F Series Centro Matic

User Manual: F-Series

Open the PDF directly: View PDF PDF.
Page Count: 64

DownloadF-Series Centro-Matic
Open PDF In BrowserView PDF
Lincoln Centro-Matic
automatic lubrication
systems

People, capabilities and systems to save
money and increase productivity
We’re the largest and most successful
company in our field because we continually satisfy our customers with the world’s
best lubrication and pumping systems.
For more than a century, companies have
relied on our technical and quality leadership, our world-class manufacturing and
customer service, and our vast network
of distributors and support facilities.
Lincoln develops new products and
systems at research and development
facilities in the U.S., Germany and India
that provide global and regional application solutions.
We have solutions for large processing
plants, automotive manufacturing, pulp
and paper mills, and food and beverage
facilities. Virtually every industrial
professional involved in operations
and maintenance can benefit from
Lincoln systems.
On the road or in the field, Lincoln protects heavy equipment used in mining,
construction, agriculture and over-theroad trucking. The world’s leading
manufacturers offer our systems as
standard equipment or factory options.
Lincoln builds precision metal components, state-of-the-art electronic controls, and the industry’s top-performing
pump systems. Our quality systems in the
United States and Germany are ISO 9001
registered.
With five technical support centers on
three continents, and a network of
systems houses and distributors supported by regional sales and service offices,
our customers can always draw on our
worldwide resources.
To make sure your investment results in
significant savings, Lincoln developed a
unique program called BearingSaver®.
You not only get a complete audit of your
facility, you also receive an analysis of
your return on investment.

Centro-Matic® Automatic Lubrication Systems
Table of Contents
Introduction to Centro-Matic®  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Grease Injectors  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Oil Injectors .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  12
Metric Injectors .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  16
Injector Accessories .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  17
FlowMaster® II Pump .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  19
Reservoir Level Sensor, Overflow Prevention System .  .  .  .  21
Hydraulic Lubrication Systems - Hammer Pumps .  .  .  .  .  .  23
P653S Electric Pump .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  25
P603S Pump .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 28
Manual Grease Pumps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  30
Air-Operated (Single Stroke) Grease Pumps .  .  .  .  .  .  .  .  .  31
Air-Operated (Reciprocating) Grease Pumps  .  .  .  .  .  .  .  .  . 33
Electric Grease Pumps  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 35
Manually Operated Oil Pumps  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 35
Air-Operated (Single Stroke) Oil Pumps .  .  .  .  .  .  .  .  .  .  .  . 36
Air-Operated (Reciprocating) Oil Pumps .  .  .  .  .  .  .  .  .  .  .  37
Electric-Operated Oil Pumps  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  38
Bucket Pumps  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  39
FlowMaster® Hydraulic Pump .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  40
FlowMaster® Electric Pumps .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 42
Hydraulic-Powered Grease Pumps .  .  .  .  .  .  .  .  .  .  .  .  .  .  46
Airless Spray System  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 47
Pump Accessories .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  49
System Controls  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  52
Numerical Index .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 57

1

Centro-Matic® Automatic Lubrication Systems
Introduction
Lincoln Centro-Matic® systems and components are made to match your application. Systems can service one machine, different zones on one machine or even several separate machines. Regardless of the application, the principle
of centralized lubrication remains the same: a central pump station automatically delivers lubricant through a single
supply line to the injectors. Each injector serves only one lubrication point and may be accurately adjusted to deliver
the precise amount of grease or oil required. Centro-Matic systems give you multiple advantages over other designs.

Simplicity
Systems are easy to understand, install and maintain. You realize savings right from the start because one lubricant
supply line means lower installation costs.

Powerful Pumping Unit
Centro-Matic systems dispense either grease or oil in measured quantities, unaffected by normal temperature or
viscosity changes. For large systems, Lincoln’s single-line design and powerful pumps mean injectors can be located
long distances from original refinery containers or bulk lubricant tanks.

External Adjustment
Lubricant injectors are externally adjustable without special tools so each bearing can receive the correct amount of
lubricant. No under- or over-lubrication at individual points.

Visual Indicators
Each injector incorporates an indicator pin that gives visual confirmation the injector is operating correctly. When
necessary, troubleshooting is the simple process of checking indicator pins.

Ease of Service
When injectors finally need service, the job is quick and easy. No need to remove supply line connections or disturb
adjacent injectors. Replacement can usually be done between lubrication cycles, so there’s almost no lubricant loss
or downtime.

Parts and Service
You’re never far from a Lincoln authorized distributor. Qualified distributors offer design engineering, startup help and
training for your personnel in the use and maintenance of Centro-Matic systems. They’ll back you up with parts and
service for years after the sale.

Air-Operated

Electric

Actuated automatically by
compressed air at various
pre-determined intervals.
An air-operated pump
delivers lubricant to the
injectors. When all injectors
have cycled, the pump
shuts
off automatically and vents
lubricant pressure. Available
with automatic, manual or
mechanical controls.

Used where compressed air
is not available, or electrical operation is preferred.
Totally
enclosed motor supplies the
power requirements of the
pumping mechanism. Time
control is adjustable to
provide predetermined
frequency of lubrication.

Manual
Designed for smaller,
individual machines, manual
systems provide a low-cost,
efficient method of distributing lubricant to the injectors.
Cycling a complete bank of
injectors takes only a few
seconds. In manually
operated systems, the
lubricant pump is handoperated and the machine
operator performs the
lubrication intervals.

2

Hydraulic
A complete hydraulicallypowered pumping unit for
centralized lubrication of
individual machines. Usually
installed on machinery such
as coal mining and earth
moving equipment which
utilize a hydraulic pressure
system. The frequency of
the lubrication cycle can be
set manually or by mechanical or automatic controls.

Centro-Matic® Automatic Lubrication Systems
Introduction
Basic Operating Principles of Centro-Matic® Injectors
Each Lincoln Centro-Matic injector can be manually adjusted to discharge the precise amount of lubricant each
bearing needs. Injectors are mounted singly at each bearing, or grouped in a manifold with feedlines supplying
lubricant to the bearings. In each case, injectors are supplied with lubricant under pump pressure through a single
supply line. Two injector types are available: a top adjusting and a side adjusting. Both types can be used in the
same circuit; their selection is made on the basis of bearing lubricant requirements.

Indicator
Stem

Discharge
Chamber

Indicator
Stem

Indicator
Stem

Discharge
Chamber

Measuring
Piston

Discharge
Chamber
Measuring
Piston

Measuring
Piston

Slide
Valve

Slide
Valve

Slide
Valve

Stage 1

Stage 2

Indicator
Stem

Discharge
Chamber
Measuring
Piston

Slide
Valve

Stage 3

Stage 4

SL-V, SL-V XL
Stage 1—The discharge chamber is filled with lubricant from the previous cycle. Under pressure of incoming lubricant, lubricant is directed to both sides of the measuring piston through the slide valve. The port to the bearing is
closed in this position which prevents the measuring piston from moving. The indicator stem will be at its innermost
position, having pulled away from the stop in the adjusting screw.
Stage 2—Pressure has built up and has moved the slide valve in position shown. This closes the flow passage to the
upper side of the piston (larger diameter) while simultaneously opening the port to allow lubricant to flow out of the
injector to the bearing. Pressure from the supply line continues to apply pressure to the lower portion of the measuring piston, which causes a pressure difference across the measuring piston thus allowing it to move upward.
Stage 3—Movement of the measuring piston is shown caused by the pressure on the lower side of the measuring
piston dispensing lubricant out to the bearing. The indicator stem will move up against the stop in the adjusting screw
when all lubricant has been delivered to the bearing.
Stage 4—As the pressure in the supply line is vented down to 1,000 psi, the slide valve moves back to its rest position. Flow of lubricant to the bearing is closed and simultaneously allows lubricant to flow to the upper (larger diameter) of the piston. The displacement of fluid on the lower side of the measuring chamber is also allowed by the slide
valve to flow to the upper side of the piston. The injector is recharged by the residual pressure in the supply line to the
upper portion of the measuring chamber.

3

Centro-Matic® Automatic Lubrication Systems
Introduction
Indicator
Stem

Injector
Piston

Injector
Piston

Measuring
Chamber

Discharge
Chamber
Outlet
Port

Slide
Valve

Discharge
Chamber

Slide
Valve

Passage

Passage
Lubricant
Supply Inlet

Stage 1

Stage 2

Stage 3

Stage 4

SL-1, -11, -41, -44
Stage 1—The injector piston is in its normal, or rest position. The discharge chamber is filled with lubricant from
the previous cycle. Under the pressure of incoming lubricant, the slide valve is about to open the passage leading
to the piston.
Stage 2—When the slide valve uncovers the passage, lubricant is admitted to the top of the piston, forcing the
piston down. The piston forces lubricant from the discharge chamber through the outlet port to the bearing.
Stage 3—As the piston completes its stroke, it pushes the slide valve past the passage, cutting off further
admission of lubricant to the passage. Piston and slide valve remain in this position until lubricant pressure
in the supply line is vented (relieved) at the pump.
Stage 4—After pressure is relieved, the compressed spring moves the slide valve to the closed position. This
opens the port from the measuring chamber and permits the lubricant to be transferred from the top of the piston
to the discharge chamber.

SL-32, -33, -42, -43
Stage 1—Incoming lubricant, under pressure from the
supply line, moves the injector piston forward. The piston forces a pre-charge of lubricant from the discharge
chamber through the outlet check valve to the feed line.

Outlet
Check
Valve

Measuring
Chamber
Lock
Nut

Stage 2—When the system is vented (pressure relieved),
the piston returns to the rest position, transferring lubricant
from the measuring chamber to the discharge chamber.
Applications—When it comes to eliminating costly,
manual point-by-point lubrication, Centro-Matic systems
have proven to be the right solution for many industries
and applications. Examples include:
• Paper Converting
• Plastic Processing
• Wood Processing

• Printing
• Packaging
• Textile

• Food & Beverage
• Metalworking
• Material Handling
Equipment

Discharge
Chamber

Adjusting
Nut
Indicator
Stem
Injector
Piston

Lubricant
Supply
Inlet

Stage 1
4

Stage 2

Centro-Matic® Automatic Lubrication Systems
Grease Injectors
Series SL-33

• For single-line, high-pressure central lubrication system.
• For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.
• Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel
or in industries preferring stainless steel.

Specifications:
Series
SL-33

Output

Operating Pressure

Min.

Max.

Min.

Max.

Typical

Vent

.001 cu. in.
.016 cc

.003 cu. in.
.049 cc

1200 psig
83 bar

3500 psig
241 bar

1500 psig
103 bar

200 psig
14 bar

Model
Carbon Steel

Stainless Steel
(304)

Number
of
Outlets

83309-1

83715-1

83309-2
83309-3
83309-4

Connections

Dimensions
A
in.

A
mm

B
in.

B
mm

1

1⅛

29

1⅝

41

83715-2

2

1⅞

48

2⅜

60

83715-3

3

2⅝

67

3⅛

79

83715-4

4

3⅜

86

3⅞

98

4⅛

105

4⅝

117

4⅞

124

5⅜

137

143

6⅛

156

83309-5

—

5

83309-6

83715-6

6

Manifold Inlet

Injector Outlet

⅛" NPTF (F)
⅛" O.D. Tube

5⅝

—

83715-7

7

83900

83900-9

1

⅛" NPTF (M)

Single Injector/No Manifold

83314

83314-9

—

—

Single Replacement Injector

Notes:
1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing — 1/8" O.D. as standard.
Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Injectors have Nitrile packings (200°F max. / 93°C). Check packing compatibility with synthetic lubricants.
4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with two turns at .001 cu. in./turn.

5

Centro-Matic® Automatic Lubrication Systems
Grease Injectors
Series SL-32

• For single-line, high-pressure central lubrication system.
• For dispensing petroleum-based lubricants with a viscosity up to NLGI No.2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-33, SL-V, SL-V XL, SL-1 and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.
• Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel
or in industries preferring stainless steel.

Specifications:
Output

Series
SL-32

Operating Pressure

Min.

Max.

Min.

Max.

Typical

Vent

.001 cu. in.
.016 cc

.008 cu. in.
.131 cc

1200 psig
83 bar

3500 psig
241 bar

1500 psig
103 bar

200 psig
14 bar

Model

Number of
Outlets

Carbon Steel

Stainless Steel
(304)

83336-1

83724-1

1

83336-2

83724-2

2

83336-3

83724-3

3

83336-4

83724-4

4

Connections
Manifold Inlet

Injector
Outlet

¼" NPTF (F)
⅛" O.D. Tube

Dimensions
A
in.

A
mm

B
in.

B
mm

1¼

32

1¾

44

2

51

2½

63

2¾

70

3¼

82

3½

89

4

101

83338

—

1

¼" NPTF (M)

Single Injector/No Manifold

83337

83337-9

—

—

Single Replacement Injector

Notes:
1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing — 1/8" O.D. as standard.
Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Injectors have Nitrile packings (200°F max. / 93°C). Check packing compatibility with synthetic lubricants.
4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with five turns at .0014 cu. in./turn.

6

Centro-Matic® Automatic Lubrication Systems
Grease Injectors
Series SL-32HV High Venting - NEW

• For single-line, high-pressure central lubrication system.
• For dispensing petroleum-based lubricants with a viscosity up to NLGI No.2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-33, SL-V, SL-V XL, SL-1 and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.

Specifications:
Output

Series
SL-32HV

Operating Pressure

Min.

Max.

Min.

Max.

Typical

Vent

.001 cu. in.
.016 cc

.008 cu. in.
.131 cc

1200 psig
83 bar

3500 psig
241 bar

1500 psig
103 bar

400 psig
28 bar

Model
Carbon Steel

Number of
Outlets

83336HV-1

1

Connections
Manifold Inlet

Injector Outlet

Dimensions
A
in.

A
mm

B
in.

B
mm

1¼

32

1¾

44

83336HV-2

2

2

51

2½

63

83336HV-3

3

2¾

70

3¼

82

83336HV-4

4

3½

89

4

101

83336HV-5

5

4¼

108

4¾

120

83336HV-6

6

5

127

5½

139

¼" NPTF (F)
⅛" O.D. Tube

83336HV-7

7

5¾

146

6¼

158

83336HV-8

8

6½

165

7

177

83336HV-9

9

7¼

184

7¾

196

83336HV-10

10

8

203

8½

215

83338HV

1

¼" NPTF (M)

Single Injector/No Manifold

83337HV

—

—

Single Replacement Injector

Notes:
1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing — 1/8" O.D. as standard.
Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Injectors have Nitrile packings (200°F max. / 93°C). Check packing compatibility with synthetic lubricants.
4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with five turns at .0014 cu. in./turn.

7

Centro-Matic® Automatic Lubrication Systems
Grease Injectors
Series SL-V

1¼"
(32mm)
⅛"
NPTF

8¾"
(222mm)
⅜"
(19mm)

13/32" (10.3mm)
Mounting
Holes

2⅛"
(54mm)

1½"
(38mm)

⅜" NPTF
(both ends)

1⅜"
(35mm)

A
B

• For single-line, high-pressure central lubrication system.
• For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-32, SL-33, SL-1, SL-V XL and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.
• Each SL-V injector includes a clear polycarbonate protective cap.

Specifications:
Output
Series

Material

SL-V

Carbon
Steel

Operating Pressure

Connections

Min.

Max.

Min.

Max.

Typical

Vent

Manifold
Inlet

Injector
Outlet

0.015 cu. in.
0.25 cc

0.08 cu. in.
1.31 cc

1850 psig
128 bar

6000 psig
413 bar

2500 psig
172 bar

1000 psig
60 bar

⅜" NPTF (F)

⅛" NPTF (F)

Dimension
Model

Type

Number of Outlets

A
in.

A
mm

B
in.

B
mm

2½

63

85770-1

One Injector Manifold

1

85770-2

Two Injector Manifold

2

3

76

85770-3

Three Injector Manifold

3

1¼

32

4¼

108

85770-4

Four Injector Manifold

4

2½

63

5½

140

85770-5

Five Injector Manifold

5

3¾

95

6¾

171

85770-6

Six Injector Manifold

6

5

127

8

203

85771

Replacement for manifold injectors

85772

Single injector/no manifold (⅜" NPTF(M) inlet)

Single Mounting Hole

Notes:
1. Injector manifolds have 13⁄32" (10.3 mm) dia. mounting holes for 3⁄8" bolt.
2. Injectors have polyurethane seals Check compatibility with synthetic lubricants.
3. Injector rated for 180°F (80°C) max. ambient temperature, depending on lubricant used.
4. Injectors include fitting for filling feedlines via alternate outlet port.
5. Output with adjustment screw hand-tightened is .015 cu. in. Maximum output is achieved with five turns at .014 cu. in./turn.

8

Centro-Matic® Automatic Lubrication Systems
Grease Injectors
Series SL-V XL
High-Output

1¼"
(32mm)
113⁄16"
(284mm)
⅛"
NPTF

¾"
(19mm)

13/32" (10.3mm)
Mounting Holes

2⅛"
(54mm)

⅜" NPTF
(both ends)

1½"
(38mm)

A
B

1⅜"
(35mm)

• For single-line, high-pressure central lubrication system.
• For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-32, SL-33, SL-1, SL-V and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.
• Two SL-V XL injectors are required to replace one SL-11 injector.
• Each SL-V XL injector includes a clear polycarbonate protective cap.

Specifications:
Series

Material

SL-V XL

Carbon
Steel

Model

Output

Operating Pressure

Connections

Min.

Max.

Min.

Max.

Typical

Vent

Manifold Inlet

Injector Outlet

0.015 cu. in.
0.25 cc

0.305 cu. in.
5.00 cc

1850 psig
128 bar

6000 psig
413 bar

2500 psig
172 bar

1000 psig
69 bar

⅜" NPTF (F)

⅛" NPTF (F)

Number of
Outlets

Type

A
in.

A
mm

B
in.

B
mm

2½

63

3

76

85780-1

One Injector Manifold

1

85780-2

Two Injector Manifold

2

85780-3

Three Injector Manifold

3

1¼

32

4¼

108

85780-4

Four Injector Manifold

4

2½

63

5½

140

85780-5

Five Injector Manifold

5

3¾

95

6¾

171

85780-6

Six Injector Manifold

6

5

127

8

203

85781

Replacement for manifold injectors

85782

Single injector/no manifold (⅜" NPTF(M) inlet)

Single Mounting Hole

Spectrum Adjustment Sleeves:
Model Number
(10/bag only)

Output
in³ (cc)

Ratio from
Maximum Output

Ratio from
Minimum Output

Sleeve
Color

N/A

0.015 (0.25)

0.05

1

NA

85785-1

0.030 (0.50)

0.10

2

red

85785-2

0.045 (0.75)

0.15

3

silver

85785-3

0.060 (1.00)

0.20

4

gold

85785-4

0.075 (1.25)

0.25

5

green

85785-5

0.113 (1.88)

0.37

7.5

black

85785-6

0.150 (2.50)

0.50

10

purple

85785-7

0.188 (3.13)

0.62

12.5

blue

85785-8

0.225 (3.75)

0.75

15

orange

85785-9

0.263 (4.38)

0.87

17.5

brown

85785-10

0.300 (5.00)

1.00

20

yellow

9

Notes:
1. Injector manifolds have 13/32"
(10.3 mm) dia.mounting holes
for 3/8" bolt.
2. Injectors have polyurethane seals
Check compatibility with synthetic
lubricants.
3. Injector rated for 180°F (80°C) max.
ambient temperature, depending on
lubricant used.
4. Injectors include fitting for filling
feedlines via alternate outlet port.
5. Output with adjustment screw
handtightened is .015 cu. in.
Maximum output is achieved with
20½ turns at .014 cu. in./turn.

