Datalogic S r l FX4WB Rugged Mobile Computer with 1D/2D Imager User Manual 852001210

Download:
Mirror Download [FCC.gov]
Document ID	3768883
Application ID	HLRDhKzVrmh6ke9CwoI5Mg==
Document Description	Users Manual - Notices
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	117.24kB (1465485 bits)
Date Submitted	2018-03-05 00:00:00
Date Available	2018-03-16 00:00:00
Creation Date	2016-02-19 09:41:20
Producing Software	Acrobat Distiller 18.0 (Windows)
Document Lastmod	2018-01-12 16:33:02
Document Title	852001210.fm
Document Creator	FrameMaker 2017
Document Author:	Mariella Pichi

Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax +39 051 3147205
Read carefully the Falcon X4 user manual (available at www.datalogic.com) before performing
any type of connection to the Falcon X4.
The user is responsible for any damage caused by incorrect use of the equipment or by
inobservance of the indication supplied in the user manual.
NOTE
WARNING
General Safety Rules
•
•
©2017-2018 Datalogic S.p.A. and/or its affiliates
 All rights reserved.  Without limiting the rights under copyright, no part of this documentation may be reproduced,
stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without
the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted
a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in
this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future
revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative.
Electronic versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or suggestions about this or other
Datalogic publications, please let us know via the "Contact Datalogic" page.
Rugged Mobile Computer with 1D/2D Imager
•
CAUTION
•
•
•
•
Before using the devices and the battery packs, read this Addendum carefully.
Use only the components and accessories supplied by the manufacturer for
the specific Falcon X4 being used.
Do not attempt to disassemble the Falcon X4 device, as it does not contain
parts that can be repaired by the user. Any tampering will invalidate the
warranty.
When replacing the battery pack or at the end of the operative life of the
Falcon X4 device, disposal must be performed in compliance with the laws in
force in your jurisdiction.
Do not submerge the Falcon X4 in liquid products.
For further information or support, refer to the Datalogic web site:
www.datalogic.com.
Power Supply
The device is intended to be supplied by a self-contained rechargeable Lithium Ion battery pack
(UL listed LPS/SELV power source) and/or by UL Listed/CSA Certified Power Unit LPS/SELV
power source which supplies power directly to the unit via the micro USB connector of the cable.
The device could be also used with Certified Accessories (Dock/Cradle). The Dock/Cradle
accessories are intended to be supplied by a UL Listed/CSA Certified Power Unit LPS/SELV which
supplies power via the power connector of the cable.
Any changes or modifications to equipment, not expressly approved by Datalogic could void the
user's authority to operate the equipment.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however,
Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo
are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.
Falcon and the Falcon logo are trademarks of Datalogic S.p.A. and/or its affiliates, registered in many countries including
the U.S.A. and the E.U. All other brand and product names may be trademarks of their respective owners.
Wireless and Radio Frequencies Warnings
WARNING
Patents
Battery Information
See www.patents.datalogic.com for patent list.
Falcon X4 - 2D Imager
This product is covered by one or more of the following patents:
Design patents: AU329643, EP001180673, EP002421560, USD622726, USD737822, USD779491, ZL200930383849.1,
ZL201430286638.7
Utility patents: EP0999514B1, EP0996284B1, EP1128315B1, EP1172756B1, EP1396811B1, EP1413971B1, EP1804089B1,
EP2315156B1, EP2517148B1, EP2649555B1, IT1396943, JP4435343B2, JP5192390B2, US6412698, US6415978,
US6512218, US6808114, US6877664, US6997385, US7053954, US7234641, US7387246, US8113430, US8888003,
US8915443, ZL200680050007.8, ZL200980163411.X.
Falcon X4 - 1D Imager
This product is covered by one or more of the following patents:
Design patents: AU329643, EP001180673, EP002696088, USD622726, ZL200930383849.1, ZL201530439997.6
Utility patents: EP1128315B1, EP1396811B1, EP1413971B1, EP1797521B1, EP2517148B1, EP2649555B1, IT1396943,
US6098883, US6412698, US6415978, US6808114, US6997385, US7387246, US7506816, US8888003, US8915443,
ZL200980163411.X.
