NTSC Sec_10/327 352 2001 Catalog Pages 327
User Manual: 2001 Catalog - Pages 327-352
Open the PDF directly: View PDF .
Page Count: 26
Download | |
Open PDF In Browser | View PDF |
SECTION 10 OTHER VIDEO EQUIPMENT AND ACCESSORIES 1. Peripheral equipment .......................................328 2. Batteries and chargers .....................................333 3. AC Adaptor ........................................................338 4. System consoles...............................................341 5. Connecting cables ............................................342 6. Videocassette tape 6-1 Batacam SP Videocassette Tapes ................347 6-2 DVCAM Videocassette Tapes .......................348 6-3 S-VHS Videocassette Tapes .........................350 OTHER VIDEO EQUIPMENT AND ACCESSORIES 7. Memory stick™ .................................................351 –327– 1 Peripheral equipment VCS-1000 Video Selector •For use in combination with the SVRM-960 Bi-directional remote controller for high quality picture monitoring •Minimizes the signal reflections caused by long cable runs •Up to 20 SVO-965 units equipped with the SVBK-902 optional Bi-directional interface board can be connected to a single VCS-1000 •Loop-through output is provided for connection of up to 50 VCS-1000 units •19-inch EIA rack mountable in various directions •On-Line indicator •When the power is turned off, the LINE OUT becomes a loopthrough output of the LINE IN for easy maintenance Supplied accessories: Mounting brackets (EIA 2U width ç 2, DIA 3U width ç 2) AC power cord Operation manual Specifications OTHER VIDEO EQUIPMENT AND ACCESSORIES General Mass: Dimensions: Approx. 4 kg (8 lb 13 oz) 424 (W) ç 88 (H) ç 132 (D) mm (163/4 ç 31/2 ç 51/4 inches) Power requirements: AC 120V, 50/ 60Hz Power consumption: 8.5W max. Maximum number of VTR connection: 20 units Video Video signal system: EIA monochrome, NTSC color Frequency response: 6MHz, 100kHz reference S/N ratio: More than 54dB Audio Frequency response: 20Hz to 20kHz, 1kHz ≈10dBu standard S/N ratio: More than 85dB RF video Frequency response: 6MHz S/N ratio: More than 54dB Video inputs/outputs Video in (from SVO-965): BNC (ç20), 1Vp-p, sync negative, 37.5Ω, unbalanced Line in video (from previous VCS-1000): BNC, 1Vp-p, sync negative, 75Ω, unbalanced Line out video (to SVRM-960 or next VCS-1000): BNC, 1Vp-p, sync negative, 75Ω, unbalanced Control inputs/outputs Control input (from SVO-965): BNC (ç20) Rx*1 input: 1Vp-p, 37.5Ω, unbalanced Tx*2 output: 1.4Vp-p, 37.5Ω, unbalanced Line in control (from previous VCS-1000): BNC Tx intput: 1Vp-p, 37.5Ω, unbalanced Rx output: 1Vp-p, 37.5Ω, unbalanced Line out control (to SVRM-960 or next VCS-1000): BNC Tx input: 1Vp-p, 37.5Ω, unbalanced Rx output: 1Vp-p, 37.5Ω, unbalanced RF RF IN (from the SVO-965): BNC (ç20), 1Vp-p, 37.5Ω, unbalanced Line IN RF (from previous VCS-1000): BNC, 1Vp-p, 75Ω, unbalanced Line Out RF (to SVRM-960 or next VCS-1000): BNC, 1Vp-p, 75Ω, unbalanced Audio inputs/outputs Audio Input (from SVO-965):Phono(2-channel ç 20), high impedance, unbalanced Line In audio (from previous VCS-1000): Phono (2-channel), high impedance, unbalanced Line Out audio (to SVRM-960 or next VCS-1000): Phono (2-channel), high impedance, unbalanced *1: Rx: Signal output from the SVRM-960 *2: Tx: Signal output from the SVO-965 –328– 1 Peripheral equipment ß VCS-63A Video and Audio Selector •A video and Audio (stereo) Signal can be selected from the six video and audio sources. •Equipped with the loop-through out connectors for each input signal. •When two or more selectors are connected in parallel, using the loop-through capability, a camera or VTR signal can be selected independently. •Can be mounted into a 19-inch EIA standard rack using the supplied rack mount adaptor. Dimensions: Approx. 424(W) ç 44(H) ç 170(D)mm (163/4 ç 13/4 ç 63/4 inches) Mass: Approx. 3kg (6 lb 10 oz) Connectors: VIDEO IN/OUT—BNC type AUDIO IN/OUT—PHONO Supplied accessories: Rack mount adaptor (ç2) Screw for rack mounting (ç4) IN - 1 IN - 2 ON IN - 3 ON IN - 4 ON IN - 5 ON IN - 6 ON OUT IN - 1 IN - 2 IN - 3 IN - 4 IN - 5 IN - 6 OUT ON L 75Ω 75Ω OFF RGB Distribution Unit •Provides AV applications including PC cost effective and high performance analog RGB distribution •One analog RGB signal is distributed into two signals and monitor signal(total three) •Monitor signal is routed through the D-sub 15p connector to monitor display •Wide frequency response of up to 250 MHz(BNC output) •Compact and durable enclosure is available Inputs Connector: BNC (x5) RGB level: 0.7 Vp-p RGB impedance: 75 Ω Hs/Cs level: 1 V-4 Vp-p Hs/Cs impedance: 47 kΩ Hs/Cs sync: Positive/negative Vs level: 1 V-4 Vp-p Vs impedance: 47 kΩ SRP-200DA AV Distribution Amplifier •Can distribute an AV input signal in five ways •The 75Ω terminator of the video input is automatically disconnected when a cable is connected to the stacking terminal. Up to four units can be connected in parallel •Can be mounted into a 19-inch EIA standard rack General Dimensions: 482(W) × 44(H) × 175(D)mm (19 × 13/4 × 7 inches) Mass: 2.5kg (5 lb 8 oz) Power requirements: AC 120V, 230V, 50Hz/60Hz Power consumption: 5W Operating