Centro-Matic® Automatic Lubrication Systems
Grease Injectors
Series SL-1

• For single-line, high-pressure central lubrication system.
• For dispensing lubricants compatible with flouroelastomer packings and viscosity up to NLGI No. 2
(refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-32, SL-33, SL-V, SL-V XL and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.
• Available in stainless steel SAE 316, for application where environmental conditions are hazardous to carbon steel or
in industries preferring stainless steel.

Specifications:
Output

Series
SL-1

Operating Pressure

Connections

Min.

Max.

Min.

Max.

Typical

Vent

Manifold Inlet

Injector Outlet

.008 cu. in.
.131 cc

.080 cu. in.
1.31 cc

1850 psig
127 bar

3500 psig
241 bar

2500 psig
172 bar

600 psig
41 bar

⅜" NPTF (F)

⅛" NPTF (F)

Model
Carbon Steel

Stainless Steel 316)

Number of
Outlets

Dimensions
A
in.

A
mm

B
in.

B
mm

2½

63

3

76

81770-1

239351* One Injector Manifold

1

81770-2

239352* Two Injector Manifold

2

81770-3

239353* Three Injector Manifold

3

1¼

32

4¼

108

81770-4

239354* Four Injector Manifold

4

2½

63

5½

140

81770-5

239355* Five Injector Manifold

5

3¾

95

6¾

171

81770-6

—

6

5

23

8

203

81713

—

Single injector/no manifold, [ ⅜" NPTF (M) inlet]

81713A

84776* Injector

Replacement for manifolded injectors

Single Mounting Hole

* For complete assembly, you must order stainless steel manifold and corresponding quantity of Model #84776 Injectors separately.

Notes:
1. Injector manifolds have 13/32" (10.3mm) dia.mounting holes for 3/8" bolt.
2. Injectors have flouroelastomer packings. Check compatibility with synthetic lubricants.
3. Injector rated for 350°F (176°C) max. ambient temperature, depending on lubricant used.
4. Injectors include fitting for filling feedlines via alternate outlet port.
5. Output with adjustment screw hand-tightened is .009 cu. in. Maximum output is achieved with eight turns at .009 cu. in./turn.

10

Centro-Matic® Automatic Lubrication Systems
Grease Injectors
Series SL-11

• For single-line, high-pressure central lubrication system.
• For dispensing lubricants compatible with flouroelastomer packings and viscosity up to NLGI No. 2
(refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-32, SL-33, SL-V, SL-V XL and/or SL-1.
• Available only as single unit with ½" NPTF Female inlet.

Specifications:
Series
SL-11

Output

Operating Pressure

Min.

Max.

Min.

Max.

Typical

Vent

.050 cu. in.
.82 cc

.500 cu. in.
8.2 cc

1000 psig
69 bar

3500 psig
241 bar

2500 psig
172 bar

800 psig
55 bar

Carbon Steel

Number of Outlets

85497

1

Connections
Inlet

Outlet

½" NPTF (F)

¼" NPTF (F)

Notes:
1. Injectors have flouroelastomer packings. Check packing compatibility with synthetic lubricants.
2. Injector rated for 350°F (176°C) max. ambient temperature.
3. Injectors supplied with fitting for filling feed line via alternate outlet port.
4. Output with adjustment screw hand-tightened is .05 cu. in. Maximum output is achieved with 11½ turns at .040 cu. in./turn.

11

Centro-Matic® Automatic Lubrication Systems
Oil Injectors
Series SL-42

• For single-line central lubrication system.
• For dispensing fluid or semi-fluid lubricants.
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-43, SL-41 and/or SL-44.
• Individual injectors can be easily removed for inspection or replacement.
• Carbon steel injectors with Nitrile or flouroelastomer packings.
• Injectors with flouroelastomer packings are used for heat resistant applications or when lubricant to be dispensed
requires flouroelastomer packings for compatibility (indicated by black adjustment caps).

Specifications:
Output

Series
SL-42

Operating Pressure

Min.

Max.

Min.

Max.

Typical

Vent

.001 cu. in.
.016 cc

.003 cu. in.
.049 cc

750 psig
52 bar

1000 psig
69 bar

850 psig
59 bar

150 psig
10 bar

Model
Standard

Heat Resistant

Number of
Outlets

83311-1

84428-1

83311-2

84428-2

83311-3

84428-3

83311-4
83311-5

84428-4
84428-5

Connections
A
in.

A
mm

B
in.

B
mm

1

1⅛

29

1⅝

41

2

1⅞

48

2⅜

60

3

2⅝

67

3⅛

79

4

3⅜

86

3⅞

98

4⅛

105

4⅝

117

4⅞

124

5⅜

137

7⅞

200

8⅜

213

295

12⅛

308

5

Manifold/
Injector Inlet

⅛" NPTF (F)

Injector
Outlet

Dimensions

⅛" O.D.
Tube
Connection

83311-6

84428-6

6

83311-10

84428-10

10

83311-15

84428-15

15

83535

—

1

⅛" NPTF (M)

Single Injector/No Manifold

83313

84048

—

—

Replacement for Manifold Injectors

11⅞

Notes:
1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing – 1/8" O.D. as standard.
Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Standard injectors have Nitrile packings (200°F/93°C max.); Heat Resistant injectors have flouroelastomer packings (350°F/176°C max.,
depending on lubricant used) and black adjusting cap. Check packing compatibility with synthetic lubricants.
4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with two turns at .001 cu. in./turn.

12

Centro-Matic® Automatic Lubrication Systems
Oil Injectors
Series SL-43

• For single-line central lubrication system.
• For dispensing fluids or semi-fluid lubricants.
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-42, SL-41 and/or SL-44.
• Individual injectors can be easily removed for inspection or replacement.
• Carbon steel injectors with Nitrile or flouroelastomer packings.
• Injectors with flouroelastomer packings are used for heat resistant applications or when lubricant to be dispensed
requires flouroelastomer packings for compatibility (indicated by black adjustment caps).

Specifications:
Output

Series
SL-43

Operating Pressure

Min.

Max.

Min.

Max.

Typical

Vent

.001 cu. in.
.016 cc

.008 cu. in.
.131 cc

750 psig
52 bar

1000 psig
69 bar

850 psig
59 bar

150 psig
10 bar

Model
Carbon Steel

Number of
Outlets

Connections
Manifold/
Injector Inlet

Injector
Outlet

Dimensions
A
in.

A
mm

B
in.

B
mm

32

1¾

44

51

2½

63

Standard

Heat Resistant

83661-1

84429-1

1

1¼

83661-2

84429-2

2

2

83661-3

84429-3

3

2¾

70

3¼

83

83661-4

84429-4

4

3½

89

4

102

83660

84110

—

¼" NPTF (F)

—

⅛" O.D. Tube
Connection

Replacement for Manifold Injectors

Notes:
1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing – 1/8" O.D. as standard.
Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Standard injectors have Nitrile packings (200°F/93°C max.)
4. Heat Resistant injectors have flouroelastomer packings (350°F/176°C max. depending on lubricant used) and Black Adjusting Cap.
5. Check packing compatibility with synthetic lubricants.
6. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with five turns at .0014 cu. in./turn.

13

Centro-Matic® Automatic Lubrication Systems
Oil Injectors
Series SL-41

• SL-41 series injectors are designed for use in high temperature applications up to 350°F (176°C),
depending on lubricant.
• Available installed only in manifolds with ⅜" NPT female inlet.
• Injectors feature a tamper-resistant adjustment screw which does not incorporate a visual indicator.
• May be combined in a circuit of injectors SL-42, SL-43 and SL-44.

Specifications:
Series
SL-41

Model

Output

Operating Pressure

Min.

Max.

Min.

Max.

Typical

Vent

.008 cu. in.
.131 cc

.080 cu. in.
1.31 cc

750 psig
52 bar

1000 psig
69 bar

850 psig
59 bar

150 psig
10 bar

Carbon Steel

Number of
Outlets

82294-1

1

82294-2

2

82294-3

3

82294-4

4

82294-5

5

Connections
Manifold/
Injector Inlet

⅜" NPTF (F)

82292
82295

Dimensions

Injector
Outlet

⅛" NPTF (F)

A
in.

A
mm

B
in.

B
mm

Single Hole
Mounting

Single Hole
Mounting

2½

63

3

76

1¼

32

4¼

108

2½

63

5½

140

3¾

95

6¾

171

Single Injector/No Manifold, [⅜" NPTF (M) Inlet]
—

—

⅛" NPTF (F)

Replacement for Manifold Injectors

Notes:
1. Injector manifolds have 13/32" (10.3 mm) mounting holes for 3/8" bolt.
2. Output with adjustment screw hand-tightened is .008 cu. in. Maximum output is achieved with 12 turns at .006 cu. in./turn.

14

Centro-Matic® Automatic Lubrication Systems
Oil Injectors
Series SL-44

• For single-line central lubrication system.
• For dispensing fluid or semi-fluid lubricants.
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-43, SL-41 and/or SL-42.
• Individual injectors can be easily removed for inspection or replacement.
• Carbon steel injectors with flouroelastomer packings.

Specifications:
Series
SL-44

Model
Carbon
Steel

Output

Operating Pressure

Min.

Max.

Min.

Max.

Typical

Vent

.008 cu. in.
.131 cc

.080 cu. in.
1.31 cc

750 psig
52 bar

1000 psig
69 bar

850 psig
59 bar

150 psig
10 bar

Number of
Outlets

83749-1

1

83749-2

2

83749-3

3

83749-4
83749-5
83748

1

Connections
Manifold Inlet

Dimensions

Injector
Outlet

A
in.

A
mm

Single Hole Mounting

B
in.

B
mm

2½

63

3

76

1¼

32

4¼

108

4

2½

63

5½

140

5

3¾

95

6¾

171

⅜" NPTF (F)

—

⅛" NPTF (F)

—

Replacement for Manifold Injectors

Notes:
1. Injector manifolds have 13/32" mounting holes for 3/8" bolt.
2. Injectors have flouroelastomer packings. Check packing compatibility with synthetic lubricants.
3. Injectors rated at 350°F (176°C) maximum ambient temperature, depending on lubricant used.
4. Output with adjustment screw hand-tightened is .009 cu. in. Maximum output is achieved with eight turns at .009 cu. in./turn.

15

Centro-Matic® Automatic Lubrication Systems
Metric Injectors
Series SL-32, 33 and 42 Metric

SL-32 Series

SL-33, 42 Series

With the same proven design as our U.S. standard injectors, the new metric versions of our popular small grease and
oil injectors feature metric ports. Any surface that needs a wrench is metric. It's more convenient for customers in
most of the world, and easier to maintain because there's no need for a second set of wrenches or adapters.
• Offered for international customers.
• Metric ports connect with metric lines without adapters.
• No need for a second set of tools.
• Proven design used in the United States.
• Models for both grease and oil.

Specifications:
Model
Oil
SL-42

Grease
SL-33

85352-1

85351-1

85352-2

Connections
Grease
SL-32

Dimensions

Outlets

A
in.

A
mm

B
in.

B
mm

1

1⅛

29

1⅝

41

85351-2

2

1⅞

48

2⅜

60

85352-3

85351-3

3

2⅝

67

3⅛

79

85352-4

85351-4

4

3⅜

86

3⅞

98

85352-5

85351-5

5

4⅛

105

4⅝

118

4⅞

124

5⅜

137

Inlet

⅛ BSPP(F)
85352-6

85351-6

6

Outlet

6 mm
O.D. Tube
Connection

85353-1

1

1¼

32

1¾

44

85353-2

2

2

51

2½

64

85353-3

3

2¾

70

3¼

83

85353-4

4

3½

89

4

102

16

Centro-Matic® Automatic Lubrication Systems
Injector Accessories
Injector Connector Tube
Permits application of combined discharge of two or more Series SL-V, SL-1,
SL-41 or SL-44 injectors through one feed line. Used where bearing size is
such that multiple injector output is required. Fittings ⅛" NPT male each end.
Carbon steel construction.
Model

For Injector Series

Connections

81646

SL-V, SL-V XL OR SL1, SL41, SL44

⅛" NPTF Male

274824

SL-1 to SL-V connection

⅛" NPTF Male

Injector Outlet Adapter
Converts individual injector lubricant outlet when standard ⅛" O.D. tube is
not desired. All adapters are carbon steel unless otherwise noted.
Model

For Injector Series

Outlet Connections
⅛" NPTF Female

14988
84200
14991

¼" O.D. Tube
⅛" NPTF Male

SL32, SL33, SL42, SL43

249281

4 mm Tube

249282

6 mm Tube

Manual Grease Fitting Adapter
Allows manual lubrication of the machine between normal system cycles.
Carbon steel with Nitrile seals.
Model

For Injector Series

84195

Outlet Connections
⅛" O.D. Tube

SL32, SL33, SL42, SL43

84203

¼" O.D. Tube

Injector Locking Cap
Carbon steel locking caps set injectors to fixed output.
Model
102781

For Injector Series

Fixed Volume Output

SL32, SL43

.002 in3 / .033 cc

SL33, SL42

.003 in3 / .049 cc

Injector Cover Caps
Injector cover caps are designed to protect the injector from dirt, harmful
liquids and fumes.
Model

Fits Injector
Series

273088

SL-V

273089

SL-V XL

83272

SL1, SL44

Covers

Polycarbonate
Indicator
Stem

83730

SL11

68483

SL32, SL33,
SL42, SL43

Measuring
Chamber

90537

SL1, SL41, SL44

Injector
Body

17

Material

Vinyl

Aluminum

Length

Diameter

in.

mm

in.

mm

1.5

38.1

.715 (ID)

18.2

2.2

55.9

.715 (ID)

18.2

1.5

38.1

.69 (ID)

17.5

2.0

50.8

1.25

31.2

.5 (ID)

12.7

3.25

82.6

1.19 (ID)

30.2

1.125 (ID) 28.6

Centro-Matic® Automatic Lubrication Systems
Injector Accessories
Closure Plugs for Injectors and Manifolds
For use in plugging lubricant outlets of injectors and manifolds.
Model

*
*

12698
12698-9
12511

Material

Thread Size (in)

Carbon Steel

5

Stainless Steel
Carbon Steel

67044
67007

⁄16 / 7.9

½/ 12.7

⁄16-24

5

7
7

⁄16 / 11.1

⅜ NPT

Stainless Steel

3

⁄16 / 4.8

Style
1

⁄16 / 11.1

13

¼ NPT

67007-9
Style 2

B in./mm

⅛ PTF

12511-9

Style 1

A in./mm

⁄16 / 20.6

2

⅝ / 15.9

* For plugging outlet of series SL-32, SL-33, SL-42, SL-43 injectors.

Compression Nuts
Model
66260
66260-9
83924
83924-9
66713

Style

Thread
Size (in)

Material

One Piece
Two Piece

A
in./mm

B
in./mm

C
in./mm

⁄16 / 7.9

½ / 12.7

⅛ / 3.2

⁄8 / 15.9

¼ / 6.3

Brass
Stainless Steel
Brass

5

⁄16-24

7

⁄16-24

5

Stainless Steel

One Piece

Brass

7

⁄16 / 11.1

5

Injector-Operated Air Valve
Model

For Injector Series

Air Inlet

Air Outlet

82272

SL-1, SL-44

⅛" NPTF(F)

⅛" NPTF(F)

Air Lubricant Spray Devices
Model

Use With
Series

Air Inlet
(in)

Lubricant
Inlet (in)

68421
69456

*

SL1, SL44

¼ NPTF
Female

¼ NPTF
Female

68587
84204

SL32, SL33,
SL42, SL43

⅛ NPTF
Female

7

⁄16 – 24 Male

Spray
Outlet

Air Consumption

Fixed
Nozzle

3.5 CFM @40 PSI
99 l/min @2.8 bar

Swivel
Nozzle

4.1 CFM @60 PSI
116 l/min @4.1 bar

Bulkhead
Mount

5.2 CFM @80 PSI
147 l/min @5.5 bar

Fixed
Nozzle

Throttle Controlled

* 3⁄16" (4.8 mm) maximum bulkhead thickness.

Metric Outlet Adapters
Adapts injector outlet to 4 or 6 mm tubing.
Conversion Kit
Model No.

Tubing
Size

Material

Nut

Ferrule

249281

4 mm

Carbon Steel

249277

249271

249282

6 mm

Carbon Steel

249274

249273

Assembly comes with one nut and one ferrule.

Feedline Brush
Model 68874

Use to apply lubricant to chains and conveyors. 1⁄8" NPT(F) inlet, 1" long,
surface area diameter; aluminum body with nylon bristles.

5⁄ 8"

18

Centro-Matic® Automatic Lubrication Systems
FlowMaster II Pump
Continuous Innovation Increases Pump Life and
Simplifies Pump Installation, Operation and Service
FlowMaster II Features
• Increases pump life and simplifies pump installation, operation and service
• Common crankcase design for all FlowMaster motors (hydraulic, AC or DC
electric)
• Less susceptible to grease contamination
• Pump and reservoir combination models are level sensor and shut-off
system ready
• Culmination of years of design and performance improvements makes this
a premium-choice pump for single-line parallel lubrication systems
• Two year warranty

FlowMaster II Improvements
Crankcase Improvements
• 4-bolt hole pattern for all FlowMaster motors
• Dual bearing load support
• O-ring seals for all motors
• Wider bolt-hole pattern for easier top mounting of pump
• All FlowMaster II pumps will fit existing reservoirs
• Dual support ribs for increased strength
• Inner crankcase seal allows for easy and clean motor replacements without
loss of crankcase oil
• Increased depth of pump tube and crankcase interface for added strength
• Integrated crankcase oil drain for easier oil change

FlowMaster II
crankcase

Follower Improvements
• 2" (51 mm) closed foam seal resists grease by-pass
• Larger side bearing surface virtually eliminates tilting of the follower plate
• Improved vent tube seal
• Sturdy construction greatly enhances sealing properties
• Grease level-sensor ready
Follower

Reservoir Improvements
• Reservoir design incorporates 1" (25.4 mm) fill and 1¼" (32 mm)
overflow ports
• Accommodates new 2" (51 mm) follower
• Lids are adjusted for top-mounting FlowMaster II pumps
• Lids can be easily converted to grease level system operation
• Each reservoir includes two lifting eye bolts for safety
• Rigid pressure outlet connection fittings are replaced by a single flexible
hose
Upper Ball Check Design
• Ball check spring has been removed from flow path allowing 70% more
annular flow area
• Reduces clogging problems caused by contamination from unfiltered
grease
• Grease has a clear flow path, reducing downtime and costly repairs

Reservoir

New ball
check

19

Centro-Matic® Automatic Lubrication Systems
FlowMaster II Pump
Electric FlowMaster II Pump
• 19:1 gear ratio results in lower current draw
• Gear sets can be changed for different ratios
• 18" (457 mm) wire motor leads with Deutsch connectors for easier
installation
• Wire leads are sheathed for protection from the elements and rub areas

Hydraulic FlowMaster II Pump
• Four-bolt motor design with dual bearing drive shaft support virtually
eliminates motor loosening
• O-ring motor-to-crankcase seal virtually eliminates oil leaks
• Same hydraulic manifold and controls as on FlowMaster I models
Model Numbers and Specifications
Discontinued
model
(reference only)

1

FlowMaster II
model

Power and gear
ratio

Size
lb.

kg.