Do not incinerate, disassemble, short terminals, or expose to high temperature. Risk of fire and
explosion. Use specified charger only. Risk of explosion if the battery is replaced by an incorrect
type. Dispose of batteries as required by local authorities.
CAUTION
Safety & Regulatory Addendum
852001210
(Rev. A)
January 2018
Cleaning The Device
Periodically clean the Falcon X4 device using a soft cloth slightly dampened with only water or Isopropyl Alcohol (70%).
Do not use any other cleaning agents (e.g. different alcohol, abrasive or corrosive products, solvents) or abrasive pads to
clean the device.
By default, the main battery pack is disconnected at the factory to avoid damage due to
excessive draining.
The rechargeable battery pack is less than half of full charge when delivered. Charge the battery
pack as indicated in the Quick Start Guide or in the User Manual, before using the Falcon X4
terminal.
The battery pack autonomy varies according to many factors, such as the frequency of barcode
scanning, RF usage, battery life, storage, environmental conditions, etc.
Close to the limits of the working temperature, some battery performance degradation may
occur.
The Falcon X4 should be charged at an ambient temperature between 0 - 35º C (32 to 95 ºF) to
achieve the maximum charging rate.
Never charge the device battery in a closed space where excessive heat can build up.
As a safety precaution, the battery may stop charging to avoid overheating.
The Falcon X4 may get warm during charging; this is normal and does not mean a malfunction.
Even if the storage temperature range is wider, it is recommended to store the terminal and the
batteries at environmental temperature, in order to achieve the longest battery life.
Waste Electrical and Electronic Equipment (WEEE)
This document is an addendum to the Quick
Start Guide (QSG) for this product. See the QSG
for additional product information.
CAUTION
WARNING
Avoid storing batteries for long periods in a state of full charge or very low charge.
We recommend charging the battery pack every two to three months to keep its charge at a
moderate level to maximize battery life.
Annual replacement of rechargeable battery pack avoids possible risks or abnormalities and
ensures maximum performance.
Use only Datalogic approved batteries and accessories for battery charging.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect.
Mettre au rebut les batteris usagées confor mément aux instructions.
In case of leakage of liquid from the battery, avoid contact with liquid the skin or eyes. If the
contact occurs, immediately wash the affected area with water and consult a doctor.
Do not solder directly onto the battery pack.
Do not expose the battery pack to liquids.
Avoid any knocks or excessive vibrations. If the device or the battery is dropped, especially on
a hard surface, you should take it to the nearest Authorised Repair Centre for inspection
before continuing to use it.
If your device stops working for any reason, do not use its battery on other electronic devices
without a prior check and approval by an Authorised Repair Centre.
Do not replace the battery pack when the device is turned on.
Do not remove or damage the battery pack’s label.
Do not use the battery pack if it is damaged in any part.
Battery pack usage by children should be supervised.
Collect and recycle waste batteries separately from the device in compliance with European
Directive 2006/66/EC, 2011/65, 2002/96/EC and subsequent modifications, with US and
China regulatory laws and regulations about the environment.
Use only the supplied or an approved replacement antenna. Unauthorized antennas,
modifications or attachments could damage the product and may violate laws and
regulations.
Most modern electronic equipment is shielded from RF signals. However, certain electronic
equipment may not be shielded against the RF signals generated by Falcon X4.
Datalogic recommends persons with pacemakers or other medical devices to follow the same
recommendations provided by Health Industry Manufacturers Associations for mobile
phones.
Persons with pacemakers:
•
Should ALWAYS keep this device more than twenty five (25) cm from their
pacemaker and/or any other medical device;
•
Should not carry this device in a breast pocket;
•
Should keep the device at the opposite side of the pacemaker and/or any other
medical device;
•
Should turn this device OFF or move it immediately AWAY if there is any
reason to suspect that interference is taking place.
•
Should ALWAYS read pacemaker or any other medical device guides or should
consult the manufacturer of the medical device to determine if it is adequately
shielded from external RF energy.
In case of doubt concerning the use of wireless devices with an implanted medical device,
contact your doctor.