temperature: 0 to 40°C (32 to 104°F) Storage temperature: -20 to +60°C (-4 to +140°F) OFF 75Ω OFF 75Ω OFF 75Ω OFF OFF R Outputs 1, 2 Connector: BNC (x5) RGB level: 0.7 Vp-p Hs/Cs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance Vs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance Monitor out Connector: D-sub 15p RGB level: 0.7 Vp-p Hs/Cs level: 1 Vp-p /75 Ω, 4 Vp-p/high impedance Vs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance Electoric characteristics RGB bandwidth Output 1, 2: 40 Hz to 250 MHz+3/-3 dB Monitor out: 40 Hz to 200 MHz+3/-3 dB Gain difference between RGBs: 0.2 dB Delay between RGBs: Less than 1 ns General Power requirements: Power consumption: Power plug converter for 120 V 4W Video Frequency responce: 100 kHz to 10 MHz, -0.5dB DG: Less than 0.5% DP: Less than 0.4° Input: 75Ω/high impedance (high impedance at stacking output) BNC connector ×1 Outputs: 75Ω, BNC connector ×5 (high impedance at stacking output) Audio Frequency response: 20Hz to 20kHz Harmonic distortion: Less than 0.005% Inputs (one stereo) Reference level: -10dBu Max. level: +10dBu Impedance: 47kΩ Type: Phono jack (stereo x5) Circuit: Unbalanced Outputs (five stereo) Reference level: -10dBu –329– Max. level: Impedance: Type: Circuit: +10dBu 47Ω Phono jack Unbalanced OTHER VIDEO EQUIPMENT AND ACCESSORIES SRP-12DAR 75Ω 1 Peripheral equipment VCS-500 Video and audio switcher with blanking switch facility •The system using the VCS-500 can operate synchronically with the external sync or the video signal connected to the VIDEO IN-1 connector. The signal can be switched in the blanking portion so that switching noise is eliminated •Up to five video and audio signals can be controlled •Remote control is possible when an RM-V5 VTR selector is used •DUB circuit switching function •Can be mounted into 19-inch EIA standard rack Inputs: Outputs: Video—1Vp-p of rating, 75Ω, unbalanced, sync negative Sync—3V ±1Vp-p, 75Ω, unbalanced, negative Audio—LINE IN CH-1/CH-2, ≈5dB of rating, 47kΩ Video—Rated input ±0.2Vp-p, 75Ω, unbalanced, sync negative Sync—3V ±1Vp-p, 75Ω, DA-1400 Video/audio distributor •Two video/audio inputs and fourteen distribution outputs •Four distribution patterns are available: Input signal A (1 to 14 ch), Input signal B (1 to 14 ch), Input signal A (1 to 7 ch)/Input signal B (8 to 14 ch), Input signal B (1 to 7 ch)/Input signal A (8 to 14 ch) •Loop-through output connector for each input signal to expand the connection with other DA-1400s •Video/audio level meters for adjusting and confirming the output signal levels •Audio input level selector (≈10dB/-6dB) •19-inch EIA standard rack mountable OTHER VIDEO EQUIPMENT AND ACCESSORIES Supplied accessories: AC power cord Mounting brackets (EIA 2U width: 1 pair) Operation manual Color and monochrome video/audio distributor with DUB connectors •Five Video/DUB/Audio outputs and one direct output •DUB connectors are furnished so that a high quality video signal will be obtained •Up to four DA-500s can be connected in series so that the input signal can be divided into as many as 20 separate signals •Can be mounted into 19-inch EIA standard rack Outputs: SYNC OUT SYNC OUT SYNC OUT SYNC OUT SYNC OUT SYNC OUT SYNC IN IN - 5 GROUP SELECT IN VIDEO IN - 4 VIDEO OUT IN - 3 VIDEO CH1/L LINE VIDEO CH1/L LINE CH2/R DUB DUB LINE CH2/R OUT VIDEO CH1/L CH1/L LINE CH2/R IN - 1 IN - 2 VIDEO CH1/L LINE CH1/L DUB LINE CH2/R CH2/R CH2/R ≥ AC IN REMOTE General Mass: Dimensions: 6 kg (13 lb 23 oz) 424 (W) ç 88 (H) ç 350 (D) mm (163/4 ç 31/2 ç 137/8 inches) Power requirements: AC 120V, 50/60Hz Power consumption: 16W Video Inputs: Loop-through, BNC (ç2), 1Vp-p, 75Ω, sync negative Outputs: BNC (ç14), 1Vp-p, 75Ω, sync negative S/N ratio: Better than 60dB Frequency response: 10MHz ± 1dB Audio Inputs: Loop-through, Phono (2-channel) (ç2) Input level: ≈10dBu/≈6dBu switchable, 50kΩ Outputs: Phono (2-channel) (ç14) Output level: ≈10dBu/≈6dBu, 100Ω S/N ratio: Better than 70dB at 600Ω Frequency response: 20Hz to 20kHz ±1dB Distortion: Less than 0.1%, ≈10dBu at 1kHz Connectors: DA-500 Inputs: unbalanced, negative Audio—LINE OUT CH-1/CH-2, rated input ±2dB, 47kΩ Frequency response: Video ±1dB (up to 6MHz) Audio 50 to 15,000Hz ±1dB Connectors: VIDEO IN/OUT—BNC SYNC IN/OUT—BNC AUDIO IN/OUT—Phono REMOTE IN/OUT—20-pin DUB IN/OUT—7-pin Power requirements: AC 100/110/120/127/220/240V ±10% (selectable), 50/60Hz Power consumption: 20W Dimensions: 480 (W) ç 87 (H) ç 280 (D) mm (19 ç 31/2 ç 111/8 inches) Mass: 7 kg (15 lb 7 oz) Supplied accessories: AC power cord Screw for rack mounting VIDEO IN/OUT, DIRECT OUT— BNC AUDIO IN/OUT, DIRECT OUT— Phono Power requirements: AC 100/110/120/127/220/240V ±10% (selectable), 50/60Hz Power consumption: 20W Dimensions: 480 (W) ç 87 (H) ç 280 (D) mm (19 ç 31/2 ç 111/8 inches) Mass: 6.1 kg (13 lb 7 oz) Supplied accessories: AC power cord Screw for rack mounting Video—1Vp-p of rating, 75Ω, unbalanced, sync negative Audio—LINE CH-1/CH-2, ≈5dB of rating, 47kΩ, unbalanced Video—OUT 1 to 5, Rated input ±0.2Vp-p, 75Ω, unbalanced, sync negative Audio—LINE CH-1/CH-2, Rated input ±2dB, 47kΩ OUT - 5 VIDEO OUT - 4 VIDEO CH1/L DUB LINE CH2/R OUT - 3 VIDEO CH1/L DUB LINE CH2/R