4695_RevBA 2_cd 4695
User Manual: 4695
Open the PDF directly: View PDF 
.
Page Count: 8
Product Data Sheet
00813-0100-4695, Rev BA
Catalog 2002 – 2003 Model 580
www.rosemount.com
• Economical and Flexible
• Accepts Thermocouple, RTD, Current,
or Voltage Input
• Front Panel Alarm Capability
• Configures Easily
Content
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page Accessories-34
Dimensional Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page Accessories-36
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page Accessories-38
Model 580 Digital Process Indicators Series
Product Data Sheet
00813-0100-4695, Rev BA
Catalog 2002 – 2003
Model 580
Accessories-32
This product data sheet discusses the features,
benefits, and specifications of Rosemount® Model
580 digital process indicators. Two types of Model
580 process indicator are available: The pressure
indicating Model 580D, and the temperature
indicating Model 580T. For information about other
Rosemount process indicators, see the Other
Rosemount Digital Process Indicators section of
this product data sheet.
Following the Rosemount Inc. philosophy of
economically tiered pressure and temperature
product lines, we now offer an economical alternative
for control room digital process indication. The Model
580 series of digital process indicators are flexible,
user-configurable units. They offer a reliable and
cost-effective solution to your digital process
indication needs, without compromising the
performance that is characteristic of other
Rosemount process indicators. In addition, these
units are always readily available for shipment.
MODEL 580D FEATURES
The Model 580D Process Indicator is a dc input
indicator that combines flexible scaling with four-digit
resolution and high accuracy. This indicator accepts
either 0–20 mA or 0–10 mV full scale input. You can
scale these ranges, or any subset (4–20 mA, 1–5 V)
of these ranges, and calibrate the indicator to display
engineering units from the dc input. The Model 580D
can be scaled to any range between –999 to 9999
using two push buttons located behind the snap-off
lens. These buttons also set zero (low), full-scale
(high), and the decimal point. In addition to flexible
scaling, the microprocessor-based Model 580D
provides excellent measurement stability, one digit
repeatability, and 0.02 percent accuracy.
Another feature of the Model 580D is its ability to
power transmitters directly through an optional,
built-in dc power supply. When Option Code E is
specified, the Model 580D provides 24 V dc at 30
mA. This power supply replaces more expensive
external power supplies and is electrically floating,
allowing it to be grounded anywhere. As shown in the
wiring diagrams on page Accessories-37, wiring the
power supply is easy because all connections
(four-wire and two-wire) are made to the removable
rear terminal block.
MODEL 580T FEATURES
The Model 580T supports 0.1° resolution for
temperature measurements below 1000°, and for
temperature measurements above 1000°, the Model
580T automatically switches to a 1° resolution.
It also supports seven thermocouple sensor types:
J, K, T, E, R, S, and B, and two 100 Ω three-wire,
Platinum RTDs, either 0.00385 or 0.00392α. Select
any one of these input types using a rotary switch
located behind the snap-off lens. A DIP switch
located in the same area enables you to display
either degrees Fahrenheit or Celsius.
MODEL 580 OPTIONS
Model 580 process indicators are rack mountable
onto standard 19-inch instrument racks, and support
either an alarm setpoint or a multiple input option. To
order either option, refer to the ordering information
table. If not ordered originally with the indicator,
either option can be installed easily in the field.
Alarm Setpoint
Easily set a single or dual alarm at any point within
the display range with the Model 580 alarm option.
Digitally set the setpoints using the two buttons on
the front panel, and specify the high or low alarm
selection by moving a jumper on the option card. If the
indicator is set to dual alarm, you must set each
alarm independently. A front panel LED clearly
illuminates to indicate alarms.
The alarm setpoint option card includes a Form C,
0.5 A relay connection for external alarms or contact
elements. For normally open or normally closed
operation, relay terminals are provided at the rear of the
indicator.
Multiple Inputs
The multiple inputs option enables a Model 580 to
receive up to six commonly scaled inputs. A rotary
switch on the front panel allows convenient selection
of the desired input type, and a removable terminal
strip promotes easy sensor wiring. In addition, both
voltage and current inputs are acceptable, however
they cannot be combined in a single unit.
Product Data Sheet
00813-0100-4695, Rev BA
Catalog 2002 – 2003
Accessories-33
Model 580
Rack Adaptor Plates
For mounting Model 580 process indicators on
standard 19-inch instrument racks, we provide
optional adaptor plates. Four types of adaptors are
available for mounting one to four indicators.
OTHER ROSEMOUNT DIGITAL
PROCESS INDICATORS
In addition to the Model 580 process indicators,
Rosemount Inc. offers the Model 751 Digital or
Analog Process Indicator. Refer to the Model 751
product data sheet, document number
00813-0100-4378.