Description

85471

85728

24 V DC electric, 19:1

60

27

Reservoir and pump

85487

85723

Hydraulic

60

27

Reservoir and pump

86258

85722

Hydraulic

60

27

Reservoir and pump

85677

85726

Hydraulic

90

41

Reservoir and pump
Reservoir and pump

85220

85727

Hydraulic

120

54

85518

857241) 2)

Hydraulic

60

27

Reservoir and pump

85585

85725

Hydraulic

90

41

Reservoir and pump

85473

85730

24 V DC electric, 19:1

120

54

Reservoir and pump

85472

85729

24 V DC electric, 19:1

90

41

Reservoir and pump

85482

85734

Hydraulic

400

181

Pump

85481

85732

Hydraulic

60

27

Pump

85480

85733

Hydraulic

120/90

54/41

Pump

85587

85736

24 V DC electric, 19:1

35

16

Pump

85554

85737

24 V DC electric, 19:1

60

27

Pump

85591

85739

24 V DC electric, 19:1

400

181

Pump

85483

85731

Hydraulic

35

16

Pump

85566

85738

24 V DC electric, 19:1

120/90

54/41

Pump

85484

85735

Hydraulic

60

27

Pump

85676

857421)

Hydraulic

120/90

54/41

Pump

85678

85741

Hydraulic

60

27

Pump

85599

85743

115 to 230 V AC electric, 1 ph, 19:1

120/90

54/41

Pump

85598

85744

115 to 230 V AC electric, 1 ph, 19:1

400

181

Pump

85850

85745

220 to 420 V AC, 50 Hz, 3 ph, 19:1
230 to 460 V AC, 60 Hz, 3 ph, 19:1

120/90

54/41

Pump

85851

85746

220 to 420 V AC, 50 Hz, 3 ph, 191
230 to 460 V AC, 60 Hz, 3 ph, 19:1

400

181

Pump

85569

85747

24 V DC electric, 17.8:1

35

16

Pump

85552

85748

24 V DC electric, 34:1

35

16

Pump
Pump.

1)

85553

85749

24 V DC electric, 34:1

120/90

54/41

274873

85750

24 V DC electric, 7:1

35

16

Pump

274874

85751

24 V DC electric, 7:1

35

16

Pump

276041

85752

12 V DC electric, 19:1

35

16

Pump

276360

85753

12 V DC electric, 19:1

35

16

Pump

85592

85754

12 V DC electric, 19:1

60

27

Pump

277560

85740

24 V DC electric, 19:1

55

25

Pump

Fixed hydraulic control valves. Call Technical Service for information.

2

Developed for the fracking industry. Call Technical Serive for details.

20

Centro-Matic® Automatic Lubrication Systems
Reservoir Level Sensor and Overflow Prevention System
Lincoln’s New Design Automatically Shuts Off Grease
Fill Supply To The Reservoir
Lincoln’s advanced grease level gauge design with automatic overflow shutoff option is unlike any other system in the industry.
• The system senses the position of the follower in the reservoir (i.e., grease
level) and sends the signal to a level gauge which can be mounted at the fill
station.
• Grease level can be determined at all times.
• The level indicator signal can also be integrated into on-board systems.
• The system can prevent dangerous and costly overfills when used with the
automatic shut-off valve system.
• The sensor and follower plate automatically signals a high pressure shut-off
valve to the reservoir before overfilling occurs.
• Reduces maintenance time allowing personnel to do other jobs.
Unlike other shut-off systems, the Lincoln system does not use pressurized
technology. Therefore, the reservoir is not completely welded together and,
thus, the system does not need to adhere to the governmental pressurizedvessel regulations in some countries (Australia).
Overflow spillage is a common result of ground filling large grease reservoirs
located in remote or hard-to-reach areas of machines. The Lincoln automatic
shut-off system prevents this type of overflow avoiding safety hazards which
can result in injury and potential costly fines. As a result, it is easy to see
how this system will pay for itself. This system is completely retrofitable to all
FlowMaster pump and bucket combinations with a follower.

Deutsch connector links the
sensor to the controller

When filling the reservoir, a high-pressure shut-off valve activates when the
reservoir is full, stalling the supply pump. After the supply pump is turned off,
a pressure relief button on the control box opens to relieve supply line
pressure so it can be safely uncoupled.
“Floating” magnet
detects grease
level

Level
sensor

Special follower plate
[also available in 2 in.
(50.8 mm) foam version]

FlowMaster pump and reservoir with 2" (50.8 mm)
foam follower and level sensor

21

Centro-Matic® Automatic Lubrication Systems

Reservoir Level Sensor and Overflow Prevention System
Model 280450
Control box with grease-level gauge (24 V DC), “full” alarm light and
momentary switch for shut-off valve.

Model 283005
Model 280450

7,350 psi (507 bar) shut-off valve is designed to prevent overflow during
reservoir filling.

Model 276849
Special FlowMaster reservoir lid to accept sensor .

Model 274872
10,000 psi (689.5 bar) high-pressure gauge before shut-off valve.
Model 283005

Model 278097
Follower magnet bracket kit.

Model 280414
Cable assembly between sensor and controller.
Model 276849

Model 274872

Model 278097

Model 280414

WARNING
Make sure fill coupling is capable
of handling high pressure.

Model

Description

280455

Controller for level sensor only

280450

Controller for level sensor and overflow prevention system

283005

7 350 psi (507 bar) high-pressure shut-off valve

274524

Sensor for standard 60 lb. (27 kg) follower

277659

Sensor for 2 in. (50.8 mm) 60 lb. (27 kg) foam follower

274312

Standard 60/90 lb. (27/41 kg) follower with sensor bracket

85706

2 in. (50.8 mm) 60/90 lb. (27/41 kg) foam follower with sensor bracket

280441

Sensor-ready lid for 60/90 lb. (27/41 kg) reservoir with standard follower

277703

Sensor-ready lid for 60/90 lb. (27/41 kg) reservoir with 2 in.
(50.8 mm) foam follower

278092

Sensor for standard 90/120 lb. (41/54 kg) follower

277654

Sensor for 2 in. (50.8 mm) 90/120 lb. (41/54 kg) foam follower

278094

Standard 120 lb. (54 kg) follower with sensor bracket

278095

2 in. (50.8 mm) 120 lb. (54 kg) foam follower with sensor bracket

280442

Sensor-ready lid for 120 lb. (54 kg) reservoir with standard follower

278096

Sensor-ready lid for 120 lb. (54 kg) reservoir with 2 in.
(50.8 mm) foam follower

280414

30 ft. (10 m) controller cable

278097

Follower magnet bracket kit (for all followers)

85763

60 lb. (27 kg) 24 VDC FlowMaster II pump and bucket with sensor

85762

90 lb. (41 kg) 24 VDC FlowMaster II pump and bucket with sensor

274872

10,000 psi (689.5 bar) high-pressure gauge; ¼ in. NPT;
2½ in. (63.5 mm) face

Note: standard follower, sensor and lid must be used together. 2 in. (50.8 mm) foam follower, sensor and lid
must be used together. Do not mix.

22

Hydraulic Lubrication Systems
Hammer Pumps
HTL Single Shot Hydraulic Lubricator Pump
for Hammers
• Delivers precise lubrication every time the hammer cycles
• Increase productivity—no work interruption
• Reduces machine repairs and replacement costs
Arms and breakers move constantly and exert enough force to demolish a building or repair
roads in a tough environment filled with grit and debris. Many OEMs recommend frequent
lubrication of that hammer to achieve optimal performance and to hold down maintenance and
repair costs. However, deadline-driven operators rarely halt work to grease the hammer, which
can lead to breakdowns that grind down productivity and inflate repair expenses. Lincoln’s
HTL Pumps make precise, consistent lubrication a reality. Now your operator can lubricate the
hammer without leaving the cab. The pumps attach directly to the hammer, and your operator,
with the push of a pedal, automatically sends a single shot of hydraulic fluid to the pump. Then
the pump gives one shot of grease to lubricate the bearing points. When the operator’s foot
comes off the pedal, pressure releases the spring in the pump so it’s ready to lubricate again.
Applications: construction OEMs, hydraulic hammer retrofits, demolition attachments and
medium to larger breakers/hammers
• Withstands vibrations of an operating hammer
• Travels with hammer, perfect for rental equipment or hammers used on various machines
• Hydraulic power supply
• Pedal-actuated
• Attached grease fitting allows for manual filling and fast priming of pump
• Uses standard 14.5-ounce grease cartridges and handles chisel paste
• To adjust output, metering plugs are available (0.006 in³ [0.1cm³] to 0.031 in³ [0.5cm³])
• Convenient visual low level indicator
Operating Temperature:

-10°F to +180°F / -23°C to +80°C

Hydraulic Port:

SAE #4 ( 7/16-20 UNF) O-ring

Pump Outlet:

SAE #4 ( 7/16-20 UNF) O-ring

Weight (Empty):

16.3 lbs. / 7.4 kg

Weight (Full):

17.3 lbs. / 7.8 kg

Specifications
Model No.

85429

Hydraulic Ratio at Max.
Output and Pressure*

2.4:1

0.7:1

Max. Hydraulic
Operating Pressure:

2600 psig
(112 bar)

5000 psig (345 bar)

Max. Recharge (or Vent)
Pressure:

400 psig
(28 bar)

85425

1100 psig
(75 bar)

Max. Lube Outlet
Pressure:
Output per Stroke (Std.
Metering Plug)

85424

85414

600 psig
(41 bar)

1100 psig
(75 bar)

6500 psig (450 bar)
.018 cu. in. (0.3 cc) Std.
.006 - .031 cu. in. (0.1 - .5 cc) Optional*

Grease Reservoir
Volume:

.031 cu. in. (0.5 cc) Std.
.006 - .031 cu. in.
(0.1 - .5 cc) Optional*

14.5 oz.

*Optional metering plugs are available for different output volume. See Pump Output Adjustment chart below.

Pump Output Adjustment Metering Plug
Model No.

Output per Stroke

271924

0.006 in³ / 0.1 cm³

271925

0.012 in³ / 0.2 cm³

271926
271927

*

0.018 in³ / 0.3 cm³
0.031 in³ / 0.5 cm³

23

*Note: Standard plug included with pump

Hydraulic Lubrication Systems
Hammer Pumps
HTL 201US Continuous Hydraulic Lubricator Pump
for Hammers
• Delivers precise lubrication every time the hammer operates
• Increase productivity—no work interruption
• Reduces machine repairs and replacement costs
Arms and breakers move constantly and exert enough force to demolish a building or repair
roads in a tough environment filled with grit and debris. Many OEMs recommend constant
lubrication of that hammer to achieve optimal performance and to hold down maintenance and
repair costs. However, deadline-driven operators rarely halt work to grease the hammer, which
can lead to breakdowns that grind down productivity and inflate repair expenses. Lincoln’s
HTL Pumps make precise, consistent lubrication a reality. Now your operator can lubricate the
hammer without leaving the cab. The pumps attach directly to the hammer, and your operator,
with the push of a pedal, automatically sends a continuous flow of hydraulic fluid to the pump.
Then the pump gives continuous grease to lubricate the bearing points. When the operator’s
foot comes off the pedal, pressure releases the flow in the pump so it’s ready to lubricate
again.
Applications: construction OEMs, hydraulic hammer retrofits, demolition attachments and
medium to larger breakers/hammers
• Mounts directly on the hydraulic device and lubricates continuously while in operation
• Continuous lubrication with small quantities during the working cycle
• Compact design
• Independent – the pump stays with the tool that requires lubrication even if the carrier unit is
exchanged.
• 14.5 oz. cartridge can be replaced or the reservoir bulk filled with the special built-in adapter
making it ideal for OEMs or rental fleets that specify a specific grease or chisel paste on their
equipment.
• Low lubricant level indicator lets operator know when to fill or change cartridges.

Operating Temperature:

-13°F to +140°F / -25°C to +60°C

Hydraulic Port:

G ¼ BSPP O-ring

Pump Outlet:

G ¼ BSPP O-ring

Specifications
Model No.

85446

Max. Hydraulic Operating Pressure:

1160 to 3045 psi (80 to 210 bar)

Max. Lube Outlet Pressure:

1740 to 3916 psi (120 to 270 bar)

Output per Stroke

0.13 in3 / stroke (0.22 cm3 / stroke) to 0.41 in3 / stroke
(6.7 cm3 / stroke)

Grease Reservoir Volume:

14.5 oz.

24

Centro-Matic® Automatic Lubrication Systems
P653S Electric Pump
Taking Lincoln’s Pump Performance and Dependability In A Totally New Direction

The fully integrated P653S pump is an example of Lincoln’s commitment to providing innovative, cost-effective
solutions through industry-leading advances in technology. This next-generation, lower-cost pump package can be
fitted with one of four reservoir sizes and easily adapts to many applications.

P653S Pump Features
• Integrated pump supplies lubricant to a single line parallel lubrication system
• Pumps low- and high-viscosity greases including industry standard NLGI grade
2 grease
• Easily interfaces with telematics technology in today’s heavy equipment
• Operating temperature range from -40°F to +158°F (-40°C to +70°C) VDC or 32°F
to 122°F (0°C to 50°C) VAC*
• Neutral switch allows mobile equipment to remain idling with pump power on but the
timer is deactivated – allowing manual lubrication functionality.
• All pumps include low-level and system fault alarms
Benefits
• Integration of major system components reduces labor and overall costs
• Simplifies lubrication system design
• Installation time is reduced due to the ”plug-and-play” pump design. Simply mount
the pump, connect power and the supply lines and the system is ready for operation.
• Neutral switch ensures lubrication only when the machine is operating – eliminating
wasted grease.
* Appropriate greases apply

INTERNAL COMPONENTS
• Telematics Signaling
Capabilities for Low
Level and System
Fault Detection
• Pressure Switch or
Transducer

15 AND 20 LITER
RESERVOIR KITS
Convert any 4 or 8 liter
P653S or P603S pump
without a follower to a 15
or 20 liter reservoir with the
following kits:
Reservoir size:
15L
20L

Part No.
276764
276765

Available With or
Without Follower
(shown with
follower)

Reservoir Available in
Four Sizes –
4, 8, 15 and 20 Liters
Means Versatility in
Scheduling Refilling
Service Intervals

High-Volume
Output

Vent Valve

Reservoir Refill Port

Programmable
Controller

120/220 AC or
24-DC Pump

25

Centro-Matic® Automatic Lubrication Systems
P653S Electric Pump for Grease Applications
P653S Pump Specifications for Grease Applications
Electrical data

DC Pumps

AC Pumps

Incoming voltage:

19 to 31 VDC

100 to 240 VAC

Maximum current:

10 amps

1.7 amps

Frequency:

—

47 to 63 hz

Operating temperature:

-40 to +158°F (-40 to +70°C)

32 to 122°F (0 to 50°C)

Common Electrical Data for DC and AC Pumps
Minimum pause time:

4 min.

Maximum pause time:

59 hrs. 59 min.

Pause time increments:

1 hr. or 1 min.

Maximum pumping time:

12 min.

Pump P653S
Operating pressure with:
Pressure switch (fixed):

3,500 psig (240 bar)

Pressure transducer (adj.):

1,400 to 4,600 psig (96 to 317 bar)

End of line pressure switch and transducer
setting (not adj.):

2,500 psig (172 bar)

Number of outlets:

1

Output:

1.5 in3/min (24.6 cm3/min)

Pump Elements
Piston diameter:

7 mm

Number of pumping elements
(connected together):

3

Protection

1P 6K9K

26

Centro-Matic® Automatic Lubrication Systems
P653S Electric Pump for Grease Applications
Available Pump Models
NOTE: All models are designed for grease and include stirring paddle and low-level detection. Pumps include remote signaling cable, relief valve,
electrical connectors and external pressure switch or transducer (as indicated for each model).

Model
No.

24
VDC

80086
80087
80105
80106
80076
80077
80109
80110
80090
80091
80107
80108
80080
80081
80111
80112
80120
80121
80122
80129*
80130*
80131*
80082
80083
80084
80085
80072
80073
80074
80075
80088
80089
80078
80079
80134
80135

X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X

120/230
VAC
50/60 Hz

Reservoir
Size (L)

X
X
X
X
X
X
X
X
X
X
X
X
X
X

4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
20
15
15
8
4
8
4
4
4
4
4
4
4
4
8
8
8
8
15
20

Follower
Plate

Internal
Pressure
Switch

Internal
Pressure
Transducer

Internal & Endof-Line Pressure
Switch

Internal & Endof-Line Pressure
Transducer

X
X
X
X
X
X
X
X

X
X
X
X
X
X
X
X

X
X
X
X

X
X
X
X
X
X
X

X
X
X
X
X

X
X
X
X
X
X
X

X
X
X
X
X
X

X
X

X
X
X

X

X

* PLC pause time controlled

P653S Pumps for Oil Applications
Two new pumps made especially for oil applications. These pumps operate the same as the grease version with lowlevel detect, internal pressure transducer and filtered filling through the lid. Available in two reservoir sizes.
Model

120/230 AC

Reservoir Size

Internal Transducer

80127

X

4 liter

X

80128

X

8 liter

X

27

Centro-Matic® Automatic Lubrication Systems
P603S Pump
P603S Pump Features
Reliable Operation in Harsh Environments
• Wind turbines – especially offshore
• Construction and mining
• Commercial vehicles
• Compact and medium-sized machines
and industrial applications
• Robust and easy system layout
Incoming metering
Pump Output
Supply voltage
Programmable controller
Reservoir capacity/liter
Integrated pressure sensor and vent
Visual low-level

• Simple maintenance – easy to expand
• SE1 suction elements for used lubricant
• Increased profits and productivity
• Improved operating times; less costly
downtime resulting from improper
lubrication
• Lower costs for repairs and spare parts
0.05 - 0.4 cm³/stroke
12 cm³
12 VDC, 24 VDC, 100-240 VAC
Yes
4, 8, 10, 15, 20
Yes
Yes

Available Pump Models
Model No.

Description

Power

Size

Follower

Internal Transducer

645-41064-3

P603S- 4XLF -3Z7-AC-2A7.16-S13-SE

AC

4L

X

X

645-41062-3

P603S- 8XLF -3Z7-AC-2A7.16-S13-SE

AC

8L

X

X

645-41110-2

P603S- 8XLBO-3Z7-AC-3A7.16-S12-SE

AC

8L

645-41062-4

P603S- 8XLBO-3Z7-AC-3A7.16-S19-SE

AC

8L

645-41073-5

P603S-15XLF -3Z7-AC-2A7.16-S13-SE

AC

15L

X

X

645-41064-8

P603S- 4XLF1-3Z7-12-1A7.16-S01-SE

12 DC

4L

X (Bayonett)

X

645-41064-7

P603S- 4XNBO-3Z7-12-2A7.16-S01-SE

12 DC

4L

645-41110-3

P603S- 8XLF1-3Z7-12-1A7.16-S01-SE

12 DC

8L

X (Bayonett)

X

645-41062-9

P603S- 8XLF -3Z7-24-1A7.16-S01-SE

24 DC

8L

X

X

645-41064-4

P603S- 4XLBO-3Z7-24-1A7.16-S17-SE

24 DC

4L

645-41064-6

P603S- 4XLF -3Z7-24-1A7.16-S13-SE

24 DC

4L

645-41064-2

P603S- 4XNBO-3Z7-24-1A7.16-S01-SE

24 DC

4L

X

645-41062-8

P603S- 8XLBO-3Z7-24-2A7.16-S19-SE

24 DC

8L

X

645-41062-9

P603S- 8XLF -3Z7-24-1A7.16-S01-SE

24 DC

8L

X

X

645-41062-7

P603S- 8XLF -3Z7-24-1A7.16-S03-SE

24 DC

8L

X

X

645-41119-1

P603S-10XLF -3Z7-24-1A7.16-S13-SE

24 DC

10L

X

X

645-41175-5

P603S-4XNBO -3Z7-12-1A7.16-S22-SE

12 DC

4L

645-41119-2

P603S-10XLF -3Z7-AC-2A1.01-S13-SE

AC

10L

28

X
X

X

X
X

X

X
X

X

Centro-Matic® Automatic Lubrication Systems
P603S Pump
Pump and Accessories – All-In-One
The pump with integrated controller is easy to install. The all-in-one design of the pump
includes the programmable controller, a pressure switch/transducer and a vent valve.
Simple System Design – Easy to Expand
The single-line system’s design and layout is uncomplicated, making it easy to install
and operate. A single mainline reduces material and installation costs.
Easy to Service
It is quick and easy to exchange out an injector. The mainline or neighboring injectors
do not have to be removed. The exchange can be performed between lubrication cycles
so that there is no wasted lubricant or excessive costly downtime.
Additional Pressure Switch
An additional pressure switch at the end of larger systems can be used for added
pressure control to ensure correct lubrication.
Special Features for Wind Turbine Applications – Also for Off-Shore Systems
Lincoln single-line systems completely vent during the pause interval. As a result, they
are suitable for fast separating lubricants.
For rotating operation in wind turbines, the reservoir is equipped with a follower plate
and stirring paddle – which also facilitates the usage of fast separating lubricants. For
stationary operation a stirring and fixed paddle is sufficient.

