasher.
• Check all plumbing connections.
• Check for kinks in the water supply line and the
drain hose.
Repeat the Wet Test Checklist.
If the appliance still does not work, contact Dacor
Distinctive Service at (877) 337-3226. Do not
attempt to repair the appliance yourself. If you
need service, be sure to have the model and
serial numbers available when you call. See the
inside cover for location.
Dacor is not responsible for the cost of correcting
problems caused by a faulty installation.
Final Leveling
1. Check to make sure that adjacent drawers and
cupboards can be opened when the dishwasher
door is open. Reposition the dishwasher if
necessary.
2. Check that there is a 1/8" (3 mm) space between
the top of the dishwasher door and the underside
of the cabinet.
-- 1/8" (3 mm)
i
i
i
i
3. If necessary adjust the front leveling legs until
the dishwasher is the correct height. Use a
screwdriver to adjust the rear leg adjustment
screw. Both front legs must contact the floor
solidly.
4. Check to make sure the unit is level side to
side and front to back. Also check to make sure
both front legs are contacting the floor securely.
Readjust the leveling legs as necessary. NOTE:
The unit may have an inclination of 3/16" (5 mm)
maximum without affecting performance.
5. Once level, hand tighten the front leg retaining
nuts into place. Tighten them into place using a
crescent wrench.
12 =Imcar_
Attaching the Anti-tip
Brackets
CAUTION I
Make sure to anch0r on e anti tip bracket 0n each
side of the dishwasher. ........... J
1. The anti-tip brackets protect against possible
tipping caused by heavy bottom rack loads on
the door. Use only the stainless steel screws
provided with the machine.
2. Open the door and remove the top rack. Pull the
rack out. Turn both rack stops outwards on the
rack mounting rails (see diagram). Pull the rack
toward you to remove.
_Rack stop
.Cover the screw holes on the sides with the
supplied plastic plugs. Push in the plugs
diagonally to fit them in place.
6. Replace the top rack.
Installing the Toe Kick
1. Attach the supplied sound insulation material to
the back of the toe kick.
Insulation
t
Toe kick
3. The anti-tip brackets may be secured either
through the top or the sides. Installations
with a hard material (like granite) may require
attachment through the sides.
4. When installing the screws, place the included
spacer over the screw. Insert the screws into the
holes in the anti-tip brackets through the access
holes in the top or sides of the door jamb as
shown below. Tighten the screws in place.
Screw
Attachment methods
bracket
I r
or
II
Access
Spacer hole
.
.
Loosen the brackets for the toe kick by moving
the gray catches toward the center of the
dishwasher.
Adjust the brackets (pull out or push in) until they
are flush with the kitchen toe kick on both sides
as shown below.
Catch
°0
4. Lock the
brackets in place
by pushing both
catches into ---_
the appropriate _0
notch in the
holder.
Continued...
ctacar 13
.Hang the toe kick on the brackets as shown.
Check to make sure that the toe kick is even with
the kitchen cabinet toe kick. If necessary, remove
the toe kick and readjust the brackets.
Installation Checklist
WARNING
• To ensure a safe and proper installation, the
following checklist should be completed by the
installer to ensure that no part of the installation
has been overlooked and the unit is working
properly .....
° Proper installation is the responsibility of
the homeowner. The importance of proper
installation of your Dacor dishwasher cannot be
overemphasized.
[]
[]
Has the unit been inspected for cosmetic
damage?
Has all packaging and literature been removed
from the dishwasher?
[]
[]
[]
[]
[]
[]
[]
[]
Is the power cable connected to a three prong
grounded electrical outlet or grounded junction
box that meets the electrical specifications?
Has the "O" ring been installed on the water
supply line?
Have the water supply line and the drain
hose been properly installed according to
specifications?
Has the unit been properly leveled?
Has the unit been attached to the surrounding
cabinets using the anti-tip brackets?
Has proper operation been verified?
Have the water supply line and the drain hose
been properly installed and checked for leaks?
Has the warranty been activated on line or the
warranty card filled out and mailed?
14 _acar
clmcar 15
16 _mcar
ItemNo.,8088919Rev.04 TheLifeoftheKitchen?
Dacor • 600 Anton Blvd. Suite 1000 Costa Mesa, CA 92626 • Phone: (800) 793-0093 • Fax: (626)403-3130 • www.Dacor.com