FIGURE 1. Model 580 Process Indicators
580--73a
MODEL 580T 10-M
INDICATOR WITH 6
CHANNEL INPUT
MODEL 580D 10-A INPUT
WITH ALARM
MODEL 580T 10-A
TEMPERATURE INPUT
WITH ALARM
Product Data Sheet
00813-0100-4695, Rev BA
Catalog 2002 – 2003
Model 580
Accessories-34
Specifications
MODEL 580D SPECIFICATIONS
Functional Specifications
Repeatability
±1 count
Stability with Temperature
Zero
µ V/°C
Span
0.01% rdg/°C
Stability with Time
10 counts/year maximum
Noise Rejection
NMRR
60 dB @ 50/60 Hz, ±0.1 Hz
CMRR
120 dB @ 50/60 Hz, ±0.1 Hz with 250 Ω unbalance
Overload Protection
Power Lead to Ground
1,500 V dc or V ac rms
Across Inputs, Voltage
Up to 250 V dc or V ac for one minute, V+ to V–
Current
Up to 150 mA dc or mA ac for one minute, I+ to I–
Input Impedance
Voltage
1 MΩ
Current
5 Ω
Read Rate
2 per second nominal
Display
7-segment red/orange
LED. 0.56 in. H (14.2)
Performance Specifications
Environmental Ranges
Operating Range
40 to 110 °F (5 to 45 °C)
Storage
–40 to 150 °F (–40 to 65 °C)
Humidity
Less than or equal to 80% RH non-condensing
Alarm Relay Contact Rating
0.5 A @ 120 V ac (non-inductive load)
Form C
Power
115/230 V ac ±10%, 50/60 Hz, 400 Hz
Warranty
One year
Physical Specifications
Case Construction
One piece black plastic
Dimensions
See “Model 580 Dimensional Drawings” on page 36
Weight
1 lb. (454 g)
MODEL 580T SPECIFICATIONS
Functional Specifications
Repeatability
±1 count
Stability with Temperature
Zero
1 µ V/°C
Span
0.01% rdg/°C
Thermocouple Reference Junction, Internal, Automatic
0.03 °C/°C, 40 to 110 °F (5 to 45 °C)
Break Detection
Upscale approximately 50 nA
Product Data Sheet
00813-0100-4695, Rev BA
Catalog 2002 – 2003
Accessories-35
Model 580
Stability with Time
1°/year
Noise Rejection
NMRR
60 dB @ 50/60 Hz, ±0.1 Hz
CMRR
120 dB @ 50/60 Hz, ±0.1 Hz. with 250 Ω unbalance
Overload Protection
Power Lead to Ground
1500 V dc or V ac rms
Across Inputs, Thermocouple Model, T/C
Up to 250 V dc or V ac for one minute, V+ to V–
RTD
Up to 62 V dc or V ac for one minute, V+ to V–
Input Impedance
Thermocouple
20 MΩ, exclusive of break detect current effects
RTD
16.9 kΩ, V+ input. 16.9 kΩ, I input
RTD Lead Wire Error
at 150 µ A excitation current
40 mΩ per ohm of equal resistance in V+ and V– leads
1 Ω per ohm of unbalance in V+ and V– leads
Point Update Rate
2 per second Nominal
1° readings
1 per second nominal
0.1° readings
Display
7-segment red/orange LED 0.56 in. H (14.2)
Performance Specifications
Environmental Ranges
Operating range
40 to 110 °F (5 to 45 °C)
Storage
–40 to 150 °F (–40 to 65 °C)
Humidity
Less than or equal to 80% RH non-condensing
Multi-input Option Accuracy
Add ±0.5 °C/±1 °F to instrument accuracy specification
Alarm Relay Contact Rating
0.5 A @ 120 V ac (non-inductive load) Form C
Power
115/230 V ac ±10%, 50/60 Hz, 400 Hz
Warranty
One year
Physical Specifications
Case Construction
One piece black plastic
Dimensions
See “Model 580 Dimensional Drawings” on page 36
Weight
1 lb. (454 g)
TABLE 1. dc Range
INPUT RANGE(1) DISPLAY RANGE(1) ACCURACY
0–20 mA User scalable between –999 and 9999 0.02% rdg, ±1 count
0–10 mV User scalable between –999 and 9999 0.02% rdg, ±1 count
(1) Maximum sensitivity: 200 µ V/count; 0/4 µ A/count. Minimum sensitivity: 1 count.
TABLE 2. Thermocouple Ranges
1° RESOLUTION 1° RESOLUTION
SENSOR TYPE RANGE/DISPLAY ACCURACY (±)(1) RANGE/DISPLAY ACCURACY (±)
Iron-Constantan J –337 to 1403 °F
–205 to 762 °C
1°, +0.03%
1°, +0.03%
–99.9 to 999.9 °F
–99.9 to 761.8 °C
0.9°
0.5°
Chromel-Alumel K –331 to 2510 °F
–202 to 1377 °C
1°, +0.03%
1°, +0.03%
–99.9 to 999.9 °F
–99.9 to 999.9 °C
0.9°
0.5°
Copper-Constantan T –346 to 755 °F
–210 to 401 °C
1°, +0.03%
1°, +0.03%
–99.9 to 754.6 °F
–99.9 to 401.1 °C
0.9°
0.5°
Chromel-Constantan E –338 to 1835 °F
–205 to 1002 °C
1°, +0.03%
1°, +0.03%
–99.9 to 999.9 °F
–99.9 to 999.9 °C
0.9°
0.5°
Product Data Sheet
00813-0100-4695, Rev BA
Catalog 2002 – 2003
Model 580
Accessories-36
Dimensional Drawings
Platinum- Platinum 13%, Rhodium R 32 to 3216 °F
0 to 1769 °C
1°, +0.05%
1°, +0.05%
Platinum- Platinum 10%, Rhodium S 32 to 3218 °F
0 to 1770 °C
1°, +0.05%
1°, +0.05%
Platinum 30%, Rhodium- Platinum 6%,
Rhodium B
601 to 3325 °F
316 to 1829 °C
1°, +0.05%
1°, +0.05%
(1) Accuracy percentage is of reading, ±1 digit.