Turn this device OFF in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may use equipment that could be
sensitive to external RF energy.
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has been added to your vehicle.
An air bag inflates with great force. DO NOT place objects, including either installed or portable
wireless equipment, in the area over the air bag or in the air bag deployment area. If a
vehicle’s wireless equipment is improperly installed and the air bag inflates, serious injury
could result.
Turn off the device when in any area with a potentially explosive atmosphere. Observe
restrictions and follow closely any laws, regulations, warnings and best practices on the use
of radio equipment near fuel storage areas or fuel distribution areas, chemical plants or where
any operation involves use of explosive materials.
Do not store or carry flammable liquids, explosive gases or materials with the device or its
parts or accessories.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked or
shown.
Sparks in such areas could cause an explosion or fire, resulting in injury or even death.
Laser Safety
The following information applies to Laser Aiming System, used on Falcon X4 variants with 2D
imager.
The laser light is visible to the human eye and is emitted from the window indicated in the figure
below.
LASER LIGHT - DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX OUTPUT RADIATION 1 mW
COMPLIANT WITH EN 60825-1 (2007) and EN 60825-1 (2014)
Information for the User
At the end of its useful life, the product marked with the crossed out wheeled wastebin must be disposed of separately
from urban waste.
For more detailed information about disposal, contact the supplier that provided you with the product in question or
consult the dedicated section at the website http://www.datalogic.com.
Informazione per gli utenti
L’apparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della sua vita utile,
separatamente dai rifiuti urbani.
Per maggiori dettagli sulle modalità di smaltimento, contattare il Fornitore dal quale è stata acquistata l’apparecchiatura
o consultare la sezione dedicata sul sito http://www.datalogic.com.
Battery Safety Guidelines
©2017-2018 Datalogic S.p.A. and/or its affiliates. All
rights reserved. Datalogic and the Datalogic logo are
registered trademarks of Datalogic S.p.A. in many
countries, including the U.S. and the E.U.
WARNING
Information aux utilisateurs
Au terme de sa vie utile, le produit qui porte le symbole d'un caisson à ordures barré ne doit pas être éliminé avec les
déchets urbains.
Pour obtenir des informations complémentaires concernant l'élimination, veuillez contacter le fournisseur auprès duquel
vous avez acheté le produit ou consulter la section consacrée au site web http://www.datalogic.com.
Benutzerinformation bezüglich
Am Ende des Gerätelebenszyklus darf das Produkt nicht über den städtischen Hausmüll entsorgt werden. Eine
entsprechende Mülltrennung ist erforderlich.
Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem Lieferanten über den sie das Produkt erworben haben,
oder besuchen sie unsere Hompage unter http://www.datalogic.com.
Información para el usuario
Al final de su vida útil, el producto marcado con un simbolo de contenedor de bassura móvil tachado no debe eliminarse
junto a los desechos urbanos.
Para obtener una información más detallada sobre la eliminación, por favor, póngase en contacto con el proveedor donde
lo compró o consultar la sección dedicada en el Web site http://www.datalogic.com.
www.datalogic.com
Installing, charging and/or any other action should be done by authorized personnel and
following this manual.
The battery pack may get hot, explode, ignite, and/or cause serious injury if exposed to
abusive conditions.
If the battery pack is replaced with an improper type, there is risk of explosion.
Do not place the battery pack in or near a fire or other heat source; do not place the battery
pack in direct sunlight, or use or store the battery pack inside unventilated areas in hot
weather; do not place the battery pack in microwave ovens, in clothes dryers, in high pressure
containers, on induction cook surfaces or similar devices. Doing so may cause the battery pack
to generate heat, explode or ignite. Using the battery pack in this manner may also result in a
loss of performance and a shortened life expectancy.
To power the cradle, use only a Datalogic approved power supply. The use of an alternative
power supply will void the product warranty, may cause product damage and may cause heat,
an explosion, or fire.
The area in which the units are charged should be clear of debris and combustible materials or
chemicals.
Do not use the battery pack of this terminal to power devices other than this device.
