Lesman It's On Fire Combustion Instrumentation Catalog B1048 Cat2008

User Manual: B1048

Open the PDF directly: View PDF .
Page Count: 32

Lesman Chronicle

VOLUME BCS-2008 • LESMAN INSTRUMENT COMPANY

With our partners at

Honeywell, Maxon, Fireye, and

Kromschroder, we can provide

you a one-stop source for all

your combustion needs.

IT’S ON FIRE!

...Are you willing to risk

worker safety for the

chance to keep your

boiler, furnace, thermal

oxidizer, or process

heater running?

WHY GAMBLE?WHY GAMBLE?

ame safeguard control

products let you maximize

process availability under

safe operating conditions.

On-Site Training

Lecture and hands-on sessions

taught by our factory-trained

product specialist.

Classes customized

to focus on your

speciﬁc interests.

More on

page 3!

Take a look inside: From burners and controls, ﬂame detectors, and ampliﬁers to valves

and switches for pressure and temperature, Lesman has the products and the factory-

trained staff to help you get the right ﬁt for a ﬁnely-tuned combustion system.

Need portable monitors for combustion efﬁciency? We’ve got those, too!

Seeing

Dollar

$ign$?

For more, check out

Honeywell’s ControLinks™

linkageless fuel air ratio

control system on page 10.

In this day and age, who’s

NOT concerned about

saving time, energy and

money? But where do you

start? How about with

reduced fuel costs? Or

reduced downtime?

Did you know...

• Mechanicallinkagesdon’t

always provide precise fuel-

air ratio control.

• Youcouldbespending

10% to 30% more on fuel

than necessary.

• Youcanreduceserviceand

downtime by replacing

your mechanical cam and

linkage systems.

Coming Soon!

Flame Safeguard and Burner Control Systems Catalog

1. Manual shutoff cock

2. Gas pressure regulator

3. Low pressure interlock

4. Motorized gas valve manual reset

5. Control valve operator

6. High gas pressure interlock

7. Test cock

8. Pilot gas cock

9. Pilot pressure regulator

10. Pilot solenoid valve

11. Gas pilot burner assembly

12. Solid-state ignition transformer

13. Flame detector

14. Primary control relay mounting base

15. High limit safety shutdown

16. Thermocouple leadwire

17. Thermocouple sensor

18. Burner valve controller

19. Main gas valve operator (automatic)

20. Vent valve (normally open)

Typical Single Burner Furnace

with Flame Safeguard System

See

What’s Inside? Page

Actuators

Honeywell Modutrol IV Low-Torque Rotary Actuator Motors .......................... 13

Honeywell V4055 On-Off Gas Valve Actuator ......................................................... 14

Kromschroder IC20/IC40 Valve Actuators ................................................................ 19

Burner Control Systems

Fireye BurnerLogix Integrated Burner Management System ........................... 19

Fireye Flame Monitor Burner Control System ........................................................ 20

Fireye MicroM Flame Safeguard Burner Control System .................................... 18

Fireye MB Industrial Multiburner Flame Safeguard System .............................. 21

Honeywell 7800 Series Microprocessor-Based Burner Controls ...................4–5

Honeywell ControLinks™ Linkageless Fuel Air Ratio Controls ..................10–11

Honeywell RA890 Protectorelay® Electromechanical Primary Control ........ 12

Kromschroder Flame Relays and Burner Control Modules.........................22–23

Maxon SMARTFIRE® Intelligent Combustion Control System .......................... 15

Flame Detectors and Ampliﬁer Modules

Fireye Flame Scanners .................................................................................................... 20

Fireye 65UV5 Integrated Flame Scanner with Internal Flame Relay .............. 21

Honeywell R78 Series Flame Signal Ampliﬁers .........................................................6

Honeywell Flame Detectors........................................................................................8–9

Kromschroder UVS8T Ultraviolet Flame Detector ................................................ 23

Industrial Burners

Maxon Industrial Burners........................................................................................16–17

See

What’s Inside? Page

Pressure Controls

Honeywell P7810C Pressuretrol® Line Voltage Pressure Controller ............... 11

Honeywell C6097 Safety Limit Switches .................................................................. 12

Honeywell L404F Pressuretrol® Operating Controls ........................................... 12

Kromschroder DG Pressure Switches for Gas Applications ............................... 24

Valves

ASCO Safety Shutoff Solenoid Valves for Combustion Systems ...................... 27

Honeywell V5055 Gas Safety Shutoff Valves ........................................................... 14

Honeywell V51E Firing Rate Gas Valves .................................................................... 14

Kromschroder BV Butterﬂy Valves .............................................................................. 25

Kromschroder Valvario® VAS Safety Shutoff Solenoid Valves ........................... 26

Maxon Control Valves and Safety Shutoff Valves .................................................. 15

Combustion Monitors and Gas Detectors

COSA Zircomat In-Situ Stack Gas Oxygen Analyzer ............................................. 28

Testo Combustion Analyzers from RAECO Rents! ................................................. 29

TSI CA-Calc 6213 Combustion Analyzer from RAECO Rents! ............................ 29

Portable Combustible Gas Detectors from RAECO Rents! ..........................30–31

Burner Control Accessories

Fireye MicroM Subbase Mounting Adapters .......................................................... 18

Honeywell 7800 Series Burner Control Plug-In Modules .................................6–7

Honeywell Q7800 Wiring Subbases ..............................................................................5

Due to contractual agreements with our manufacturers, some items in this

catalog may not be available in all geographic areas or markets. Prices are

current as of publication date, and are subject to change without notice.

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

IT’S ON FIRE

CATALOG 2008

Meet Dan...

Dan Weise, Lesman product spe-

cialist, instructs our customers on

process instrumentation theory,

hardware and software.

Dan’s recent courses have in-

cluded Honeywell UDC controllers,

Trendview and X-Series paperless

recorders, and Siemens SIMATIC

PDM HART software. Other course

curricula include basics of instru-

mentation (temperature, pressure, level, and ﬂow) and

basics of Modbus protocol.

Dan has been involved in all facets of data acquisition and

process instrumentation, from sales and commissioning to

service and product support since 1978. He’s a long-time

member of ISA, and has been with Lesman since 1988.

In his words, Dan is the guy “who reads all the manuals

nobody else reads.” In our customers’ words, he’s the trainer

to call if you want to “cut to the SO WHAT of instrumenta-

tion,” so it’s easy to understand.

Call 800-953-7626 to schedule

your Lesman U combustion training!

Combustion Systems Training

At Lesman, our goal is to make sure you get the right product, understand how it

works, make sure it’s installed properly, and get the most out of it. To help you

with that, we’ve created a set of classes to teach you what you need to know

about combustion systems, burner controls, and ﬂame safety.

Courses are done in a lecture style with question/answer periods. Where

necessary, they include some hands on examples. Classes can be held at your plant

or in a Lesman Training Center, and can be customized to meet your needs. Here’s

a sample of what you can expect from our Lesman U course on combustion.

p Lesson 1: When is Flame Safety Required?

• Types of applications

• Basics of ame detection

• Introduction to basic burner systems and terminology

• Main functions of ame safety controls

• A fully implemented burner system

p Lesson 2: Burner Controls

• Four categories: Flame switches, primary controls, programmers,

microprocessor control systems

• Functions of ame safety systems: System checks, burner system sequencing,

supervisory functions and shutdown

p Lesson 3: Advanced Flame Safety Control Programmers

• System components

• System functions and applications

p Lesson 4: Advanced Flame Safety Concepts

• Valve proving systems

• Linkageless control systems (Honeywell ControLinks™)

• Energy savings with pulse ring

p Lesson 5: Gas Trains and Valves

Expanded Combustion Product Lines to Serve You Better!

Dear Friends,

As you can see in this catalog, we’ve expanded our product offering to include combustion solutions.

With all that you hear about “going green”, we thought it would be helpful to bring you products that

can help improve burner efﬁciency and reduce energy costs. It doesn’t matter if you have a thermal

oxidizer, boiler, process heater, kiln or furnace, we’ve got products to help improve your burner efﬁciency

and use less natural gas or heating oil. No matter how big or how small the burner, we’ve got your solu-

tion for energy savings.

If it’s safety your interested in, we have ﬂame safety controls to help you meet all of your insurance

requirements and keep your workers safe. Lighting burners with ﬂares isn’t safe, and neither is running a

process without the controls that ensure proper startup and shutdown sequences.

If you no longer have “the folks that know ﬂame safety” on staff, give us a call. Our specialists will make sure that your upgrades

meet all codes and keep your people safe. Don’t let something as simple as ﬂame safety controls jeopardize your people or

shut down your process.

Need to focus on reducing “greenhouse” gases? We’ve teamed up with vendors that have solutions to reduce NOx and other

environmental pollutants. Through innovative burners and sensors, we’ve got you covered. And with our ownership in RAECO,

we can even help measure and document stack gas emissions to help you comply with EPA rules.

We even have the expertise to help you implement ﬂame safety or burner control systems. So, if you’d like to do some upgrades

to save energy costs, but don’t have either the time or expertise, just give us a call and let us know. Our partners have years of

experience and can minimize downtime, maximize your uptime, and do it safely and professionally.

You shouldn’t keep walking by your old controls that need replacing. There’s no need for an unplanned furnace or boiler

“relocation” that can happen because your old controls simply don’t work. Being safe is best for you and your people, so give us

a call and we’ll help you start upgrading.

Sincerely,

Mike DeLacluyse

Watch our website for even

more helpful tips and product

information on ame safety

and burner control products.

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

BURNER

CONTROLS

Microprocessor-Based Burner Controls

Microprocessor-based integrated primary burner control for automatically ﬁred

gas, oil, coal, or combination fuel single burner applications.

• Five LEDs for sequence information

• Closed loop logic test, expanded safe-start check, internal hardware status monitoring and tamper-resistant

timing and logic

• Valve proving feature tests valve seat integrity to detect a leak greater than 0.1% of burner input capacity

• Selectable recycle/lockout on loss of ame

• UL, CSA, FM, FCC approved

Required components: Q7800 universal wiring subbase, R78 series ﬂame signal ampli-

ﬁer, S7800A1142 keyboard display module (shown) for advanced diagnostics and to

set up valve proving

RM7840 Programming Control Unit for Forced-Air Burners

Flame Establishing Period Catalog

Pilot Main Interlocks Number Price

4 or 10 seconds 10, 15, or 30 seconds, or intermittent Running and low-ﬁre (LHL-LF) RM7840G1022 $1805.30

4 or 10 seconds 10 or 15 seconds Lockout, low-ﬁre and high-ﬁre (LHL-LF&HF) RM7840L1075 2150.57

Programming control with valve proving for automatically ﬁred gas-, oil-, coal-, or combination

fuel single-burner applications.

• Interrupted pilot type

• Airow check feature

• Valve proving feature tests valve seat integrity to detect a leak greater than 0.1% of burner input capacity

• Five LEDs provide sequence information. Power LED blinks fault code on Lockout.

• CSA, FM, and UL approved

Required components: Q7800 universal wiring subbase, R78 series ﬂame signal ampliﬁer,

ST7800A plug-in purge timer cards, S7800A1142 keyboard display module for advanced

diagnostics, and to set up valve proving

Model Selection Guide

RM7890 On-Off Primary Control Unit for Forced-Air Burners

Model RM7840 RM7890 RM7895 RM7898

Control Type Programming On-O Primary On-O Primary On-O Primary

Added

Function

Selectable Pre-Purge Timing,

Air Flow Check

Units Available with Valve

Proving (VPS)

Selectable Pre-Purge Timing Selectable Pre-Purge Timing,

Shutter Drive, Programmable

Post-Purge, Valve Proving

Required

Components

Q7800 Wiring Subbase

R78 Flame Signal Amplier

ST7800 Purge Timer Card

S7800A1142 Keyboard Display

(for VPS)

Q7800 Wiring Subbase

R78 Flame Signal Amplier

S7800A1142 Keyboard Display

(for VPS)

Q7800 Wiring Subbase

R78 Flame Signal Amplier

ST7800 Purge Timer Card

Q7800 Wiring Subbase

R78 Flame Signal Amplier

ST7800 Plug-In Purge Timer

Card, S7800A1142 Keyboard

Display (for VPS)

Choosing the Right Honeywell 7800 Series Burner Control

Flame Establishing Period Pilot Catalog

Pilot Main Type Special Features Number Price

4 or 10 seconds Intermittent Intermittent RM7890A1015 $482.49

4 or 10 seconds Intermittent Intermittent Shutter Drive Capability RM7890B1014 506.27

4 or 10 seconds Intermittent Intermittent Valve Proving (VPS) Check Feature, Blinking LED Fault Annunciation RM7890A1056 435.25

4 or 10 seconds Intermittent Intermittent Shutter Drive Capability, VPS Check, Blinking LED Fault Annunciation RM7890B1048 432.90

Model Selection Guide

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

Select either the panel-mount

or burner-mount version of the

Z7800A,B 22-terminal universal

wiring subbase to accommodate your 7800 series relay

module. Both are fully compatible with all relay mod-

ules, to let you specify a wiring termination approach

that meets your application requirements.

Microprocessor-based integrated primary burner control for automatically

ﬁred gas, oil, or combination fuel single burner applications.

• On/off primary control with prepurge

• Five LEDs for sequence information

• Airow switch check

• Selectable relight or lockout on loss of ame

• Optional local or remote annunciation of operation and fault information, remote reset capability

Required components: Q7800 universal wiring subbase, R78 series ﬂame signal

ampliﬁer, ST7800 plug-in purge timer card

RM7895 On-Off Primary Control Unit for Forced-Air Burners

Flame Establishing Period Pilot Delayed Catalog

Pilot Main Type Airﬂow Check Main Valve Interlocks Number Price

4 or 10 seconds Intermittent Intermittent No No Selectable RM7895A1014 $643.51

4 or 10 seconds Intermittent Intermittent Dynamic No Selectable RM7895B1013 643.51

4 or 10 seconds 10 Seconds Interrupted Dynamic Yes Selectable RM7895D1011 832.29

Model Selection Guide

Microprocessor-based integrated primary burner control for automatically

ﬁred gas, oil, or combination fuel single burner applications.

• On/off primary control

• Programmable post purge and valve proving feature available through keyboard display module

• Five LEDs for sequence information, power LED blinks fault code on safety shutdown

• Airow switch check and shutter drive output

• Selectable recycle or lockout on loss of airow or ame

• Local or remote annunciation of operation and fault information

Required components: Q7800 universal wiring subbase, R78 series ﬂame signal

ampliﬁer, ST7800 plug-in purge timer card, S7800A1142 keyboard display module

RM7898 On-Off Primary Control Unit with Valve Proving

Flame Establishing Period Pilot Catalog

Pilot Main Type Special Features Number Price

4 or 10 seconds Intermittent or Selectable Shutter drive output, programmable post purge, valve proving RM7898A1000 $569.44

10 seconds

Model Selection Guide

Q7800A or B Wiring Subbases for RM7800 Burner Controls

Model Selection Guide

Catalog

Description Number Price

22 Terminal Universal Wiring Subbase

Panel Mount Q7800A1005 $36.56

Burner/Wall Mount Q7800B1003 36.56

Learn more about Honeywell burner controls and ame safeguard products

online at www.lesman.com

Download specication datasheets, installation instructions, wiring diagrams and

more. Most products available to buy through our secure online store.

BURNER

CONTROLS

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

• Flame signal strength 0.0 to 5.0 VDC

• Test jacks measure amplier signal voltage

• Dynamic Ampli-Check™ or Self-Check rectication available, with safety shut-

down on ampliﬁer or system failure

• UL, CSA, FM approved

Solid-state ﬂame signal ampliﬁers detect the presence of ﬂame

in response to a signal from a rectifying, ultraviolet, or infrared ﬂame detector.

Dynamic Ampli-Check™ circuitry tests ﬂame ampliﬁer during burner operation; 7800 series

relay module locks out on safety shutdown with ampliﬁer failure.