OUT - 2 VIDEO CH1/L DUB LINE CH2/R OUT - 1 VIDEO CH1/L DUB LINE CH2/R DUB VIDEO LINE CH2/R OUT DIRECT-OUT CH1/L VIDEO CH1/L CH1/L DUB LINE CH2/R DUB LINE CH2/R ≥ AC IN –330– 1 Peripheral equipment Video input: VA-200E Cable compensator for stable color/monochrome video transmission •Compensates for the attenuation caused by long-distance transmission of color/monochrome video signals with a coaxial cable •Especially effective for the transmission of color video signals Length adjustments 3C-2V 5C-2V 7C-2V 1 180m 300m 370m 10C-2V 500m 2 360m 600m 750m 1000m 3 540m 900m 1100m 1500m 4 720m 1200m 1500m 2000m PVS-1680S Matrix Switcher •Sixteen inputs and eight outputs matrix functions •RS-232C interface port for remote control from a PC •Reference video input and roop-through output •Memory function up to 50-scene •Equipped with a LOCK SWITCH to prevent inadvertent operation •4U high, mountable in 19-inch standard rack Supplied accessory: Power cable (1) 1.0Vp-p to 1.4Vp-p 75Ω, unbalanced Video output: 1Vp-p, 75Ω, unbalanced Frequency response: Flat to 4.5MHz ±2dB Operating temperature: 0 to 40°C (32 to 104°F) Connectors: VIDEO IN/OUT—UHF (M-type) Power requirements: AC 110 to 130/220 to 240V selectable, 50/60Hz Power consumption: 6W Dimensions: 214 (W) ç 75 (H) ç 171 (D) mm (81/2 ç 3 ç 63/4 inches) Mass: 1.4 kg (3 lb 4 oz) Supplied accessory: AC power cord Video (Composite) Input and output connector: Number of input ch: Number of output ch: Input and output impedance: Frequency response: DG: DP: BNC 16 8 75 Ω 60 HZ to 10 MHz +0.8 dB/-1 dB Less than 0.5% Less than 0.5° S-Video Input and output connector: 4-pin mini DIN Number of input and output: 4* *Interlocked with channels to 1 to 4 of composite input Audio Input and output connector: Phono Number of input ch: 16 (stereo) Impedance: 47 kΩ Reference(Max.) input level: -10 dBu (+16 dBu) Input impedance: 47 kΩ Number of output ch: 8 (stereo) Impedance: 470 Ω Reference(Max.) output level: -10 dBu (+16 dBu) Output impedance: 470 Ω Load impedance: More than 10 kΩ Frequency response: 20 Hz to 20 kHz, +0.1 dB/ -0.5 dB T.H.D.: Less than 0.005% Input and output impedance: 75 Ω Frequency response: 60 Hz to 10 MHz PVS-1240S Output impedance: 470 Ω Load impedance: More than 10 kΩ Frequency response: 20 Hz to 20 kHz, +0 dB/ -0.5 dB T.H.D.: Less than 0.002% Video (Composite) Inputs and output connector: BNC Number of input ch: 12 Number of output ch: 4 Input and output impedance: 75 Ω Frequency response: 60 Hz to 10 MHz, +0.8 dB / -0.5 dB DG: Less than 0.5% DP: Less than 0.5° S-Video Input and output connector: 4-pin mini DIN Number of input and output ch : 4* •Twelve inputs and four outputs matrix functions •RS-232C interface port for remote control from a PC •Reference video input and loop-through output •Memory function up to 50-scene •Equipped with a LOCK SWITCH to prevent inadvertent operation •4U high, mountable in 19-inch standard rack Supplied accessories: Power cable (1), Plug adaptor (1) Audio Inputs and output connector: Phono Number of input ch: 12 (stereo) Impedance: 47 kΩ Reference(Max.) input level: -10 dBu (+16 dBu) Input impedance: 47 kΩ Number of output ch: 4 (stereo) Impedance: 470 Ω Reference(Max.) output level: -10 dBu (+16 dBu) AC 230 V, 50/60 Hz 25 W 0 to 40°C (32 to 10°F) -20 to 60°C (-4 to 140°F) 13 kg( 22 lb 1 oz ) 482 (W) × 176 (H) × 350 (D) mm (19 × 7 × 137⁄8 inches) *Interlocked with ch1 to 4 of composite input Input and output impedance: 75 Ω Frequency response: 60 Hz to 10 MHz General Power requirements: AC 120/230 V, 50/60 Hz Power consumption: 18 W –331– Operating temperature: Storage temperature: Mass: Dimensions: 0 to 40°C (32 to 10°F) -20 to 60°C (-4 to 140°F) 10 kg (22 lb 1 oz) 482 (W) × 176 (H) × 350 (D)mm (19 × 14 × 13 7⁄8 inches) OTHER VIDEO EQUIPMENT AND ACCESSORIES Matrix Switcher General Power requirements: Power consumption: Operating temperature: Storage temperature: Mass: Dimensions: 1 Peripheral equipment Frequency response: 20 Hz to 20 kHz +0.1/-0.5dB T.H.D.: Less than 0.005% PVS-880S Matrix Switcher •Eight inputs and eight outputs matrix functions •RS-232C interface port for remote control from a personal computer •Reference video input •Memory function •Equipped with a LOCK SWITCH to prevent inadvertent operation •Can be mounted in a 19-inch EIA standard rack Supplied accessory: Power cable (1) Audio Input and output connector: Phono Number of input ch: 8 (stereo) Impedance: 47 Ω Reference (max.) input level: -10 dBu (+16 dBu) Input impedance: 47 Ω Number of output ch : 8 (stereo) Impedance: 470 Ω Reference (max.) output level: -10 dBu (+16 dBu) Output impedance: 470 Ω Load impedance: More than 10 kΩ PVS-820S Matrix Switcher •Eight inputs and two outputs matrix functions •Reference video input •Equipped with a LOCK SWITCH to prevent inadvertent operation •Can be mounted in a 19-inch EIA standard rack Supplied accessory: Power cable (1) S-Video Input and output connector: 4-pin mini-DIN Number of input and output ch: 4* *Interlocked with ch 1 to 4 of composite input Input and output impedance: 75 Ω Frequency response: 60 Hz to 10 MHz ±0.5 dB *Except for North America Video (Composite) Input and output connector: BNC Number