Denso Wave orporated DWBT001 Bluetooth Module User Manual Installation Manual
Denso Wave Incorporated Bluetooth Module Installation Manual
Contents
- 1. Installation manual
- 2. Regulatory manual insert
- 3. Sample user manual
Installation manual
Installation Description
DWBT001 shall be installed in the Bar-code Handy Terminal as shown in Fig. 1.
When DWBT001 is installed in the Bar-code Handy Terminal, we as OEM shall consider the following
points;
1. Since DWBT001 owns its FCC ID number, we shall affix an exterior label on the outside of
the Bar-code Handy Terminal if the FCC ID is not visible. The exterior label shall use
wording such as either “Contains FCC IC : PZWDWBT001”.
2. DWBT001 complies with requirements of sub-sections 15.203, 15.205, 15.209 and 15.247
in FCC Rules Part 15. We shall install DWBT001 in accordance with their requirements.
3. DWBT001 complies with requirements of the sub-section 2.1091. When installers install
DWBT001 into the Bar-code Handy Terminal, they shall ensure that the public is not
exposed to radio frequency energy levels in excess of the Commission’s guidelines in
accordance with the sub-section 15.247(b)(4) in FCC Rules Part 15.
(1) Assembling Bluetooth Board to holder.
(2) Assembling Bluetooth Board assembled holder in Lower Case of Bar-code Handy Terminal.
DWBT001
(3) Assembling main circuit board, bar-code scanning module and LCD on lower case of Bar-code
Handy Terminal.
DWBT001
(4) Assembling Upper Case