Pump Specifications
Pump Output
Maximum Working Pressure
Maximum Current Draw
Steering Paddle And Follower

P603S 12/24 VDC

P603S / AC

0.73 cu.in/min (12cm³/min)

0.73 cu.in/min (12cm³/min)

4,350 psig (300 bar) / 3,480 psig (240bar)

4,350 psig (300 bar) / 3,480 psig
(240bar)

2 Amps

2 Amps

Yes

Yes

Reservoir Size, Liter

4, 8, 10, 15 and 20

4, 8, 10, 15 and 20

Number Of Pumping Elements

3, (7 mm diameter)

3, (7 mm diameter)

18

18

RPM, Paddle (76˚F)
Pressure Switch At Pump

Yes

Yes

Transducer At Pump

Yes

Yes

Pressure Switch/ End Of Line

Yes

Yes

Transducer/ End Of Line

Yes

Yes

PCB

Yes

Yes

Separate Alarms, LL/Proxy Switch

No

No

24.0 VDC Input

Yes

Yes

Switching Power Supply

No

Yes

Connectors

Bayonet Style

Bayonet Style + Square Type (AC)

Data Logger

No

No

Remotely Change Lube Frequency

Yes

Yes

Count Control

Yes

Yes

Ignition & Neutral Switch
Acknowledging Fault
Manually Lub Switch, External
Pump On LED, External
Protection
Temperature

Yes

Yes

At Pump/External

At Pump/External

Yes

Yes

Yes

Yes

IP 6K9K

IP 6K9K

-40°C / +70°C

-40°C / +70°C

29

Centro-Matic® Automatic Lubrication Systems
Manual Grease Pumps
Once you have determined your total lubricant requirements, your greatest line length and compensated for line expansion, you’re
ready to determine the pump you need.
If your overall requirements are less than 2.4 cu. in. for oil or 2.15 cu. in. for grease, you can select a single stroke pump. Should
your requirements demand more capacity, a reciprocating pump will fill the need.
Your Lincoln representative will suggest the best pump for you based on your application. Look over the following pages of pump
selection options and feel free to ask questions.

Model 83817 Economy Grease Pump
Manual pump has metal reservoir and spring-loaded follower. Indicator pin in pump
base shows when 2500 psi system operating pressure has been achieved.
Model:

83817

Output/Stroke:

.100 cu. in. / 1.6 cc

Reservoir Capacity:

1 lb. 30 cu. in. / .45 kg 492 cc

Lube Outlet:

⅛" NPTF (F)

Typical System
Operating Pressure:
Dimensions (HxWxL):

Min.

1200 psig / 82 bar

Max.

3500 psig / 241 bar

in.

15¼" x 5" x 5⅝"

mm

387 x 127 x 141 mm

Filling Method:

14.6 oz. Grease Cartridge/Bulk Fill

Model 1810 Grease Pump
Translucent reservoir with spring-loaded follower. Indicator pin in pump base
shows when 2500 psi system operating pressure has been achieved. Refill through
included fitting using Model 81834 filler pump or other manual pump equipped with
Model 645006 coupler.
Model:

1810

Output/Stroke:

.160 cu. in. / 2.6 cc

Reservoir Capacity:

5 lb. 150 cu. in./ 2.27 kg 2458.50 cc
¼" NPTF (F)

Lube Outlet:
Typical System
Operating Pressure:
Dimensions (HxWxL):
Filling Method:

Min.

1200 psig / 82 bar

Max.

3500 psig / 241 bar

in.

16¼" x 7⅛ "x 7¾"

mm

413 x 181 x 197 mm
81834 Filler Pump

30

Centro-Matic® Automatic Lubrication Systems
Air-Operated (Single Stroke) Grease Pumps
Centro-Matic® Integrated Pumps
All models are air-operated, positive displacement pumps delivering a maximum volume by means of a single stroke
of the pump (volumes listed below). Solenoid air valves and adjustable solid-state time controls are integrated into
the pump body. All pumps are designed to deliver grease to single-line injectors and include a special high-volume
refill fitting. Acrylic reservoirs are available in several sizes. Integrated controls feature LED indicators for “Power On”,
“Pump On” and “Alarm,” along with a membrane-type, “Manual Lube” switch.

Model 85434 Integrated Grease Pump
Ratio:

31:1

Power:

120 VAC

Typical System
Operating Pressure:

Min.

1200 psig / 82 bar

Max.

3500 psig / 240 bar

Maximum Output:

1.4 in³ / 18.7 cm³

Reservoir Capacity:

4.5 lbs. / 1.8 kg

Dimensions (LxWxH):

24.70" x 6.52" x 18.11" / 627 x 166 x 460 mm

Model 85434

Model 85435 Integrated Grease Pump
Same as Model 85434 except 240 VAC.

Model 85436 Integrated Grease Pump
Same as Model 85434 except with a Ratio of 25:1 and Maximum Output of
2.15 in³ (35.2 cm³).

Model 85442 Integrated Grease Pump
Ratio:

20:1

Power:

120 VAC

Typical System
Operating Pressure:

Model 85442

Min.

1200 psig / 82 bar

Max.

3500 psig / 240 bar

Maximum Output:

0.45 in³ / 7.4 cm³

Reservoir Capacity:

1 lb. / 0.450 kg

Dimensions (LxWxH):

5.25" x 7.24" x 12.02" / 133 x 184 x 305 mm

Model 85444 Integrated Grease Pump
Ratio:

20:1

Power:

120 VAC

Typical System
Operating Pressure:

Min.

1200 psig / 82 bar

Max.

3500 psig / 240 bar

Maximum Output:

0.45 in³ / 7.4 cm³

Reservoir Capacity:

4 lbs. / 1.8 kg

Dimensions (LxWxH):

5.25" x 7.24" x 20.75" / 133 x 184 x 527 mm

Model 85445 Integrated Grease Pump
Same as Model 85444 except 240 VAC.

Timer and Controller Specifications

Model 85444

On
Time

Off
Time

Alarm
Contacts

Operating
Temperature

10 sec
or 30 sec

1/2 to 30 min
or 30 min to 30 hrs

8 amps
@ 250 VAC

-10°F to 150°F
-23°C to 65°C

31

Centro-Matic® Automatic Lubrication Systems
Air-Operated (Single Stroke) Grease Pumps
Model 82886 Pump

Pump discharges lubricant on air-powered forward stroke and vents on
springpowered return stroke through built-in check/vent valve. Reservoir is
translucent with spring-loaded follower. Includes filler fitting for refilling reservoir
with Model 81834 or other manual pump equipped with Model 645006 coupler.

Model 83668

Same as Model 82886 except includes larger reservoir.

Model 82653 Bare Pump

Model 82886

Pump uses air for forward and return stroke but dispenses lubricant on forward
stroke only. Return stroke vents lubricant pressure through included check/vent
valve. Translucent reservoir has spring-loaded follower. Refill through included filler
fitting using Model 81834 or other manual pump equipped with Model 645006
coupler.

Model 83834 High Volume Bare Pump

Same as Model 82653 except 25:1 ratio, 2.15 cu. in (35.2 cc) maximum output.
Model 83668

Model 82655 Pump with Controls

Same as Model 82653 except includes Model 84501 solid state timer and
350244 four way electric solenoid valve.

Model 83800 High Volume Pump with Controls

Same as Model 83834 except includes Model 84501 solid state timer and
350244 four way electric solenoid valve.

Model 82653

Model
82886
83668
82653
82655
83834
83800

Lubricant/
Air Ratio

Max.
Output

20:1

.45 in³
7.4 cm³

31:1

1.4 in³
22.9 cm³

25:1

2.15 in³
35.2 cm³

Reservoir
Temp.
Air Inlet
Range

Reservoir
Capacity

Lubricant Oper.
Pressure
Min.
Max.

Lube
Outlet

1 lb/.45 kg
30 in³/492 cm³
4 lb/1.81 kg
120 in³
1967 cm³

0°F to 150°F
¼"
-18°C to
NPTF(F)
65°C

1200
psig /
82 bar

¼"
NPTF(F)

3500
psig /
240 bar

Dimensions
HxWxL

Air Valve
Required

10⅜" x 5¼" x 6"
263 x 133 x 152 mm
18½" x 5¼" x 6"
470 x 133 x 152 mm

3-way

18½" x 5¾" x 21"
470 x 146 x 533 mm

4-way

Note:
Air consumption @ 100 psi is .15 CFM per stroke.

Timer Specifications
Cycle Time

On Time

Min

Max

Min

Max

20 Sec.

24 Hr.

10 Sec.

1 Min.
24 Sec.

Power
Requirements

Ambient Operating
Temp. Range

120 VAC, 60 hz
110 VAC, 50 hz

10°F to +150°F
-23°C +65°C

Note:
Refer to System Controls section for detailed timer and solenoid operated air valve
specifications.

32

Centro-Matic® Automatic Lubrication Systems
Air–Operated (Reciprocating) Grease Pumps
Model 83167
Includes transparent reservoir, spring-loaded follower, vent valve assembly and
filler fitting for refilling of reservoir with 81834 filler pump or other manual pump
equipped with Model 645006 coupler.
Model:

83167

Lubricant/Air Ratio:

40:1

Output/Min @ 100 PSIG Air:

12 cu. in. 197 cc

Reservoir Capacity:

12 lb. / 5.44 kg / 360 cu. in. / 5900 cc

Air Inlet:

⅛" NPTF (F)

Lube Outlet:

¾" NPTF (F)

Typical System
Operating Pressure:

Min.

1200 psig / 82 bar

Max

3500 psig / 241 bar

Dimensions (HxWxL):

22½" x 9" x 16¼" / 572 x 229 x 413 mm

Filling Method:

81834 Filler Pump

Reservoir:

Translucent Acrylic

Notes: 1. Pump requires 3-way air valve. 2. Air consumption @ 100 psi is .15 CFM per cycle

Model 83599
Same as Model 83167 except includes base mounting kit and metal reservoir
with indicator rod for visual check of grease level. Reservoir includes springloaded follower.
Model:

83599

Lubricant/Air Ratio:

40:1

Output/Min @ 100 PSIG Air:

12 cu. in. / 197 cc

Reservoir Capacity:

12 lb. / 5.44 kg 360 cu. in. / 5900 cc

Air Inlet:

¼" NPTF (F)

Lube Outlet:

¾" NPTF (F)

Typical System
Operating Pressure:

Min.

1200 psig 82 bar

Max.

3500 psig 241 bar

Dimensions (HxWxL):

24⅜" x 9" x 183/16" / 619 x 229 x 462 mm

Filling Method:

81834 Filler Pump

Reservoir:

Aluminum

Notes: 1. Pump requires 3-way air valve. 2. Air consumption @ 100 psi is .15 CFM per cycle

33

Centro-Matic® Automatic Lubrication Systems
Air–Operated (Reciprocating) Grease Pumps
Model 1823
Includes 2½" air motor driven pump, vent valve assembly, pump elevator,
connecting lubricant and air hoses, and control panel.
Model:

1823

Lubricant/Air Ratio:

50:1

Output/Min @ 100 PSIG Air:

30 cu. in. / 492 cc

Drum Size:

U.S. standard 120 lb. refinery drum

Air Inlet:

⅜" NPTF (F)

Lube Outlet:

¾" NPTF (F)

Typical System
Operating Pressure:

Min.

1200 psig / 82 bar

Max.

3500 psig / 241 bar

Components included:

Pump & Vent Assembly
Controller
Pump Elevator

Controller Electrical
Requirements:

120V, 60 Hz., 110 V, 50hz

282288
85209
83447

Notes: 1. Air consumption @ 100 psi is .42 CFM per cycle.
2. Model 83371 follower plate is available as an optional accessory.

Model 282288
Same specifications as Model 1823 but does not include elevator or controller.

Model 1827 Heavy-Duty Unit

Consists of PowerMaster pump, vent valve assembly with air and lubricant
connecting hoses, drum cover and control panel.
Model:

1827

Lubricant/Air Ratio:

75:1

Output/Min @ 100 PSIG Air:

161 cu. in. / 2638 cc

Drum Size:

U.S. standard 400 lb. refinery drum

Air Inlet:

⅜" NPTF (F)

Lube Outlet:

⅜" NPTF (F)

Typical System
Operating Pressure:

Components included:

Min.

1200 psig / 82 bar

Max.

3500 psig / 241 bar
Basic Pump
Vent Valve
Controller
Drum Cover

2004
85215
85209
81675

Model 1828
Same as Model 1827 except includes Model 2008 pump, 85218 vent valve and
Model 84034 drum cover sized for U.S. standard 120 lb. refinery drum. Includes
85209 controller.

Model 1829
Same as Model 1827 except includes Model 2010 pump (50:1 ratio, 231 cu.in./
min. (3785 cc) delivery at 100 psig air). Fits U.S. standard 400 lb. refinery drum.
Includes 85209 controller and 85215 vent valve.

34

Centro-Matic® Automatic Lubrication Systems
Electric Grease Pumps / Manually Operated Oil Pump
Model 1849

Fully automatic assembly including pump, 220/440 volt motor, translucent reservoir with
spring-loaded follower, 4000 psi (276 bar) safety unloader, adjustable pressure switch and
time control. Time control is adjustable for lubrication cycle frequency of 5, 10, 15, 20, 30 or
60 min. Solid state time delay relay (35 sec. to 240 sec.) included for connection of audible or
visual alarm to signal lubrication failure due to empty reservoir or broken supply line.
Model:
Output Min:
Reservoir Capacity:
Lube Outlet:
Pump Motor
Controller
Min.
Max.

Electrical
Specifications:
Typical System
Operating Pressure:
Dimensions (HxWxL):
Reservoir Fill Method:

1849*
18 cu. in. / 295 cc
12 lb. / 5.44 kg / 360 cu. in. / 5900 cc
¼" NPTF (F)
220/440 VAC, 60 Hz, 3 ph
115 VAC, 60 Hz
1200 psig / 82 bar
3500 psig / 241 bar
25⅜" x 13" x 1913⁄16" / 645 x 330 x 503 mm
81834 Filler Pump or Manual Pump and
645006 Coupler

* See Model 85520 in Systems Control section for controller specifications.

Model 201849

Same as Model 1849 except has 7 lb. reservoir capacity.

Model 1835

Same as Model 1849 except has 115 VAC, 60 Hz motor and controller.

Model 1833

Similar to Model 1849 except: 24 VDC pump motor and controller; metal reservoir with
visual level indicator rod; 2.5, 5, 10, 20, 40 and 80 minute cycle frequency adjustment; 60
second fixed on time and alarm relay features. Incorporates pressure switch factory set at
2500 psi (172 bar).
Model:
Output/Min:
Reservoir Capacity:
Lube Outlet:
Pump Motor
Controller
Min.
Max.

Electrical
Specifications:
Typical System
Operating Pressure:
Dimensions (HxWxL):
Reservoir Fill Method:

1833
18 cu. in. / 295 cc
12 lb. / 5.44 kg / 360 cu. in. / 5900 cc
¼" NPTF (F)
¼ HP, 24 VD, 10 AMP
24 VDC, 5 watts
1200 psig / 82 bar
3500 psig / 241 bar
34¼" x 11½"x 21¾" / 870 x 292 x 552 mm
81834 Filler Pump or Manual Pump with
645006 Coupler

Notes:
1. Controller has provision for remote manual lube button and remote lube failure alarm.
2. Enclosure is designed to meet NEMA 3S and 12 specifications.

Manually Operated Oil

Model 1812

Pump has translucent reservoir with filler cap and strainer. Pump base has built-in check/
vent valve and an indicator pin to show when system pressure is achieved.
Model:
Output/Stroke:
Reservoir Capacity:
Lube Outlet:
Min.
Typical System
Operating Pressure: Max.
Dimensions (HxWxL):

35

1812
.160 cu. in. / 2.6 cc
4½ pint / 130 cu. in.
2.13 liter / 2130 cc
¼" NPTF (F)
750 psig / 52 bar
1000 psig / 69 bar
16¾" x 7⅛"x 7¾" / 425 x 181 x 197 mm

Centro-Matic® Automatic Lubrication Systems
Air–Operated (Single Stroke) Oil Pumps
Centro-Matic® Integrated Pumps
All models are air-operated, positive displacement pumps delivering a maximum volume by means of a single stroke of
the pump (volumes listed below). Solenoid air valves and adjustable solid-state time controls are integrated into the pump
body. All pumps are designed to deliver fluid lubricants to single-line injectors and are filled via a spring-loaded filler cap and
internal filter. Acrylic reservoirs are available in several sizes. Pump Models 85432 and 85433 do not include a reservoir,and
are designed for remote or bulk-fill oil applications (80 psi/5.4 bar maximum head pressure). Integrated controls feature LED
indicators for “Power On”, “Pump On” and “Alarm,” along with a membrane-type, “Manual Lube” switch.

Model 85430 Integrated Fluid Pump
Ratio:
Power:
Min.
Max.

Typical System
Operating Pressure:
Model 85430

Maximum Output:
Reservoir Capacity:
Dimensions (LxWxH):

20:1
120 VAC
750 psig / 52 bar
1000 psig / 69 bar
2.4 in³ / 39.3 cm³
4.5 pints / 2.1 liters
24.70" x 6.52" x 18.11" / 627 x 166 x 460 mm

Model 85431 Integrated Fluid Pump
Same as Model 85430 except 240 VAC.

Model 85432 Integrated Fluid Pump
Same as Model 85430 except without reservoir.

Model 85433 Integrated Fluid Pump
Same as Model 85432 except 240 VAC.
Model 85432

Model 85438 Integrated Fluid Pump
Ratio:
Power:
Min.
Max.

Typical System
Operating Pressure:
Maximum Output:
Reservoir Capacity:
Dimensions (LxWxH):

20:1
120 VAC
750 psig / 52 bar
1000 psig / 69 bar
0.45 in³ / 7.4 cm³
1.25 pints / 0.6 liters
5.25" x 7.24" x 12.02" / 133 x 184 x 305 mm

Model 85440 Integrated Fluid Pump
Model 85438

Ratio:
Power:

20:1

Typical System Operating Min.
Pressure:
Max.
Maximum Output:
Reservoir Capacity:
Dimensions (LxWxH):

750 psig / 52 bar

120 VAC
1000 psig / 69 bar
0.45 in³ / 7.4 cm³
4.25 pints / 2.0 liters
5.25" x 7.24" x 20.75" / 133 x 184 x 527 mm

Model 85441 Integrated Fluid Pump
Same as Model 85440 except 240 VAC.