Dynamic Self-Check Rectiﬁcation Ampli ﬁer and Dynamic Self-Check Ultraviolet Ampliﬁer

test electronic components in the ﬂame detection system 10 to 12 times per minute. The 7800

series relay module locks out on safety shutdown with ﬂame detection system failure.

R7849A ﬂame detectors should be used only on burners that cycle on and off at least once

every 24 hours. Appliances with burners that remain on for 24 hours or longer should use ultra-

violet ﬂame detection systems (C7012E/F detector and R7847C ampliﬁer or C7076A detector

and R7886A ampliﬁer).

R78 Series Flame Signal Ampliﬁer Modules

Purge timers let you purge unburned fuels from the combustion chamber. The

plug-in cards install easily into the 7800 series relay module. They are available

in 15 timing ranges from 2 seconds to 30 minutes.

• Compatible with selected 7800 series relay modules.

• CSA, FM approved, UL recognized

ST7800A Plug-In Purge Timer Cards

Model Selection Guide

* Leadwire runs greater than 50 ft.

Color Flame Failure Self- Catalog

Code Type Response Time Checking Compatible Flame Sensors Number Price

Rectiﬁcation-Type Flame Ampliﬁers, Green

Green Rectiﬁcation 3.0 Seconds Dynamic C7024E, F Flame Detector R7824C1002 $605.36

Green Rectiﬁcation 0.8 or 1.0 Second Standard Gas: Rectifying Flame Rods C7004/7005/7007/7008/7009, Q179 R7847A1025 241.51

Green Rectiﬁcation 2.0 or 3.0 Second Standard Gas: Rectifying Flame Rods C7004/7005/7007/7008/7009, Q179; R7847A1033 241.51

Gas, Oil and Coal: Ultraviolet Flame Sensors C7012A, C

Green Rectiﬁcation 0.8 or 1.0 Second Standard Gas: Rectifying Flame Rods C7004/7005/7007/7008/7009, Q179* R7847A1074 241.51

Green Rectiﬁcation 2.0 or 3.0 Second Standard Gas: Rectifying Flame Rods C7004/7005/7007/7008/7009, Q179* R7847A1082 241.51

Gas, Oil, and Coal: Ultraviolet Flame Sensors C012A, C

Green Rectiﬁcation 0.8 or 1.0 Second Ampli-Check Gas: Rectifying Flame Rods C7004/7005/7007/7008/7009, Q179 R7847B1023 693.71

Green Rectiﬁcation 2.0 or 3.0 Second Ampli-Check Gas: Rectifying Flame Rods C7004/7005/7007/7008/7009, Q179 R7847B1031 693.71

Gas, Oil, and Coal: Ultraviolet Flame Sensors C7012A, C

Green Rectiﬁcation 0.8 or 1.0 Second Ampli-Check Gas: Rectifying Flame Rods C7004/7005/7007/7008/7009, Q179* R7847B1064 693.71

Green Rectiﬁcation 2.0 or 3.0 Second Dynamic Gas, Oil, and Coal: Ultraviolet Flame Sensors C7012E, F R7847C1005 548.49

Infrared-Type Flame Signal Ampliﬁer, Red

Red Infrared 2.0 or 3.0 Second Standard Gas, Oil, and Coal: Infrared Lead Sulﬁde Flame Sensors C7015 R7848A1008 453.29

Red Infrared 2.0 or 3.0 Second Ampli-Check Gas, Oil, and Coal: Infrared Lead Sulﬁde Flame Sensors C7015 R7848B1006 483.97

Ultraviolet-Type Flame Signal Ampliﬁer, Purple

Purple UV 0.8 or 1.0 Second Standard Gas, Oil: Minipeeper C7027A, C7035A, C7044 R7849A1015 241.51

Purple UV 2.0 or 3.0 Second Standard Gas, Oil: Minipeeper C7027A, C7035A, C7044 R7849A1023 241.51

Purple UV 0.8 or 1.0 Second Ampli-Check Gas, Oil: Minipeeper C7027A, C7035A, C7044 R7849B1013 377.08

Purple UV 2.0 or 3.0 Second Ampli-Check Gas, Oil: Minipeeper C7027A, C7035A, C7044 R7849B1021 377.08

Ultraviolet-Type Flame Signal Ampliﬁer, Purple

Purple UV 2.0 or 3.0 Second Dynamic Gas, Oil, and Coal: Ultraviolet Flame Sensor C7061 R7861A1026 635.99

Purple UV 0.8 or 1.0 Second Dynamic Gas, Oil, and Coal: Ultraviolet Flame Sensor C7061 R7861A1034 635.99

FLAME

SAFEGUARD

Catalog

Description Number Price

2-Second Pre-Purge ST7800A1005 $67.88

7-Second Pre-Purge ST7800A1013 67.88

10-Second Pre-Purge ST7800A1021 67.88

Catalog

Description Number Price

30-Second Pre-Purge ST7800A1039 $67.88

60-Second Pre-Purge ST7800A1054 67.88

1.5-Minute Pre-Purge ST7800A1062 67.88

Catalog

Description Number Price

2.5-Minute Pre-Purge ST7800A1070 $67.88

4-Minute Pre-Purge ST7800A1088 67.88

6-Minute Pre-Purge ST7800A1096 67.88

Model Selection Guide

Don’t see the timer card

you need? Call Lesman.

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

FLAME

SAFEGUARD

S7800A1142 Universal Keyboard Display Module

Provides current status of burner sequence, timing, hold, and lockout information plus

selective or preemptive messages. Required for programming Valve Proving and Post

Purge features on 7800 series relay modules.

• First-out annunciation and system diagnostics provided in 2-row by

20-column display

• Provides burner control data, remote reset, and report generation

• Local or remote operation, fault information

• UL listed, CSA certied, FM approved, and FCC

rated

S7810A1009

Data ControlBus Module

Lets you connect a remote reset switch,

a remote keyboard display module, or

communicate to a personal computer.

• Installs directly on front of 7800 relay modules

• Communications interface, remote reset

• Use with remote mounted keyboard display

S7820A1007

Remote Reset Module

Links a remote reset switch (push-button) that

allows the 7800 series burner control to be reset

from a remote location.

• Installs directly on front of 7800 relay module

• Allows reset of 7800 series relay module by a remote reset

push-button up to 1000 feet away

S7830A1005 First-Out Expanded Annunciator Panel

Monitors the status of a series string of limit, control, and interlock contacts. It enhances fault

and status messages of the 7800 series burner control.

• 26 LEDs — 22 LEDs to annunciate limits and interlocks, 4 LEDs to annunciate

power, current status, ﬁrst-out status, and system lockout

• Enhances keyboard display module sequence hold

and lockout messages

• Connects to 7800 series relay module via RS485

• UL listed, CSA, FM approved

Model Selection Guide

Catalog

Description Number Price

Universal Keyboard Display S7800A1142 $485.61

Model Selection Guide

Catalog

Description Number Price

First-Out Expanded Annunciator S7830A1005 $935.07

Connector for Keyboard Display 203541 45.30

Burner Control Plug-In Accessory Modules

Catalog

Description Number Price

Remote Mounting of Keyboard Display Module S7810A1009 $206.64

PC Interface, and Remote Reset Function

Model Selection Guide

Catalog

Description Number Price

Remote Module for Resetting 7800 Series S7820A1007 $228.75

Relay Module

Model Selection Guide

Hey Lesman... Where’s My Stuff?

Want to know when your Lesman order will arrive? Use the Order

Status checker, right on the Lesman.com homepage!

• Enter your PO number and 5-digit zip code,

and click the “Check Status” button.

We’ll show your order details and a clickable

tracking link at UPS or FedEx. If the order

hasn’t shipped, it’ll give you the expected

ship date.

Buy your Honeywell

burner controls and

ame safeguard products

at Lesman.com for an

instant 15% savings!

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

FLAME

DETECTORS

C7008, C7009

Rectiﬁcation Flame Rods

Kantal A-1 ﬂame rod with sparkplug-type rod holder,

threaded base, and snap-on cover.

100% fail-safe ame detection. For use with gas-red systems and

intermittent pilots only. Use with Honeywell ﬂame safeguard controls

that require rectiﬁcation-type ﬂame detectors. Can be used with or

without cover and cut to desired length. Includes ﬂame rod holder

and Rajah electrical connector.

Approvals: UL, CSA, FM.

Model

C7008,

C7009

Q340A

C7012

Purple Peeper®

C7027

Minipeeper®

C7035

Minipeeper®

C7061

Purple Peeper®

C7076

Detector

Type

Flame Rod Thermocouple Rectication

Ultraviolet

Ultraviolet Ultraviolet Ultraviolet Ultraviolet

Burner

Type

Gas-Fired Gas-Fired Coal, Gas, or Oil-

Fired

Coal, Gas, or Oil-

Fired

Coal, Gas, or Oil-

Fired

Gas or Oil-Fired Gas or Oil-Fired

Pilot

Type

Intermittent or

Standing

Intermittent or

Standing

Intermittent or

Interrupted

Intermittent or

Interrupted

Intermittent or

Interrupted

Intermittent or

Interrupted

Intermittent or

Interrupted

Unique

Feature

100% Fail-Safe

Operation

Low Cost Units

for Process

Applications

Dynamic

Self-Check,

Shutter

1/2” Sight Pipe

Mount

1” Sight Pipe

Mount

Dynamic

Self-Check

Dynamic

Self-Check,

Adjustable

Sensitivity

Flame

Ampli-

er

R7247A,B,

R7847A, B,

R7257, R7289

Typically

Connected

via UDC

R7247C, R7847C,

R7747C

R7249A,B,

R7849A, B,

R7749B, R7259,

R7290

R7249A,B

R7849A,B

R7749B, R7259,

R7290

R7861 R7476A1015,

R7886A1001

Flame Detectors

Model Selection Guide

Flame Rod Holder Dimensions Electrical Catalog

Length Length Diameter Connection Number Price

12” 3-3/4” 7/8” 1/4” NPT Male C7008A1174 $166.01

24” 3-3/4” 7/8” 1/4” NPT Male C7008A1182 246.46

4” 2-3/8” 3/8” 1/8” NPT Male C7009A1009 103.84

12” 2-3/8” 3/8” 1/8” NPT Male C7009A1025 135.98

Q340 Thermocouples for Gas-Fired Pilot Flame Detection

Premium long-life, durable 30mv thermocouples generate a thermoelectric current that

senses a pilot ﬂame on gas-ﬁred heating systems.

For easy installation, the Q340A comes with a push-in clip, split nut, and an adapter assembly, plus a 11/32 male

connector nut for Pilotstat® safety control power units.

Output: Normal: 26 to 32 mV; Lowest Acceptable: 18 mV; Turndown: 2 mV

Temperature Rating: 1400°F at hot junction, 780°F at cold junction

Replacement for: Robertshaw 1980, T45, T46, White Rogers HO series, Penn-Baso K15, K16,

K19, 88D, ITT-General 2500 and 2600 series, and Jade TK5

Catalog

Lead Length Number Price

36” (914mm) Q340A1090 10.72

48” (1219mm) Q340A1108 11.92

Model Selection Guide

C7076 UV Detector with Adjustable Sensitivity

Dual adjustable sensitivity with 400:1 dynamic range, for

use with intermittent or interrupted pilots on gas- or oil-ﬁred

burners. Compatible with R7476A and R7886A dynamic self-

check UV ﬂame ampliﬁers. Closed-loop self-checking circuit

ensures integrity of both ampliﬁer and ﬂame detector.

Visit www.lesman.com

for popular models.

Buy online through our

secure online store!

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

C7027 Minipeeper® Ultraviolet Flame Detectors

Compact UV ﬂame detectors for use on coal-, gas-, oil-ﬁred or combination burners. Can be

used with either intermittent or interrupted pilots. Compatible with R7248A/B, R7849A/B,

R7749B, R7259, and R7290 solid-state UV ﬂame ampliﬁers on Honeywell RM7800 series relay

modules and controls.

Compact size allows for blast-tube mounting. Seals

against pressures up to 5 psi when correctly installed.

Wire in parallel for difﬁcult sighting applications.

Mounting: 1/2” sight pipe with integral collar or 1/2”

NPT threaded spud connector.

Dimensions: 1-1/8” diameter (with mounting nut),

3-7/8” length, 8-foot lead.

Electrical Connections: Two NEC Class 1 leadwires

Approvals: UL, CSA, FM.

C7012 Purple Peeper® Solid-State UV Flame Detectors

Solid-state UV ﬂame detector with dynamic self-check, for coal-, gas-, or oil-ﬁred burners. Can

be used with intermittent or interrupted pilots. Compatible with R7247C, R7847C, and R7747C

UV ﬂame ampliﬁers on Honeywell RM7800 series relay modules.

Mounts horizontally, vertically, or at any angle in between.

Provides quick electrical hookup with threaded conduit ﬁtting

and color-coded leadwires. Reduces nuisance shutdowns by

wiring two in parallel.

Mounting: Mounting ﬂange with NPT internal threads for

attaching to sight pipe

Approvals: UL, CSA, FM.

C7035

129464M

Ambient Sight Pipe Catalog

Temp. Range Mounting Number Price

-40° to 215°F Integral nut C7027A1031 $166.75

-40° to 215°F Integral nut* C7027A1072 166.75

0° to 215°F Integral nut C7027A1023 150.41

0° to 215°F Integral nut* C7027A1049 150.41

0° to 215°F Integral nut** C7027A1080 186.95

Model Selection Guide

* 1/2” NPT threaded spud connector

** Includes 136733 heat block and 390427B bushing

FLAME

DETECTORS

Model Selection Guide

Catalog

Description Number Price

Dynamic Self-Checking Ultraviolet Detector

120 VAC, 3/4” NPT C7012E1104 $3161.29

120 VAC, 1” NPT C7012E1112 3161.29

C7035 Minipeeper® Ultraviolet Flame Detectors

Compact ultraviolet ﬂame detectors with ﬁeld-replaceable UV sensing tubes. For use on coal-,

gas-, oil-ﬁred or combination burners. Can be used with either intermittent or interrupted

pilots. Compatible with R7248A/B, R7849A/B, R7749B, R7259, and R7290 solid-state UV ﬂame

ampliﬁers on Honeywell RM7800 series relay modules and controls.

Shield protects sensing tube. Seals against pressures up to 5 psi when correctly installed. Can be wired in

parallel for difﬁcult sighting applications.

Mounting: 1” sight pipe with integral collar

Dimensions: 1-1/2” diam. (with collar), 4-1/8”

length, 72” leads

Approvals: UL, CSA, FM.

Catalog

Description Number Price

0° to 215°F temperature range, 6’ lead C7035A1023 $330.90

Replacement UV sensing tube for C7035 129464M 301.68

Model Selection Guide

129464N

C7061 Purple Peeper® Solid-State UV Flame Detectors

Ultraviolet ﬂame detector with dynamic self-check for gas-, or oil-ﬁred burners. Can be used

with intermittent or interrupted pilots. Compatible with R7861

dynamic self-check UV ﬂame ampliﬁers on Honeywell RM7800

series relay modules.

Mounts horizontally, vertically, or at any angle in between.

Reduces nuisance shutdowns by wiring two in parallel. Field-

replaceable UV sensing tube and quartz viewing window.

Mounting: Mounting ﬂange with 3/4” NPT internal threads

Dimensions: 5-1/4” diam. (with ﬂange), 7-7/32” long, 96” leads

Approvals: UL, CSA, FM.

Model Selection Guide

Catalog

Description Number Price

120 VAC, 3/4” NPT C7061A1012 $1377.66

120 VAC, 3/4” NPT* C7061A1038 1398.48

UV Sensing Tube 129464N 335.68

* With Brad Harrison 41310 connector

Available soon! UV/IR ame detectors from

IRIS Systems. Call Lesman for details.