of input ch: 8 Number of output ch: 2 Input and output impedance: 75 Ω Frequency response: 60 Hz to 10 MHz +0.3 dB/-1dB DG: Less than 0.5% DP: Less than 0.5° General Power requirements: AC 120V–230V, 50/60Hz Power consumption: 17W Operating temperature: 0 to 40°C (32 to 10°F) Storage temperature: –20 to 60°C (–4 to 140°F) Mass: 4kg (8 lb 13 oz) Dimensions: 482(W) × 88(H) × 220(D)mm (19 × 3 1/2 × 8 3/4 inches) S-Video Input and output connector: 4-pin mini-DIN Number of input ch: 4* Number of output ch: 2 *Interlocked with ch 1 to 4 of composite input Input and output impedance: 75 Ω Frequency response: 60 Hz to 10 MHz +0.3/-1dB *Except for North America OTHER VIDEO EQUIPMENT AND ACCESSORIES Audio Input and output connector: Phono Number of input ch: 8 (stereo) Impedance: 75 Ω Reference (max.) input level: -10 dBu (+10 dBu) Input impedance: 47 Ω Number of output ch: 2 (stereo) Impedance: 470 Ω Reference (max.) output level: -10 dBu (+10 dBu) Output impedance: 470 Ω Load impedance: More than 10 kΩ Frequency response: 20 Hz to 20 kHz +0.1/-0.5dB T.H.D.: Less than 0.005% Video (Composite) Input and output connector: BNC Number of input ch: 8 Number of output ch: 8 Input and output impedance: 75 Ω Frequency response: 60 Hz to 10 MHz +0.8 dB/-0.5dB DG: Less than 0.5% DP: Less than 0.5° General Power requirements: AC 120–230V, 50/60Hz Power consumption: 17W Operating temperature: 0 to 40°C (32 to 104°F) Storage temperature: –20 to 60°C (–4 to 140°F) Mass: 10kg (22 lb 1 oz) Dimensions: 482(W) × 132(H) × 350(D)mm (19 × 51/4 × 137/8 inches) –332– 2 Batteries and chargers BC-1WD Battery charger for NP-1B •Battery charger for the NP-1B battery pack •Up to four NP-1B batteries can be charged •Auto refresh function •Battery life indication •Skips charging process for fully charged batteries Power requirements: AC 120 V ±10%, 50/60 Hz Power consumption: 51 W Charging time: Approx. 90min Dimensions: 107.5 (W) × 88 (H) × 325 (D) mm (41/4 × 31/2 × 127/8 inches) Mass: Approx. 1.7 kg (3 lb 5 oz) BC-410 Battery charger for BP-90A/NP-1B Supplied accessories: AC power cord Operation/maintenance manual •Battery charger for BP-90A and NP-1B •Up to four BP-90As and four NP-1Bs can be charged •Battery refreshing function •Trickle charge to avoid self-discharge Power requirements: AC 100/120V selectable, 50/60Hz Power consumption: 75W Charging time: BP-90A: 160 min NP-1B: 90 min Dimensions: 212 (W) × 85 (H) × 325 (D) mm (41/2 × 33/8 × 127/8 inches) Mass: 4 kg (8 lb 13 oz) Lithium-ion Battery Charger •Compact and mobile battery charger which can be used with Lithium-ion battery packs •Up to two Lithium-ion batteries attached •Use a unique new time-saving charging system for quick charges Power requirements: AC 120 V, 60 Hz Output: DC 16.8 V, 2.2 A Power consumption: Approx. 49 W Operating temperature: -5° C to 45° C (23° F to 113° F) Storage temperature: -20° C to 60° C (-4° F to 140° F) Operating/storage humidity: 5 to 90 % RH BC-L100 Battery charger for BP-L60A BP-L90A/NP-1B/BP-90A Mass: 1.1 kg (2 lb 6 oz) Dimensions (w/h/d): 60 × 191 × 130 mm (2 3⁄8 × 7 5⁄8 × 5 1⁄8 inches) (w/o projections) Charge system: Constant voltage and current charge system with timer stop system Charge control system: Constant voltage and current chargecontrol system Booster charge current: Approx. 2.2 A OTHER VIDEO EQUIPMENT AND ACCESSORIES BC-L50 Dimensions: 330 (W) × 131 (H) × 144 (D) mm (13 × 51/4 × 53/4 inhes) Mass: Approx. 2 kg (4 lb 7 oz) •Battery charger for BP-L60A/BP-L90A/ NP-1B/BP-90A batteries •Up to four BPL60A, BP-L90A, NP-1B or BP-90A can be charged Power requirements: AC100V to 240V, 60Hz Power consumption: 110W Charging time: BP-L60A: Approx. 2.5 hours BP-L90A: Approx. 3.5 hours NP-1B: Approx. 70 min –333– 2 Batteries and chargers BC-V500 Battery charger •Compact battery chager for the NP-F530/F730/F930, etc. •Two batteries can be charged at the same time Dimensions: 45(W) × 98(H) × 50(D) mm Mass: Approx. 120 g Power requirements: AC100 to 240V, 50/60Hz Output: DC 8.4V/0.6A BKW-L601 Battery adaptor for between DSR-1, PVV-3 and BP-L60A/BP-L90A •Can be attached to the optional battery case of the DSR-1 DVCAM recorder and the PVV-3 Betacam SP 2000 PRO recorder •Allows the DSR-1 and the PVV-3 to be operated with BP-L60A and BP-L90A Dimensions: 89 (W) × 141.4 (H) × 14.2 (D) mm (35/8 × 55/8 × 9/16 inches) Mass: 110 g (4 oz) DC-520 Battery adaptor for NP-1B OTHER VIDEO EQUIPMENT AND ACCESSORIES •Can be attached to the supplied battery case of the DSR-1, PVV-3 Betacam SP 2000PRO recorder UVW-100B •Allows the DSR-1, PVV-3 and UVW-100B to be operated with two NP-1B batteries •Supplies DC 12V to the DSR-1, PVV-3 and UVW-100B Dimensions: 100 (W) × 195 (H) × 44 (D) mm (4 × 73/4 × 13/4 inches) Mass: 230 g (8 oz) Supplied accessories: Screws (M3 × 6) DC-500 (Mount type) Battery case for BP-90A •Battery case for one BP-90A battery •Designed for the DSR-1, PVV-3 and UVW-100B •Supplies DC 12V Dimensions: 147 (W) × 207 (H) × 62 (D) mm (57/8 × 81/4 × 21/2 inches) Mass: 400 g (14 oz) Supplied accessories: Screws (M3 × 5) –334– 2 Batteries and chargers DC-210 (waist belt type) Battery case for BP-90A •Battery case for one BP-90A battery pack •Supplies DC 