Immediately discontinue use of the battery pack if, while using, charging or storing the battery
pack, the battery pack emits an unusual smell, feels hot, changes colour or shape, or appears
abnormal in any other way.
Do not short-circuit the battery pack contacts connecting the positive terminal and negative
terminal. This might happen, for example, when you carry a spare battery pack in your pocket
or purse; accidental short–circuiting can occur when a metallic object such as a coin, clip, or
pen causes direct connection of the contacts of the battery pack (these look like metal strips
on the battery pack). Short–circuiting the terminals may damage the battery pack or the
connecting object.
Do not apply voltages to the battery pack contacts.
Do not pierce the battery pack with nails, strike it with a hammer, step on it or otherwise
subject it to strong impacts, pressures, or shocks.
Do not disassemble or modify (i.e. bend, crush or deform) the battery pack. The battery pack
contains safety and protection devices, which, if damaged, may cause the battery pack to
generate heat, explode or ignite.
The artwork below may be only a draft. Please refer to the label attached to the product for
information about certification marks.
NOTE
Scan Window
Printed Data Label
Laser Warning Label
Printed Data Label
Marks Label
ITALIANO
DEUTSCH
FRANÇAIS
LA LUCE LASER È VISIBILE ALL'OCCHIO DIE LASER-STRAHLUNG IST FÜR DAS LE RAYON LASER EST VISIBLE À L'OEIL
UMANO E VIENE EMESSA DALLA
MENSCHLICHE AUGE SICHTBAR UND NU ET IL EST ÉMIS PAR LA FENÊTRE
FINESTRA INDICATA NELLA FIGURA. WIRD AM STRAHLAUS TRITTSFENSTER DÉSIGNÉE SUR L'ILLUSTRATION DANS
AUSGESENDET (SIEHE BILD).
LA FIGURE.
LUCE LASER NON FISSARE IL FASCIO
APPARECCHIO LASER DI CLASSE 2
MASSIMA POTENZA D'USCITA: 1 mW
LUNGHEZZA D'ONDA EMESSA: 630~680
nm
CONFORME A EN 60825-1 (2007) e EN
60825-1 (2014).
ESPAÑOL
A LUZ LÁSER ES VISIBLE AL OJO
HUMANO Y ES EMITIDA POR LA
VENTANA INDICADA EN LA FIGURA.
LASERSTRAHLUNG NICHT IN DEN RAYON LASER EVITER DE REGARDER LE RAYO LÁSER NO MIRAR FIJO EL RAYO
STRAHL BLICKEN PRODUKT DER
RAYON APPAREIL LASER DE CLASSE 2 APARATO LÁSER DE CLASE 2 MÁXIMA
LASERKLASSE 2 MAXIMALE
PUISSANCE DE SORTIE: 1 mW
POTENCIA DE SALIDA: 1 mW
AUSGANGSLEISTUNG: 1 mW
LONGUEUR D'ONDE EMISE: 630~680 nm
LONGITUD DE ONDA EMITIDA:
WELLENLÄGE: 630~680 nm
CONFORME A EN 60825-1 (2007) et EN
630~680 nm
ENTSPR. EN 60825-1 (2007) und EN
60825-1 (2014).
CONFORME A EN 60825-1 (2007) y EN
60825-1 (2014).
60825-1 (2014).
El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos humanos a consecuencia de una exposición de
corta duración. Eviten de mirar fijo el rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por ejemplo el sol.
Además, eviten de dirigir el rayo láser hacia los ojos de un observador, también a través de superficies reflectantes como los espejos.
WARNING
Do not attempt to open or otherwise service any components in the optics cavity. Opening or servicing any part of the optics cavity by
unauthorized personnel may violate laser safety regulations. The optics system is a factory only repair item.
Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous
visible laser light.
Use of optical systems with the scanner will increase eye hazard. Optical instruments include binoculars, microscopes, eye glasses and
magnifying glasses.
The product utilizes a low-power laser diode. Although staring directly at the laser beam momentarily causes no known biological
damage, avoid staring at the beam as one would with any very strong light source, such as the sun. Avoid that the laser beam hits the
eye of an observer, even through reflective surfaces such as mirrors, etc.