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

FUEL AIR RATIO

CONTROL

ControLinks™ Fuel Air Ratio Control System

• Stand-alone parallel positioning control system

designed for easy retroﬁt

• Dynamic safety checks: failsafe potentiometer

check, anti-swap of actuators, and curve veriﬁca-

tion algorithms, relay test for limit control input/

output (LCI-LCO) contact set

• Integrated shock protection algorithms: Water or

stack temperature low ﬁre hold, ﬂue gas recircula-

tion (FGR) hold, FGR and low-ﬁre hold

• Controller LEDs: Power, alarm, motor 1, 2, 3, 4 for

status, and fault code annunciation (60 possible)

• Two independent fuel proles with or without FGR

• Programmable positioning for non-selected fuel

actuator, standby, purge, light-off, or minimum/

maximum modulation

• Up to four universal parallel positioning actuators:

Combustion air, fuel 1, fuel 2, FGR/ﬂexible usage

• Fourth channel actuator exible usage: FR, second-

ary air control, secondary modulating fuel valve

• Auto/manual ring rate input

• Seven to 24 points per prole curve with quick

setup feature, providing minimum three-point

proﬁle curve

• Actuator CW/CCW switches for manually driving

hub —useful for installation and service

• Actuator LED annunciation for uncongured, con-

ﬁgured, on-line, or faulty actuator states

Honeywell ControLinks™ replaces the traditional single point modulation of a

mechanical cam-and-linkage assembly that controls the relationship between fuel,

airﬂow, and ﬂue gas recirculation on a power burner. The linkageless fuel air ratio

control provides more accuracy and efﬁciency in actuator positioning and burner

ﬁring, reducing your service requirements and downtime. It can be installed as part of

a retrot or a new burner application —anywhere increased efciency is desired.

Up to four independently controlled universal parallel positioning actuators

(UPPAs) are managed by the ControLinks controller, which responds to load and

ﬁring rate demands.

ControLinks can be used on single or combination fuel single burner applications,

including power burners, boilers, process furnaces, ovens, smelting, kilns, paint drying

booths, VOC burn-off, ceramics, make-up air heaters, or any full modulating burner.

Honeywell ControLinks™ fuel air ratio control system helps you realize energy savings, increased turndown, reduced

emissions, and system reliability in an easy-to-install, powerful, and cost-effective package.

Features

R7999A ControLinks™ Fuel Air Controller

Uses the latest microprocessor technology to simultaneously control up to four actuators.

Use with ML7999 actuators to replace mechanical cam-and-linkage assembly controlling

the relationship between fuel, airﬂow, and ﬂue gas recirculation (FGR) on a power burner.

Fast burner setup vial PC or laptop. Two independent fuel proﬁles with or without FGR. Programmable

behaviors of all actuators during purge and standby. Programmable behavior of non-selected fuel actuator.

Independent light off and minimum modulation positions. Auto/manual input and manual mode ﬁring-rate

input. Multipurpose communications port.

ZM7999A ControLinks™ conﬁguration software tool lets you create burner modulation curves (proﬁles)

for your burners, for safe and efﬁcient operation at all points along the curve. Wizards step you through the

commissioning process. Save ﬁles on your PC to use over again.

Complete System Requires: R7999 controller, Q7999 wiring subbase, ML7999 positioning actuator,

and ZM7999 conﬁguration software.

Model Selection Guide

Catalog

Description Number Price

Fuel air ratio controller, 100-120 VAC, 50/60 Hz R7999A1005 $774.90

Field wiring terminal subbase for R7999A controller. Panel mount, NEMA 1 enclosure Q7999A1006 98.53

ControLinks™ Windows-based conﬁguration software for R7999A controllers ZM7999A1006 365.93

Typical boiler application with Honeywell ControLinks™

fuel ratio control system installed.

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

FUEL AIR RATIO

CONTROL

ML7999 Universal Parallel-Positioning Actuators

ControLinks™ actuators control the position of primary and secondary fuel valves,

combustion air damper, and ﬂue gas return dampers. UL, CSA, CE approved.

Vibration: 0.0 to 0.5g continuous

Environmental Conditions: Ambient Temperature: -40° to 140°F; Operating Tem-

perature: -40° to 150°F; Operating Humidity: 5% to 95% RH, non-condensing

Model Selection Guide

Catalog

Actuator Description and Function Number Price

Pulse-width modulating control of combustion air dampers, butterﬂy gas valves, oil ML7999A2001 $272.80

modulation valves, and ﬂue gas recirculation systems. Includes precise feedback

potentiometer and integral power supply. Parallel-positioning actuator.

Provides 4-20 mA control input to control combustion air dampers and modulation ML7999B1002 540.84

valves. Includes precision drive shaft control and integral power supply capable of

direct line voltage connection. Direct coupled actuator.

Call for adapter assemblies for

connecting to shaft sizes other

than 1/2”.

S7999B ControLinks™ Conﬁguration Display

Monitor up to 99 burner systems connected via Modbus. Each burner control,

fuel/air ratio control, expanded annunciator or other Modbus devices present

on the burner system can be viewed individually to determine its status.

Display: Color 3.5” x 4.6” touchscreen interface with screen saver, contrast and volume controls

Communications: Two RS485 Modbus ports for monitoring up to 99 unique controls

Function: Allows setup and monitoring of R7999 ControLinks controller, programmable

expanded annunciator terminal remaining, and R7999 EEPROM backup and restore

Model Selection Guide

Catalog

Description Number Price

Touchscreen display for ControLinks™ system. 12 VDC input power S7999B1000 $1193.07

Model Selection Guide

Catalog

Description Number Price

ML7999 actuator shaft adapter for and 3/8” round or square valve shaft 201391 $3.23

ML7999 actuator weatherprooﬁng kit (1 corner stop, 2 gaskets) 32002935-001 18.56

ML7999 actuator 3/4” shaft adapter assembly 32003168-001 44.22

ML7999 actuator 5/8” shaft adapter assembly 32003168-002 50.07

ML7999 actuator 9/16 shaft adapter assembly 32003168-003 50.07

V51E mounting plate for 1.5” and 2” valves 32003396-001 43.48

V51E mounting plate for 2.5” 3”, and 4” valves 32003396-002 47.34

R7999 3-pin electrical connector 32002515-001 9.53

ControLinks™

Accessories

Looking for a

portable combustion

analyzer?

See page 29.

Handhelds available

for sale or rent!

Learn more online at

www.lesman.com!

P7810C Pressuretrol® Controller

Line voltage pressure controller that eliminates the need for a controller and transmitter.

One unit does on/off control, high limit and 4-20 mA modulation.

Accuracy: ±4.0% full scale output over operating temperature (32° to 140°F)

Model Selection Guide

Catalog

Description Number Price

Solid State Pressuretrol® Controller with On/Off Control, Limit Control, 0–15 PSI P7810C1000 $524.81

and 4-20 mA Modulation. FM, CSA, UL Approvals. 0–150 PSI P7810C1018 583.72

LED Indicators for Power, Call for Heat Function, and Lockout Status 0–300 PSI P7810C1026 651.85

Siphon Loop with 1/4” NPT Threads for P7810C 209731A 32.61

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

Mechanical Burner Controls and Safety Switches

BURNER

CONTROLS

C6097 Safety Limit Switches

Limit switches for positive or differential pressure systems to sense natural gas, liquid

propane gas, or air. Removable clear protects scaleplate and adjusting knob.

Temperature Range: -40° to 140°F

Switch Ratings: 3.0 AFL, 18.0 ALR, 5.0 Amp resistive. Can be wired to turn on alarms.

Model Selection Guide

Operating Pressure Differential at Switch Catalog

Range Min. Setpoint Max. Setpoint Operation Mounting Number Price

Diaphragm-Actuated Safety Limit Switch, Brake on Pressure Fall, 1/8” NPT Internal Threaded Connection

0.4” to 5” WC 0.6” WC 0.25” WC Manual Reset 1/4” NPT C6097A1095 $117.40

3” to 21” WC — — Auto Recycle 1/4” NPT C6097A1053 96.26

Diaphragm-Actuated Safety Limit Switch, Break on Pressure Rise, 1/8” NPT Internal Threaded Connection

12” to 60 “ WC 10” WC 12” WC Manual Reset 1/4” NPT C6097B1002 124.96

1.5 to 7 PSI 1.1” WC 1.4” WC Manual Reset 1/4” NPT C6097B1051 136.22

L404F Pressuretrol® Controllers

Operating control with automatic limit protection for pressure systems. Use with steam, air,

noncombustible gases, or ﬂuids non-corrosive to pressure sensing element

Switching Action: SPDT snap-action switch to open or close a circuit on pressure rise

Connections: Pipe (main or high pressure): 1/4” NPT internal thread; Electrical: Screw terminals

Model Selection Guide

Operating Sustained Adjustable Sensor Unit Catalog

Range Pressure Differential Element Includes Number Price

2 to 15 PSI 25 PSI max. 2 to 6 PSI Stainless Steel Diaphragm Siphon Loop L404F1060 $172.29

5 to 50 PSI 85 PSI max. 6 to 14 PSI Stainless Steel Diaphragm Ground Screw L404F1375 175.01

10 to 150 PSI 225 PSI max. 10 to 22 PSI Stainless Steel Diaphragm — L404F1102 192.05

Use with ﬂame rods, rectifying photocells and C7012A,C Purple

Peeper ultraviolet ﬂame detectors. Recycles once after failure to re-

establish pilot. No start if failure occurs in ﬂame detector circuit.

Power Rating: 50 Hz: 8.5w, 17VA max.; 60 Hz: 7w, 13 VA max.

Ambient Temperature: -20º to 105°F

Approvals: CSA, FM, UL

Model Selection Guide

Safety Switch Flame Failure Catalog Price

Description Timing Response* Number Each

Rectiﬁcation-Type 15 Seconds 3.0 Seconds RA890F1288 $1385.97

Ultraviolet-Type 15 Seconds 3.0 Seconds RA890G1260 1385.94

Q270A Protectorelay® Mounting Subbase Q270A1024 116.04

Compatible ﬂame detectors on pages 8–9.

S8610U3009 Intermittent Pilot Ignition Control

Provides ignition sequence, ﬂame monitoring, and safety shutoff for intermittent pilot

ignition systems used on natural or LP gas-ﬁred furnaces, boilers, and heating applications.

Electrical Rating: 24 V, 60 Hz; Current Draw: 1A

pilot valve, 2A main valve; Contact Rating: 0.2A

Field Replacement: For most Honeywell,

Robertshaw, Johnson, UTEC (HCS)

intermittent pilot ignition modules

Model Selection Guide

Catalog

Description Number Price

Intermittent pilot control. 15- or

90-sec trial for ignition, 0- or S8610U3009 $164.37

30-sec conﬁgurable pre-purge

RA890 Protectorelay®

Electromechanical Primary Control

Non-programming primary control provides ﬂame safeguard

protection for industrial and commercial single or dual fuel

burners. With SPDT alarm contacts.

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

Modutrol IV

Low torque, light duty, rotary action Modutrol IV motor is designed for accurate positioning

of dampers and valves in industrial ovens, furnaces, and process heaters.

Torque Rating: 25 to 300 Lb-In

Timing: 15 to 240 seconds

Stroke: Fixed or adjustable, 90° and 160° dual on some models

Limit Switches: Two end-of-travel limit switches standard

Approvals: CSA, UL

More models available online. Visit www.lesman.com/get/modutrol.php for series

speciﬁcations, model selection, and part number cross references.

Model Selection Guide

ACTUATOR

CONTROLS

Low-Torque Rotary Actuator Motors

* Field-addable auxiliary switches

Stroke Timing Torque Auxiliary Functional Replacement Catalog

90° 160° Rating Switches Product Includes for These Obsolete Models Number Price

Proportional-Reversing Motors, 135 Ohm Input Signal, 90° to 160° Field-Adjustable Stroke (Unless otherwise speciﬁed)

15 sec 30 sec 75 Lb-in 0 M9184D1005 $806.09

15 sec 30 sec 75 Lb-in 1 Tapped Shaft M9484D1002, D1036, and E1116 M9484E1009 965.43

30 sec 60 sec 35 Lb-in 0 Adjustable Zero/ Span, Transformer M8161A1024 and A1032, M9164A1005 682.92

M9161A1008, M9164A1021 and A1054

30 sec 60 sec 35 Lb-in 0* M9164A1120, A1062, A1047, and A1096 M9164D1009 608.10

30 sec 60 sec 60 Lb-in 0* 24 VAC, Spring Return M7285A1052, M7282A1006, M9185D1004 905.25

M9175D1014, D1006, and D1014

30 sec 60 sec 60 Lb-in 1 M9185E1019 1013.40

30 sec 60 sec 150 Lb-in 0 M9484D1028, D1044, and D1051 M9484D1010 822.55

30 sec 60 sec 150 Lb-in 0* M9184A1012, A1035, B1009, B1017, B1025, M9184D1021 836.50

M9184D1013, D1047, and D4009

30 sec 60 sec 150 Lb-in 1 M9484E1090 and E4003 M9484E1017 965.43

30 sec 60 sec 150 Lb-in 1 Motor Crank Arm, M9484E1025, E1041, E1058, E1066, M9484E1033 954.42

Ships in 90° Position M9484E1074, and E1082

30 sec 60 sec 150 Lb-in 2 Ships in 90° Position M9484F1007 1014.01

30 sec 60 sec 150 Lb-in 2 Tapped Shaft, Ships in 90° Position M9484F1031 1024.93

30 sec 60 sec 150 Lb-in 2 M9184F1000 and F1018 M9184F1034 1008.54

30 sec — 35 Lb-in 2 M9184C1031 1008.54

— 60 sec 60 Lb-in 2 24 VAC, Spring Return M9185C1006 1094.20

— 60 sec 150 Lb-in 0 M9181A1012, M9184A1001 M9184A1019 806.09

Proportional-Reversing Motors, 120 VAC Power, Modulating 4-20 mA Input, Adjustable Zero and Span. Transformer and Screw Terminal Adapter Included

15 sec 30 sec 75 Lb-in 0 M7284A1038 984.96

30 sec 60 sec 150 Lb-in 0 M281A1007, M7284A1046 M7284A1004 940.89

30 sec 60 sec 150 Lb-in 0 M7284A1020 M7284A1012 940.89

30 sec 60 sec 150 Lb-in 2 M7284C1018, M7284C1026 M7284C1000 1103.17

30 sec 60 sec 150 Lb-in 2 M7284Q1017 M7284Q1009 1103.17

60 sec 120 sec 300 Lb-in 2 M7294Q1007 1106.72

Motors with Switched SPDT or Floating Output, 120 VAC Power, SPDT Input, 3-Wire, Line Voltage, or Position Proportional Controller

— 30 sec 75 Lb-in 0 M6184A1023 606.46

30 sec — 150 Lb-in 0 M6284A1014, A1002, A1048, A1071, and 1063 M6284A1055 733.15

Motors with Switched SPDT or Floating Output, 24 VAC Power, 3-Wire, SPDT or Voltage Input

15 sec 30 sec 75 Lb-in 0 Low Voltage M6184D1001 554.23

30 sec 60 sec 150 Lb-in 0* Low Voltage M6181A1018, D1004, F1009, F1017, M6184D1035 544.29

M6161A1004, M6184A1007 and B1021

30 sec 60 sec 150 Lb-in 2 Line Voltage M6184F1014 714.91

Stroke Stroke Torque Auxiliary Functional Replacement Catalog

Timing (Deg) Rating Switches Product Includes for These Obsolete Models Number Price

Two-Position Spring Return Motors, SPST, 2-Wire, Voltage Inputs

30 sec 75° 20 Lb-in 1 120 VAC Power M436A1041 A1082, A1090, A1165, and A1181 M436A1116 $350.76

60 sec 160° 60 Lb-in 0 120 VAC Power M4185A1001 554.32

60 sec 160° 60 Lb-in 1 120 VAC Power M4182B1002 M4185B1009 587.40

30 sec 90° 60 Lb-in 1 120/208/240 VAC M4185B1017 M4185B1058 610.07

20 sec 45° 30 Oz-In 0 M847A1072 123.66

30/60 90/160 60 Lb-in 0* 24 VAC M8185B1000 and B1034 (w/ 220736A) M8185D1006 456.87

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

Use with Honeywell V5055 gas valves where smooth light off is important to control gas

supply to industrial burners.