12V to Sony video equipment Dimensions: 145 (W) × 180 (H) × 85 (D) mm (53/4 × 71/8 × 33/8 inches) Mass: 500 g (1 lb 2 oz) Supplied accessories: Power cord (1.2m) (×1) Belt DC-L1 Battery Case for NP-1B •Battery Case for a NP-1B battery to be used with the camcorders/portable editors which incorporates the V-shoe attachment •Quick and easy battery change Specifications Dimensions: 101(W) × 196.2(H) × 54.8(D) mm (4 × 73⁄4 × 21⁄4 inches) Mass: 300g (11 oz) DC-L90 Battery Case for BP-90A •Battery Case for a BP-90A battery to be used with the camcorders/portable editors which incorporates the V-shoe attachment •Quick and easy battery change Specifications OTHER VIDEO EQUIPMENT AND ACCESSORIES Dimensions: 138(W) × 203.6(H) × 76.6(D) mm (51⁄2 × 81⁄8 × 31⁄8 inches) Mass: 620g (1 lb 6 oz) BP-L40 Lithium-ion Battery •Compact Lithium-ion battery for professional Sony camcorders, which is designed to match the body height of the DSR-300 Battery type: Lithium-ion battery Maximum voltage: 16.8 V DC Nominal voltage: 14.4 V DC Capacity: 38.9 Wh Dimensions (w/h/d): 92 × 138 × 37 mm (3 5⁄8 × 5 1⁄2 × 1 1⁄2 inches) Mass: Approx. 520 g (1 lb 1 oz) –335– 2 Batteries and chargers BP-L60A Rechargeable Lithium Ion Battery Pack •High capacity lithium-ion battery •No “Memory Effect” •Built-in LED capacity indicator for a quick visual check of the remaining charge •V-shoe attachment for quick and easy battery change BP-L90A Rechargeable Lithium Ion Battery Pack •High capacity lithium-ion battery •No “Memory Effect” •Built-in LED capacity indicator for a quick visual check of the remaining charge •V-shoe attachment for quick and easy battery change Specifications Type of battery: Lithium-ion rechargeable Maximum voltage: 16.8V Nominal voltage: 14.4V Current capacity: 60Wh Cell capacity: 5.4Ah Operating temperature: –20°C to +45°C (–4°F to +113°F) Dimensions: 101(W) ç 168.7(H) ç 37(D) mm (4 ç 63⁄4 ç 11⁄2 inches) Mass: 900g (1 lb 16 oz) Specifications Type of battery: Lithium-ion rechargeable Maximum voltage: 16.8V Nominal voltage: 14.4V Current capacity: 90Wh Cell capacity: 8.1Ah Operating temperature: –20°C to +45°C (–4°F to +113°F) Dimensions: 101(W) ç 168.7(H) ç 60(D) mm (4 ç 63⁄4 ç 23⁄8 inches) Mass: 1300g (2 lb 14 oz) BP-90A Rechargeable battery pack •Supplies DC 12V to DSR-1, PVV-3, UVW-100B, PVM-8045Q/8042Q/5041Q, TU-1040E Type of battery: OTHER VIDEO EQUIPMENT AND ACCESSORIES NiCd rechargeable Voltage: DC 12V Current capacity: 5Ah Dimensions: 123 (W) × 171 (H) × 37 (D) mm (47/8 × 63/4 × 11/2 inches) Mass: 1.6 kg (31 lb 8 oz) NP-1B Rechargeable battery pack •Supplies DC 12V to DSR-1, PVV-3, UVW-100B, VO-8800, DXC-D30/D30WS/ 327B, PVM-8045Q/8042Q/5041Q, TU-1040E, EVM-9010PR/1410PR Battery used: Output voltage: Capacity: Dimensions: Mass: NiCd battery DC 12V 2.3 Ah Approx. 72 (W) × 25 (H) × 185 (D) mm (27/8 × 1 × 73/8 inches) Approx. 600 g (1 lb 5 oz) –336– 2 Batteries and chargers NP-F220/B InfoLITHIUM Rechargeable Battery Pack Maximum voltage: 8.4 V DC Capacity: 1400mAh Dimensions (w/h/d): 82 × 20 × 54 mm (3 1⁄4 × 13⁄16 × 2 1⁄4 inches) Mass: Approx. 100 g (3 oz) NP-F950 InfoLITHIUM Rechargeable Battery Pack Maximum voltage: 7.2 V DC Capacity: 4050mAh Dimensions: 38.4(W) × 59.7(H) × 70.8(D) mm Mass: Approx. 280 g NPA-10000/B Three-battery Holder *Can hold three NP-F950 InfoLITHIUM Rechargeable Battery Pack OTHER VIDEO EQUIPMENT AND ACCESSORIES Power requirements: 7.2 VDC Dimensions (w/h/d): 95 × 132 × 81mm (3 3⁄4 × 5 1⁄4 × 3 1⁄4 inches) Mass: Approx. 220 g NP-F550 (F530) InfoLITHIUM Rechargeable Battery Pack •Can be used for the DKC-CM30 Voltage: 7.2V Capacity: 1500 mAh (1350 mAh) Dimensions (W × H × D): 38.4 × 20.6 × 70.8 mm (1 9⁄16 × 13⁄16 × 2 7⁄8 inches) Mass: Approx. 95 g (110 g) –337– 3 AC adaptor AC-550 AC Adaptor •Supplies DC power to the one-piece camcorder and a portable VTR through the 26-pin (CCZ-type) camera connector or the XLR 4-pin DC OUT connector Supplied accessories: AC power cord DC power cord Operation and Maintenance manual Power requirements: AC 110 to 120V/220 to 240V ±10% selectable, 60Hz Power consumption: Max 130W DC output: 13.5V, 7A Input/Output connectors: CAMERA: CCZ-type 26-pin VIDEO OUT: BNC type MIC OUT: Equivalent to XLR-3-31 DC OUT: Equivalent to XLR-4-31 EXT VBS: BNC type Dimensions: 217 (W) × 91 (H) × 327 (D) mm (85/8 × 35/8 × 127/8 inches) Mass: 3.8 kg (8 lb 6 oz) CMA-8A AC Adaptor •Supplies AC power to the one-piece camcorder and portable VTR through the 14-pin(CCQBRS) camera connector Power requirements : AC 110 to 127V or 220 to 240V selectable, 50/60Hz Power consumption : 95W Dimensions: 105(W) × 105 (H) × 308 (D) mm (4 1⁄4 × 4 1⁄4 × 12 1⁄4 inches) Mass: Approx. 2.8 kg (6 lb 2.8 oz) AC-DN1 OTHER VIDEO EQUIPMENT AND ACCESSORIES AC Adaptor Power requirements: AC 100V to 240V Power consumption: 50W (90VA) or less Power output (DC): 38W Voltage output (DC): 16.7V Mass: 660g Demensions: 112(W) × 169(H) × 38(D)mm Charging time: BP-L60A 4hr. (to about 85% capacity) BP-L90A 6hr. (to about 85% capacity) Supplied accessories: DC power cord (1) BKW-L601/1 (1) AC-DN2A AC Adaptor Power requirements: Power consumption: Power output (DC): Voltage output (DC): Mass: Demensions: Charging time: capacity) AC 100V to 240V 180W 150W 16.7V 1kg 112(W) × 169(H) × 70(D)mm BP-L60A 4hr. (to about 85% BP-L90A 6hr. (to about 85% capacity) Supplied accessories: DC power cord (1) –338– 3 AC adaptor AC-V100/B AC adaptor/battery charger *Battery charger for InfoLITHIUM battery such as NP-F220/B and AC adoptor Power requirement: AC 100V to 240V, 50/60Hz Power consumption: 25 W Dimensions (w/h/d): 57 × 44 × 107 mm (2 1⁄4 × 1 6⁄8 × 4 1⁄4 inches) Mass: Approx. 