Timer and Controller Specifications
On
Time

Off
Time

Alarm
Contacts

Operating
Temperature

10 sec
or 30 sec

1/2 to 30 min
or 30 min to 30 hrs

8 amps
@ 250 VAC

-10°F to 150°F
-23°C to 65°C

Model 85440

36

Centro-Matic® Automatic Lubrication Systems
Air–Operated (Single Stroke) Oil Pumps
Model 82885
Pump discharges lubricant on air-powered forward stroke and vents on springpowered return stroke through built-in check/vent valve. Translucent reservoir
is refilled through filler cap with strainer.

Model 83667
Same as Model 82885 except includes larger reservoir.

Model 82570

Model 82885

High-volume pump discharges lubricant on air-powered forward stroke and vents
through included check/vent valve on air-powered return stroke. Translucent
reservoir is refilled through filler cap with strainer.

Model 82573

Model 83667

Air-operated, single stroke oil pump and timer assembly. Same as Model 82570
except includes Model 84501 solid state timer and 350244 four-way electrical
solenoid valve. Power requirements: 120 VAC, 60 Hz; 110 VAC, 50 Hz.

Model 82676
Same as Model 82570 except for use with external oil supply through ½" NPT(F) oil
inlet (maximum head pressure 80 psi (5.5 bar)).
Model 82676

Model
82885

Metric
Equiv.

Lubricant/
Air Ratio

85391

.45 in³
7.4 cm³

83667
82570
82573

Max.
Output

Reservoir
Capacity

Lube
Outlet

Min.

Max

Dimensions
HxWxL

Air Valve
Required

10⅜" x 5¼" x 6"
263 x 133 x 152 mm

¼"
NPTF(F)

¼"
NPTF(F)

2.4 in³
39.3 cm³

82676

Lubricant Oper.
Press.

1¼ pint / .6 liter
36 in³ / 600cm³

4½ pint / 2 liter
123 in³ / 2000 cm³

20:1

Air
Inlet

750 psig
52 bar

1000
psig
69 bar

18½" x 5½" x 6"
470 x 140 x 152mm

3-way

17¾" x 5¾" x 18¼"
451 x 146 x 464 mm
17¾" x 5¾" x 18¼"
451 x 146 x 464 mm

4-way

18½" x 5¾" x 21"
470 x 146 x 533 mm

Remote

** Air consumption @ 100 psi is .15 CFM per stroke.
Check compatibility when using synthetic oils.

Timer Specifications for Model 82573 Only
Cycle Time

On Time

Min.

Max

Min.

Max.

20 Sec.

1000 psig / 69 bar

750 psig / 52 bar

1 Min. 24 Sec.

Note:
Refer to System Controls section for detailed timer and solenoid-operated air valve specifications.

37

Centro-Matic® Automatic Lubrication Systems
Air–Operated (Reciprocating) Oil Pumps
Model 283167
Includes 2½" air motor driven pump, vent valve assembly, translucent reservoir with
filler cap and strainer and 1200 psi (82 bar) safety unloader.
Model:
Lubricant/Air Ratio:
Output/Min. @ 100 PSI Air:
Reservoir Capacity:
Air Inlet:
Lube Outlet:
Min.
Typical System
Operating Pressure: Max.
Dimensions (HxWxL):
Air Valve Required:

283167
40:1
12 cu. in. / 197 cc
15 pint / 7.1 liter, 433 cu. in. / 7100 cc
⅛" NPTF (F)
¾" NPTF (F)
750 psig / 52 bar
1000 psig / 69 bar
23¼" x 9" x 16¼" / 591 x 229 x 413 mm
3-Way**

** Air consumption @ 100 psi is .15 CFM per stroke.

Note: Check compatibility when using synthetic oils.

Model 1826
Consists of Model 2002 PowerMaster pump, Model 85217 vent valve assembly,
Model 81675 drum cover, Model 85209 controller, air and lubricant connecting hoses
and 1200 psi (82 bar) safety unloader.
Model:
Lubricant/Air Ratio:
Output @ 75 Cycles/Min:
Drum Size:
Air Inlet:
Lube Outlet:
Min.
Typical System
Operating Pressure: Max.
Controller Electrical
Requirements:

1826
24:1
462 cu. in. / 7571 cc
U.S. standard 55-gal. refinery drum (removable head)
⅜" NPTF (F)
¾" NPTF (F)
750 psig / 52 bar
1000 psig / 69 bar
120 V 60 Hz, 110V 50 Hz

Notes:
1. See System Controls section for detailed controller specifications.
2. See Industrial Pumping catalog for basic pump specification, including air consumption.

Electric–Operated Oil Pump

Model 1848
Fully automatic assembly including pump, 220-/440-volt motor, translucent reservoir,
1200 psi (82 bar) safety unloader, adjustable pressure switch and time control. Time
control is adjustable for lubrication cycle frequency of 5, 10, 15, 20, 30 or 60 minutes.
Solid state time delay relay (35 sec. to 240 sec.) included for connection of audible or
visual alarm to signal lubrication failure due to empty reservoir or broken supply line.
Model:
Output/Min:
Reservoir Capacity:
Lube Outlet:
Pump Motor
Controller Max
Min.
Max.

Electrical
Specifications:
Typical System
Operating Pressure:
Dimensions (HxWxL):

1848
18 cu. in. / 295 cc
14.7 pint / 6.96 liter, 424 cu. in. / 6960cc
¼" NPTF (F)
220/440 VAC, 60 Hz, 3 ph
115 VAC, 60 Hz
750 psig / 52 bar
1000 psig / 69 bar
25⅜" x 13" x 1913⁄16" / 645 x 330 x 503 mm

Note: See Model 85520, System Controls section for controller specifications.

38

Centro-Matic® Automatic Lubrication Systems
Bucket Pumps
Lincoln offers 60, 90, 120, 240 or 400 lb. reservoirs for our bucket pumps. Here are the features:
• Rugged 14-gauge steel walls
• Large 1" NPT inlet for fast filling, 1¼" overflow outlet
• New 2” foam follower that virtually eliminates grease bypass
• New vent valve to bucket coupling
• Thick mounting ring that withstands severe vibration
These buckets work with hydraulic, air and electric pumps.

Eight bolts to resist
lid loosening
Weld nuts for easy lid
removal

Thick rubber seal to keep
contaminants out

1¼" overflow outlet
All buckets and followers
come ready to accept the
Lincoln grease level sensor or
overflow protection system

14-gauge steel wall
reduces denting and
follower plate hang-up
Fill tube to center of reservoir to prevent cocking of
follower plate

Stop bolts on
follower plate to
prevent cocking

Large 1"NPT fill inlet
for faster filling

2" foam follower for
better bypass protection

Thick mounting ring with
twice as many mounting
holes to resist loosening

Model 84050
A 50:1 ratio double acting air-operated pump for high-volume displacement. Supplied
with a 60-pound capacity metal reservoir with removable cover for easy filling. Includes
air-operated vent valve and 5' (1.5m) air and lubricant connecting hoses.
Model:

84050

Lubricant/Air Ratio:

50:1

Output/Min @ 100 PSIG Air:

30 cu. in. / 492 cc

Reservoir Capacity:

60 lb. / 27 kg, 1800 cu. in. / 29,500 cc

Air Inlet:

⅜" NPTF (F)

Lube Outlet:

¾" NPTF (M) at Hose

Typical System
Operating Pressure:

Min.

1200 psig / 83 bar

Max.

3500 psig / 241 bar

Dimensions (HxWxL):

31¾" x 157⁄16" x 159⁄16" / 806 x 392 x 395 mm

Filling Method:

Bulk

Reservoir:

Steel

Notes: 1. Pump requires 3-way air valve.
2. Air consumption @ 100 psi is .42 CFM per cycle
3. Optional Model 92597 follower available.

Model 85460
Same as Model 84050 except includes installed visual low level and follower plate
assembly.

39

Centro-Matic® Automatic Lubrication Systems
FlowMaster® Hydraulic Pump
High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors
with reciprocating pump tubes and flexible control features that perform in desert
heat and arctic cold. Integrated control manifold adjusts the amount of lubricant and
operating pressure. The pump’s output is adjustable from 7 to 45 cubic inches per
minute.

1¼"
NPT

1"
NPT

Supply Inlet
Hydraulic Pressure, Max.:
Operating Inlet
Hydraulic Pressure:
Hydraulic Inlet Flow:
Pump Ratio with
Manifold:

3000 psig

200 bar

300 to 420 psig
20 to 32 bar
Up to 7 gpm
28 l/min
9:1 at low inlet pressure (300 to 350 psi/20 to 25 bar)
and low inlet flow (below 2 gpm/7 lpm) pump ratio
approaches 11:1 ratio at higher inlet pressure and flow
7 - 45 in³/min
-20° to +150°F
-10° to +65°C
24 VDC
SAE 4
SAE 6
¼" NPTF

Pump Output:
Operating Temperature:
Solenoid Valve Coil:
Hydraulic Inlet Port:
Tank Return Port:
Pump Outlets:
Max. Hydraulic Fluid
Temp:

200°F

93°C

Pump Only Models
Model

Capacity
Lbs.

gal

L

85733

120

18

68

85732

60

8

30

85734

400

55

208

85731

35

5

19

85676

90

10

38

85678

60

8

30

Solenoid
Manual
Override

Adjustable
Flow Control

Adjustable
Pressure
Control

No

Yes

Yes

Yes

Fixed

Fixed

For the complete system, when ordering 120 or 400 lb. refinery drum versions also order the following:

Capacity

Model No.

120 lb.

84616

Drum Cover

85492

Follower Assembly

84990

Vent Valve Assembly

271606

Drum Cover

270982

Follower Assembly

271605

Vent Valve Assembly

400 lb.

40

Description

Centro-Matic® Automatic Lubrication Systems
FlowMaster® Hydraulic Pump

Pump and Bucket Models with Follower Plate and
Low-Level Detect
Model
85727
85725
85726

*
**

85722

Solenoid
Manual
Override

Adjustable
Flow
Control

Adjustable
Pressure
Control

No

Yes

Yes

38

Yes

Fixed

Fixed

30

No

Yes

Yes

Lbs.

Size
gal

L

120

18

68

10

38

10
8

90
60

*Includes high-level detect
**Does not include follower plate or low-level detect

Pump and Bucket Dimensions
Container
Size
35 lb.
60 lb.
90 lb.
120 lb.
400 lb.

A

Pump - in. (mm)

13.69 (348)
19.00 (483)
27.50 (699)
27.50 (699)
34.00 (864)

Pump Bucket-in. (mm)
A
B

B

24.00 (609.7)
29.31 (744.7)
37.81 (954.7)
37.81 (954.7)
44.31 (1,125.7)

14.59 (371)
19.90 (505)
28.40 (721)
28.40 (721)
34.00 (864)

19.517

16.75 for 120# container

15.090

41

24.90 (632.7)
30.20 (766.7)
40.63 (1,031.7)
40.63 (1,031.7)
45.44 (1,154.7)

Centro-Matic® Automatic Lubrication Systems
FlowMaster® Electric Pumps
It seems too good to be true, but Lincoln’s new Electric FlowMaster Pump can serve
all but the largest automated lubrication applications. Now you can take advantage
of the ease and economy of this efficient, versatile electric pump—no cost for air
associated with running the pump and no hydraulic hoses to connect.
The Electric FlowMaster Pump is a workhorse. Because you can adjust the speed of
the pump’s motor, you can adjust the pump’s output to precisely fit any application.
Lincoln offers 12 different models.
For manual lubrication, use the pump with a hose reel and a dispensing valve.

24 and 12 VDC FlowMaster®
Operating Temperature Range:
Pump Outlets:
Motor:
24 VDC
12 VDC

-40° to +150°F
14" NPTF
1/2" HP Peak
1/3” HP Peak

-40° to +65°C

Pump Only Models
5.84
(148)

Model

2.95
(75)
Power
Wires

Speed Control
Potentiometer
1/4 NPTF
Pump Outlets
both sides

8.97 (228)

85479
85748
85749
85737
85738
85747
85739
85752
85753
85754

Model
85479
85748

6.82 (173)

2.72
(69)

*

lbs

Capacity
gal

L

35
35
120
60
120
35
400
35
35
60

5
5
18
8
18
5
55
5
5
8

19
19
68
30
68
19
208
19
19
30

Power

Maximum
Speed Range
Pressure Rating
RPM
2500 psi (172 bar)

9.5-100
5-50

24 DC

12 DC

5000 psi (345 bar)
2500 psi (170 bar)
5000 psi (345 bar)
2500 psi (172 bar)
2500 psi (172 bar)
3500 psi (241 bar)

Gear Ratio

Current Draw
Amps

Min

17.8:1

2-5

0.7

6.3

1-4.2

0.4

3.5

0.7

6.3

34:1

85749

34:1

85737

19:1

85738

19:1

85747

17.8:1

2-5

85739

19:1

1-6.5

85752

19:1

85753

19:1

85754

19:1

Output: in³/min

9.5-100

Max

1-6.5

1-7.5

* Kit consisting of pump, follower, bucket cover and hardware

42

Centro-Matic® Automatic Lubrication Systems
FlowMaster® Electric Pumps
Pump and Bucket Models
Model
85728

60

85729
85730

Capacity
gal

lbs

*

8

Power

L

Maximum
Speed
Pressure Rating Range RPM

30

90

10

38

120

18

68

24 DC

Model

Gear Ratio

Current Draw
Amps

85728
85729
85730

19:1

1 - 6.5

5000 psi (345 bar)

9.5 - 100

Output: in³/min
Min
Max
0.7

6.3

Above models include follower plate and low-level detect
* Includes high-level detect

Accessories
Description
Follower plate
Drum cover
Vent valve assembly:
24 VDC
Strainer

120 lb.

400 lb.

85492
85474

270982
85475

85664
272180

85665
272180

24 VDC Electric Vent Valve
Model No.

Description

274899
276325
276903
276919
525-32083-1

IP 67 Explosion Proof Rating
IP 65 Rating
IP 65 Rating
Hardware Kit for 276903
IP 54 Rating

For all FlowMaster II pumps replaced on original
buckets, vent valve kit 278413 will be needed. This
also applies to DC FlowMasters made after 2009.

43

Centro-Matic® Automatic Lubrication Systems
FlowMaster® Electric Pumps
120/230 VAC FlowMaster®

Now you can save the cost of air and plug in our new 120/230 VAC FlowMaster pump.
Convenient and powerful, the 120/230 VAC FlowMaster pump allows you to tap into
your AC power source and pump grease from a 120 lb. or 400 lb. drum. Rely on it
to drive your automated lubrication systems such as Centro-Matic®, Mod Lube®,
Quicklub® and Two-line.
Operating Temperature Range:
Operating Voltage:

-40° to +150°F (-40° to +65°C)
120/230 VAC (50/60 Hz single phase)

Pump Outlets:
Motor:

¼" NPTF
½" HP

Pump Only Models
Model
85744
85743

lbs

Capacity
gal

L

400
120

55
18

208
68

Model

Gear Ratio

85744
85743

19:1

Power

Maximum Pressure
Rating

Speed
RPM

120-230 AC

5000 psi (345 bar)

95

Current Draw: Amps
@120 V
@230 V
1-4.6

Output: in³/min
Max

.5-2.4

6.3

Accessories
Description
Follower plate
Drum cover
Vent valve assembly: 120 VAC
230 VAC
Strainer

120 lb.
85492
85474
85662
85660
272180

400 lb.
270982
85475
85663
85661
272180

Reel-N-Flow Pump and Reel Kits
Operating Temperature
Operating Voltage:
Motor
Max. Current Draw
Max. Output
Max. Output Pressure
Pump Weight
Hose Reel Capacity

-20° to +140°F (-29° to +60°C)
24 VDC (18 min., 30 max.)
1⁄3 HP (0.25 kw)
15 AMPS
18.0 in³/min (295 (cm³/min)
6,000 psi (413.8 bar)
35 lbs. kg (15.9)
⅜" High Pressure Hose, 50 ft. (15 m)

Mounts on 35#/5-gallon refinery container

Pump Models
Model

Description

274873
274874
276041
276360

24V, Bare, high-pressure pump
24V, Bare pump with integrated pressure switch and manifold
12V, Bare high-pressure pump
12V, Bare pump with integrated pressure switch and manifold

Kit Models Note: FlowMaster kit models will NOT be discontinued
Model Description

Accessories
Model

Description

274872

10,000 psi Gauge

274934

35#/5-gal. Container Mount

pump, lid and
274886 85751
follower
274886 with hose
50' hose, control
274887 reel,
valve, swivel & 7'
connecting hose
pump, lid
276358 85753
andfollower
276358 with hose
50' hose, control
276359 reel,
valve, swivel & 7'
connecting hose

44

Bare
Pump

Lid

Follower

85751

274878

274888

85751

274878

274888

85753

274878

274888

85753

275878

274888

Reel

Connecting
Hose

Control
Vlv. &
Swivel

94553H

276366

3050,
81729

94553H

276366

3050,
81729

Centro-Matic® Automatic Lubrication Systems
FlowMaster® Electric Pumps
220 - 460 VAC, 50 Hz / 60 Hz 3 Phase
AC FlowMaster Pump
The high-performance FlowMaster product line is a new generation of pump
technology. Compact and versatile, its unique rotary drive and modular gear
set let you adjust the pump to exactly fit your application.
• Wires directly to existing AC service
• Reduces installation costs – no need to tap into hydraulic circuits or pipe in
compressed air
• Integrates easily to many styles of lubrication systems
• Heavy industry
– Mining
– Steel
– Paper

• General Industry
– Food/beverage
– Automotive
– Packaging
– And others

Pump Model:

85745

85746

Pump/Container Size:

120 lb.

400 lb.

Pump Output:

6.3 in³/min. (103 cm³/min.)

Operating Temperature:

-40° to 150°F (-40° to 65°C)

Motor Max. Temperature:

Up to 220°F (105°C)

Operating Voltage:

3 Phase / 220 - 420 @ 50 Hz / 230 - 460 @ 60 Hz

Motor Power:

½ Hp

Pump Outlet:

¼" NPTF

Accessories
Description

120 lb.

400 lb.

Follower plate

85492

270982

Drum cover

85474

85475

Vent valve assembly

85660

85661

Strainer

272180

272180

45

Centro-Matic® Automatic Lubrication Systems
Hydraulic-Powered Grease Pumps
Model 84944
Hydraulic-operated pump with 60 lb. metal reservoir and vent valve.
Model:

84944

Nominal Lubricant/
Hydraulic Pressure Ratio:

16:1

Output/Min @ 30 Cycles/Min:

11 cu. in. / 180 cc

Reservoir Capacity:

60 lb. / 27 kg ,1800 cu. in. / 29,500 cc

Hydraulic Inlet/Outlet:

¼" NPTF (M)

Lube Outlet:

¾" NPTF (M)

Important Note:
1. Pumps require a timed electrical signal to operate. Use Model 244270 (not potted) or
249605 (potted) Cycle Timer. See System Controls section for specifications.
2. Included hydraulic solenoids require 24 VDC.

Model 84961
Model 84944

Basic pump only for Model 84944. Includes pump and hydraulic control. Does not
include reservoir or vent valve.

Model 84960
Hydraulic pump for use with U.S. standard 120 lb. refinery drum. System components
(pump, vent assembly, drum cover and follower plate) must be ordered separately.