One second maximum closing time. Con-

tinuous display of valve position with a red

(open) or yellow (closed) indicator. Provides

ﬁnal safety shutoff service when used with

V5055 valves.

Temperature Range: -40° to 150°F

Operating Pressure: 5 psi maximum

Electrical Rating: 120 VAC, 60 Hz

Auxiliary Switch Contact Ratings: 9.8 AFL,

55.8 ALR, 1/2 hp;

Proof of Closure Switch Contact Ratings

(V4055D): 4.9 AFL, 29.4 ALR, 1/2 hp; 9.8 AFL,

58.8 ALR, 1/2 hp

V4055 On-Off Gas Valve Actuator

Model Selection Guide

Timing Internal Damper Catalog

(Open) Auxiliary Switch Shaft Number Price

On-Off Actuator, Use with V5055/V5097A,B Valve Bodies

13 sec Yes (90° Stroke) No V4055A1296 $559.16

13 sec No Yes V4055A1098 499.13

13 sec No No V4055A1031 499.13

26 sec No Yes V4055A1064 462.11

26 sec No No V4055A1007 462.11

26 sec No No V4055A1312* 976.96

On-Off Actuator with Proof of Closure Switch, Use with V5055C/

V5097C Valve Bodies

13 sec Yes No V4055D1035 600.71

13 sec No Yes V4055D1019 540.65

13 sec No No V4055D1043 540.65

26 sec No Yes V4055D1001 505.95

* NEMA 4 Enclosure

VALVES AND

ACTUATORS

V5055 Industrial Gas Safety Shutoff Valve

V51E Butterﬂy Firing Rate Gas Valve

Valves and Actuators

Provides modulating control of natural, manufactured, LP gases or air.

Use in commercial and industrial instal-

lations where large amounts of gas must

be closely controlled. Do not use as a safety

shutoff valve. Use with mod motor and

Q100 linkage. Includes strain release.

Temperature Range: 32° to 140°F

Pressure: Rating: 5 psi max.; Inlet/outlet

pressure tapping: Two downstream 1/4”

NPT taps

Material: Aluminum body

Approvals: UL

Model Selection Guide

Pipe Catalog

Size Capacity Number Price

1.5” 4200 cf/Hr – 118.9 m3/Hr V51E1000 $396.95

2” 9210 cf/Hr – 260.7 m3/Hr V51E1018 448.72

2.5” 8390 cf/Hr – 199.8 m3/Hr V51E1034 474.85

3” 14640 cf/Hr – 414.5 m3/Hr V51E1059 500.35

Bracket for 2” valve/Modutrol motor 127413 169.18

Bracket for 2.5” valve/Modutrol motor 127415 203.18

Strain release assembly 49085B 214.28

Stop screws for stop bracket (2 reqd.) 80897BC/0021 2.93

Linkage kit V51 to M941 Modutrol Q100B1006 99.81

Looking for a

mod motor?

See page 13.

Safety shutoff valves used with V4055 ﬂuid power actuators to control natural or LP gas

ﬂow to commercial and industrial burners. Mounts directly in gas supply line.

Temperature Range: -40°F to 150°F

Includes: 1/4”–18 NPT upstream and downstream taps and plugs

Proof of Closure: V5055C valves have double seal and are used with V4055D and V4055E actuators to provide

proof-of-closure switch and valve seal over-travel interlock

Approvals: FM, CSA, and UL

Model Selection Guide

* When used with V4055A or D models. 15 PSI when used with V4055B, E, F, or G models.

Pipe Max Operating Catalog

Size Capacity Differential* Functions Number Price

Safety shutoff valves for use with V4055 valve actuators

1.5” NPT 1717 cf/Hr – 48.6 m3/Hr 5 PSI max On/off safety shutoff V5055A1020 $301.74

2” NPT 3620 cf/Hr – 102.5 m3/Hr 5 PSI max On/off safety shutoff V5055C1000 731.15

with double seal

2.5” NPT 4250 cf/Hr – 120 m3/Hr 5 PSI max On/off safety shutoff V5055C1018 861.65

with double seal

3” NPT 4250 cf/Hr – 148 m3/Hr 5 PSI max On/off safety shutoff V5055A1053 674.84

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

COMBUSTION

CONTROLS

MAXON Combustion Control Systems

• Precise electronic control of air and fuel ow to the burner to maxi-

mize efﬁciency and minimize emissions simultaneously

• Maintains emissions or fuel efciency over the entire operating range

of the burner, not just at one burner setpoint

• Automatically compensates for changes in combustion or process

conditions with full cross-limited ratio control, maximizing burner

performance and ensuring a highly repeatable heat source

• Integrates easily with all burner management systems, reducing

engineering costs in retroﬁt applications

• Advanced diagnostics and troubleshooting provide real-time infor-

mation about combustion and process system performance

• Remote monitoring gateway option reduces process downtime by

providing immediate off-site technical support over a phone line

• Redundant system safety checks built into intelligent components

signiﬁcantly reduces the risks associated with combustion system

commissioning and maintenance neglect

• FM and CSA approved, and meets requirements

of European EMC and low-voltage directives

SMARTFIRE® Intelligent Combustion Control System

Safety Shutoff Valves

• Cast iron, carbon steel, low-temp carbon steel,

and stainless steel bodies with internal trim op-

tions for general purpose or corrosive gases

• Unique bonnet design eliminates packing

adjustments, reducing maintenance and

minimizing drag on closing

• Oxygen compatibility available

• Meet Fluid Control Institute 70-2 control valve

standard for Class VI seat leakage; Full assess-

ment to IEC 61508 as SIL-3 capable

Series 5000 Electromechanical Valves

• Electrically actuated valves

with powerful closing spring,

provides closure in <1 second

for reliable operation

• 3/4” to 6” line sizes, pressures

to 125 psig

• Field-rotatable top assemblies

in 90° increments to ﬁt your application

• Actuators available with manual reset or

automatic reset operators

• Ambient, gas temperatures: -20° to 140°F

• Available normally closed or normally open

• FM, CSA, UL, and CE approved; Available for

non-incendive Class I, Div 2 areas

Series 8000 Air-Actuated Valves

• Pneumatically actuated

valves with powerful

closing spring for reliable

operation

• 3/4” to 6” line sizes, pressures

to 255 psig

• Compact design with inte-

gral solenoid, quick exhaust

and position switches that

protects components, sim-

pliﬁes piping, and minimizes space needs

• Temperature ranges: Ambient: -40° to 140°F;

Gas: -40° to 212°F

• FM, CSA, and CE approved safety shutoff and

vent valves; Available in intrinsically safe and

non-incendive constructions for hazardous

location use

• NACE-compliant trims available

MICRO-RATIO® Flow Control Valves

These assemblies are used for air, gas,

and oil proportioning control. The multiple

screw cam assembly provides mechanical

adjustment capabilities to the air/fuel ratio

at each valve position throughout the entire

capacity range of your burner system.

Throttling range is fully adjustable and

designed to operate over the wide turndown

capabilities of Maxon’s burner systems.

Stand-by fuel requirements are simpliﬁed

by using tandem-linked “air-gas-oil” valves

to provide single point control for multiple

fuel or multiple zone systems.

A complete system using Maxon ﬂow

control valves will typically include a burner,

gas and/or oil pipe trains, mixing equipment,

pressure blower, and a control panel.

Look for more information

on Maxon combustion control

systems, burners, and valve

products online at Lesman.com

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

INDUSTRIAL

BURNERS

Burner Systems for Industrial Applications

Finding the right Maxon burner

for your application

APX®

NP-LE AIRFLO®

CROSSFIRE®

TUBE-O-FLAME®

TUBE-O-THERM®

OVENPAK® LE

M-PAKT®

KINEMAX®

OVENPAK® 400

MEGAFIRE®

KINEDIZER® LE

OPTIMA™ SLS

UNI-RAD®

Heat Treating and Furnace Burners √ √ √

Low Emissions √ √ √ √ √

Make-Up Air (Food or Spray Dryers, Food Processing) √ √

Oven Burners √ √ √ √

Oxidizers √ √

Paper Mill Dryers √ √ √ √ √ √

Pre-Heated Combustion Air √ √ √ √ √

Rotary Dryers and Kilns √√√

Solution Heating and Finishing Systems √ √√√√

Steel Mills √ √ √

APX®

• Nozzle-mixing line burner for use

with low pressure natural gas,

propane and butane

• Single-piece aluminum extrusion

body design eliminates leakage

• Cooler oven walls due to deeper penetration inside the oven (wall-

mount); Independent of variable process air ﬂows (in-duct)

• Corrosion-resistant main gas/air body and durable stainless steel

mixing plates

• Up to 1.0 MMBtu/h per foot; Up to 40:1 turndown

• Packaged units up to 15 foot in length

CROSSFIRE®

• Nozzle-mixing line burner for

use with low pressure natural

gas ﬁring

• Extremely low emissions —

Capable of NOx levels of 25ppm and CO levels of 250ppm at 3% O2

• Temperature uniformity to enhance product quality

• Also available in stainless steel housings or nickel-plated body

• Up to 2.5 MMBtu/h per foot; Up to 25:1 turndown

NP-LE AIRFLO®

• Designed for direct-red make-up

air and process applications

• Improved emissions over Maxon’s

earlier NP AIRFLO units, with signiﬁcantly

lower CO and NO2 levels

• Shorter ame length

• Available in low pressure version and corrosion-resistant materials

• Easily meets ANSI/CSA standards

• Up to 1 MMBtu/h per foot; Up to 30:1 turndown

TUBE-O-FLAME®

• Nozzle-mixing refractory-less burners for

tube ﬁring

• Burns any clean low-pressure fuel gas

• Increases heat transfer efciencies with

long swirling ﬂame pattern

• Flange-mounted compact design

for easy installation

• Low horsepower requirements

reduce initial and operating costs

• Produces low levels of NOx in combustion products

• Generates less noise than open-port tube ring

• Capacities to 5 MMBtu/h; Up to 20:1 turndown

TUBE-O-THERM®

• Burns natural gas, propane, or butane

• Burner-to-tube direct ring system allows

uniform heat transfer, eliminates hot

spots, and produces faster bring-up

times

• Fires directly into small-bore im-

mersion tubes

• Designed with integral low-horse-

power blower to lower costs and

save energy

• Wall- or tube-mount design for no-hassle installation and easy main-

tenance access

• UV ame scanner capability for all four sizes

• Capacities to 5.3 MMBtu/h

Look for more information on Maxon

combustion control systems, burners,

and valve products online at Lesman.com

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

M-PAKT®

• Burns natural gas or propane

• Extremely low emissions — Capable of single-digit

NOx and CO levels at 3% O2

• Flame contained almost entirely inside the dis-

charge sleeve

• Durable steel outer construction

with stainless steel internals

• Compact design with a variety of

control methods

• Up to 8.4 MMBtu/h; Up to 13.5:1 turndown

OVENPAK® LE

• Burns any clean fuel gas, and operates

on low gas supply pressures

• Provides clean combustion with low

NOx and CO levels

• Compact burner design provides

quick and easy installation

• Balanced pressure design and visible

ignition action for easy commissioning,

adjustment and maintenance

• Up to 6.5 MMBtu/h; Up to 100:1 turndown

KINEMAX®

• Burns most clean low-pressure gaseous

fuels or light oil; Can be used with

oxygen-enriched combustion air

• Lower fuel consumption using

preheated combustion air (up to 800°F)

• Operate on-ratio with excess fuel or ex-

cess oil to meet speciﬁc demands of your

combustion process

• Exit velocities up to 275 ft/s to promote workload heat penetration

and better furnace temperature uniformity

• Refractory block for chamber temperatures up to 3000°F

• Removable backplate gives easy access for inspection, maintenance

• Seven sizes, capacities to 8.4 MMBtu/h; Up to 48:1 turndown

KINEDIZER® LE

• Burns natural gas, propane, or

other fuel gases

• Accepts preheated and vitiated

combustion air

• Field-proven low emissions; State-

of-the-art NOx ﬁring, adjustable

for application ﬂexibility

• Rugged design for oxidizers, process heaters, kilns, furnaces, dryers,

waste incineration, and other high-temperature applications

• Excellent stirring and mixing with medium velocity exhaust

• Six sizes, capacities up to 75 MMBtu/h; Up to 22:1 turndown, with the

lowest NOx and excess air in the KINEDIZER® family!

OPTIMA™ SLS

• Fuel exible with natural gas, pro-

pane, and butane capability

• Low NOx and CO production levels

for extremely clean, reliable heat

— and easy air permitting and

environmental compliance

• Large capacity heat releases with a

compact, robust ﬂame geometry

• Intelligent ratio control provides reliable operation and optimal fuel

efﬁciency

• All steel and high temperature alloy construction for reduced weight,

increased durability

• Congurable for dryers, air heaters, ovens, kilns, process heaters, paper

machines, and a variety of industrial heating equipment

• Direct factory operational support with SMARTFIRE® control and

communication gateway

• Five sizes, capacities to 93.5 MMBtu/h; Up to 17.8:1 turndown

UNI-RAD®

• Radiant tube burner for fuel gas inputs

• Suitable for use on pressure tubes,

negative pressure tubes, and electri-

ﬁed radiant tubes

• Flame length adjustable by changing

combustion air-to-ignition ratios —

produces optimum tube temperature uniformity over a wide range

of ﬁring rates and preheated air temperatures

• Continuous plasma spark provides instantaneous ignition, so burner

can operate from the DAT output of a PID control loop

• Can be used in conjunction with UV ame supervision equipment

OVENPAK® 400

• Burns any clean fuel gas; Requires

only low-pressure gas

• Fires into passing air streams

• Provides clean combustion with low NOx

levels

• Simple eld adjustment and maintenance

• Compact burner design provides quick

and easy installation

• More than 90 different styles and sizes

— including cost-effective external blower versions

• Capacities to 16.5 MMBtu/h; Greater than 40:1 turndown

MEGAFIRE®

• Provides clean burning of #2 oil,

natural gas or propane; Fires gas,

oil, or both simultaneously

• Inline blower version includes

energy-efﬁcient centaxial direct

drive combustion air blower

• Quiet operation with exceptionally

low horsepower requirement

• Nine different styles, three different sizes

• Capacities to 45 MMBtu/h; 10:1 turndown on #2 oil, 15:1 turndown

on natural gas

INDUSTRIAL

BURNERS

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

MicroM Flame Safeguard Burner Control System

MicroM Flame Safeguard controls

are compact, modular burn manage-

ment systems designed to provide automatic ignition and continuous

ﬂame monitoring for commercial-sized heating and process burners

ﬁring any type of fuel.

The MicroM incorporates remote reset capability and serial

communications via MODBUS. The optional ED510 display can be

used to access burner hours and cycles, system hours, the last 6

lockouts with burner cycle time stamp and programmer conﬁgu-

ration. MODBUS communications capability allows the integration

of the MicroM control into upper level energy management/data

acquisition systems.

A complete MicroM system consists of the appropriate ﬂame

scanner/detector, plug-in ampliﬁer, and programmer modules con-

nected to a chassis and wiring base. Interchangeable programmer

and ampliﬁer modules allow versatility in selecting control function,

timing, and ﬂame scanning method.

All ampliﬁers are available with ﬂame failure response times of

0.8 or 3 seconds nominal (4 seconds max), and each provide a set

of test jacks with a range of 0-10VDC for the measurement of ﬂame

signal intensity.