190 g (6 oz) AC-V900/B Three-battery charger/AC adaptor *Battery charger which can hold threebattery such as NP-F950/B and AC adoptor Power requirement: AC 100V to 240V, 50/60Hz Power consumption: 70W Dimensions (w/h/d): 169(W) × 58(H) × 153(D) mm Mass: Approx. 650 g AC-VQ800 AC Adaptor/Charger •AC adaptor for Lithium-ion type camcorder •Battery charger for Lithium-ion batteries: InfoLITHIUM L series (NP-F550/750/950) and InfoLITHIUM M series(consumer) Specifications: OTHER VIDEO EQUIPMENT AND ACCESSORIES Power requirment: AC 100 V to 240 V, 50 Hz/60 Hz VTR mode: DC 8.4 V/2.0 A Charge mode: DC 8.4 V/1.4 A Dimensions: 136.0(W) × 51.5(H) × 89.7(D) mm (5 3⁄8 × 2 1⁄8 × 3 5⁄8 inches) Mass: Approx. 250 g (0.6 lb) Supplied accessories: Connectign cable DK-415 (DC plate type) DK-215 (DC IN type) AC power cord (mains lead) DC-VQ800 DC Adaptor/Charger •Car battery adaptor for Lithium-ion type camcorder •Battery charger for Lithium-ion batteries: InfoLITHIUM L series (NP-F550/750/950) and InfoLITHIUM M series(consumer) Specifications Power requirement: DC 12 V/24 V VTR mode: DC 8.4 V/2.0 A Charge mode: DC 8.4 V/1.4 A Dimensions: 136.0(W) × 51.5(H) × 89.7(D) mm (5 3⁄8 × 2 1⁄8 × 3 5⁄8 inches) Mass: Approx. 300 g (0.7 lb) Supplied accessories: Connectign cable DK-415 (DC plate type) DK-215 (DC IN type) –339– 3 AC adaptor AC-V700 AC Adaptor/Charger •AC adaptor for Lithium-ion type camcorder •Battery charger for Lithium-ion batteries: InfoLITHIUM L series (NP-F550/750/950) and NP-F100/200/220 Specifications: Power requirement: AC 100 V to 240 V, 50 Hz/60 Hz VTR mode: DC 8.4 V/2.0 A Charge mode: DC 8.4 V/1.4 A Dimensions: 127.0(W) × 54.8(H) × 95.0(D) mm (5 × 2 1⁄4 × 3 3⁄4 inches) Mass: Approx. 265 g (0.6 lb) Supplied accessories: Connectign cable DK-415 (DC plate type) AC power cord (mains lead) DC-V700 DC Adaptor/Charger •Car battery adaptor for Lithium-ion type camcorder •Battery charger for Lithium-ion batteries: InfoLITHIUM L series (NP-F550/750/950) and NP-F100/200/220 Specifications OTHER VIDEO EQUIPMENT AND ACCESSORIES Power requirement: DC 12 V/24 V VTR mode: DC 8.4 V/2.0 A Charge mode: DC 8.4 V/1.4 A Dimensions: 127.0(W) × 54.8(H) × 95.0(D) mm (5 × 2 1⁄4 × 3 3⁄4 inches) Mass: Approx. 265 g (0.6 lb) Supplied accessory: Connectign cable DK-415 (DC plate type) –340– 4 System consoles Basic Consoles System consoles SU-450 SU-511 SU-512 SU-513 SU-514 SU-515 Double size table for RM-450/ DME-450 Unit rack Unit table Extension rack Extension table Double size table for RM-440 526 (203⁄4) SU-513 2044 (885⁄8) SU-511 SU-511 SU-514 SU-513 1010 (397⁄8) SU-512 SU-511 Rack mount metals RMM-450 For RM-450/DME-450 mounting For VO-9850/9800Type-5/9 series VTR mounting For RM-500 or RM-V5 mounting For RM-580 mounting For RM-500 (ç 2), RM-V5 (ç 2) or RM-500/RM-V5 mounting For Betamax or audio equipment mounting For Type-7/9 series VTR mounting (except VO-9850/9800) For EVO-9800/9850 mounting RMM-501 RMM-502 RMM-503 RMM-505 RMM-506 RMM-507 RMM-980 SU-515/450 1010 (397⁄8) SU-514 1050 (413⁄8) Unit: mm (inch) Weight: Approx. 37.2kg (82 lb) without VTR Weight: Approx. 116.7kg (257 lb 4 oz) 890 (351⁄8) BLP-507 1050 (413⁄8) Unit: mm (inch) 2 1 CT-501 B A A B Blank panels 1U Blank panel 2U Blank panel 3U Blank panel 1U Pad panel 2U Pad panel 6U Modification panel Blank panel OTHER VIDEO EQUIPMENT AND ACCESSORIES BLP-501 BLP-502 BLP-503 BLP-504 BLP-505 BLP-506 BLP-507 –341– 5 Connecting cables CCA-7 cables (10-pin/10-pin) CCA-7-5 : 5m (16.5 ft) CCA-7-25 : 25m (82 ft) CCA-7-50 : 50m (165 ft) CCA-7-100 : 100m (330 ft) •10-pin (male) g10-pin (female) •RM-M7G g DXC-D30/300/327B series •RM-M7G g CCU-M7/M5 •RM-M7G g CA-325A/325B CCDD-2.5 (4-pin/4-pin) •4-pin (male) g 4-pin (female), 2.5 m (8.2 ft) •SEG-2000A series g CRK-2000 CCDC cables (12-pin/4-pin) CCDC-5 : 5m (16.4 ft) CCDC-10 : 10m (33 ft) CCDC-25 : 25m (82 ft) •12-pin (female) g 4-pin (male) •DXC-LS1/107A/950/9000/390 g CMA-D2 CCDQ-06 (14-pin/4-pin) •14-pin (male) g 4-pin (male), 0.6 m (2 ft) CCDC-A cables (12-pin/4-pin) CCDC-50A : 50m (164 ft) CCDC-100A : 100m (330 ft) •12-pin (female) g 4-pin (male) •DXC-LS1/107A/950/9000/390 g CMA-D2 CCF cables (6-pin/6-pin) CCF-1 : 1m (3.3 ft) CCF-5 : 5m (16.4 ft) CCF-10 : 10m (33 ft) CCF-25 : 25m (82 ft) CCF-50 : 50m (164 ft) OTHER VIDEO EQUIPMENT AND ACCESSORIES •6-pin (male) g 6-pin (female) •SEG-2000A/2550A g WEX-2000 CCMC cables CCMC-12P02 CCMC-12P05 CCMC-12P10 CCMC-12P25 : : : : (12-pin/12-pin) 2m (6.4 ft) 5m (16.4 ft) 10m (33 ft) 25m (82 ft) •12-pin (male) g 12-pin (female) •DXC-LS1/107A/950/9000/390 g CMA-D2 CCMC-16P03/10 (16-pin/20-pin) CCMC-9DS (9-pin/4BNCs, DIN 4-pin) CCMC-16P03 : 3m (10 ft) CCMC-16P10 : 10m (33 ft) •9-pin D-sub (male) g BNCs (R/G/B/ SYNC, male), DIN 4-pin (Y/C, male) •5m (16.4 ft) •For