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e si riferiscono all’uso corretto del terminale.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data di produzione: CDRH 21 CFR 1040 e EN 608251.
Non si rende mai necessario aprire l’apparecchio per motivi di installazione, utilizzo o manutenzione.
ATTENZIONE
Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni riportati dall’occhio umano in seguito ad una
esposizione di breve durata, evitare di fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità intensa, ad
esempio il sole. Evitare inoltre di dirigere il raggio laser negli occhi di un osservatore, anche attraverso superfici riflettenti come gli
specchi.
DEUTSCH
Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von internationalen Behörden auferlegt wurden,
und sie beziehen sich auf den korrekten Gebrauch vom Terminal.
NORM FÜR DIE LASERSICHERHEIT
Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH 21 CFR 1040 Normen für die Lasersicherheit.
Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations- und Wartungs-Arbeiten zu öffnen.
Marking and European Economic Area (EEA)
In radio systems configured with mobile computers and access points, the frequencies to be used must be allowed by the spectrum
authorities of the specific country in which the installation takes place. Be absolutely sure that the system frequencies are correctly
set to be compliant with the spectrum requirements of the country.
The Radio modules used in this product automatically adapt to the frequencies set by the system and do not require any parameter
settings.
Hereby, Datalogic S.r.l. declares that the radio equipment type Falcon X4 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet address: www.datalogic.com.
Statement of compliance
Česky [Czech]
Datalogic S.r.l. tímto prohlašuje, že tento Falcon X4 je ve shodě se základními požadavky a dalšími příslušnými ustanoveními
směrnice 2014/53/EU - 2011/65/EU.
Dansk [Danish]
Undertegnede Datalogic S.r.l. erklærer herved, at følgende udstyr Falcon X4 overholder de væsentlige krav og øvrige relevante krav i
direktiv 2014/53/EU - 2011/65/EU.
Deutsch [German]
Hiermit erklärt Datalogic S.r.l., dass sich das Gerät Falcon X4 in Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 2014/53/EU - 2011/65/EU befindet.
ACHTUNG
Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von kurzen Einstrahlungen bekannt sind, sollten Sie es
vermeiden für längere Zeit in den Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne). Vermeiden Sie
es, den Laserstrahl weder gegen die Augen eines Beobachters, noch gegen reflektierende Oberflächen zu richten.
FRANÇAIS
Les informations suivantes sont fournies selon les règles fixées par les autorités internationales et se réfèrent à une correcte
utilisation du terminal.
NORMES DE SECURITE LASER
Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de fabrication: CDRH 21 CFR 1040 et EN 60825-1.
Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.
ATTENTION
LNe pas essayer d’ouvrir ou de réparer les composants de la cavité optique. L’ouverture de la cavité optique ou la réparation de ses
composants par une personne non qualifiée peut entraîner le nonrespect des règles de sécurité relatives au laser. Le système optique ne
peut être réparé qu’en usine.
L'utilisation de procédures ou réglages différents de ceux donnés ici peut entraîner une dangereuse exposition à lumière laser visible.
L’utilisation d’instruments optiques avec le scanneur augmente le danger pour les yeux. Les instruments optiques comprennent les
jumelles, les microscopes, les lunettes et les verres grossissants.
Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été constaté à la suite d’une exposition au rayon laser.
Eviter de regarder fixement le rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi de diriger le rayon
vers les yeux d’un observateur, même à travers des surfaces réfléchissantes (miroirs, par exemple).
ESPAÑOL
Las informaciones siguientes son presentadas en conformidad con las disposiciones de las autoridades internacionales y se refieren
al uso correcto del terminal.
NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER
Este aparato resulta conforme a las normativas vigentes de seguridad láser a la fecha de producción: CDRH 21 CFR 1040 y EN 608251.
No es necesario abrir el aparato para la instalación, la utilización o la manutención.
ATENCIÓN
No intente abrir o de ninguna manera dar servicio a ninguno de los componentes del receptáculo óptico. Abrir o dar servicio a las piezas del
receptáculo óptico por parte del personal no autorizado podría ser una violación a los reglamentos de seguridad. El sistema óptico se
puede reparar en la fábrica solamente.