Smart LED indicators on all programmer modules indicate the

current operating status of the control, and during a safety lockout,

display the fault as a coded sequence, simplifying troubleshooting

during a shutdown. A run-check switch is provided on the MEP500

series programmers to assist in testing size, position, and stability of

the pilot. A safety checking circuit runs on each start. If ﬂame (real

or simulated) is detected prior to a start or during purge, the fuel

valves will not be energized and the control will lock out.

MicroM Subbase Mounting Adapters

The MicroM can ﬁt directly onto your existing Honeywell Flame Safeguard

mounting subbase with the addition of a single mounting adapter. No need to

do any rewiring or expensive re-engineering for retroﬁts.

Model Selection Guide

Catalog

Description Number Price

MM-2 Mounting Adapter to Retroﬁt to R4795 Systems 60-1765 $96.60

BURNER

CONTROLS

Model Selection Guide

*MicroM chassis model MEC120RC includes all these options.

Catalog Avail-

Component Description Number ability Price

120VAC Input , Standard Board MEC120 • • • • $339.00

Chassis 120 VAC Input with Remote Reset

Capability, Interface to Alphanu-

meric Display, Communications,

Modbus Capability MEC120RC • • • • 493.00

Programmer Relight Operation, 10 Sec. PTFI MEP100 • • • • 151.00

Selectable Purge Timing, PTFI

Timing, Recycle/Non-Recycle,

Post Purge, Prove Air Open at Start MEP230 • • • • 365.00

Selectable Purge Timing to 60 Min. MEP536 • • • • 458.00

Non Self-Checking Scanner, 3 Ft.

Flexible Cable, 1/2” NPT Connector UV1A3 ↓ 160.00

Non Self-Checking Scanner, 6 Ft.

Flexible Cable, 1/2" NPT Connector UV1A6 ↓ 189.00

Flame Infrared Scanner, 8 Ft Shielded

Scanners Cable with 90° Head 48PT2-9003 ↓ 252.00

(See pg 20 Ultraviolet Self-Checking Scanner,

for details) 120 VAC Shutter, 1" NPT Threads 45UV5-1009 ↓ 1373.00

Flame Rod for Gas Flames, 12"

Length, 1/2" NPT Connection 69ND1-1000K4 ↓ 106.00

UV Ampliﬁer, 0.8 Sec Flame Failure

Response Rate (FFRT) MEUV1 • 74.30

UV Amplier, 3 Sec FFRT MEUV4 • 74.30

Infrared Amplier, 0.8 Sec FFRT MEIR1 • 149.00

Amplier Infrared Amplier, 3 Sec FFRT MEIR4 • 149.00

Modules UV Self-Check Amplier, 0.8 Sec FFRT MEUVS1 • 160.00

UV Self-Check Amplier, 3 Sec FFRT MEUVS4 • 160.00

Flame Rod/Photocell Ampliﬁer,

0.8 Sec FFRT MERT1 • 74.30

Flame Rod/Photocell Ampliﬁer,

3 Sec FFRT MERT4 • 74.30

Wiring Closed Wiring Base, Surface Mount 61-3060 • • • • 64.50

Base Open Wiring Base, Cabinet Mount 61-5042 • • • • 68.50

Add functionality to your existing MicroM chassis*.

Standard Local Reset Switch MED1 • • • • 35.10

Standard Local Reset Switch

with Display Output MED2 • • • • 58.30

Standard Local Reset Switch

with Remote Reset MED3 • • • • 81.70

Option Standard Local Reset Switch

Boards with Communications MED7 • • • • 129.00

Standard Local Reset Switch,

Display Output, and Remote Reset MED4 • • • • 117.00

Standard Local Reset Switch with

Display Output, Communications MED5 • • • • 142.00

Standard Local Reset Switch with

Display Output, Remote Reset,

and Communications MED6 • • • • 175.00

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

Model Selection Guide

Catalog

Description Number Price

Step 1: Select Your BurnerLogix Chassis/Ampliﬁer Module

120 VAC 50/60 Hz, with UV non-self-check ampliﬁer YB110UV $1023.00

120 VAC 50/60 Hz, with UV self-check ampliﬁer YB110UVSC 1262.00

120 VAC 50/60 Hz, with IR auto-check ampliﬁer YB110IR 1192.00

120 VAC 50/60 Hz, with ﬂame rectiﬁcation ampliﬁer YB110FR 1017.00

120 VAC 50/60 Hz, with direct-coupled ampliﬁer, for

use with Phoenix and Insight scanners YB110DC 1192.00

Step 2: Select Your BurnerLogix Programmer Module

Keypad-selectable parameters, non-recycle operation,

modulation, open damper proving, 4 second FFRT YP100 905.00

Keypad-selectable parameters, non-recycle operation,

modulation, open damper proving, 2 second FFRT YP102 905.00

Keypad-selectable parameters, non-recycle operation,

ﬁxed TFI times, pilot proving, modulation, open

damper proving, 1 second FFRT YP113 905.00

Keypad-selectable parameters, non-recycle operation,

modulation, open damper proving, indeﬁnite pilot

hold, revert to pilot from auto, 4 second FFRT YP138 905.00

Keypad-selectable parameters, recycle operation,

modulation, 4 second FFRT YP200 699.00

Keypad-selectable parameters, recycle operation,

modulation, 2 second FFRT YP202 699.00

Keypad-selectable parameters, recycle operation, low

ﬁre start, early spark termination, 4 second FFRT YP300 525.00

Keypad-selectable parameters, recycle operation, low

ﬁre start, early spark termination, 4 second FFRT YP302 525.00

Step 3: Add an Optional BurnerLogix Display Module

Vacuum ﬂuorescent display (VFD), Good -40° to 140°F BLV512 520.00

Liquid crystal display (LCD), Good -4° to 140°F BLL510 520.00

NEMA 4 remote mount kit for display, 4 foot cable 129-178-4 56.00

NEMA 4 remote mount kit for display, 8 foot cable 129-178-8 61.00

Step 4: Select a Wiring Base

4” x 5”, 4 foot pigtail wires, color coded and labeled 60-2810-1 93.20

4” x 7” closed base with terminal block and knockouts 60-2812-1 93.20

4” x 7” open base with terminal block 60-2814-1 93.20

Step 5: Add an Optional Expansion Module

Expansion module for ﬁrst-out annunciation YZ300 996.00

Step 6: Select a Flame Scanner (See page 20 for details)

Non Self-Checking Scanner, 3 Ft. Flexible Cable UV1A3 160.00

Non Self-Checking Scanner, 6 Ft. Flexible Cable UV1A6 189.00

Infrared Scanner, 8 Ft Shielded Cable with 90° Head 48PT2-9003 252.00

Ultraviolet Self-Checking Scanner 120 VAC Shutter 45UV5-1009 1373.00

12" Flame Rod for Gas Flames, 1/2" NPT Connection 69ND1-1000K4 106.00

BURNER

CONTROLS

Features

• Keypad-congurable parameters — no dip switches to set!

• Smart LEDs provide status and lockout codes — and provide op-

eration without the need for the optional display

• Alphanumeric display provides clear, concise messaging

• Valve proof-of-closure during standby, startup, and shutdown

• Modbus communications built in — adjustable baud rates allow for

easy adaptation to burner control system

• Open wiring base with terminal block allows testing with control

installed; pigtail wiring base has color-coded and labeled leadwires

• 4-20 mA test jack signal

• New design with smaller footprint saves

cabinet space

BurnerLogix

The Fireye Burner Logix System provides the proper burner sequenc-

ing, ignition and ﬂame monitoring protection on automatically ignited

oil, gas, and combination fuel burners. In conjunction with limit and

operating controls, it programs the burner/blower motor, ignition and

fuel valves to provide for proper and safe burner operation.

A complete BurnerLogix system includes the YB110 chassis equipped

with a ﬂame ampliﬁer, appropriate ﬂame detector, plug-in programmer

module, wiring base and optional alphanumeric display. The chassis/

ﬂame ampliﬁer module comes complete with mounting screws and

blank display module.

Interchangeable programmer modules allow for complete versatility

in selection of control function, timing, and ﬂame scanning means. The

programming module determines functions like pre-purge time, recy-

cling or non-recycling interlocks, high ﬁre proving interlock, and trial for

ignition timing of the pilot and main ﬂame.

The BurnerLogix system can be used with ultraviolet, auto-check in-

frared, ﬂame rod, self-check ultraviolet ﬂame scanners, or direct coupled

by choosing the proper chassis/ﬂame ampliﬁer module.

BurnerLogix’ operational characteristics are

determined by the selection of the programmer

module (e.g. modulation, recycle, non-recycle,

ﬁxed ﬁring, ﬂame failure response time, etc.). The

programmer module incorporates a plug-in design

for easy installation.

Wiring bases for the BurnerLogix control are

available pre-wired with 4 foot lead wires color

coded and marked for easy installation or with an integral terminal block

capable of accepting up to 2X 14 AWG wires. The wiring base terminal

block is available with knockouts for conduit, or open ended for cabinet

mounting.

Display Modules

The BurnerLogix system offers

vacuum ﬂuorescent (VFD) and liq-

uid crystal (LCD) displays that can

be either plugged in or mounted

remotely to give full language

descriptors of current status and diagnostic lockout information.

Both displays contain a fully functional keypad so you can easily scroll

through the various menus to view the current operating status, and

review programmer conﬁguration and lockout history.

Remote mounted displays meet NEMA 4X requirements.

BurnerLogix™ Burner Management System

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

Flame Scanners

69ND1: Flame rod made

of high temperature resistant

metal. Can only be used to

detect gas ﬂames. Rods are available in 12”, 18”, and 24” lengths.

UV1A: Ultraviolet miniature non self-

checking scanners suitable for fuel gases

and #2 oil. Non-replaceable tube. Mounting

collar 1/2” NPT.

48PT2: Lead sulﬁde scanner is designed to

detect low frequency IR signals from gas or oil

ﬂames. Mounting collar is 1/2” NPT with straight

or 90° mounts. 8 ft. ﬂexible conduit. Replaceable

sensor cell.

45UV5: Self-checking ultraviolet scanner for con-

tinuously ﬁred applications where recycling in

infrequent or absent. The self-checking circuit

checks the electronics and the UV tube for

proper operation every 4 seconds during the ﬁring

period. Suitable for fuel gases and oil. Replaceable UV

tube and shutter mechanism. Mounting 1” NPT. Must

be installed with metal shielding over the scanner leads.

Flame Ampliﬁer Module

Flame ampliﬁer modules are used with the

appropriate ﬂame scanner to provide ﬂame

scanning capability. Fireye offers ultraviolet

ampliﬁers and ﬂame rectiﬁcation ampliﬁers

for use with ﬂame rods, photocells and auto-

check infrared ampliﬁers.

Self-checking ultraviolet scanners and

ampliﬁers should be used in applications

where burner ﬁring operation is continuous

or where the burner is on for long periods

of time without cycling.

Flame Monitor Series Burner Control System

Model Selection Guide

Catalog Avail-

Component Description Number ability Price

Chassis 120VAC Chassis with Mounting

Screws and Dust Cover E110 • • • • $701.00

Program 30 Sec. Purge, 10/15 Sec. TFI, 4 Sec.

Module FFRT, Non-Recycle Modulation EP160 • • • • 952.00

Display 2 Line x 16 Character LCD

Display with Keypad ED510 • • • • 494.00

Flame Non Self-Checking Scanner, 3 Ft.

Scanner Flexible Cable, 1/2” NPT Conn. UV1A3 ↓ 160.00

Non Self-Checking Scanner, 6 Ft.

Flexible Cable, 1/2" NPT Conn. UV1A6 ↓ 189.00

Infrared Scanner, 8 Ft Shielded

Cable with 90° Head 48PT2-9003 ↓ 252.00

Ultraviolet Self-Checking Scanner

120 VAC Shutter, 1" NPT Thread 45UV5-1009 ↓ 1373.00

12" Flame Rod for Gas Flames,

1/2" NPT Connection 69ND1-1000K4 ↓ 106.00

Standard Ultraviolet Amplier EUV1 • 373.00

Amplier Autocheck Infrared Amplier E1R1 • 552.00

Module Self-Check Ultraviolet Amplier EUVS4 • 625.00

Flame Rectication Amplier ERT1 • 367.00

Wiring Surface Mount 60-1386-2 • • • • 105.00

Base Panel Mount 60-1466-2 • • • • 105.00

BURNER

CONTROLS

Flame-Monitor Series

The Flame-Monitor Series provides

the proper burner sequencing, igni-

tion and ﬂame monitoring protection

on automatically ignited oil, gas and

combination fuel burners.Inter change-

able programmer and ﬂame ampliﬁer

modules allow complete versatility in

selecting control function. The ﬂame-

monitor control uses the same wiring

base as the Fireye D-Series and C-Series

Controls and is directly interchangeable

with most models with out rewiring.

The Flame-Monitor control can be

used with ultraviolet, AUTOCHECK® in-

frared, photocell, ﬂame rod or self-check

ultraviolet ﬂame scanners. Special features

include remote reset, remote display,

expanded annunciation of safety lockouts, programmability of safety

interlock messages, and remote data communications capability.

The complete Flame-Monitor control consists of a chassis, display

module, programmer, ampliﬁer, scanner and a wiring base.

EP Programmer Module

The Fireye EP Programmer Modules

provide start-up programming, safe

start check, and ﬂame monitoring su-

pervision. They ensure open damper

high ﬁre purge interlock, proof of low

ﬁre position and fuel valve end switch

safety checks.

A running interlock circuit constantly

monitors the limit switches, air ﬂow

switches and fuel pressure switches

throughout the programmer. EP pro-

grammer modules will de-energize all fuel valve circuits within 4 seconds

following a ﬂame failure or at the end the pilot-trail-for-ignition period

if no ﬂame is detected.

The EP programmers provide a Check-Run switch to stop the control

in its ﬁring sequence at any time (except MTFI) to aid in setup, start-up,

and check out of the burner and its associated interlocks.

EP programmers offer the following functions: an increase of purge

timing and air ﬂow switch opened at the start of the operating cycle.

EP programmers include an RJ45 style connector to interface with the

ED510 display module. EP programmers store the burner cycle and on-

time history, as well as lockout history (with burner cycle and burner

hour time stamp).

ED510 Display Module

• LCD backlit display with 2 lines of 16 characters each

• RJ style connector

• Mounts directly onto front face of programmers

• Continuous display of current burner

status, including ﬁrst out annunciation

in the event of a lockout condition

• Remote display using DIN-sized opening

and remote mounting kit.

• 3-key keypad provides historical data

from the burner, the last 6 lockout condi-

tions (with burner cycle and burner hour

time stamp)

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

The 65UV5 ﬂame scanner incorporates an inter-

nal single pole, single throw (normally open) ﬂame

relay with a ﬁxed on/off threshold to provide ﬂame

on/ﬂame off indication, eliminating the need for

an external ﬂame ampliﬁer.

The scanner uses an ultraviolet tube-type sen-

sor, and electromechanical self-checking shutter

mechanism. The NEMA 4X/IP66 housing is suit-

able for use in Class I Division II, Group C and D

hazardous environments.

The Fireye 65UV5 ﬂame scanner is powered

by 24 VDC and includes an integral 10-foot

four-conductor cable with cable gland. Two

color-coded internal LEDs indicate ﬂame sta-

tus (off/on) and alarm condition. These can

be viewed through the removable rear access

screw opening.

Model Selection Guide

Catalog

Description Number Price

Integrated Flame Scanner, 1” NPT Mounting Flange, 4 Second Flame Failure Response Time 65UV5-1004 $1544.00

BURNER

CONTROLS

65UV5 Integrated Flame Scanner with Internal Flame Relay

MB Series Industrial Multiburner Flame Safeguard System

The Fireye Multi-Burner Monitoring System controls the start-up

sequence and monitors the ﬂame of up to 20 individual gas, oil or

combination gas/oil burners connected to a common valve train.

Dynamic on-board diagnostics check for faulty relays, proof of valve

closure, high and low ﬁre switch interlocks, and shortened air switch.

The MB is even able to speciﬁcally identify which burner caused the

initial ﬂame failure.

