Digital Control FX FX User Manual

Digital Control Inc FX Operating Instructions

a href="https://usermanual.wiki/Digital-Control" itemprop="url"> Digital Control >

User Manual

                   Directional Drilling Locating System  Operator’s Manual                   DIGITAL CONTROL INCORPORATED DCI Headquarters 19625 62nd Ave. S., Suite B-103 Kent, Washington  98032 USA Tel  425 251 0559 / 800 288 3610  Fax  253 395 2800 E-mail  DCI@digital-control.com  www.digitrak.com  DCI Europe Kurmainzer Strasse 56 D-97836 Bischbrunn  Germany Tel +49(0) 9394 990 990 Fax +49(0) 9394 990 999 DCI.Europe@digital-control.com DCI India SCO # 259, Sector 44-C Chandigarh (UT) 160 047 Punjab, India Tel +91(0) 172 464 0444 Fax +91(0) 172 464 0999 DCI.India@digital-control.com DCI China No. 41, Lane 500, Xingle Road Huacao Town, Minhang District Shanghai P.R.C. 201107  Tel +86(0) 21 6432 5186 Fax +86(0) 21 6432 5187 DCI.China@digital-control.com DCI Australia 2/9 Frinton Street Southport, Queensland 4215 Australia Tel +61(0) 7 5531 4283 Fax +61(0) 7 5531 2617 DCI.Australia@digital-control.com DCI Russia 420059 Pavlyukhina Street  104, Kazan Russia Tel +7 843 277 52 22 Fax +7 843 277 52 07 DCI.Russia@digital-control.com
DIGITAL CONTROL INCORPORATED    2  DigiTrak® F2® Operator’s Manual 3-2200-00-C    © 2009 by Digital Control Incorporated. All rights reserved. November 2009.  68BTrademarks  The DCI logo, CableLink®, DataLog®, DigiTrak®, Eclipse®, F2®, iGPS®, MFD®, SST®, target-in-the-box®, Target Steering®, and TensiTrak® are U.S. registered trademarks and DucTrak™, F Series™, FSD™, FasTrak™,  LT™, LT2™,  SE™,  SuperCell™,  and TeleLock™ are trademarks of Digital Control Incorporated.  69BPatents  The DigiTrak® F2® Locating System is covered by one or more of the following U.S. Patents: 5,337,002; 5,633,589; 5,990,682; 5,990,683; 6,002,258; 6,005,532; 6,008,651; 6,014,026; 6,035,951; 6,047,783; 6,057,687;  6,095,260;  6,160,401; 6,232,780; 6,250,402;  6,396,275;  6,496,008;  6,525,538; 6,593,745; 6,653,837;  6,693,429; 6,756,784;  6,768,307; 6,838,882; 6,924,645; 7,061,244; 7,080,698; 7,154,273; 7,159,672; 7,167,005; 7,176,690; 7,304,479; 7,309,990; 7,345,486. Sale of a DigiTrak® F2® receiver does not convey a license under any patents covering the DigiTrak® transmitter or underground drill housing. Other patents pending.  70BLimited Warranty  All products manufactured and sold by Digital Control Incorporated (DCI) are subject to the terms of a Limited Warranty. A copy of the Limited Warranty is included with your DigiTrak® F2® Locating System; it can also be obtained by contacting DCI Customer Service, 800-288-3610 or 425-251-0559, or by connecting to DCI's website, www.digitrak.com.  71BImportant Notice  All statements, technical information, and recommendations related to the products of DCI are based on information believed to be reliable, but the accuracy or completeness thereof is not warranted. Before utilizing any DCI product, the user should determine the suitability of the product for its intended use. All statements herein refer to DCI products as delivered by DCI and do not apply to any user customizations not authorized by DCI nor to any third-party products. Nothing herein shall constitute any warranty by DCI nor will anything herein be deemed to modify the terms of DCI’s existing Limited Warranty applicable to all DCI products.  72BFCC Compliance Statement  This equipment has been tested and found to comply with the limits for Class A digital devices, pursuant to Part 15 of the Rules of the Federal Communications Commission. These limits are designed to provide reasonable protection against harmful interference in a horizontal directional drilling installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications or inaccurate readings on your DCI locating equipment. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the DigiTrak® F2® receiver.  Increase the separation between the problematic equipment and the DigiTrak® F2® receiver.  Connect the equipment into an outlet on a different circuit.  Consult the dealer for help. Changes or modifications to the DCI equipment not expressly approved and carried out by DCI will void the user’s Limited Warranty and the FCC’s authorization to operate the equipment.
Download:
Mirror Download [FCC.gov]
Document ID1199313
Application IDBqiYQqMs7xxJgxQrGw+czQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize90.86kB (1135689 bits)
Date Submitted2009-11-13 00:00:00
Date Available2009-11-13 00:00:00
Creation Date2009-11-09 14:08:00
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2009-11-09 14:08:20
Document TitleOperating Instructions
Document CreatorAcrobat PDFMaker 9.1 for Word
Document Author: Kristie Hammond
FCC ID Filing: KKGFX

Navigation menu