Model 84962
Hydraulic pump for custom lubricant container installations. Pump length is sized for
U.S. standard 400 lb. refinery drum depth.
Model

Nominal Lubricant/
Output/Min @
Hydraulic Pressure Ratio 30 Cycles/Min

84960
84962

Model 84960

11 in³
180 cm³

16:1

Lube
Outlet
¼"
NPTF(F)

Pump Tube Pump Tube
Length
Diameter
-

-

33 / "
862 mm

1"
25.4 mm

15 16

Important Note:
1. Pumps require a timed electrical signal to operate. Use Model 244270 (not potted) or
249605 (potted) Cycle Timer. See System Controls section for specifications.
2. Included hydraulic solenoids require 24 VDC. Use Vent Assembly Model 84990; Drum Cover
Model 84616 and Follower Plate Model 83371. Drum Cover and Follower Plate are for use with
Model 84960 only.

Hydraulic Power Supply Requirements
Hydraulic Inlet
Flow Rate @
Fluid
Ambient Operating
Filtration
Pressure psig / bar 30 Cycles/Min. Max. Inlet Temperature Range
Requirement
GPM
ltrs/min
Temperature
Min
Max
Min
Max
300 /
21

3000 /
207

1.0 /
3.8

210°F
99°C

-40°F
-40°C

+135°F
57°C

10
Micron

Note:
All pumps have a hydraulic pressure reducing valve rated for 60 psi (4 bar) to 800 psi (55 bar) output.
Maximum input is 3000 psi (207 bar).

Model 84962

46

Centro-Matic® Automatic Lubrication Systems
Airless Spray System

Airless Spray High-Pressure System
No air required—three words describe why Lincoln’s innovative new Airless Spray
System is the only system of its kind on the market. But it takes many more words
to list all the benefits the latest in Lincoln’s long line of technological advances has
to offer. Because no air is required, the Airless Spray System means that mining,
concrete, steel and other heavy industries can look forward to dependable, highpressure lubricant spraying that’s low-maintenance and cost-effective.

85418 Airless Spray Valve
Model 85418

Model

Operating Voltage

Solenoid Valve Initial Current

Heater Current

85418

115 VAC

.18 Amps

1.80 Amps

Spray Tips
Model

Std Spray Std Tip with Roto-Clean Roto-Clean Tip
Tip
Swivel
Tip
with Swivel*

252790

Retaining Nut

Required

252792

Jet Stabilizer

Optional

Optional

Optional

Optional

Std. Spray Tip

Required

Required

Not Required

Not Required

Optional

Required

85423

Controller

Descrip.

**

Not Required Not Required

Not Required

271579

Swivel Assy

Optional

Required

252831

Body

Not Required Not Required

Required

Required

Roto-Clean Tip

Not Required Not Required

Required

Required

85427

**

* Discard tip retaining nut and protective cover, supplied with swivel assembly, when installing the roto-clean tip on
a swivel assembly.
** See chart below for spray tip models

Standard Carbide Spray Tips
Model
Model
85423-5001
85423-6501
85423-6502
85423-8001
85423-8002
85423-9501
85423-9502
85423-11001

Roto-Clean Carbide Spray Tips
Model
Model

85423-11003
85423-11004
85423-650067
85423-800067
85423-950080
85423-1100067
85423-1100080

85427-5001
85427-6501
85427-6502
85427-8001
85423-8002

85427-9501
85427-9502
85427-650067
85427-800067
85427-1100067

Pumps
Lincoln offers many pump options for supplying lubricant to the lube system. Airoperated pumps are preferred when possible due to their versatility and wide range
of selection. Hydraulic and electric pumps are also available. The pump must be
capable of pumping the lubricant to a minimum of 3500 psi at the airless spray
valve.

Filters
Model 85419

Model 84111

Model

Description

85419

Dual filter panel with operator valve to select one of the two 84111 filters. The other
filter is isolated from the system pressure for uninterrupted service and easy element
replacement

84111

High-pressure, single in-line filter (recommended) 238 micon (60 MESH)

84004

Single in-line filter 140 micon (100 MESH)

47

Centro-Matic® Automatic Lubrication Systems
Airless Spray System

Controllers

Control
Wiring
Harness
Assembly

Pumps

Filters
Airless
Spray
Valve
Spray
Tips
High-Pressure Grease
Supply Line

Controllers
Model

Description

254120

For single and dual Airless systems. Operates system by setting the time between
lubrication events. Includes manual lube button and system alarm.

256228

For single Airless system with external initiate contacts with manual lube button and
system alarm

254815

For dual Airless system with external initiate contacts with manual lube button
and system alarm

Control Wiring Harness Assembly
Model
256241

Description
25’ wiring harness connects the controller to each spray valve.
One wiring assembly is required for each spray valve.

High Pressure Grease Supply Line
To be furnished by installer

2-Way Fluid Solenoid Valve
Model
272285

Description
For multiple machine/single pump applications. See design guide (form #403172) for
details.

48

Centro-Matic® Automatic Lubrication Systems
Pump Accessories

Clean filter
Clogged
filter

High-Pressure, High-Flow Filter Designed Specifically for
the Mining, Off-Highway And Industrial Markets
Features and Benefits
• Clogged filter indicator with quick reset
– Red indicator pin is triggered when the filter element is almost
completely clogged
– If the filter element becomes completely clogged, the grease will safely
vent to the atmosphere, preventing contaminated grease from entering
the reservoir
• Promotes cost-effective preventative maintenance
• Custom-designed filter element
• Allows for easy and quick cleaning or replacement
• Virtually crush proof element; available in both 250 and 470 micron steel
screen sizes
• Durable ductile iron body construction
• 4500 psi (310 bar) pressure rating
• 10 gal./min. (38 liter/min.) maximum flow rate
• Three mounting points for stability
Model

Description

276492

250 micron filter

276492A

470 micron filter

282007

250 micron filter element

282008

470 micron filter element

Reservoir Low-Level Alarm Kits
Low-level kits signal need to fill reservoir
Model

83671

Lubricant
Use with Models
Type

Grease

82653, 82655, 83668,
83800, 83834, 83167,
83599, 1833, 1835,
1849, 85434, 85435,
85436, 85437, 85444,
85445
82570, 82573, 83667,
283167, 1848, 85430
85431, 85440, 85441

83696

Oil

84629

Grease

84960

85490
249608

Grease
Grease

84050
84050 new style

Switch Switch Capacity
Type
Voltage (Amps)

SPDT

125 VAC (15)
250 VAC (15)
480 VAC (15)
24 VDC (2)
125 VDC (½)
250 VDC (¼)

None

-

Feature

Connect to machine
control or visual/
audible alarm circuit.

Includes follower
for U.S. Std. 120 lb.
drum.
Includes follower,
visual indication only.

Follower Plates
Recommended when pumping lubricants that do not readily seek their own level.
Model

Use with Pump Model

Container Size

83370

87240, 87228

Standard U.S. 400 lb. refinery drum

83371

1823, 282288, 84960

Standard U.S. 120 lb. refinery drum

92544

1828, 1830

Standard U.S. 120 lb. refinery drum

92597

84050, 84944

Lincoln 60 lb. container

252725

85483

Lincoln 35 lb. unit

85489

85481

Lincoln 60 lb. unit

49

Centro-Matic® Automatic Lubrication Systems
Pump Accessories

In-Line Lubricant Filters
Filters mount in pump outlet before vent valve on reciprocating pump systems.
Removes solid contaminants before delivering lubricants to the supply line.
Part
No.

Model 84004,
84523

Element Size
micron

84004

140

84528

570

* 84239

10

Maximum Pressure

Connections in.

Hex Body Size - in.

5000 psig / 340 bar

½ NPTF (M)

¼

6000 psig / 408 bar

¼ NPTF (F)

1¼

* In-line filter with flouroelastomer seal.

Automatic Filling System Pressure Regulator
Pressurized systems automatically keep up to eight, single stroke oil pump reservoirs
full at all times. Use with reservoir seal kits below. Fill pump not included.
Fill Pump
Requirements
Model

Max. *
Max.
psig / bar Ratio

83372

125 / 8.6

3:1

Fill System Requirements
Lubricant
Reservoir Inlet/Outlet Vent Outlet
Pressure
5⁄8" Tube 3⁄8" Tube psig / bar
Max. Length

100'/ 30.5m 55'/16.8m

5 /.34

½" NPT(F)

¼" NPTF(F)

* Indicates maximum lubricant output pressure.

Pressure Kits
Seal reservoirs for automatic filling.
Model

Use with Pump Models

83368

82885

83637

82570, 82573

Manual Filling Pumps
Designed to provide a fast, clean method of filling Centro-Matic pumps with a selfcontained reservoir without the risk of lubricant contamination.
Model

81834

1254

Dimensions - in. / mm
Lubricant Lubricant Container Hose Lubricant
Container
Type
Output Capacity Length
Outlet
Height Width
Diameter
Grease
NLGI #1
Max

1 oz/stroke
1.9 cu. in.
31 cc

30 lbs.
14.2 L

7'
2.1 m

645006
Hydraulic
Coupler

Oil

1 pint/ 7
strokes 473
cc

30 pints
14.2 L

5'
1.5 m

80599 NonDrip Nozzle

50

26¾
679

14
356

9
229

Centro-Matic® Automatic Lubrication Systems
Pump Accessories

Metal Reservoirs: Rectangular reservoirs for gravity
feed oil pumps
Standard ⅜" NPTF outlet furnished for gravity-fed pumps. Features spring loaded cap
with strainer, sight gauge and Buna-N O-rings. Model 84376 Sight Gauge Kit available
for use with synthetic oil.
Capacity
Model

gal

liter

87417

5

19

87418

3

11.3

87419

1.5

5.7

Dimensions
Height Height Width Width Depth Depth
in
mm
in.
mm
in
mm

Lubricant
Outlet
⅜" NPTF (F)

10⅛

257

17½

446

12½

318

13½

343

11½

292

10½

267

7½

191

Cylindrical Reservoir
Four-gallon steel tank-type reservoir consisting of Model 82700 tank and Model 82612
mounting brackets. Incorporates large filler opening with screw cap.
Model

Tank
Number

Bracket
Number

Capacity

Lubricant
Output

82621

82700

82612

4 gal. / 15.1L

½' NPT (F)

Dimensions - in. / mm
Height

Diameter

18 / 457

9 / 229

Ultrasonic Sensor
Ultrasonic High/Low Sensor to make it easier to know when the 60 lb. Centro-Matic®
automated lubrication system reservoir is getting low on lubricant and when it’s refilled
to capacity. Sensor detects the position of the follower plate with ultrasonic waves to
report the lubricant level. The sensor is factory programmed for a 60 lb. reservoir. Its
two outputs drive external signaling devices or connect with a customer’s PLC. Three
standard LEDs offer visual indication of the sensor’s sensor status and reservoir level.
Model

Description

270782

Ultrasonic sensor

270781

Ultrasonic sensor socket (required)

Ambient
Power Supply
Current
Protection
Temp. Range
Operating Range less load
-13°F to 158°F
-25°C to 70°C

IP65

51

20 - 30 VDC

60 mA

Switching Outputs
Max.
Current
200 mA

High
Level

Low
Level

NO
NO
contact
contact
(closes
(opens
when full) when low)

Centro-Matic® Automatic Lubrication Systems
System Controls

Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several
different models may be chosen to control power-operated pumps, depending on the degree of automation and monitoring
required. Your Lincoln representative will assist you in specifying the correct model.
Options range from simple timers to fully-automated system controllers and monitors. Basic timers allow you to set the
interval between lubrication cycles. More sophisticated monitors control the frequency of lubrication, oversee system
performance while showing system status and alarms on a LCD display panel. Monitors may be interfaced with machine
control systems to protect your equipment from harm .
You may customize your installation with air and lubricant filters to prolong system life, pressure gauges for monitoring,
shut-off valves to ease future maintenance and even automated filling systems to utilize bulk lubricant storage.
All of these possibilities, and more, have made Lincoln Automated Lubrication Systems the choice of industry for over 80
years.

Model 84501 Program Timer—Solid State
Designed to control the lubrication cycle frequency of air-operated single-stroke
pumps. Timer turns pump on/off at programmed intervals via a 3-way or 4-way air
solenoid valve (not included) installed in the air line to pump.
Off Time
(Cycle Time)

On Time
(Pumping Time)

Min.

Max.

Min.

Max.

20 Sec.

24 Hrs.

10 Sec.

1 Min.
24 Sec.

Built-In Program
Options

Approvals

Switch Capacity

120/230 VAC
50/60 Hz

UL, CSA

120 VAC, 5 Amps /
230 VAC, 1.5 Amps

Ambient Operating
Temperature Range

Enclosure

3 Hr. Program Prelube
Rating
Memory
Function
Yes / No

Power
Requirement

Yes / No

Dimensions-in. / mm
Height

Width

Depth

Minimum Maximum

NEMA #1 8¼ / 210 613⁄16 / 173 415⁄16 / 125 0°F /-18°C 130°F/54°C

Note:
Refer to Technical Manual for a full explanation of available program options.

Model 84511 Economy Timer for
Single Stroke Pumps
Uses a timing motor, cam and switch to turn pump off and on. NEMA 1 enclosure,
UL and CSA listed. Switch capacity 10 amps non-inductive.
Off Time
(Cycle Time)

On Time
(Pumping Time)

Min.

Max.

Min.

Max.

5
Min.

1 Hr.

30 Sec.

90 Sec.

Power
Requirement

Approvals

Switch
Capacity

120 VAC, 60Hz

UL, CSA

10 Amps

Note: Off-time selectable in 5 minute intervals.

Enclosure
Rating
NEMA 1

Dimensions - in. / mm
Height

Width

Depth

5 / 127

3¼ / 82.5

3½ / 89

52

Centro-Matic® Automatic Lubrication Systems
System Controls

Model 84015 Timer—12-24V DC
Solid-state microprocessor-based controller for automated lubrication systems on
mobile equipment or where AC power is not available. Rugged construction with
liquid- and dust-tight enclosure. Includes manual push-button for remote initiation
of a lube cycle.
Off Time** (Cycle Time)
Max.

Fixed On Time
(Pumping Time)

Power
Requirement

Switch
Capacity

80 Min.

75 Sec.

10-30 VDC 25 MA*

5 Amps

Min.
2.5 Min.
* Less load.

** Available selections are 2.5, 5, 10, 20, 40 or 80 minutes.

Enclosure
Rating
NEMA
12

Ambient Operating Temperature Range

Dimensions-in. / mm
Height

Width

Depth

5¼ / 133

3⅛ / 79

3 / 76

Minimum

Maximum

0°F / -18°C

131°F / 55°C

Model 85520 Programmable Controller
Microprocessor-controlled, 120 volt AC unit is fully programmable. Controller has a
wider off-time range than timers and a memory switch to turn pre-lube option on or off.
Off Time
(Cycle Time)

On Time
(Pumping Time)

Min.

Max.

Min.

Max.

30 Sec.

30 Hours

30 Sec.

300 Sec.

Enclosure
Rating
NEMA 12

Power
Requirements

120 VAC
50/60 Hz

Switch Capacity
Inductive Load
at 120VAC
Load
Relay

Alarm
Relay

2 Amps

2 Amps

Ambient Operating Temperature Range

Dimensions-in. / mm
Height

Width

Depth

7½ / 191

415⁄16 / 125

3½ / 89

Minimum

Maximum

-13°F / -18°C

150°F / 55°C

Model 85525 Programmable Controller
Same as Model 85520 except includes pressure switch and mounting brackets.

Model 85535 System Controller—24V DC
Same as Model 85520 except is a 24-volt DC - max “on” time = 2 min.

53

Centro-Matic® Automatic Lubrication Systems
System Controls

Model 85530 Lubrication System Controller
Controls lubrication frequency and monitors supply line pressure. The LCD displays
operating status.
Lube Cycle
Timer Mode
Off Time

Max
Count
Rate*

Counter Mode
Off Counts

Min.

Max.

Min.

1 Minute

9,900 Minutes

1 Count

Pumping Time
Before Alarm
Min.

Max.

Max.
30/Sec. @
99,000 Counts 50% Duty 1 Minute
Cycle

9,900
Minutes

* Minimum duration of count signal is 33 milliseconds.

Power Requirements
(less load)
Voltage

Current

120 VAC, 50/60 Hz

85 MA

230 VAC, 50/60 HZ

45 MA

24 VDC

250 MA

Pump,
Solenoid,
or Alarm
Capacity

Enclosure
Ambient
Temperature
Dimensions-in. / mm
Range
Rating
Height Width Depth

360 VA

32° to 122°F
-0° to +50° C

NEMA
12

815⁄16
227

9½
241

41⁄8
105

5 Amps

Note: Model 85530 is CSA/NRTL approved.

Model 85209 Panel Mounted Pneumatic
Control System
Panel mounted units control lubrication frequency and monitor supply line pressure.
Includes Model 85530 Controller (specifications above), Model 69630 Pressure Switch
and solenoid-operated air valve.
Lube Cycle
Timer Mode
Off Time

Counter Mode
Off Counts

Min.

Max.

Min.

Max.

1 Minute

9,900
Minutes

1 Count

99,000
Counts

Power Requirements
Voltage

Current
(less load)

120 VAC, 60 Hz
110 VAC, 50 Hz

47 VA

Max
Count
Rate*

30/
Sec.

Pumping Time
Before Alarm
Min.

Air

1
9,900
⅜"
Minute Minutes NPTF(F)

Lube
¾"
NPTF(F)

Panel Dimensions
in. / mm

External Alarm
Load Capacity

Ambient
Temperature
Range

Height

Width

360 VA

32° to 122°F
0° to +50°C

12 /
305

18¼ /
464

Model 85208
Same as Model 85209 except 220 VAC, 50-60 Hz power.

54

Max.

Connections

Centro-Matic® Automatic Lubrication Systems
System Controls

Model 247333 Pressure Transducer
Pressure Transducer signals actual system pressure. Comes with 72 inch (1.8m) shielded
24-gauge connecting wire. Maximum length of wire between transducer and monitor is 30 ft.
(9.1 m).
Range Accuracy
0 to
4000 psi
276 bar

±1%

Proof

7500 psig
517 bar

Pressure
Connection
¼" NPT
Male Thread

Ambient
Temp.

Input

Voltage
Output

-20° to 180° F 10 to 30
1-6 VDC
-29° to 82° C
VDC

Offset Enclosure

1 VDC

NEMA 4X
Rating
300 Series
Stainless
Steel

Electric Solenoid-Operated Air Valves
Electrical Characteristics

Model Type

Air
Ambient
Max.
Inrush Holding Inlet/ Temperature Cv Pressure Conduit
Power
Factor
Connection
Current Current Outlet
Range
psi / bar
Requirements
Amps Amps

350244

110 VAC, 50 Hz
120 VAC, 60 Hz
8.4 VA

.11

350245

220 VAC, 50 Hz
240 VAC, 60 Hz
8.4 VA

.055

350241

110 VAC, 50 Hz
120 VAC, 60 Hz
8.4 VA

.11

.07

220 VAC, 50 Hz
350242 3-Way 240 VAC, 60 Hz
8.4 VA

.055

.035

4-Way

350282

12 VDC 6 Watts

350283

24 VDC 6 Watts

68586 2-Way
274398
244727

.07
0° to 120°F
-18° to 49°C

1.2

.035
¼
NPT(F)

½" NPS(F)

.18
0° to 140°F
-18° to 60°C

150 / 10.3

N/A

N/A

⅛"
NPT(F)

120V, 60 Hz 12
VA

.2

.1

⅜"
NPT(F)

2.4

½" NPT(F)

24 VDC 8.5
Watts

N/A

N/A

¼"
NPT(F)

.5

N/A

.12

.09

⅜"
NPT(F)

4.4

½" NPT(F)

3-Way 110 VAC, 50 Hz
120 VAC, 60 Hz
11 VA

0° to 120°F
-18° to 49°C

N/A

Model 249605 Sealed Cycle Timer
Sealed timer attaches to Lincoln 16:1 Hydraulic Pumps and generates timed pulse signal to
control pump reciprocating cycle rate.
Power
Requirement
24 VDC

Cycle Rate/Minute
Min.