Plug-in ﬂame sensor modules that can sense UV, UV self-check or

ﬂame rod provide for easy replacement on an individual basis. Con-

ﬁguration and startup time is reduced through use of on-board DIP

switches, which also allow sequencing and timing functions.

The MB-600S chassis directly powers pilot and main gas valves and

ignition transformers. The built in blower output, purge timing and

modulation control, let you add independent limits and a controller

to create a complete combustion control system for furnace, oven or

other multi-burner applications.

Speciﬁcations

Number of Burners: 20 max.

Pilot Proving Time: 7 seconds

Purge Time: 0 sec to 60 min

Pilot Trial for Ignition: 5, 10 or 15 seconds

Flame Failure Response Time: 3 (±0.5) seconds

Valve Operation: Simultaneous (all burners operate from one fuel train)

Supply Voltage: 120VAC, 50/60 Hz; Power Consumption: 25VA

Temperature Rating: -32° to 122°F (-36° to 50°C)

Contact Ratings: Fan Motor: 15 Amp Resistive; Others: 10 Amp Resistive

UV7R4

90° UV Scanner

UV7A4 UV Scanner

UV7SC

Self-Check

UV Scanner

Modulation for Purge and

Low Fire Start Control

Four

Auxiliary

Inputs

Valve Leak

Detection

Interface

LED indicator alert you to

process step and status

Connects to

optional Remote

Display Module

Optional

Expansion

Modules for

control of up

to 20 burners

Up to four

burner

ampliﬁers

mounted on

MB-600

A single MBPF ampliﬁer module handles UV,

UV Self-Check and Flame Rod scanners Model Selection Guide

Tip: If your system has between 4 and 8 burners, select 1 MB-604E module and a

connecting cable. If your system has between 9 and 13 burners, select 1 MB-

608E module and a connecting cable. For systems that have 14 to 20 burners,

you can mix MB-604E and MB-608E modules to ﬁt.

Catalog

Description Number Price

Step 1: Select a Chassis for your Multiburner Control System

120VAC 50/60Hz, Motherboard, Relay

Board, Logic Module, and Power Module.

4 Auxiliary Inputs, Purge Modulation,

Valve Leak Testing MB-600S $1769.00

120VAC 50/60Hz, Motherboard with RS-232

Communications, Relay Board, Logic

Chassis Module, Power Module. 4 Auxiliary Inputs,

Purge Modulation, Valve Leak Testing MB-632S 1903.00

120VAC 50/60Hz, Motherboard with RS-485

Communications, Relay Board, Logic

Module, Power Module. 4 Auxiliary Inputs,

Purge, Modulation, Valve Leak Testing MB-685S 1903.00

Step 2: Select a Flame Sensor Module

Sensor Plug-In Flame Sensor Module, UV/FR

Module Plastic Case with Mounting Screws MB-600PF 354.00

Step 3: For Systems with More than 4 Burners, Select Expansion Board Mod-

ules and Cables

Expansion Board for up to 4 Burners MB-604E 316.00

Expansion Expansion Board for up to 8 Burners MB-608E 638.00

Modules 6” Cable for Expansion Board 59-506-1 34.40

36” Cable for Expansion Board 59-506-3 48.60

Step 4: Select Optional Remote Display and Cable

Remote Display with Keypad MB510 448.00

Display 6 Ft. Cable for Remote Display 59-507-6 23.60

10 Ft. Cable for Remote Display 59-507-10 35.40

Step 5: Select One Flame Scanner for Each Burner on Your System

1/2” NPT Straight UV Scanner, 4 Ft. Flex

Conduit, Insulated Nylon Coupling UV7A4 181.00

1/2” NPT UV Scanner, NEMA 4, 4 Ft. Flex

Scanners Conduit, Insulated Nylon Coupling UV7A4W 241.00

and 1/2” NPT 90° UV Scanner, 6 Ft Shielded Cable UV7R4 148.00

Accessories 1” NPT Self-Check Scanner UV7SC 970.00

10 Ft Cable for UV7SC Self-Check Scanner 59-504-010 150.00

Scanner Support, Max Temp 200°F 36-935 35.60

Magnifying Lens Assembly 46-185 90.60

Magnifying Lens 46-186 22.20

Non-Magnifying Lens 46-187 28.20

1/2” NPTF Insulated Nylon Coupling 35-319 17.40

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

Flame Relays and Burner Control Units

IFS 258 IFS 110IM BCU 370

Operating Time < 24 Hours < 24 Hours > 24 Hours

Ignition Type Direct Direct Direct or Pilot Burner

Signal Line Length 75M Max 50M Max 50M Max

Behavior at Flame

Failure

Switchable: Fault Lockout

or Restart

Fault Lockout

and/or Restart

Programmable

Gas Valve Outputs 122

IFS 258 Burner Control Unit

For use in single- and multiburner atmospheric or forced-air burner systems. Can be used

with on/off, high/low or proportional control. Add external timer to provide purge timing.

• Compatible with ame rods or UV detectors

• Front panel indicators display burner unit on,

ﬂame on, and ﬂame failure information

• Start/stop/reset switch on front of unit

• Can be programmed to restart or immediate

fault lockout following ﬂame failure

• CSA, FM approved

Model Selection Guide

Pilot Flame Catalog

Description Establishing Period Number Price

Burner control unit for intermittent operation with switchable

fault lockout or restart, FFRT 2 seconds

IFS 258T-3/2R 3 seconds 84620420 $307.00

IFS 258T-5/2R 5 seconds 84620440 307.00

IFS 258T-10/2R 10 seconds 84620460 307.00

IFS 110IM Burner Control Unit

Automatic burner control for ignition and control of gas burners in gas-ﬁring installations of

all types. Designed for high cycling frequency and long life.

• Flame control by means of ame rods or

UV detectors

• Performs ame simulation check before

starting burner and after switching off

• Semiconductor output for ignition trans-

former — no switch contacts

• High cycling frequency

• Remote reset

• External fault indication

• FM approved

• Can be used for multiburner control by

adding ﬂame relay IFW 15T

Model Selection Guide

Catalog

Description Number Price

Flame relay. Use with IFS 110IM burner control

for multiburner apps.

IFW 15T-N Flame Relay 84359100 $200.00

Pilot Flame Catalog

Description Establishing Period Number Price

Burner control unit for intermittent pilots, FFRT 2 seconds, fault

lockout and restart following ﬂame failure

IFS 110IMT-3/2/2N 3 seconds 84367700 $414.00

IFS 110IMT-5/2/2N 5 seconds 84367710 414.00

IFS 110IMT-10/2/2N 10 seconds 84367720 414.00

Burner control unit for intermittent operation FFRT 2 seconds,

restart following ﬂame failure

IFS 110IMT-W-3/2/2N 3 seconds 84367750 434.00

IFS 110IMT-W-5/2/2N 5 seconds 84367760 434.00

IFS 110IMT-W-10/2/2N 10 seconds 84367770 434.00

Model Selection Guide

IFW 15T Flame Relay

Detect and signal existing ﬂame.

• Compatible with ame rods or UV detectors

• Potential-free contacts

• Integrated ON lamp

• Use with IFS 110IM for multiburner control

• Great for letting your PLC know when ame is present

Add an IFW 15T

ame relay to your

IFS 110 IM for

multiburner control.

Choosing the Right

Kromschroder Burner Control

BURNER

CONTROLS

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

Model Selection Guide

Catalog

Description Number Price

UVS 8T Ultraviolet Detector 84333120 $134.00

UV Replacement Tube 74960445 111.00

UVS 8T Ultraviolet Flame Detector

For use in forced and induced draft burners, ovens, gas-ﬁred boilers, industrial furnaces, and

installations for the ﬂaring of excess gas.

• High sensitivity over an ambient temperature range -40° to 176°F

• Insensitive to sunlight, daylight, infrared radiation, and incandescent lamps

• UV tube life expectancy of 10,000 operating hours

• Protects against interruptions or short circuits in the ame

signal line

• Rugged aluminum construction with integral 1/2” NPTF

threaded collar and 6-foot leads

• FM approved

BCU 370 Burner Control Unit

Controls, ignites, and monitors industrial forced-air burners of unlimited capacity in

intermittent or continuous operation. Can be used for direct-ignited or pilot-burner systems.

• Controls fan and buttery valve, monitors gas and air pressure

• Manual operating mode and informative operating, warning, and fault messages make startup, service, and

and maintenance simple

• Optional integrated tightness control function checks valves with a DG gas pressure switch

• Quick-start option allows standard-compliant startup of forced air burner without pre-purge after normal

shutdown

• Programmable via optical interface and BCSoft PC software

Model Selection Guide

Catalog

Description Number Price

For controlling, igniting, and monitoring industrial forced-air burners, intermittent operation, ionization or UV control.

120 VAC 50/60 Hz power, fan (blower) and butterﬂy valve control

BCU 370QFEU0D1 No ignition unit, ﬂame control DGmax 88600122 $530.00

BCU 370QI1FEU0D1 Single-pole electronic ignition, ﬂame control DGmax 88600249 650.00

BCU 370QI1FEU0D1B1 Single-pole electronic ignition, ﬂame control DGmax,

ProﬁBUS-DP interface 88600236 858.00

BCU 370QFEU0D3B1-3 No ignition unit, integrated tightness control, ProﬁBUS-DP interface

and butterﬂy valve control over ProﬁBUS 88600121 1111.00

Opto Adapter and BCSoft CD-ROM for BCU 370s 74960437 263.00

BURNER

CONTROLS

Coming soon to Lesman.com:

Buy Kromschroder burner controls from

our secure web store!

When you need to learn more, the

Lesman website has:

• Downloadable specications

• Dimensional drawings

• 24/7/365 availability

Visit us anytime at www.lesman.com

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

Pressure Switches for Gas Applications

DG..VT Safety Limit Pressure Switches

Diaphragm-actuated safety limit switch controls rising or falling pressures that must not

overshoot or undershoot a set limit

value, and controls the minimum

or maximum gas inlet pressure of a

gas control line.

• For use with natural gas and air

• Die-cast aluminum base, glass-lled PBT

switch housing, NBR diaphragm, and

polycarbonate cover

• Available with Valvario mount for direct

connection to Kromschroder modular

valve trains

• Ambient temperatures 5° to 140°F

• 4-pin DIN/Amp plug wiring connector

Model Selection Guide

Adjustable Catalog

Description Range Connection Number Price

DG pressure switch with 4-pin plug, socket, and 18” ﬂexible leads

DG 17VCT6-6W 0.8” to 6.8” WC 1/8 NPTM 84448040 $49.00

DG 40VCT6-6W 2.0” to 16” WC 1/8 NPTM 84448840 49.00

DG 110VCT6-6W 12” to 44” WC 1/8 NPTM 84448440 49.00

DG 300VCT6-6W 40” to 120” WC 1/8 NPTM 84448940 49.00

DG 17VCT8-6W 0.8” to 6.8” WC 1/4” NPTM 84448090 49.00

DG 40VCT8-6W 2.0” to 16” WC 1/4” NPTM 84448890 49.00

DG 110VCT8-6W 12” to 44” WC 1/4” NPTM 84448490 49.00

DG 300VCT8-6W 40” to 120” WC 1/4” NPTM 84448990 49.00

DG 17/VCT1-6W 0.8” to 6.8” WC Valvario 75454583 78.00

DG 40/VCT1-6W 2.0” to 16” WC Valvario 74214174 78.00

DG 110/VCT1-6W 12” to 44” WC Valvario 75454585 78.00

DG 300/VCT1-6W 40” to 120” WC Valvario 75454586 78.00

DG Pressure Switches

Monitors positive air and gas

pressures, negative or differential

air pressures in industrial and

commercial applications.

• Accurate repeatable switching action

with low hysteresis

• Die-cast aluminum alloy base, glass ber-

reinforced plastic switch housing, nitrile

rubber diaphragm, and high-quality

injection-molded plastic covers

• One normally open and one normally

closed contact in each switch (5A resis-

tive or 0.5A inductive

• Automatic and manual reset models

• 8A quick-acting fuse for short circuit

protection

• FM approved, cULus listed

Model Selection Guide

Adjustable Catalog

Description Range Connection Number Price

DG..T pressure switch with 110V control lamp (green) for positive,

negative, and differential pressure, automatic reset

DG 6T 0.2” to 2.4” WC 1 x 1/4” NPT 84447800 $64.00

DG 10T 0.4” to 4” WC 1 x 1/4” NPT 84447810 64.00

DG 50T 1.0” to 20” WC 1 x 1/4” NPT 84447820 64.00

DG 150T 12” to 60” WC 1 x 1/4” NPT 84447830 64.00

DG 500T 40” to 200” WC 1 x 1/4” NPT 84447840 64.00

DG 6T 0.2” to 2.4” WC 2 x 1/4” NPT 84447802 63.00

DG 10T 0.4” to 4” WC 2 x 1/4” NPT 84447812 63.00

DG 50T 1” to 20” WC 2 x 1/4” NPT 84447822 63.00

DG 150T 12” to 60” WC 2 x 1/4” NPT 84447832 63.00

DG 500T 40” to 200” WC 2 x 1/4” NPT 84447842 63.00

DG..HT pressure switch with manual reset, locks on pressure rise

DG 10HT 0.4” to 4” WC 2 x 1/4” NPT 84447912 77.00

DG 50HT 1.0” to 20” WC 2 x 1/4” NPT 84447922 77.00

DG 150HT 12” to 60” WC 2 x 1/4” NPT 84447932 77.00

DG 500HT 40” to 200” WC 2 x 1/4” NPT 84447942 77.00

DG..NT pressure switch with manual reset, locks on pressure fall

DG 10NT 0.4” to 4” WC 2 x 1/4” NPT 84447962 77.00

DG 50NT 1.0” to 20” WC 2 x 1/4” NPT 84447972 77.00

DG 150NT 12” to 60” WC 2 x 1/4” NPT 84447982 77.00

DG 500NT 40” to 200” WC 2 x 1/4” NPT 84447992 77.00

PRESSURE

CONTROLS

The new RAECO Rents instrumentation

catalog is now available! Get yours FREE!

• LookingforportableLELmonitorsorcombustioneciencyanalyzers?Checkwith

ourpartnersatRAECO!

• Rentalsavailableonadaily,weekly,ormonthlybasis

• Allparts,accessories,andsoftwareavailable

• Automatic5%rentalfeediscountwhenyourentonlineatwww.raeco.com

Visit www.raeco.com to request a print catalog or download the free PDF.

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

Butterﬂy Valves and Actuators

BV Butterﬂy Valves

High accuracy valves for control of gas ﬂow rates. Mount on IC 20 or IC 40 actuators to

regulate ﬂow rates for modulating or stage-controlled combustion systems.

• Low leakage rate and pressure loss

• Other models available for ue gas and high temperature air ow rates to 840°F. Call Lesman for details

Model Selection Guide

Temperature Bore Nominal Reduced Compatible Catalog

Model Range Size Diameter Nominal Diam. Actuator Number Price

Butterﬂy valve for continuous control of gas ﬂow rates, ratio of 10:1. Maximum inlet pressure 7.25 PSI.