La utilización de procedimientos o regulaciones diferentes de aquellas describidas en la documentación puede causar una exposición
peligrosa a la luz láser visible.
El uso de sistemas ópticos con el escáner aumentará el riesgo de daños oculares. Los instrumentos ópticos incluyen binoculares,
microscopios, lentes y lupas.
FCC Compliance
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
NOTICE:
This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.
Changes or modifications made to this equipment not expressly approved by Datalogic S.r.l. may void the FCC authorization to
operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Eesti [Estonian]
Käesolevaga kinnitab Datalogic S.r.l. seadme Falcon X4 vastavust direktiivi 2014/53/EU - 2011/65/EU põhinõuetele ja nimetatud
direktiivist tulenevatele teistele asjakohastele sätetele.
ISED Compliance
Español [Spanish]
NOTICE:
Por medio de la presente Datalogic S.r.l. declara que el Falcon X4 cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 2014/53/EU - 2011/65/EU.
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Datalogic S.r.l. ΔΗΛΩΝΕΙ ΟΤΙ Falcon X4 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ
ΤΗΣ ΟΔΗΓΙΑΣ 2014/53/EU - 2011/65/EU.
Par la présente Datalogic S.r.l. déclare que l'appareil Falcon X4 est conforme aux exigences essentielles et aux autres dispositions
pertinentes de la directive 2014/53/EU - 2011/65/EU.
Italiano [Italian]
Con la presente Datalogic S.r.l. dichiara che questo Falcon X4 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 2014/53/EU - 2011/65/EU.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement.
CAUTION
Ar šo Datalogic S.r.l. deklarē, ka Falcon X4 atbilst Direktīvas 2014/53/EU - 2011/65/EU būtiskajām prasībām un citiem ar to
saistītajiem noteikumiem.
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems;
(ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350MHz and 5650-5850 MHz and that
these radars could cause interference and/or damage to LE-LAN devices.
Lietuvių [Lithuanian]
AVERTISSEMENT:
Latviski [Latvian]
Šiuo Datalogic S.r.l. deklaruoja, kad šis Falcon X4 atitinka esminius reikalavimus ir kitas 2014/53/EU - 2011/65/EU Direktyvos
nuostatas.
Nederlands [Dutch]
Hierbij verklaart Datalogic S.r.l. dat het toestel Falcon X4 in overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 2014/53/EU - 2011/65/EU.
Malti [Maltese]
Hawnhekk, Datalogic S.r.l., jiddikjara li dan Falcon X4 jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li
hemm fid-Dirrettiva 2014/53/EU - 2011/65/EU.
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de
réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5
250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
Radiofrequency Radiation Exposure Information
Alulírott, Datalogic S.r.l. nyilatkozom, hogy a Falcon X4 megfelel a vonatkozó alapvetõ követelményeknek és az 2014/53/EU - 2011/
65/EU irányelv egyéb elõírásainak.
This device was tested for handheld and body-worn conditions, according to international Standards covering human exposure to
electromagnetic fields from radio devices.
More information about the relevant Standards for SAR measurement methods and procedures may be found in the CE DoC
included in the product user manual available at www.datalogic.com website and at the FCC public listing www.fcc.gov under the
FCC IDs specified in the FCC/IC labeling section.
Polski [Polish]
Europe
Magyar [Hungarian]
Unter keinen Umständen darf versucht werden, die Komponenten im Optikhohlraum zu öffnen oder auf irgendwelche andere Weise zu
warten. Das Öffnen bzw. Warten der Komponenten im Optikhohlraum durch unbefugtes Personal verstößt gegen die LaserSicherheitsbestimmungen. Das Optiksystem darf nur werkseitig repariert werden.
Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht in dieser Betriebsanleitung beschrieben werden, können ein gefährliches
Laserlicht verursachen.
Die Verwendung von Optiksystemen mit diesem Scanner erhöht die Gefahr einer Augenbeschädigung. Zu optischen Instrumenten gehören
unter anderem Ferngläser, Mikroskope, Brillen und Vergrößerungsgläser.