video output from DXC-950/ 9000/390 •16-pin (female) g 20-pin (female), 10m (33 ft) •DXC-LS1 Camera Head g DXC-LS1 Camera Control Unit –342– 5 Connecting cables CCTQ-3RGB (20-pin/14-pin) •DXC-950/9000 g CCU-M5, 3m (10 ft) •It is possible to extend the cable length with CCQ-AM cable •CCQQ-1 interconnection adaptor is supplied •RGB/VBS output to CCU-M5 CCTZ-3RGB (20-pin/26-pin) •DXC-950/9000 g CCU-M5, 3m (10 ft) •CCZZ-1E interconnection adaptor is supplied •It is possible to extend the cable length with CCZ-AM cable •RGB/VBS output to CCU-M5 CCTZ-3YC (20-pin/26-pin) •DXC-950/9000 g CCU-M5, 3m (10 ft) •CCZZ-1E interconnection adaptor is supplied •It is possible to extend the cable length with CCZ-AM cable •YC/VBS output to CCU-M5 CCQ-AM cables CCQ-BRS cables (14-pin/14-pin) CCQX-3 (14-pin/XLR 4-pin) •14-pin (male) g XLR 4-pin (female), 3m (10 ft) •For external DC input to DSR300/UVW-100B, CA-537/327 from CMA-8A •14-pin (male) g 14-pin (female) •CA-327 g CCU-M5 CCXC-9DBS (9-pin/5BNCs) •9-pin D-sub (male) g BNCs (R/G/B/ SYNC/VBS) (male) •5m (16.4 ft) •For video output from DXC-H10/950/ 9000/390 CCQ-2BRS : 2m (6.4 ft) CCQ-5BRS : 5m (16.4 ft) CCQ-10BRS : 10m (33 ft) CCQ-25BRS : 25m (82.5 ft) only for projector CCQ-50BRS : 50m (165 ft) only for projector •14-pin (male) g 14-pin (female) •DXC-D30/D30WS/327B g VO-8800/CMA-8A, S-VHS VTR •VPH-G90U/G70Q/G70VRU/D50Q g PC1271 CCZ-A cables (26-pin/26-pin) CCZ-A2 : 2m (6.5 ft) CCZ-A5 : 5m (16.5 ft) CCZ-A10 : 10m (33 ft) CCZ-A25 : 25m (82 ft) CCZ-A50 : 50m (164 ft) CCZ-A100 : 100m (330 ft) •26-pin (male) g 26-pin (female) •DXC-D30/D30WS/327B series g CCU-M7/M5 •UVW-100B g BVW-50 •DXC-H10 g CMA-H10 –343– CCZQ-A cables (14-pin/26-pin) CCZQ-A2 : 2m (6.6 ft) CCZQ-A5 : 5m (16.5 ft) CCZQ-A10 : 10m (33 ft) •14-pin (male) g 26-pin (female) •CA-537, DSR-300/UVW-100B g VO8800, S-VHS VTR •CA-537 g CMA-8A OTHER VIDEO EQUIPMENT AND ACCESSORIES (14-pin/14-pin) CCQ-10AM : 10m (33 ft) CCQ-25AM : 25m (82.5 ft) CCQ-50AM : 50m (165 ft) CCQ-100AM : 100m (330 ft) 5 Connecting cables RCC-A cables (15-pin/15-pin) RCC-5A : 5 m (16 ft) RCC-11A : 10 m (33 ft) •15-pin (male) g 15-pin (female) •BVE-600 g MXP-290 •BVE-910 (with BKE-916A) g MXP-290 RCC-15FT (33-pin/33-pin) Remote control extension cable OTHER VIDEO EQUIPMENT AND ACCESSORIES •33-pin (male) g 33-pin (female), 15 m (49.2 ft) •RM-440/450/500/550/580 g All Type-5/7/9 VTRs, EVO-9800A/9850 SYC cables (4-pin/4-pin) SYC-2 : 2 m (6.4 ft) SYC-5 : 5 m (16.4 ft) •Mini DIN 4-pin (male) g Mini DIN 4-pin (female) •PVW/UVW series VTRs •DSR series VTR •SVO-5800/9600, SVP-5600/9000 •SVT-S3100 RCC-5AA cable (9-pin/15-pin) RCC-5F (33-pin/33-pin) Audio mixer control cable Remote control cable •9-pin (male) g15-pin (female), 5m (16ft) •PVE-500 g MXP-290 •33-pin (male) g 33-pin (female), 5m (16.4 ft) •RM-450/500/555/580 g All Type-5/7/9 VTRs, EVO-9800A/9850 RCC-G cables SIC-M cables (9-pin/9-pin) RCC-5G : 5 m (16 ft) RCC-10G : 10 m (33 ft) RCC-30G : 30 m (99 ft) •9-pin (male) g 9-pin (male) •PVW-2800/2650/2600, UVW-1800/ 1600, DSR-2000/85/80/70/60/40, SVO-5800, SVP-5600 g 9-pin equipped Sony machines UGC cables (BNC/BNC) UGC-1 : 1m (3.3 ft) UGC-2 : 2m (6.4 ft) UGC-5 : 5m (16.4 ft) UGC-10 : 10m (33 ft) •BNC (male) g BNC (male), 3C-2V –344– (14-pin/14-pin) SIC-M1 : 1m (3.3ft) SIC-M5 : 5m (16.4ft) SIC-M15 : 15m (49ft) SIC-M25 : 25m (82ft) SIC-M50 : 50m (164ft) •14-pin (male) g 14-pin (female) •VPH-G90U/G70Q/G70VRU/D50Q g PC-1271 VDC-5A (7-pin/7-pin) Dubbing cable •7-pin (male) g 7-pin (female), 5 m (16.4 ft) •VTRs with g VTRs with DUB connector DUB connector VCS-500 DA-500 •DA-500 g DA-500 5 Connecting cables VDC-C5 (12-pin/12-pin) VMC cables Dubbing cable VMC-3P : 3m (10 ft) VMC-5P : 5m (16.4 ft) VMC-10P : 10m (33 ft) •12-pin/12-pin, 5 m (16 ft) •PVW series VTRs •UVW-1800/1600 (8-pin/8-pin) VMC-1MQ (14-pin/8-pin) •14-pin (male) g 8-pin (male),1.5m (5 ft) •VO-6800/8800 g Monitor TV tuner •8-pin (male) g 8-pin (male) •VTR g Monitor TV tuner •TV tuner g projector VMC i.LINK cables VK-110A/120A (4-pin/4-pin) VK-305 (4-pin/4-pin) (4-pin/4-pin) VMC-IL4415: VMC-IL4435: (4-pin/6-pin) VMC-IL4615: VMC-IL4635: (6-pin/6-pin) VMC-IL6615: VMC-IL6635: VK-110A : 10m (33 ft) VK-120A : 20m (65.6 ft) •4-pin (male) g 4-pin (female), 5m (16.4 ft) •Water-resistant extention cable •SSC-530AM g SSM-721AMR 1.5 m(5 ft) 3.5 m(12 ft) 1.5 m(5 ft) 3.5 m(12 ft) •4-pin (male) g 4-pin (male) •SSC-530AM g SSM-721AMR 1.5 m(5 ft) 3.5 m(12 ft) VK-310A/318A/320A (4-pin/4-pin) Audio connecting cords VK-310A : 10m (33 ft) VK-318A : 18m (59 ft) VK-320A : 20m (65.6 ft) •4-pin (male) g 4-pin (male) •SSC-530AM g SSM-721AMR RK-5XLRF RK-5XLRF: XLR-3-11C type (female)—phono, 5m RK-5XLRM: XLR-3-12C type (male)—phono, 5m –345– OTHER VIDEO EQUIPMENT AND ACCESSORIES •DVCAM series 5 Connecting cables Cable connections DXC-D30/D30WS/ 327B with CA-327 DXC-9000 DXC-950 DXC-107A DXC-H10 CCQZ-A CCQ-BRS ---- ---- ---- ---- CCU-M7 CCZ-A ---- ---- ---- ---- ---- CCU-M5 CCQZ-A CCQ-AM CCTZ-3RGB/3YC+ CCZ-A or CCTQ-3RGB+ CCQ-AM CCTZ-3RGB/3YC+ CCZ-A or CCTQ-3RGB+ CCQ-AM ---- ---- CMA-8A CCZQ-A/ CCQX-3 CCQ-BRS/ CCQX-3 ---- ---- ---- ---- CMA-D7 ---- ---- ---- ---- CCMC-12P/UGC ---- CMA-D2 ---- ---- CCDC/CCMC-12P CCDC/CCMC-12P