BVG 40TW05 -4° to 140°F Full 1 1/2” IC 20 or IC 40 74105790 $196.00

BVG 65TW05 -4° to 140°F Full 2 1/2” IC 20 or IC 40 74105792 226.00

BVG 50TW05 -4° to 140°F Full 2” IC 20 or IC 40 74105791 208.00

BVG 80TW05 -4° to 140°F Full 3” IC 20 or IC 40 74105793 257.00

BVG 100TW05 -4° to 140°F Full 4” IC 20 or IC 40 74105794 273.00

BVG 40/32TW05 -4° to 140°F 1X Reducing 1 1/2” 1 1/4” IC 20 or IC 40 74214264 255.00

BVG 50/40TW05 -4° to 140°F 1X Reducing 2” 1 1/2” IC 20 or IC 40 74214263 294.00

BVG 65/50TW05 -4° to 140°F 1X Reducing 2 1/2” 2” IC 20 or IC 40 74214262 316.00

BVG 80/65TW05 -4° to 140°F 1X Reducing 3” 2 1/2” IC 20 or IC 40 74105783 361.00

BVG 100/80TW05 -4° to 140°F 1X Reducing 4” 3” IC 20 or IC 40 74105784 376.00

BVG 40/25TW05 -4° to 140°F 2X Reducing 1 1/2” 1” IC 20 or IC 40 74214267 255.00

BVG 65/40TW05 -4° to 140°F 2X Reducing 2 1/2” 1 1/2” IC 20 or IC 40 74214265 316.00

BVG 50/32TW05 -4° to 140°F 2X Reducing 2” 1 1/4” IC 20 or IC 40 74214266 294.00

BVG 80/50TW05 -4° to 140°F 2X Reducing 3” 2” IC 20 or IC 40 74105875 361.00

BVG 100/65TW05 -4° to 140°F 2X Reducing 4” 2 1/2” IC 20 or IC 40 74105782 401.00

Need a buttery

valve for ue gas

or high temperature

air ow rates? Call

Lesman for pricing

and availability.

Compatible Valve Actuators for BV Butterﬂy Valves

Reversible gear motors to transmit rotary movements between 0° and 90°.

• IC 20 for basic applications with continuous or three-point step control, automatic/manual mode changeover

for easy commissioning. IC 20..E is controlled by 0/4-20 mA or 0-10V signal

• IC 40 for complex applications with programmable functions for exible adjustment to the process. Compat-

ible with BCSoft for data monitoring, troubleshooting, and programming

Model Selection Guide

BUTTERFLY

VALVES

Torque Run Time Controlling Catalog

Description (Lb-in) (Over 90° Stroke) Signal Number Price

IC 20 Reversible gear motor, 120 VAC, 50/60 Hz

IC 20-07Q2 22 Lb-in 7.5 seconds Three-point step 74105712 $311.00

IC 20-15Q3 26.5 Lb-in 15 seconds Three-point step 74105713 311.00

IC 20-30Q3 26.5 Lb-in 30 seconds Three-point step 74105714 311.00

IC 20-60Q3 26.5 Lb-in 60 seconds Three-point step 74105715 311.00

IC 20-07Q2E 22 Lb-in 7.5 seconds Continuous 74105998 741.00

IC 20-15Q3E 26.5 Lb-in 15 seconds Continuous 74105999 741.00

IC 20-30Q3E 26.5 Lb-in 30 seconds Continuous 74106000 741.00

IC 20-60Q3E 26.5 Lb-in 60 seconds Continuous 74106001 741.00

Torque Catalog

Description (Lb-in) Additional Input/Output Functions Number Price

IC 40 Reversible gear motor, 100-230 VAC, 50/60 Hz

IC 40TA2 22 Lb-in — 74105760 $603.00

IC 40TA2A 22 Lb-in 4-20 mA input 74105761 620.00

IC 40TA2R10 22 Lb-in 1000Ω feedback potentiometer 74105762 691.00

IC 40TA2AR10 22 Lb-in 4-20 mA input and 1000Ω feedback potentiometer 74105763 746.00

IC 40TSA3 26.5 Lb-in Safety closing function 74105764 736.00

IC 40TSA3A 26.5 Lb-in Safety closing, 4-20 mA input 74105765 795.00

IC 40TSA3R10 26.5 Lb-in Safety closing, 1000Ω feedback potentiometer 74105766 820.00

IC 40TSA3AR10 26.5 Lb-in Safety closing, 4-20 mA input, 1000Ω feedback potentiometer 74105767 879.00

Loose (/B) Assembled /E)

IC 20/40 Attachment Set 74921671 $74.00 74921747 $69.00

IC 20/40 Adapter - Free Shaft End 74921676 60.00 74921677 68.00

IC 20/40 Adapter - Manual Adjustment 74921678 47.00 74921679 52.00

IC 20/40 Adapter - Square Shaft 74921674 74.00 74921675 69.00

IC 40 Accessory: Fastening Set IC-BV 74921082 8.00 74921084 9.00

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

SOLENOID

VALVES

Compact Solenoid Valves

Valvario® VAS Safety Shut-Off Solenoid Valves

Normally closed solenoid valves for gas. For safeguarding and controlling air and

gas supply to gas burners and appliances. For use in gas control and safety systems

in all sectors of the iron, steel, glass, and ceramics industries, plus commercial heat

generation in packaging, paper, and food industries.

• Modular design saves space and piping work

• Main gas valve, pilot valve, regulator and pressure switch are all available for direct “stack” mounting

for one small modular footprint

• Changeable mounting plates make it easy to reduce input/output size and ange size. Reduces need

for keeping multiple sizes in inventory

• Modular-mount mercury-free pressure switch has test port and <25% deadband

• Can be equipped with Proof of Closure visual indicator

• High ow rate and low pressure drop

• CSA, FM, CE approvals Model Selection Guide

Valve Inlet/Outlet Catalog

Series Size Flange Size Number Price

VAS Quick Opening, NPT Threaded Connection

VAS 1T10N/NQ 1 3/8” 88001831 $181.00

VAS 1T15N/NQ 1 1/2” 88001832 181.00

VAS 1T20N/NQ 1 3/4” 88001842 215.00

VAS 1T25N/NQ 1 1” 88001830 224.00

VAS 2T25N/NQ 2 1” 88001849 288.00

VAS 2T32N/NQ 2 1 1/4” 88001850 288.00

VAS 2T40N/NQ 2 1 1/2” 88001851 296.00

VAS 2T50N/NQ 2 2” 88001852 296.00

VAS 3T40N/NQ 3 1 1/2” 88001853 404.00

VAS 3T50N/NQ 3 2” 88001854 404.00

VAS 3T65N/NQ 3 2 1/2” 88001855 432.00

VAS Quick Opening, ANSI Flanged Connection, No Accessory Connection

VAS 6T65A05NQP 6 2 1/2” 88200132 854.00

VAS 7T80A05NQP 7 3” 88200148 1357.00

VAS 8T100A05NQP 8 4” 88200162 1835.00

VAS 9T125A05NQP 9 5” 88200160 2923.00

VAS Quick Opening, ANSI Flanged Connection, Two Screw Plug

Connections for Accessory Connections at Right Inlet/Outlet

VAS 6T65A05NQP/PP/PP 6 2 1/2” 88200385 1028.00

VAS 7T80A05NQP/PP/PP 7 3” 88200390 1533.00

VAS 8T100A05NQP/PP/PP 8 4” 88200394 2014.00

VAS 9T125A05NQP/PP/PP 9 5” 88200427 3106.00

VAS Slow Opening, NPT Threaded Connection

VAS 1T10N/LQ 1 3/8” 88001856 226.00

VAS 1T15N/LQ 1 1/2” 88001857 226.00

VAS 1T20N/LQ 1 3/4” 88001858 269.00

VAS 1T25N/LQ 1 1” 88001859 269.00

VAS 2T25N/LQ 2 1” 88001860 333.00

VAS 2T32N/LQ 2 1 1/4” 88001861 333.00

VAS 2T40N/LQ 2 1 1/2” 88001862 342.00

VAS 2T50N/LQ 2 2” 88001863 342.00

VAS 3T40N/LQ 3 1 1/2” 88001864 450.00

VAS 3T50N/LQ 3 2” 88001865 450.00

VAS 3T65N/LQ 3 2 1/2” 88001869 479.00

VAS Slow Opening, ANSI Flanged Connection, No Accessory Connection

VAS 6T65A05LQP 6 2 1/2” 88200133 936.00

VAS 7T80A05LQP 7 3” 88200149 1439.00

VAS 8T100A05LQP 8 4” 88200163 1917.70

VAS Slow Opening, ANSI Flanged Connection, Two Screw Plug

Connections for Accessory Connections at Right Inlet/Outlet

VAS 6T65A05LQP/PP/PP 6 2 1/2” 88200387 1110.00

VAS 7T80A05LQP/PP/PP 7 3” 88200391 1615.00

VAS 8T100A05LQP/PP/PP 8 4” 88200395 2095.00

Speciﬁcations

Inlet Pressure: (pe): 7 PSIG max

Non-Operational Pressure: FM approved: 10 PSIG; CSA approved: 5 PSIG

Flow Adjustment: Limits max ow between 20% and 100%. On VAS 1-3 sizes,

the setting can be monitored on an indicator

Adjustment of Start Gas Rate: 0% to 70%

Opening Times: VAS/N quick opening: ≤1sec; VAS/L slow opening: up to 30 sec

Closing Time: <1 second

Ambient Temperature: -4° to 140°F

Safety Valve: Class A, Group 2, pursuant to EN 13611 and EN 161; FM research

class 7410 and 7411, ANSI Z21.21, CSA 6.5

Materials: IP65 enclosure; Valve housing: Aluminum, Valve seal: NBR

Voltage: 120 VAC, 50/60 Hz

Current Consumption (at 68°F): Pickup: 1.8 amp; Holding: 0.3 amp

Switching Frequency: 5x per minute, except VAS 9: Once per minute

Switching Cycles: 0.1 amp: 500,000; 0.5 amp: 300,000; 1 amp: 200,000; 3 amp:

100,000

Flow Rates

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

Comparing ASCO Combustion Valves

8030 8040 8210 8214 8215 8262

Valve

Parts In

Contact

with

Fluids

Brass body

305 SS core tube

NBR seals/disc

430F SS core/plugnut

Copper shading coil

302 SS springs

Aluminum body

305 SS core tube

NBR seals/disc

430F SS core/plugnut

Copper shading coil

302 SS springs

Zinc-plated steel pipe

plug

Brass body

305 SS core tube

NBR seals/disc

430F SS core/plugnut

Copper shading coil

Aluminum body

305 SS core tube

NBR seals/disc

430F SS core/plugnut

Copper shading coil

302 SS springs

Zinc-plated steel pipe

plug

Aluminum body

305 SS core tube

NBR seals/disc/

diaphragm

430F SS core/plugnut

302 SS or 17-7 PH

springs

Copper shading coil

CA core guide

305 SS core tube

Brass body

305 SS core tube

NBR seals/disc

430F SS core/plugnut

Copper shading coil

Inconel 600 springs

Acetal core guide

PTFE rider ring

Approvals UL, FM, CSA UL, CSA,

FM (3/8” to 3/4” only)

UL, FM, CSA UL, FM, CSA UL, CSA,

FM (except 8215A090

and 8215A040)

UL, FM, CSA

Looking for another ASCO solenoid valve? Call Lesman’s solenoid valve specialists at 800-837-1700. We stock deep!

SOLENOID

VALVES

Solenoid Valves for Combustion Systems

Model Selection Guide

120 volts AC/60 Hz — All Valves Shown Here are Normally Closed (Closed when De-Energized), Suitable for Use in Fluids to Maximum Temperatures 125°F

Operating Pressure Watt Rating/ Solenoid Valve Repair Kit Replacement Coil

Cv Gas Differential (PSI) Class of

Pipe Oriﬁce Flow Capacity Coil Catalog Price Catalog Price Catalog Price

Size Size Factor BTU/Hr Min. Max. Insulation Number Each Number Each Number Each

Direct Acting Gas Shutoff Valves

1/8” 5/16” 1 53,700 0 15 6.1/F 8040H006 $64.00 318247 $66.00 238210-032-D $61.00

1/4” 9/32” 0.96 51,700 0 40 10.1/F 8262G078 65.00 306631 47.00 238610-032-D 69.00

1/4” 5/16” 1.1 59,000 0 15 10.1/F 8040H007 65.00 318247 66.00 238210-032-D 61.00

3/8” 3/8” 1.8 97,000 0 15 10.1/F 8030G068 154.00 306628 104.00 238610-032-D 69.00

1/2” 7/16” 2.8 151,000 0 8 10.1/F 8030G069 157.00 306629 108.00 238610-032-D 69.00

1/2” 3/4” 5.4 291,000 0 2 10.1/F 8040G022 127.00 306633 63.00 238610-032-D 69.00

3/4” 3/4” 9.5 512,000 0 2 10.1/F 8040G023 132.00 306633 63.00 238610-032-D 69.00

1” 1-5/8” 16.8 900,000 0 0.5 15.4/F 8040C004 158.00 304079 104.00 099257-001-D 91.00

Pilot Operated Gas Shutoff Valves

3/8” 5/8” 2.8 150,000 0 50 10.1/F 8210G074 179.00 304076 128.00 238610-032-D 69.00

3/8” 3/4” 3.4 183,000 0 50 10.1/F 8215G010 135.00 302350 104.00 238610-032-D 69.00

1/2” 5/8” 3.6 193,000 0 50 10.1/F 8210G075 179.00 304076 128.00 238610-032-D 69.00

1/2” 3/4” 4.4 238,500 0 50 10.1/F 8215G020 135.00 302350 104.00 238610-032-D 69.00

3/4” 5/8” 5.0 295,000 0 50 10.1/F 8210G076 196.00 304076 128.00 238610-032-D 69.00

3/4” 3/4” 5.1 247,500 0 50 10.1/F 8215G030 139.00 302350 104.00 238610-032-D 69.00

3/4” 1-5/8” 11 580,000 0 50 15.4/F 8215 135 250.00 302352 184.00 099257-001-D 91.00

1” 1-5/8” 21 1,119,000 0 25 15.4/F 8215B050 252.00 302352 184.00 099257-001-D 91.00

1-1/4” 1-5/8” 32 1,730,000 0 25 15.4/F 8215B060 252.00 302352 184.00 099257-001-D 91.00

1-1/2” 1-5/8” 35 1,900,000 0 25 15.4/F 8215B070 292.00 302352 184.00 099257-001-D 91.00

2” 2-3/32” 60 3,251,000 0 25 15.4/F 8215B080 428.00 302353 221.00 099257-001-D 91.00

2-1/2” 3” 117 5,821,000 0 5 28.2/F 8215A090 835.00 302354 362.00 206409-011-D 188.00

3” 3” 138 7,430,000 0 5 28.2/F 8215A040 835.00 302354 362.00 206409-011-D 188.00

Gas Shutoff Valves with Waterproof Enclosures

3/8” 3/4” 3.4 183,000 0 5 17.1/F 8214G010 135.00 316233 143.00 238610-132-D 83.00

1/2” 3/4” 4.4 238,500 0 5 17.1/F 8214G020 135.00 316233 143.00 238610-132-D 83.00

3/4” 3/4” 5.1 247,500 0 5 17.1/F 8214G030 139.00 316233 143.00 238610-132-D 83.00

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

STACK GAS

ANALYZER

Reﬁneries and power plants measure excess oxygen to improve their

energy efﬁciency and reduce fuel consumption.

In most oxygen analyzers, the electronic sensor comes in direct contact

with the sample gas, so you have to remove the hot probe every time

you service the sample gas ﬁlter or the sensor. And, you need to stock

probe-length-speciﬁc spare parts inventory for these systems.

Cosa Zircomat oxygen analyzers are more user-friendly. In the Zircomat

system, the sample gas is deﬂected to the sensor. To increase safety, the

probe always stays in the stack. The small, hand-held oxygen detector is

quickly detachable for service. And, one detector ﬁts all Zircomat probes,

any model any length!

Small and easily detachable, the Zircomat detector can be serviced

without removing the probe from the ﬂue stack. You won’t need to shut

down your plant just to remove the probe. A replaceable sample gas

diffuser on the end of the detector provides sensor protection.

The microprocessor-based transmitter has a large LED display for

oxygen concentration and a 4-20 mA isolated output signal. It’s simple

to run a manual or automatic calibration check using known value gases

to ow a calibration gas through the detector’s calibration gas port —

without removing the detector from the process.

The Zircomat transmitter can monitor and analyze performance of up

to seven parameters online. Failure to meet any of these speciﬁcations

will activate alarm contact. The self-cleaning probe feature is program-

mable from the keypad, and activates a solenoid valve for blow-back

probe cleaning. You can use the interactive panel to customize response

time to process changes to suit existing combustion

control parameters.