Pistol Grip variants
LED illuminators integrated in the 1D and 2D imager are classified as "EXEMPT RISK GROUP" according to IEC62471.
Français [French]
Non tentare di accedere allo scomparto contenete i componenti ottici o di farne la manutenzione.
L’apertura dello scomparto, o la manutenzione di qualsiasi parte ottica da parte di personale non autorizzato, potrebbe violare le norme
della sicurezza. Il sistema ottico può essere riparato solamente alla fabbrica.
L'utilizzo di procedure o regolazioni differenti da quelle descritte nella documentazione può provocare un'esposizione pericolosa a luce
laser visibile.
L’uso di strumenti ottici assieme allo scanner può aumentare il pericolo di danno agli occhi. Tali strumenti ottici includono cannocchiali,
microscopi, occhiali e lenti di ingrandimento.
Handheld variants
LED Class
Simplified EU Declaration of Conformity
ENGLISH
The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of
your device.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN 60825-1 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
FCC/IC Labeling
Niniejszym Datalogic S.r.l. oświadcza, że Falcon X4 jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 2014/53/EU - 2011/65/EU.
Português [Portuguese]
Datalogic S.r.l. declara que este Falcon X4 está conforme com os requisitos essenciais e outras disposições da Directiva 2014/53/EU
- 2011/65/EU.
Slovensko [Slovenian]
Datalogic S.r.l. izjavlja, da je ta Falcon X4 v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 2014/53/EU 2011/65/EU.
Slovensky [Slovak]
Datalogic S.r.l. týmto vyhlasuje, že Falcon X4 spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 2014/53/EU 2011/65/EU.
This device is compliant with SAR limits for general population/uncontrolled exposure specified in Council Recommendation 1999/
519/EC Annex II.
US and Canada
For body worn operation, this device has been tested and meets the FCC/ISED RF exposure guidelines for use with an accessory that
contains no metal and the positions the handset a minimum of 0 cm from the body. Use of other enhancements may not ensure
compliance with FCC/ISED RF exposure guidelines.
Cet équipement peut être installé et utilisé à une distance minimale de 0 cm entre le radiateur et votre corps.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter,
expect those approved under the filing.
Suomi [Finnish]
Radio Technologies and Frequency Bands
Datalogic S.r.l. vakuuttaa täten että Falcon X4 tyyppinen laite on direktiivin 2014/53/EU - 2011/65/EU oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
Falcon X4 incorporates the following radio technologies and supports the corresponding Frequencies and Radio-Frequency
transmitted power, as specified below:
Svenska [Swedish]
Härmed intygar Datalogic S.r.l. att denna Falcon X4 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta
bestämmelser som framgår av direktiv 2014/53/EU - 2011/65/EU.
Radio Technology
Frequency Bands
WLAN IEEE 802.11b/g/n
2.4GHz Frequency Bands:
Information for the User
• SISO 20MHz channels bandwidth (HT-20)
2.412 – 2.462 MHz
Restrictions of use in all EU Countries. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.
• MIMO support 20MHz channels bandwidth (HT-20)
WLAN IEEE 802.11a/n
5GHz Frequency Bands:
• SISO 20MHz and 40Mhz channels bandwidth (HT-20 and HT-40)
5.180 – 5.240 MHz
5.260 – 5.320 MHz
5.500 – 5.700 MHz
5.735 – 5.825 MHz
Bluetooth® V4.0 – EDR/LE
2402-2480Mhz

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : Mariella Pichi
Title                           : 852001210.fm
Create Date                     : 2016:02:19 09:41:20Z
Creator Tool                    : FrameMaker 2017
Modify Date                     : 2018:01:12 16:33:02+01:00
Metadata Date                   : 2018:01:12 16:33:02+01:00
Producer                        : Acrobat Distiller 18.0 (Windows)
Document ID                     : uuid:7d3cc088-dedd-4285-ae4b-674222560de2
Instance ID                     : uuid:d0d484ce-0b0b-415d-b423-5b95f88ef98a
Page Layout                     : SinglePage
Page Mode                       : UseNone
Page Count                      : 2
Author                          : Mariella Pichi

EXIF Metadata provided by EXIF.tools