Form Number VL1182 Interceptor 1000
User Manual: Interceptor 1000
Open the PDF directly: View PDF 
.
Page Count: 1
Interceptor 1000
Camera Interface System for VideoLabs’ PTZCam™
VideoLabs’ Interceptor 1000 is a camera
control interface that allows the
VideoLabs’ PTZCam to be used in place of
the Sony® EVI Series cameras.
The Interceptor 1000 translates the VISCA
instruction set, which is stored in many
®
5960 Golden Hills Drive
Minneapolis, MN 55416-1040
763.542.0061 • 800.467.7157
www.videolabs.com
©2002 E.mergent, Inc. VideoLabs is a division of E.mergent, Inc. All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and
pricing subject to change. VideoLabs and VideoLabs logo design are registered trademarks of E.mergent, Inc. PTZCam is a trademark of E.mergent, Inc. All other trademarks are
property of their respective owners. Form Number VL1182/3-02
®
Technical Features
• Emulation of VISCA Instruction Set: up/down,
left/right, zoom in/zoom out, preset store,
preset recall, absolute position, power on/off,
among other features.
• IR decoding of the Polycom IR remote control.
Included Accessories
• 8’ custom serial cable
• Power supply
Videoconferencing setup
Presentation/training setup
M
M
M
M
INTERCEPTOR
1000
CONTROL
CAMERA
CAMERA
RS232
CODEC
SERIAL
CABLE
INCLUDED
CABLE
M
PTZCam
VIDEO
M
M
M
M
INCLUDED
CABLE
PTZCam
M
M
VIDEO
INTERCEPTOR
1000
CAMERA
CODEC
FAR END
POLYCOM
REMOTE
Technical Specifications
Serial Communication Data Rate: 9600, 8N1
Input RS 232
Output RS 232
Weight 0.38lbs/0.18kg
Dimensions
Depth 2.25”/5.71cm
Width 5.5”/13.97cm
Height 1.26”/3.18cm
Power Supply 12 VDC, 750mA
videoconferencing systems, enabling near and far end control of the VideoLabs’
PTZCam. The Interceptor 1000 can also receive IR commands directly from a
Polycom® remote.