CCDC/CCMC-12P ---- CMA-H10 ---- ---- ---- ---- ---- CCZ-A VO-8800 or S-VHS VTR OTHER VIDEO EQUIPMENT AND ACCESSORIES Camera AC adaptor Camera control unit VTR Video camera DXC-D30/D30WS/ 327B with CA-537 –346– 6-1 Betacam SP Videocassette Tapes BCT MA Series Metal Videocassette Tapes BCT-5MA/10MA/20MA/30MA (Small cassettes) BCT-5MLA/10MLA/20MLA/30MLA/60MLA/90MLA (Large cassettes) Model Tape length m (feet) Playing time (min) Mass* g (lb.) BCT-5MA 42 (138) 6 231 (0.51) BCT-10MA 78 (256) 12 241 (0.53) BCT-20MA 150 (492) 24 256 (0.56) BCT-30MA 222 (728) 36 276 (0.61) BCT-5MLA 58 (190) 9 625 (1.38) BCT-10MLA 93 (305) 15 63 (1.39) BCT-20MLA 172 (564) 29 650 (1.43) BCT-30MLA 243 (797) 39 660 (1.45) BCT-60MLA 457 (1,499) 75 730 (1.61) BCT-90MLA 670 (2,198) 110 790 (1.74) *with case •For Betacam SP 2000PRO VTRs •Offers high C/N, low head-wear, reduced drop-outs and outstanding durability UVWT Series Metal Videocassette Tapes UVWT-10MA/20MA/30MA (Small cassettes) UVWT-60MLA/90MLA (Large cassettes) Tape length m (feet) 78 (256) 150 (492) 222 (728) 457 (1,499) 670 (2,198) Playing time (min) 12 24 36 75 110 Mass* g (lb.) 241 (0.53) 256 (0.56) 276 (0.61) 730 (1.61) 790 (1.74) OTHER VIDEO EQUIPMENT AND ACCESSORIES Model UVWT-10MA UVWT-20MA UVWT-30MA UVWT-60MLA UVWT-90MLA *With case •For Betacam SP UVW series VTRs •Offers high quality and outstanding durability –347– 6-2 DVCAM Videocassette Tape PDV-ME Series Digital Videocassette Tapes PDVM-12ME/22ME/32ME/40ME (Mini size) PDV-34ME/64ME/94ME/124ME/184ME (Standard size) Model Tape length m (feet) Recording/Playing time (min) Mass* g (lb.) PDVM-12ME 24 (79) 12 61 (0.134) PDVM-22ME 41 (135) 22 62 (0.137) PDVM-32ME 58 (190) 32 63 (0.139) PDVM-40ME 71 (233) 40 64 (0.141) PDV-34ME 61 (200) 34 124 (0.273) PDV-64ME 112 (367) 64 128 (0.282) PDV-94ME 163 (535) 94 132 (0.291) PDV-124ME 214 (702) 124 135 (0.298) PDV-184ME 315 (1,033) 184 142 (0.313) *With case •For DVCAM DSR series VTRs •High output and high reliability due to pure cobalt advanced evaporated coating with DLC (Diamond Like Carbon) protective layer •Built-in 16 kbit IC memory PDV-MEM Series Digital Videocassette Tapes (Master Tape) PDVM-32MEM/40MEM (Mini size) PDV-64MEM/124MEM/184MEM (Standard size) OTHER VIDEO EQUIPMENT AND ACCESSORIES Model Tape length m (feet) Recording/Playing time (min) Mass* g (lb.) PDVM-32MEM 58 (190) 32 PDVM-40MEM 71 (233) 40 63 (0.139) 64 (0.141) PDV-64MEM 112 (367) 64 128 (0.282) PDV-124MEM 214 (702) 124 135 (0.298) PDV-184MEM 315 (1,033) 184 142 (0.313) *With case •For DVCAM DSR series VTRs •Offers high output, lower noise, higher C/N characteristics and extremely low error rates due to Hyper Evaticle II Magnetic Partcles •Ensures superior quality even at a four times high-speed transfer mode •Built-in 16 kbit IC memory –348– 6-2 DVCAM Videocassette Tape PDV-N Series Digital Videocassette Tapes (Non IC type) PDVM-32N/40N (Mini size) PDV-64N/124N/184N (Standard size) Model Tape length m (feet) Recording/Playing time (min) 32 Mass* g (lb.) PDVM-32N 58 (190) PDVM-40N 71 (233) 40 63 (0.139) 64 (0.141) PDV-64N 112 (367) 64 128 (0.282) PDV-124N 214 (702) 124 135 (0.298) PDV-184N 315 (1,033) 184 142 (0.313) *With case •For DVCAM DSR Series VTRs •High output and high reliability due to pure cobalt advanced evaporated coating with DLC (Diamond Like Carbon) protective layer •Without IC Memory PDV-12CL/PDVM-12CL Video Head Cleaning Cassette (for DVCAM) OTHER VIDEO EQUIPMENT AND ACCESSORIES •For DVCAM DSR Series VTRs –349– 6-3 S-VHS Videocassette Tapes ST Series S-VHS Videocassette Tapes •Metal particle tape for S-VHS recording •Anti-static lid to protect the tape from dirt and dust particles for low dropouts •S-VHS mode recording can be activated via the detection holes on the back of the cassette •Rugged, pro-type album case Model name ST-30 ST-60 ST-120 Playing time* (min) 30 60 120 Tape length m (ft) 64 (210) 125 (410) 246 (807) Mass* g (lb.) 345 (0.76) 360 (0.79) 390 (0.86) OTHER VIDEO EQUIPMENT AND ACCESSORIES * Playing time = SP mode **with case –350– 7 Memory Stick™ MSA-4A/8A Memory Stick •IC memory media which is designed for the coming generation after tape and disk. •Record and store still images and other data •Transfer the data to other products easily without cables •Compact and removable •Need no mechanism •Quick access •Simple 10-pin connection Specifications OTHER VIDEO EQUIPMENT AND ACCESSORIES IC memory type: Flash memory Storage capacity: 4MB/8MB Connector type: 10-pin connector Clock speed: Max. 20 MHz Write speed: Max. 1.50 MB/s Read out speed: Max. 2.45 MB/s Power source: 2.7 V to 3.6 V Power consumption (average): Approx. 45 mA Power consumption (standby): Approx. 130 µA Dimensions: Approx. 21.5(W) × 50(H) × 2.8(D) mm (7⁄8 × 2 × 1⁄8 inches) Mass: Approx. 4 g –351– –352– OTHER VIDEO EQUIPMENT AND ACCESSORIES
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Create Date : 2000:04:13 13:42:23 Producer : Acrobat Distiller 3.0.2J (Power Macintosh 版) Author : SONY Creator : QuarkXPressª3.32: LaserWriter 8 8.5.1 Title : NTSC Sec_10/327-352 Modify Date : 2000:04:18 11:53:01+09:00 Page Count : 26 Page Mode : UseThumbs Page Layout : SinglePageEXIF Metadata provided by EXIF.tools