Max

6

60

55

Centro-Matic® Automatic Lubrication Systems
System Controls
End-of-Line Monitors
Designed to detect system pressure utilizing normally open or normally closed switch.
Model
83898
83899

Switch
Rating
125, 250
480 VAC,
15 Amps

Operating Range psig / bar
Min.

Max

1200 / 83

2500 / 172

700 / 48

1150 / 79

Lube
Inlet
¼"
NPTF(F)

Dimensions in / mm
Height

Width

5¾ / 146

2¼ / 57

Conduit
Connection
½" NPSM

Model 69630 Pressure Switch
Senses supply line pressure rise/fall to signal system operation to controller or
system alarm.
Switch Capacity
Type
AC
10 Amps at
Single
125, 250 or
Contact
480 VDC

DC
15Amps@6VDC
5Amps@24VDC .03
Amps@ 250 VDC

Adjustable Range - psig
/ bar
Decreasing Increasing
Min Max Min. Max.
250 / 2775 / 280 /
17
191
19

3000
/ 207

Connections
Lube
¼"
NPT(F)

Note: Pressure switch has a NEMA 3 housing and UL listed switching elements.

56

Electrical
⁄ " hole for
½" conduit
connector

27 32

Centro-Matic® Automatic Lubrication Systems
Numerical Index
Model No.

Page No.

P603S . . . . . . . . . . . . . . . . . . . . .  28, 29
P653S . . . . . . . . . . . . . . . . . .  25, 26, 27
SL-1 . . . . . . . . . . . . . . . . . . . . . . . . . .  10
SL-11 . . . . . . . . . . . . . . . . . . . . . . . . .  11
SL-32 . . . . . . . . . . . . . . . . . . . . . . . . . .  6
SL-32HV  . . . . . . . . . . . . . . . . . . . . . . .  7
SL-32 METRIC  . . . . . . . . . . . . . . . . .  16
SL-33 . . . . . . . . . . . . . . . . . . . . . . . . . .  5
SL-33 METRIC  . . . . . . . . . . . . . . . . .  16
SL-41 . . . . . . . . . . . . . . . . . . . . . . . . .  14
SL-42 . . . . . . . . . . . . . . . . . . . . . . . . .  12
SL-42 METRIC  . . . . . . . . . . . . . . . . .  16
SL-43 . . . . . . . . . . . . . . . . . . . . . . . . .  13
SL-44 . . . . . . . . . . . . . . . . . . . . . . . . .  15
SL-V . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
SL-V XL . . . . . . . . . . . . . . . . . . . . . . . .  9
525-32083-1 . . . . . . . . . . . . . . . . . . .  43
645-41062-3 . . . . . . . . . . . . . . . . . . .  28
645-41062-4 . . . . . . . . . . . . . . . . . . .  28
645-41062-7 . . . . . . . . . . . . . . . . . . .  28
645-41062-8 . . . . . . . . . . . . . . . . . . .  28
645-41062-9 . . . . . . . . . . . . . . . . . . .  28
645-41064-2 . . . . . . . . . . . . . . . . . . .  28
645-41064-3 . . . . . . . . . . . . . . . . . . .  28
645-41064-4 . . . . . . . . . . . . . . . . . . .  28
645-41064-6 . . . . . . . . . . . . . . . . . . .  28
645-41064-7 . . . . . . . . . . . . . . . . . . .  28
645-41064-8 . . . . . . . . . . . . . . . . . . .  28
645-41073-5 . . . . . . . . . . . . . . . . . . .  28
645-41110-2 . . . . . . . . . . . . . . . . . . .  28
645-41110-3 . . . . . . . . . . . . . . . . . . .  28
645-41119-1 . . . . . . . . . . . . . . . . . . .  28
645-41119-2 . . . . . . . . . . . . . . . . . . .  28
645-41175-5 . . . . . . . . . . . . . . . . . . .  28
1254  . . . . . . . . . . . . . . . . . . . . . . . . .  50
1810  . . . . . . . . . . . . . . . . . . . . . . . . .  30
1812  . . . . . . . . . . . . . . . . . . . . . . . . .  35
1823  . . . . . . . . . . . . . . . . . . . . . .  34, 49
1826  . . . . . . . . . . . . . . . . . . . . . . . . .  38
1827  . . . . . . . . . . . . . . . . . . . . . . . . .  34
1828  . . . . . . . . . . . . . . . . . . . . . .  34, 49
1829  . . . . . . . . . . . . . . . . . . . . . . . . .  34
1830  . . . . . . . . . . . . . . . . . . . . . . . . .  49
1833  . . . . . . . . . . . . . . . . . . . . . .  35, 49
1835  . . . . . . . . . . . . . . . . . . . . . .  35, 49
1848  . . . . . . . . . . . . . . . . . . . . . .  38, 49
1849  . . . . . . . . . . . . . . . . . . . . . .  35, 49
2002  . . . . . . . . . . . . . . . . . . . . . . . . .  38
2004 . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2008  . . . . . . . . . . . . . . . . . . . . . . . . .  34
2010  . . . . . . . . . . . . . . . . . . . . . . . . .  34
3050 . . . . . . . . . . . . . . . . . . . . . . . . . . 44
12511  . . . . . . . . . . . . . . . . . . . . . . . .  18

Model No.

Page No.

12511-9  . . . . . . . . . . . . . . . . . . . . . .  18
12698  . . . . . . . . . . . . . . . . . . . . . . . .  18
12698-9  . . . . . . . . . . . . . . . . . . . . . .  18
14988  . . . . . . . . . . . . . . . . . . . . . . . .  17
14991  . . . . . . . . . . . . . . . . . . . . . . . .  17
66260  . . . . . . . . . . . . . . . . . . . . . . . .  18
66260-9  . . . . . . . . . . . . . . . . . . . . . .  18
66713  . . . . . . . . . . . . . . . . . . . . . . . .  18
67007  . . . . . . . . . . . . . . . . . . . . . . . .  18
67007-9  . . . . . . . . . . . . . . . . . . . . . .  18
67044  . . . . . . . . . . . . . . . . . . . . . . . .  18
68421  . . . . . . . . . . . . . . . . . . . . . . . .  18
68483  . . . . . . . . . . . . . . . . . . . . . . . .  17
68586  . . . . . . . . . . . . . . . . . . . . . . . .  55
68587  . . . . . . . . . . . . . . . . . . . . . . . .  18
68874  . . . . . . . . . . . . . . . . . . . . . . . .  18
69456  . . . . . . . . . . . . . . . . . . . . . . . .  18
69630  . . . . . . . . . . . . . . . . . . . . .  54, 56
80072 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80073 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80074 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80075 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80076 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80077 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80078 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80079 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80080 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80081 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80082 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80083 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80084 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80085 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80086 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80087 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80088 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80089 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80090 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80091 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80105 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80106 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80107 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80108 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80109 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80110 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80111 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80112 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80120 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80121 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80122 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80127 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80128 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80129 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80130 . . . . . . . . . . . . . . . . . . . . . . . . . 27

57

Model No.

Page No.

80131 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80134 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80135 . . . . . . . . . . . . . . . . . . . . . . . . . 27
80599  . . . . . . . . . . . . . . . . . . . . . . . .  50
81646  . . . . . . . . . . . . . . . . . . . . . . . .  17
81675  . . . . . . . . . . . . . . . . . . . . .  34, 38
81713  . . . . . . . . . . . . . . . . . . . . . . . .  10
81713A  . . . . . . . . . . . . . . . . . . . . . . .  10
81729 . . . . . . . . . . . . . . . . . . . . . . . . . 44
81770-1  . . . . . . . . . . . . . . . . . . . . . .  10
81770-2  . . . . . . . . . . . . . . . . . . . . . .  10
81770-3  . . . . . . . . . . . . . . . . . . . . . .  10
81770-4  . . . . . . . . . . . . . . . . . . . . . .  10
81770-5  . . . . . . . . . . . . . . . . . . . . . .  10
81770-6  . . . . . . . . . . . . . . . . . . . . . .  10
81834  . . . . . . . . . . . .  30, 32, 33, 35, 50
82272  . . . . . . . . . . . . . . . . . . . . . . . .  18
82292 . . . . . . . . . . . . . . . . . . . . . . . . . 14
82294-1  . . . . . . . . . . . . . . . . . . . . . .  14
82294-2  . . . . . . . . . . . . . . . . . . . . . .  14
82294-3  . . . . . . . . . . . . . . . . . . . . . .  14
82294-4  . . . . . . . . . . . . . . . . . . . . . .  14
82294-5  . . . . . . . . . . . . . . . . . . . . . .  14
82295  . . . . . . . . . . . . . . . . . . . . . . . .  14
82570  . . . . . . . . . . . . . . . . . . . . .  37, 50
82573  . . . . . . . . . . . . . . . . . . . . .  37, 50
82612  . . . . . . . . . . . . . . . . . . . . . . . .  51
82621  . . . . . . . . . . . . . . . . . . . . . . . .  51
82653  . . . . . . . . . . . . . . . . . . . . .  32, 49
82655  . . . . . . . . . . . . . . . . . . . . .  32, 49
82676  . . . . . . . . . . . . . . . . . . . . . . . .  37
82700  . . . . . . . . . . . . . . . . . . . . . . . .  51
82885  . . . . . . . . . . . . . . . . . . . . .  37, 50
82886  . . . . . . . . . . . . . . . . . . . . . . . .  32
83167  . . . . . . . . . . . . . . . . . . . . .  33, 49
83272  . . . . . . . . . . . . . . . . . . . . . . . .  17
83309-1 . . . . . . . . . . . . . . . . . . . . . . . .  5
83309-2  . . . . . . . . . . . . . . . . . . . . . . .  5
83309-3  . . . . . . . . . . . . . . . . . . . . . . .  5
83309-4  . . . . . . . . . . . . . . . . . . . . . . .  5
83309-5  . . . . . . . . . . . . . . . . . . . . . . .  5
83309-6  . . . . . . . . . . . . . . . . . . . . . . .  5
83311-1  . . . . . . . . . . . . . . . . . . . . . .  12
83311-2  . . . . . . . . . . . . . . . . . . . . . .  12
83311-3  . . . . . . . . . . . . . . . . . . . . . .  12
83311-4  . . . . . . . . . . . . . . . . . . . . . .  12
83311-5  . . . . . . . . . . . . . . . . . . . . . .  12
83311-6  . . . . . . . . . . . . . . . . . . . . . .  12
83311-10  . . . . . . . . . . . . . . . . . . . . .  12
83311-15  . . . . . . . . . . . . . . . . . . . . .  12
83313  . . . . . . . . . . . . . . . . . . . . . . . .  12
83314  . . . . . . . . . . . . . . . . . . . . . . . . .  5
83314-9  . . . . . . . . . . . . . . . . . . . . . . .  5

Centro-Matic® Automatic Lubrication Systems
Numerical Index
Model No.

Page No.

83336-1  . . . . . . . . . . . . . . . . . . . . . . .  6
83336HV-1 . . . . . . . . . . . . . . . . . . . . . .  7
83336-2  . . . . . . . . . . . . . . . . . . . . . . .  6
83336HV-2 . . . . . . . . . . . . . . . . . . . . . .  7
83336-3  . . . . . . . . . . . . . . . . . . . . . . .  6
83336HV-3 . . . . . . . . . . . . . . . . . . . . . .  7
83336-4  . . . . . . . . . . . . . . . . . . . . . . .  6
83336HV-4 . . . . . . . . . . . . . . . . . . . . . .  7
83336HV-5 . . . . . . . . . . . . . . . . . . . . . .  7
83336HV-6 . . . . . . . . . . . . . . . . . . . . . .  7
83336HV-7 . . . . . . . . . . . . . . . . . . . . . .  7
83336HV-8 . . . . . . . . . . . . . . . . . . . . . .  7
83336HV-9 . . . . . . . . . . . . . . . . . . . . . .  7
83336HV-10 . . . . . . . . . . . . . . . . . . . . .  7
83337  . . . . . . . . . . . . . . . . . . . . . . . . .  6
83337HV . . . . . . . . . . . . . . . . . . . . . . .  7
83337-9  . . . . . . . . . . . . . . . . . . . . . . .  6
83338  . . . . . . . . . . . . . . . . . . . . . . . . .  6
83338HV . . . . . . . . . . . . . . . . . . . . . . .  7
83447 . . . . . . . . . . . . . . . . . . . . . . . . . 34
83368  . . . . . . . . . . . . . . . . . . . . . . . .  50
83370  . . . . . . . . . . . . . . . . . . . . . . . .  49
83371  . . . . . . . . . . . . . . . . . .  34, 46, 49
83372  . . . . . . . . . . . . . . . . . . . . . . . .  50
83535  . . . . . . . . . . . . . . . . . . . . . . . .  12
83599  . . . . . . . . . . . . . . . . . . . . .  33, 49
83637  . . . . . . . . . . . . . . . . . . . . . . . .  50
83661-2  . . . . . . . . . . . . . . . . . . . . . .  13
83661-3  . . . . . . . . . . . . . . . . . . . . . .  13
83661-4  . . . . . . . . . . . . . . . . . . . . . .  13
83660  . . . . . . . . . . . . . . . . . . . . . . . .  13
83661-1  . . . . . . . . . . . . . . . . . . . . . .  13
83667  . . . . . . . . . . . . . . . . . . . . .  37, 49
83668  . . . . . . . . . . . . . . . . . . . . .  32, 49
83671  . . . . . . . . . . . . . . . . . . . . . . . .  49
83696  . . . . . . . . . . . . . . . . . . . . . . . .  49
83715-1  . . . . . . . . . . . . . . . . . . . . . . .  5
83715-2  . . . . . . . . . . . . . . . . . . . . . . .  5
83715-3  . . . . . . . . . . . . . . . . . . . . . . .  5
83715-4  . . . . . . . . . . . . . . . . . . . . . . .  5
83715-6  . . . . . . . . . . . . . . . . . . . . . . .  5
83715-7  . . . . . . . . . . . . . . . . . . . . . . .  5
83724-1  . . . . . . . . . . . . . . . . . . . . . . .  6
83724-2  . . . . . . . . . . . . . . . . . . . . . . .  6
83724-3  . . . . . . . . . . . . . . . . . . . . . . .  6
83724-4  . . . . . . . . . . . . . . . . . . . . . . .  6
83730  . . . . . . . . . . . . . . . . . . . . . . . .  17
83748  . . . . . . . . . . . . . . . . . . . . . . . .  15
83749-1  . . . . . . . . . . . . . . . . . . . . . .  15
83749-2  . . . . . . . . . . . . . . . . . . . . . .  15
83749-3  . . . . . . . . . . . . . . . . . . . . . .  15
83749-4  . . . . . . . . . . . . . . . . . . . . . .  15
83749-5  . . . . . . . . . . . . . . . . . . . . . .  15

Model No.

Page No.

83800  . . . . . . . . . . . . . . . . . . . . .  32, 49
83817  . . . . . . . . . . . . . . . . . . . . . . . .  30
83834  . . . . . . . . . . . . . . . . . . . . .  32, 49
83898  . . . . . . . . . . . . . . . . . . . . . . . .  56
83899  . . . . . . . . . . . . . . . . . . . . . . . .  56
83900  . . . . . . . . . . . . . . . . . . . . . . . . .  5
83900-9  . . . . . . . . . . . . . . . . . . . . . . .  5
83924  . . . . . . . . . . . . . . . . . . . . . . . .  18
83924-9  . . . . . . . . . . . . . . . . . . . . . .  18
84004  . . . . . . . . . . . . . . . . . . . . .  47, 50
84015  . . . . . . . . . . . . . . . . . . . . . . . .  53
84034  . . . . . . . . . . . . . . . . . . . . . . . .  34
84048  . . . . . . . . . . . . . . . . . . . . . . . .  12
84050  . . . . . . . . . . . . . . . . . . . . .  39, 49
84110  . . . . . . . . . . . . . . . . . . . . . . . .  13
84111  . . . . . . . . . . . . . . . . . . . . . . . .  47
84195  . . . . . . . . . . . . . . . . . . . . . . . .  17
84200  . . . . . . . . . . . . . . . . . . . . . . . .  17
84203  . . . . . . . . . . . . . . . . . . . . . . . .  17
84204  . . . . . . . . . . . . . . . . . . . . . . . .  18
84239  . . . . . . . . . . . . . . . . . . . . . . . .  50
84376  . . . . . . . . . . . . . . . . . . . . . . . .  51
84428-1  . . . . . . . . . . . . . . . . . . . . . .  12
84428-2  . . . . . . . . . . . . . . . . . . . . . .  12
84428-3  . . . . . . . . . . . . . . . . . . . . . .  12
84428-4  . . . . . . . . . . . . . . . . . . . . . .  12
84428-5  . . . . . . . . . . . . . . . . . . . . . .  12
84428-6  . . . . . . . . . . . . . . . . . . . . . .  12
84428-10  . . . . . . . . . . . . . . . . . . . . .  12
84428-15  . . . . . . . . . . . . . . . . . . . . .  12
84429-1  . . . . . . . . . . . . . . . . . . . . . .  13
84429-2  . . . . . . . . . . . . . . . . . . . . . .  13
84429-3  . . . . . . . . . . . . . . . . . . . . . .  13
84429-4  . . . . . . . . . . . . . . . . . . . . . .  13
84501  . . . . . . . . . . . . . . . . . .  32, 37, 52
84511  . . . . . . . . . . . . . . . . . . . . . . . .  52
84528  . . . . . . . . . . . . . . . . . . . . . . . .  50
84616  . . . . . . . . . . . . . . . . . . . . .  40, 46
84629  . . . . . . . . . . . . . . . . . . . . . . . .  49
84776  . . . . . . . . . . . . . . . . . . . . . . . .  10
84944  . . . . . . . . . . . . . . . . . . . . .  46, 49
84960  . . . . . . . . . . . . . . . . . . . . .  46, 49
84961  . . . . . . . . . . . . . . . . . . . . . . . .  46
84962  . . . . . . . . . . . . . . . . . . . . . . . .  46
84990  . . . . . . . . . . . . . . . . . . . . .  40, 46
85208  . . . . . . . . . . . . . . . . . . . . . . . .  54
85209  . . . . . . . . . . . . . . . . . .  34, 38, 54
85215  . . . . . . . . . . . . . . . . . . . . . . . .  34
85217  . . . . . . . . . . . . . . . . . . . . . . . .  38
85218  . . . . . . . . . . . . . . . . . . . . . . . .  34
85220  . . . . . . . . . . . . . . . . . . . . . . . .  20
85351-1  . . . . . . . . . . . . . . . . . . . . . .  16
85351-2  . . . . . . . . . . . . . . . . . . . . . .  16

58

Model No.

Page No.