TABLE 3. RTD Range
1° RESOLUTION 1° RESOLUTION
SENSOR TYPE RANGE/DISPLAY ACCURACY (±)(1) RANGE/DISPLAY ACCURACY (±)
Platinum 100 Ω–329 to 1585 °F 1°, +0.03% –99.9 to 999.9 °F 0.9°
3-wire α 0.00385 –200 to 863 °C 1°, +0.03% –99.9 to 862.6 °C 0.5°
Platinum 100 Ω–332 to 1563 °F 1°, +0.03% –99.9 to 999.9 °F 0.9°
3-wire α 0.00392 –202 to 851 °C 1°, +0.03% –99.9 to 850.8 °C 0.5°
(1) Accuracy percentage is of reading, ±1 digit.
Model 580 Dimensional Drawings
TABLE 2. Thermocouple Ranges
1° RESOLUTION 1° RESOLUTION
SENSOR TYPE RANGE/DISPLAY ACCURACY (±)(1) RANGE/DISPLAY ACCURACY (±)
PANEL CUTOUT DIMENSIONS
½ DIN STANDARD
FACE DIMENSIONS
SIDE DIMENSIONS
TOP DIMENSIONS
3.62
(92)
1.77
(45)
0.27
(7) 4.92
(125) 0.38
(95)
1.69
(43)
5.63
(143)
3.44
(87)
3.72
(94)
1.89
(48)
3.72
(94)
0.94(1)
(24)
2
(51)
NOTE
Dimensions are in inches (millimeters).
(1) Character height is 0.56 (14.2).
580 Series
580-0090A, 0091A, 0093A, 0092A
Product Data Sheet
00813-0100-4695, Rev BA
Catalog 2002 – 2003
Accessories-37
Model 580
Models 580D and 580T Wiring Diagrams
4- and 2-Wire Excitation Wiring Diagrams
+V –V
V dc
+–
mA dc
30 mA @ 24 V dc
Excitation
+–
ac Power
Neutral
(White)
Gnd
(Green)
Hot
(Black)
+–
Neutral
(White)
Gnd
(Green)
Hot
(Black)
ac Power
T/C
RTD
MODEL 580D MODEL 580T
580-0086A, 0089A
4-WIRE MODE 2-WIRE CURRENT LOOP MODE
+V –V + I– I + –
ac Power
Voltage
Input Current
Input 30 mA @
24 V dc Excitation
Line Gnd Neu
ac Power
Line Gnd Neu
Jumper
– Power
Supply
+ Power
Supply
From
Transducer/Transmitter
To
Transducer/Transmitter
580-0094A, 0095A
Product Data Sheet
00813-0100-4695, Rev BA
Catalog 2002 – 2003 Model 580
Emerson Process Management
© 2002 Rosemount Inc. All rights reserved.
¢00813-0100-4695u¤
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.
PlantWeb is a registered trademark of one of the Emerson Process Management group of companies.
All other marks are the property of their respective owners.
Rosemount Inc.
8200 Market Boulevard
Chanhassen, MN 55317 USA
T (U.S.) 1-800-999-9307
T (International) (952) 906-8888
F (952) 949-7001
www.rosemount.com
Fisher-Rosemount GmbH & Co.
Shipping Address:
Argelsrieder Feld 3
82234 Wessling
Germany
Tel 49 (8153) 9390
Fax 49 (8153) 939172
Fisher-Rosemount Singapore Pte Ltd.
1 Pandan Crescent
Singapore 128461
Tel (65) 777-8211
Fax (65) 777-0947
AP.RMT-Specialist@emersonprocess.com
Ordering Information
Spare Parts List
Model Product Description
580 Digital Process Indicator
Code Input
D dc Input
TTemperature Sensor Input
Code Line Voltage
10 Set for 115 V ac
20 Set for 230 V ac
Code Options
ASingle Alarm
BDual Alarm
MSix Channel Selection
E30 mA @ 24 V dc Excitation (Model 580D only)
Typical Model Number: 580 D 10 A
Part Number Description
R580D-HBK1 Owner’s Manual
R580T-HBK1 Owner’s Manual
RKS1 19-in. Rack Mount Adapter
RKS2 19-in. Rack Mount Adapter
RKS3 19-in. Rack Mount Adapter
RKS4 19-in. Rack Mount Adapter