Features

• Simple to install and maintain

• One detector ts all Zircomat

probes

• Detector removes for easy clean-

ing and repair; probe stays in

place

• Calibrates automatically

• Field selectable ranges

• Selectable memory hold feature

• Hi-Lo and self-diagnostic alarms

• Interactive message panel

• Isolated 4-20 mA output signal

• Extractive sample cell available

Stack Gas In

Stack

Wall

Detector

Probe Stack Gas Out

Speciﬁcations

Sensor: Zirconia oxide

Measurement Range: 0-2%, Up to 50%

0.5% steps

Output Signal: 4-20 mA, linear isolated

Accuracy: ±2% of reading; Repeatability: ±0.5%

Response Time: Initial 0.1 sec./90% 7 sec; Warm Up Time: 5 minutes

Probe Materials: ZFK/ZTB: Steel, ZTA: Carbide, ZFK-ST: Mullite

Probe Flange: ZTB/ZFK/ZFK-ST: 4” 150#RF; ZTA: 2.5” 150#RF

Cable: 20 ft. Sealtite ﬂexible conduit, up to 1000 ft. optional

Air Requirement: Self-Cleaning Probe: 15 SCFM, 40-120 PSI; ZTA Probe Sample

Loop: 10-20 SCFH

ZTA Probe: Low temperature alarm below 100°C, volt; free 1A 115V contact

closure

Transmitter

Ambient Temperature: 0-130°F

High/Low Alarms: Rated N/O volt free 2A 250V

Contacts: Outputs: Rain resistant; Inputs: Autocal start/inhibit; Alarm: Failure

in service, maintenance blow down

Calibration: Manual or automatic

Output Signal Hold: Selectable, for self-cleaning or maintenance

Finish: Epoxy painted steel/SS

Mounting: Wall, panel, or 2” pipe mount

Options: Combustion efﬁciency, RS485 communication, remote calibration

unit with solenoids and ﬂow meter; Hazardous area transmitter

Selecting the Right Zircomat Analyzer System

Stack Gas and Combustion Efﬁciency Analyzers

Zircomat In-Situ Stack Gas Oxygen Analyzer

Fuel Type Gas or Oil Gas or Oil Coal, Oil, or Gas Coal, Oil, or Gas

Sample Gas Up to 1150°F Up to 2200°F Up to 2900°F Up to 1150°F

Available

Probe Lengths

12, 20, 30, 40, 60, 80,

100, 120, 140

20, 40 20, 30, 40, 60 12, 20, 30, 40, 60, 80,

100, 120, 140

Applications Utility/Industrial Power

Boilers, Process Heaters,

Marine Boilers, Drying

Furnaces, Steam Gener-

ators, Inert Gas Generators

Process Heaters, Steam

Generators, Power Boilers

Soaking Pits, Blast Furnaces,

Coke Ovens, Incinerators,

Glass Furnaces, Boiler

Fireboxes, Process Heaters,

Reheat Furnaces

Utility/Industrial Power

Boilers, Incinerators, Blast

Furnaces, Coke Ovens, Black

Liquor Boilers

Use Model... ZRM-ZFK ZRM-ZFK-ST ZRM-ZTA ZRM-ZTB

Prices Start at... $4796.00 $4996.00 $7216.00 $5073.00

Please issue all orders to: Cosa Instruments, c/o Lesman Instrument Company

Call Lesman for

help specifying the

right model for

your application.

Looking for COSA portable combustion

efciency analyzers? Call Lesman.

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

EFFICIENCY

ANALYZER

Portable Combustion Efﬁciency Analyzers

Testo 330-2 Industrial Combustion Analyzer

• MeasuresO2,CO,NO(CO2andNOxcalculated),temperature°F,pressure,

eciency,andexcessair

• Automaticsensorprotection(COdilutionto30,000ppm);Automatic

moistureprotection;includesvisualalarmandpumpshut-o

• Datalogs200measuringrecords,withaddressandsystemnumbers

• Infrared(IrDA)interfaceforworkingwithahandheldPDA,infraredprinter,

orlaptopPC,USBinterfaceforcongurationanddatauploads

Testo 330-2 Kit comes with 12" click-and-go probe, 7' hose, rechargeable Lithium Ion battery, charger with cord,

infrared printer with paper, carrying strap, standard case with foam insert, USB cable, software, and user manual.

$100.00

Daily

$250.00

Weekly

$700.00

Monthly

$3590.00

to Buy

Testo 335 Portable Flue Gas Analyzer $123.00

Daily

$410.00

Weekly

$1025.00

Monthly

$3795.00

to Buy

• MeasuresO2,CO,NOdraft,ow,velocity,mass,dierentialpressure

• AutomaticdilutionexpandsCOrangeto50000ppm,NOto6000ppm

• Pre-calibratedplug-and-playsensorseliminatetheneedforcalibrationgas

inallbutthemostdemandingapplications

• Dataloggingforuptotwohours

• Infraredinterfaceforprinter,handheldPDA,orlaptopPC

Testo 335 NOx Kit comes with standard 12" probe, 7-foot Teon®-lined hose, Type K thermocouple, sensors for

NOx, O2, CO, and NO, infrared printer with 6 rolls of paper, power adapter with Lithium Ion battery, extra battery and

charger, 10-pack of lters, Easy Emission software, USB cable, and standard case with foam insert.

866-RENT-EHS

(866)736-8347

Testo 350-XL Portable Emissions Analyzer Kit

• SensorsforO2,CO,NO,NO2(NOx),SO2

• Temperature-controlledsensorsextendtestingrange

• SampleconditioningwithPeltiergaschillerandwaterremovalsystem

• Dilutionsystem40:1max.extendsCOrangetowellover100,000ppm

• Freshairpurge;Rapidset-upforeasymeasuring

• Largebacklitdisplayhasmultipagescroll-down,zoomfunction,andpull-

down menus

Testo 350-XL Engine Kit comes with gas sensors for CO, O2, NO, NO2 and SO2, control unit, particulate lters,

printer paper, carrying case and strap, transport case with sliding drawer, 12" engine probe with 7' hose and 12"

thermocouple probe with 16' cable, RS232 cable, software, and 16' remote control cable.

$200.00

Daily

$500.00

Weekly

$1500.00

Monthly

$8990.00

to Buy

$100.00

Daily

$200.00

Weekly

$700.00

Monthly

CA-Calc 6213 Combustion Analyzer for O2, CO, NO, SO2

• Real-time measurement seconds after power-up

• Calculates efciency, excess air, CO2, and emission rates, provides NO2 values

• Adjustable CO high limit pump shutdown; Adjustable O2 reference

• Data history sorted by system, or individual sample for printouts and report

generation

CA-Calc 6213 includes12”probewith9-footsamplingtube,Teon-linedsamplingprobe,watertrap,

carryingcase,ACadapter,fourCAlkalinebatteries,andoperationmanual.

Our partners at RAECO make it easy to get the combustion efﬁciency analysis equipment you need,

without a major outlay of cash. When you need portable combustion analyzers for short-term use, RAECO

Rents! has units for daily, weekly, or monthly rental. So you get the best monitor/analyzer for your needs,

just for the time you need it. No big purchase, no maintenance and upkeep costs. Call 866-736-8347 and

ask for Patricia or Rick.

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

V 10.2008

COMBUSTIBLE

GAS MONITORS

Portable Combustible Gas Detectors from

$40.00

Daily

$125.00

Weekly

$300.00

Monthly

$1239.00

to Buy

MSA Altair4 Multigas Detector with Pump Probe

• High-contrastLCDshowssimultaneousreadingsforLEL,CO,H2S,andO2

• Ultra-brightLEDs,95dBhorn,andvibratingalarmsforwarningsyoucan'tmiss!

• MotionAlertsignals"mandown"bydetectinglackofmotionfor30seconds,

InstantAlertletsyousoundamanualalarmtowarnothersofhazards

• 16-hourbatteryruntimewhenfullycharged

Altair 4 kit includes detector with universal pump probe, sensors for 0-100% Pentane LEL, 0-25% O2, 0-999 ppm CO,

and 0-200 ppm H2S, power supply/charger, MSA-Link software CD-ROM, JetEye infrared adapter with USB connector, user

manual, and carrying case.

Passport® PID II Personal Organic Vapor Monitor

• Range0–10,000ppmwithnodilutiontubeorinternaladjustment

• Peak,short-termexposure(STEL)andtime-weightedaverage(TWA)

• 69pre-programmedand10user-denedresponsefactors

• DigitaldisplayshowsnumericandbargraphdetailofVOCconcentration

• 5-secondaccesstochangebatterypack,cleanorreplacelamp

Passport PID II includes NiCad battery pack, 110 VAC charger, 10' coiled Teon sampling line, PVC case,

protective rubber boot, pistol grip with wrist strap, and 8" screw-on probe.

$50.00

Daily

$250.00

Weekly

$700.00

Monthly

Call for pricing on a

gently-used model

• SimultaneouslymonitorsanddisplaysreadingsforO2,CO,H2S,and%LEL

• Threelevelsofinstantaneousalarm,plustime-weightedaveragealarms

on toxic gases

• Basestationcombinesfunctionalityofdatainterfaceandbatterycharging

• Eventandtimeddatalogging

Impact Pro kit includes sensors for CO, O2, H2S, and LEL; integral pump and pump adapter, charger with

charging base, rechargeable NiMH batteries, belt clip, ow adapter, 30' sample tube with inline adapter, ball oat,

base station PC link cable, software CD, quick-start guide, user manual, and carrying case.

Honeywell Impact Pro Multigas Monitor $40.00

Daily

$100.00

Weekly

$350.00

Monthly

$1304.00

to Buy

Honeywell Enforcer Calibrator for Impact Pro $15.00

Daily

$42.00

Weekly

$105.00

Monthly

$268.00

to Buy

• CalibratesHoneywellImpactPromultigasmonitorsttedwithoxygen,

ammable,carbonmonoxide,andhydrogensuldesensors

• RecordscalibrationresultsforprintingviaPCsoftware

• Built-inindicatortellsyouwhengascylinderneedsreplacing

• RecognizesImpactProimmediately,andcompletestestsandcalibration

in less than two minutes

Enforcer kit includes one multigas cylinder, wall-mount plate, and carrying case.

Choosing the Right Combustible Gas Detector for Your Application

Alarms Data Infrared Intrinsically Weekly

Product Visible Audible Vibrating STEL TWA Logging Port Safe Rental Price

HoneywellImpactPro ✔ ✔ ✔ ✔ ✔ 100.00

MSAAltair4 ✔ ✔ ✔ ✔ ✔ 125.00

MSAOrion ✔ ✔ ✔ ✔ ✔ ✔ 100.00

MSASolaris ✔ ✔ ✔ ✔ ✔ ✔ ✔ 125.00

MSAPassportPIDII ✔ ✔ ✔ ✔ ✔ 250.00

MSASirius ✔ ✔ ✔ ✔ ✔ 350.00

866-RENT-EHS

(866)736-8347

Save

20% off the

listed purchase price

on all MSA portables

when you buy before

12/31/2008!

V 10.2008

Illinois, Indiana, and Iowa

Phone: 800-953-7626 • 630-595-8400

Fax: 630-595-2386

Wisconsin, and Upper Peninsula Michigan

Phone: 800-837-1700 • 262-923-1790

Fax: 262-923-1797

Lesman Instrument Company

www.lesman.com

sales@lesman.com

The new RAECO Rents instrumentation

catalog is now available! Get yours FREE!

COMBUSTIBLE

GAS MONITORS

Orion™ Multigas Detector for LEL, CO, O2, and H2S

• One-buttoncalibrationsimpliescalibration,reducestrainingneeds

• Largeeasy-to-readdisplayforlowlightconditionsandmanyangles

• Long-lifedurablesensorsprovideupto50timesthesiliconepoisontolerance

• Zoomexpandsanyportionofagraphtofocusonanactivitydetail

• Softwaretoviewgasessimultaneouslyorfocusononeatatime

• Resistanttowater/dust;Nyloncaseforuseintoughenvironments

• Long-lifebatteryprovidesupto20hoursinthenon-pumpmode

Orion kit includes pump module, sensors for %LEL pentane, O2, CO, and H2S, 10' sample line, 1' probe, NiMH battery

pack, battery charger and cord, screwdriver, lters, hose adapter, manual, FiveStar™ Link software, carrying case, orange

Cordura jacket, and integral PulseCheck pump.

$50.00

Daily

$100.00

Weekly

$350.00

Monthly

$2123.00

to Buy

Solaris Multigas Detector for Monitoring Combustible Gases

• 1-,2-,3-,and4-gascongurationsforO2,H2S,CO,andcombustibles

• 100+dBhorn,super-brightLED,andvibratingalarm

• Large,easy-to-readalphanumericdigitaldisplay

• Lightweightunit;IP65ratedforsuperiorprotectionagainstliquid/dustingress

• One-buttoncalibrationwithbuilt-inlogic

• LithiumIonbatterywithruntimeof14+hours

Kit includes detector, battery charger, charging station, calibration cap, tubing, two male ttings, infrared reader, Solaris

software, quick reference card and manual on CD.

$40.00

Daily

$125.00

Weekly

$300.00

Monthly

$1409.00

to Buy

Sirius Multigas Detector for VOCs and Combustible Gases

$100.00

Daily

$350.00

Weekly

$750.00

Monthly

$3617.00

to Buy

• OneunitsimultaneouslymonitorsVOCswithlowvaporpressuresandmeasures

forcombustible,toxic,andoxygen-decientatmospheres

• PIDsensorincludeshumidityresistance,stablezeroreadings,andfastresponse

and clear times

• MultidirectionalvisibleLEDalarmandaudiblehornalarm

• Displayshowscombustiblegas,CO,H2S,O2,%LEL,andVOCswiththeir

characternames,alsoincludesbatterylifeindicator

• Interchangeablebatterypackskeepinstrumentrunning24x7

Sirius kit includes PID lamp, 0-100% LEL, H2S, CO, and O2 sensors, power supply, AC adapter and battery charging unit,

sample line and probe, carrying case, orange Cordura jacket with harness, and instructions.

• 64pagesofinstrumentationforindustrialhygiene,safety,and

environmentalapplications

• Rentalsavailableonadaily,weekly,ormonthlybasis

• Allparts,accessories,andsoftwareavailable

• Automatic5%rentalfeediscountwhenyourentonlineatwww.raeco.com

Visit www.raeco.com to request a print catalog or download the free PDF.

Save

20% off the

listed purchase price

on all MSA portables

when you buy before

12/31/2008!

WE’RE WAITING!

When you need Honeywell Burner

Controls products fast, call Lesman.

We stock a wide variety of popular items

that can ship to you the same day.

135 Bernice Drive • Bensenville, IL 60106-3366

Order by phone, fax, or e-mail for fast, friendly service.

Prices are current as of publication date, and are subject to change without

notice. Visit www.lesman.com/catupdates.html for catalog updates.

Due to contractual agreements with our manufacturers, some items in

this catalog may not be available in all geographic areas or markets.

Use Our Hotlines! Bensenville IL Butler WI

Toll Free 800-953-7626 800-837-1700

Local Phone 630-595-8400 262-923-1790

Fax 630-595-2386 262-923-1797

E-Mail sales@lesman.com wisales@lesman.com

See More at

Lesman.com

• Fullspecsandmanualsonourburnerand

boiler controls product offering

• Lotsofarticles,technicaltips,and

application success stories

• Accesstopodcastsandvideotraining

• Allavailable24hoursaday,7daysaweek!

Need a Hand?

Our applications specialists are factory-trained to

help you through the installation and maintenance

headaches of typical ﬂame safety systems.

Lesman It's On Fire Combustion Instrumentation Catalog B1048 Cat2008

Navigation menu

Versions of this User Manual:

Views

Navigation