85351-3  . . . . . . . . . . . . . . . . . . . . . .  16
85351-4  . . . . . . . . . . . . . . . . . . . . . .  16
85351-5  . . . . . . . . . . . . . . . . . . . . . .  16
85351-6  . . . . . . . . . . . . . . . . . . . . . .  16
85352-1  . . . . . . . . . . . . . . . . . . . . . .  16
85352-2  . . . . . . . . . . . . . . . . . . . . . .  16
85352-3  . . . . . . . . . . . . . . . . . . . . . .  16
85352-4  . . . . . . . . . . . . . . . . . . . . . .  16
85352-5  . . . . . . . . . . . . . . . . . . . . . .  16
85352-6  . . . . . . . . . . . . . . . . . . . . . .  16
85353-1  . . . . . . . . . . . . . . . . . . . . . .  16
85353-2  . . . . . . . . . . . . . . . . . . . . . .  16
85353-3  . . . . . . . . . . . . . . . . . . . . . .  16
85353-4  . . . . . . . . . . . . . . . . . . . . . .  16
85391  . . . . . . . . . . . . . . . . . . . . . . . .  37
85414 . . . . . . . . . . . . . . . . . . . . . . . . . 23
85418  . . . . . . . . . . . . . . . . . . . . . . . .  47
85419  . . . . . . . . . . . . . . . . . . . . . . . .  47
85423 . . . . . . . . . . . . . . . . . . . . . . . . . 47
85424 . . . . . . . . . . . . . . . . . . . . . . . . . 23
85425 . . . . . . . . . . . . . . . . . . . . . . . . . 23
85427 . . . . . . . . . . . . . . . . . . . . . . . . . 47
85423-5001  . . . . . . . . . . . . . . . . . . .  47
85423-6501  . . . . . . . . . . . . . . . . . . .  47
85423-6502  . . . . . . . . . . . . . . . . . . .  47
85423-8001  . . . . . . . . . . . . . . . . . . .  47
85423-8002  . . . . . . . . . . . . . . . . . . .  47
85423-9501  . . . . . . . . . . . . . . . . . . .  47
85423-9502  . . . . . . . . . . . . . . . . . . .  47
85423-11001  . . . . . . . . . . . . . . . . . .  47
85423-11003  . . . . . . . . . . . . . . . . . .  47
85423-11004  . . . . . . . . . . . . . . . . . .  47
85423-650067  . . . . . . . . . . . . . . . . .  47
85423-800067  . . . . . . . . . . . . . . . . .  47
85423-950080  . . . . . . . . . . . . . . . . .  47
85423-1100067  . . . . . . . . . . . . . . . .  47
85423-1100080  . . . . . . . . . . . . . . . .  47
85427-5001  . . . . . . . . . . . . . . . . . . .  47
85427-6501  . . . . . . . . . . . . . . . . . . .  47
85427-6502  . . . . . . . . . . . . . . . . . . .  47
85427-8001  . . . . . . . . . . . . . . . . . . .  47
85427-8002  . . . . . . . . . . . . . . . . . . .  47
85427-9501  . . . . . . . . . . . . . . . . . . .  47
85427-9502  . . . . . . . . . . . . . . . . . . .  47
85427-650067  . . . . . . . . . . . . . . . . .  47
85427-800067  . . . . . . . . . . . . . . . . .  47
85427-1100067  . . . . . . . . . . . . . . . .  47
85429 . . . . . . . . . . . . . . . . . . . . . . . . . 23
85430  . . . . . . . . . . . . . . . . . . . . .  36, 49
85431  . . . . . . . . . . . . . . . . . . . . .  36, 49
85432  . . . . . . . . . . . . . . . . . . . . . . . .  36
85433  . . . . . . . . . . . . . . . . . . . . . . . .  36
85434  . . . . . . . . . . . . . . . . . . . . .  31, 49

Centro-Matic® Automatic Lubrication Systems
Numerical Index
Model No.

Page No.

85435  . . . . . . . . . . . . . . . . . . . . .  31, 49
85436  . . . . . . . . . . . . . . . . . . . . .  31, 49
85437  . . . . . . . . . . . . . . . . . . . . . . . .  49
85438  . . . . . . . . . . . . . . . . . . . . . . . .  36
85440  . . . . . . . . . . . . . . . . . . . . .  36, 49
85441  . . . . . . . . . . . . . . . . . . . . .  36, 49
85442  . . . . . . . . . . . . . . . . . . . . . . . .  31
85444  . . . . . . . . . . . . . . . . . . . . .  31, 49
85445  . . . . . . . . . . . . . . . . . . . . .  31, 49
85446 . . . . . . . . . . . . . . . . . . . . . . . . . 24
85460  . . . . . . . . . . . . . . . . . . . . . . . .  39
85471  . . . . . . . . . . . . . . . . . . . . . . . .  20
85472  . . . . . . . . . . . . . . . . . . . . . . . .  20
85473  . . . . . . . . . . . . . . . . . . . . . . . .  20
85474  . . . . . . . . . . . . . . . . . .  43, 44, 45
85475  . . . . . . . . . . . . . . . . . .  43, 44, 45
85479 . . . . . . . . . . . . . . . . . . . . . . . . . 42
85480  . . . . . . . . . . . . . . . . . . . . . . . .  20
85481  . . . . . . . . . . . . . . . . . . . . .  20, 49
85482  . . . . . . . . . . . . . . . . . . . . . . . .  20
85483  . . . . . . . . . . . . . . . . . . . . .  20, 49
85484 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85487  . . . . . . . . . . . . . . . . . . . . . . . .  20
85489  . . . . . . . . . . . . . . . . . . . . . . . .  49
85490  . . . . . . . . . . . . . . . . . . . . . . . .  49
85492  . . . . . . . . . . . . . . .  40, 43, 44, 45
85497  . . . . . . . . . . . . . . . . . . . . . . . .  11
85518 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85520  . . . . . . . . . . . . . . . . . .  35, 38, 53
85525  . . . . . . . . . . . . . . . . . . . . . . . .  53
85530  . . . . . . . . . . . . . . . . . . . . . . . .  54
85535  . . . . . . . . . . . . . . . . . . . . . . . .  53
85552 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85553 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85554 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85566 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85569 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85585  . . . . . . . . . . . . . . . . . . . . . . . .  20
85587 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85591 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85592 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85598 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85599 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85660  . . . . . . . . . . . . . . . . . . . . .  44, 45
85661  . . . . . . . . . . . . . . . . . . . . .  44, 45
85662  . . . . . . . . . . . . . . . . . . . . . . . .  44
85663  . . . . . . . . . . . . . . . . . . . . . . . .  44
85664 . . . . . . . . . . . . . . . . . . . . . . . . . 43
85665 . . . . . . . . . . . . . . . . . . . . . . . . . 43
85676  . . . . . . . . . . . . . . . . . . . . .  20, 40
85677  . . . . . . . . . . . . . . . . . . . . . . . .  20
85678  . . . . . . . . . . . . . . . . . . . . .  20, 40
85706 . . . . . . . . . . . . . . . . . . . . . . . . . 22

Model No.

Page No.

85722 . . . . . . . . . . . . . . . . . . . . . . 20, 41
85723 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85724 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85725 . . . . . . . . . . . . . . . . . . . . . . 20, 41
85726 . . . . . . . . . . . . . . . . . . . . . . 20, 41
85727 . . . . . . . . . . . . . . . . . . . . . . 20, 41
85728 . . . . . . . . . . . . . . . . . . . 20, 41, 43
85729 . . . . . . . . . . . . . . . . . . . . . . 20, 43
85730 . . . . . . . . . . . . . . . . . . . . . . 20, 43
85731 . . . . . . . . . . . . . . . . . . . . . . 20, 40
85732 . . . . . . . . . . . . . . . . . . . . . . 20, 40
85733 . . . . . . . . . . . . . . . . . . . . . . 20, 40
85734 . . . . . . . . . . . . . . . . . . . . . . 20, 40
85735 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85736 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85737 . . . . . . . . . . . . . . . . . . . . . . 20, 42
85738 . . . . . . . . . . . . . . . . . . . . . . 20, 42
85739 . . . . . . . . . . . . . . . . . . . . . . 20, 42
85740 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85741 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85742 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85743 . . . . . . . . . . . . . . . . . . . . . . 20, 44
85744 . . . . . . . . . . . . . . . . . . . . . . 20, 44
85745 . . . . . . . . . . . . . . . . . . . . . . 20, 45
85746 . . . . . . . . . . . . . . . . . . . . . . 20, 45
85747 . . . . . . . . . . . . . . . . . . . . . . 20, 42
85748 . . . . . . . . . . . . . . . . . . . . . . 20, 42
85749 . . . . . . . . . . . . . . . . . . . . . . 20, 42
85750 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85751 . . . . . . . . . . . . . . . . . . . . . . 20, 44
85752 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85753 . . . . . . . . . . . . . . . . . . . . . . 20, 44
85754 . . . . . . . . . . . . . . . . . . . . . . 20, 42
85762 . . . . . . . . . . . . . . . . . . . . . . . . . 22
85763 . . . . . . . . . . . . . . . . . . . . . . . . . 22
85770-1  . . . . . . . . . . . . . . . . . . . . . . .  8
85770-2  . . . . . . . . . . . . . . . . . . . . . . .  8
85770-3  . . . . . . . . . . . . . . . . . . . . . . .  8
85770-4  . . . . . . . . . . . . . . . . . . . . . . .  8
85770-5  . . . . . . . . . . . . . . . . . . . . . . .  8
85770-6  . . . . . . . . . . . . . . . . . . . . . . .  8
85771  . . . . . . . . . . . . . . . . . . . . . . . . .  8
85772  . . . . . . . . . . . . . . . . . . . . . . . . .  8
85780-1  . . . . . . . . . . . . . . . . . . . . . . .  9
85780-2  . . . . . . . . . . . . . . . . . . . . . . .  9
85780-3  . . . . . . . . . . . . . . . . . . . . . . .  9
85780-4  . . . . . . . . . . . . . . . . . . . . . . .  9
85780-5  . . . . . . . . . . . . . . . . . . . . . . .  9
85780-6  . . . . . . . . . . . . . . . . . . . . . . .  9
85781  . . . . . . . . . . . . . . . . . . . . . . . . .  9
85782  . . . . . . . . . . . . . . . . . . . . . . . . .  9
85785-1  . . . . . . . . . . . . . . . . . . . . . . .  9
85785-2  . . . . . . . . . . . . . . . . . . . . . . .  9

59

Model No.

Page No.

85785-3  . . . . . . . . . . . . . . . . . . . . . . .  9
85785-4  . . . . . . . . . . . . . . . . . . . . . . .  9
85785-5  . . . . . . . . . . . . . . . . . . . . . . .  9
85785-6  . . . . . . . . . . . . . . . . . . . . . . .  9
85785-7  . . . . . . . . . . . . . . . . . . . . . . .  9
85785-8  . . . . . . . . . . . . . . . . . . . . . . .  9
85785-9  . . . . . . . . . . . . . . . . . . . . . . .  9
85785-10  . . . . . . . . . . . . . . . . . . . . . .  9
85850 . . . . . . . . . . . . . . . . . . . . . . . . . 20
85851 . . . . . . . . . . . . . . . . . . . . . . . . . 20
86258  . . . . . . . . . . . . . . . . . . . . . . . .  20
87228 . . . . . . . . . . . . . . . . . . . . . . . . . 49
87240 . . . . . . . . . . . . . . . . . . . . . . . . . 49
87417  . . . . . . . . . . . . . . . . . . . . . . . .  51
87418  . . . . . . . . . . . . . . . . . . . . . . . .  51
87419  . . . . . . . . . . . . . . . . . . . . . . . .  51
90537  . . . . . . . . . . . . . . . . . . . . . . . .  17
92544  . . . . . . . . . . . . . . . . . . . . . . . .  49
92597  . . . . . . . . . . . . . . . . . . . . .  39, 49
94553H  . . . . . . . . . . . . . . . . . . . . . . .  44
102781  . . . . . . . . . . . . . . . . . . . . . . .  17
201849 . . . . . . . . . . . . . . . . . . . . . . . . 35
239351  . . . . . . . . . . . . . . . . . . . . . . .  10
239352  . . . . . . . . . . . . . . . . . . . . . . .  10
239353  . . . . . . . . . . . . . . . . . . . . . . .  10
239354  . . . . . . . . . . . . . . . . . . . . . . .  10
239355  . . . . . . . . . . . . . . . . . . . . . . .  10
244270  . . . . . . . . . . . . . . . . . . . . . . .  46
244727  . . . . . . . . . . . . . . . . . . . . . . .  55
247333  . . . . . . . . . . . . . . . . . . . . . . .  55
249281  . . . . . . . . . . . . . . . . . . . .  17, 18
249282  . . . . . . . . . . . . . . . . . . . .  17, 18
249605  . . . . . . . . . . . . . . . . . . . .  46, 55
249608  . . . . . . . . . . . . . . . . . . . . . . .  49
252725  . . . . . . . . . . . . . . . . . . . . . . .  49
252790  . . . . . . . . . . . . . . . . . . . . . . .  47
252792  . . . . . . . . . . . . . . . . . . . . . . .  47
252831  . . . . . . . . . . . . . . . . . . . . . . .  47
254120  . . . . . . . . . . . . . . . . . . . . . . .  48
254815  . . . . . . . . . . . . . . . . . . . . . . .  48
256228  . . . . . . . . . . . . . . . . . . . . . . .  48
256241  . . . . . . . . . . . . . . . . . . . . . . .  48
270781  . . . . . . . . . . . . . . . . . . . . . . .  51
270782  . . . . . . . . . . . . . . . . . . . . . . .  51
270982  . . . . . . . . . . . . . .  40, 43, 44, 45
271579  . . . . . . . . . . . . . . . . . . . . . . .  47
271605  . . . . . . . . . . . . . . . . . . . . . . .  40
271606  . . . . . . . . . . . . . . . . . . . . . . .  40
271924 . . . . . . . . . . . . . . . . . . . . . . . . 23
271925 . . . . . . . . . . . . . . . . . . . . . . . . 23
271926 . . . . . . . . . . . . . . . . . . . . . . . . 23
271927 . . . . . . . . . . . . . . . . . . . . . . . . 23
272180  . . . . . . . . . . . . . . . . .  43, 44, 45

Centro-Matic® Automatic Lubrication Systems
Numerical Index
Model No.

Page No.

272285  . . . . . . . . . . . . . . . . . . . . . . .  48
273088  . . . . . . . . . . . . . . . . . . . . . . .  17
273089  . . . . . . . . . . . . . . . . . . . . . . .  17
274312 . . . . . . . . . . . . . . . . . . . . . . . . 22
274398  . . . . . . . . . . . . . . . . . . . . . . .  55
274524 . . . . . . . . . . . . . . . . . . . . . . . . 22
274824 . . . . . . . . . . . . . . . . . . . . . . . . 17
274872 . . . . . . . . . . . . . . . . . . . . . 22, 44
274873 . . . . . . . . . . . . . . . . . . . . . 20, 44
274874 . . . . . . . . . . . . . . . . . . . . . . . . 20
274878 . . . . . . . . . . . . . . . . . . . . . . . . 44
274886 . . . . . . . . . . . . . . . . . . . . . . . . 44
274887 . . . . . . . . . . . . . . . . . . . . . . . . 44
274888 . . . . . . . . . . . . . . . . . . . . . . . . 44
274899 . . . . . . . . . . . . . . . . . . . . . . . . 43
274934 . . . . . . . . . . . . . . . . . . . . . . . . 44
275878 . . . . . . . . . . . . . . . . . . . . . . . . 44
276041 . . . . . . . . . . . . . . . . . . . . . 20, 44
276325 . . . . . . . . . . . . . . . . . . . . . . . . 43

Model No.

Page No.

276358 . . . . . . . . . . . . . . . . . . . . . . . . 44
276359 . . . . . . . . . . . . . . . . . . . . . . . . 44
276360 . . . . . . . . . . . . . . . . . . . . . . . . 20
276366 . . . . . . . . . . . . . . . . . . . . . . . . 44
276492 . . . . . . . . . . . . . . . . . . . . . . . . 49
276492A  . . . . . . . . . . . . . . . . . . . . . .  49
276764 . . . . . . . . . . . . . . . . . . . . . . . . 25
276765 . . . . . . . . . . . . . . . . . . . . . . . . 25
276849 . . . . . . . . . . . . . . . . . . . . . . . . 22
276903 . . . . . . . . . . . . . . . . . . . . . . . . 43
276919 . . . . . . . . . . . . . . . . . . . . . . . . 43
277560 . . . . . . . . . . . . . . . . . . . . . . . . 20
277654 . . . . . . . . . . . . . . . . . . . . . . . . 22
277659 . . . . . . . . . . . . . . . . . . . . . . . . 22
277703 . . . . . . . . . . . . . . . . . . . . . . . . 22
278092 . . . . . . . . . . . . . . . . . . . . . . . . 22
278094 . . . . . . . . . . . . . . . . . . . . . . . . 22
278095 . . . . . . . . . . . . . . . . . . . . . . . . 22
278096 . . . . . . . . . . . . . . . . . . . . . . . . 22

60

Model No.

Page No.

278097 . . . . . . . . . . . . . . . . . . . . . . . . 22
280414 . . . . . . . . . . . . . . . . . . . . . . . . 22
280441 . . . . . . . . . . . . . . . . . . . . . . . . 22
280442 . . . . . . . . . . . . . . . . . . . . . . . . 22
280450 . . . . . . . . . . . . . . . . . . . . . . . . 22
280455 . . . . . . . . . . . . . . . . . . . . . . . . 22
282007 . . . . . . . . . . . . . . . . . . . . . . . . 49
282008 . . . . . . . . . . . . . . . . . . . . . . . . 49
282288  . . . . . . . . . . . . . . . . . . . .  34, 49
283005  . . . . . . . . . . . . . . . . . . . . . . .  22
283167  . . . . . . . . . . . . . . . . . . . .  38, 49
350241  . . . . . . . . . . . . . . . . . . . . . . .  55
350242  . . . . . . . . . . . . . . . . . . . . . . .  55
350244  . . . . . . . . . . . . . . . . .  32, 37, 55
350245  . . . . . . . . . . . . . . . . . . . . . . .  55
350282  . . . . . . . . . . . . . . . . . . . . . . .  55
350283  . . . . . . . . . . . . . . . . . . . . . . .  55
645006  . . . . . . . . . . .  30, 32, 33, 35, 50

A complete line of lubrication solutions
and industrial pumping products
Automatic lubrication
Our automatic systems dispense
measured amounts of lubricant at
predetermined intervals. Systems include
Helios® and Duo-Matic™ two-line
systems, and Centro-Matic®, Modular
Lube®, Quicklub® and ORSCO precision
oil lubrication. With our BearingSaver®
program, we find the best automatic
solution for you from our wide range of
systems for grease, fluid grease and oil.

General lubrication
Sometimes a simple approach is the best
solution. Our wide range of products
includes smaller, self-contained automatic lubricators and general lubrication
equipment.

Industrial pumping
Lincoln has developed specialized pumps
and pumping stations to handle the
difficult job of transferring thick fluids.
®
From the industry-best PileDriver III
®
and PowerMaster III pumps and air
motors to specialty pumps, controls
and mounting accessories, Lincoln is
the preferred pumping system for many
tough applications.

® SKF is a registered trademark of the SKF Group.
® Lincoln, Centro-Matic and FlowMaster are registered trademarks of Lincoln Industrial Corp.
© Deutsch is a copyright of the Deutsch Group.
© SKF Group 2013
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can
be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.
December 2013 · FORM 442832

skf.com



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2013:12:23 08:08:39-07:00
Creator                         : Adobe InDesign CS4 (6.0.6)
Modify Date                     : 2017:07:21 07:58:24-06:00
Trapped                         : False
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:07:21 07:58:24-06:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Format                          : application/pdf
Document ID                     : uuid:5ab8fb73-77c0-f04a-a8f6-1355a622c22f
Instance ID                     : uuid:4def9d4e-a75d-a648-bd97-0b25558ad1e0
Producer                        : Adobe PDF Library 9.0
Page Count                      : 64
EXIF Metadata provided by EXIF.tools

Navigation menu