ZCPR3_and_Z System_Commands ZCPR3 And Z System Commands
ZCPR3_and_Z-System_Commands ZCPR3_and_Z-System_Commands
User Manual: ZCPR3_and_Z-System_Commands
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
""y W" Z-System 0 M M A N D S provided in the ZCPR3 System are used in utilities The more important conjunction ones are briefly described here, but the online gives details on these and all remaining. facility HELP.COM full and After Z-System the HLP files on the current disk put is installed and Where type HELP ZCPR3 or ZRDOSI assist is for full help menu. and usage appropriate, command obtained by typingand with Z—Com. HELP AC option, ALIAS 0 O All programs syntax 0 C AC while The copies setting ALIAS is // . from one location to another with verification files archive attribute. Only changed files are copied. file used to create an Alias file and to display its is utility expanded and resolved (with essentially a An Alias contents. text script, is parameter passing) when the Alias program is run. Very complex command lines, complete with Flow Control (IF), can be included within an Alias. CD CD permits going from one directory to another, simultaneously running an environmental file (ST.COM) to establish the desired conditions in a directory area. CD may require a password to move to a new directory. CLEANDIR Removes Ck-allocated references to files in the disk directory track area, sorts the existing files in ascending or descending alpha order and packs UNERASE. Used often nearly guarantees successful the names together. COMP Compare two files displaying byte for byte match and difference. CPSEL Selects one of two consoles and one of four printers known to system. Line and page length, and whether forrrt-feeds are used are selected. CRC Runs a Cyclic Redundancy Check on specified files, optionally creating a file of the values. Useful to make sure files are identical, DIR Sorted current or declared directory files with sizes and disk space used and remaining are displayed on console with this command. DFA Display file attributes: read-only, read-write, archive, wheel byte write-protected, permitted. etc. Wild card file declaration The ELSE command ELSE is FCP-resident and toggles the Flow State. If the current IF condition is TRUE, ELSE toggles it to FALSE, and vice-versa. ERA The ERA to remove (de-allocate) files from disks. utility theis RCPusedsegment CCP module. resident either is in or in the ZCPR3 It ERASE The ERASE ERA. the of transient counterpart utility is It is much more powerful than ERA, containim many more options and features. ERRORn One of four error handlers may be dynamically installed by entering ERROR2 command name. their is screen oriented. Recover front a non-executable command handled gracefully. is ERRORX The current error handler is disengaged with this command. FI FI is an FCP-resident command which terminates the current IF. FI is the same as ENDIF in concept (there is no ENDIF command in Z System). The HELP command HELP Typiñ9 HELP provides full oMine documentation. ZCPR3 or ZRDOSI brings a menu of commands to peruse, covering all aspects of Z ZCPR3: The Manual System operation. is used for further command information. IF IF is an FCP-resident command which tests a condition and sets the Flow Control State to True or False. If the Flow Control State is False, only FCP-resident commands are executed with all other commands skipped. MKDIR Named directories Any Disk or User Area can are created with MKDIR. be given an An name. access password is optionally up-to-eight-character permitted with each named directory. MCOPY MCOPY an easy way copies files to and from directories. It provides (CP from an RCP also copies and optionally renames to back-up files. files.) MENU MENU The MENU command Subsystem under ZCPR3. MNU menus are runs the created with your editor following rules detailed in the HELP file system. -A r " PAGE The More PAGE command text fi1e,c) to CRT console screen for operator viewing. than one file may be viewed sequentially, skipped, with screen wordwrap line length exceeds screen width. The PATH command PATH allows you to display and change your commandsearch path dynamically. The PRINT corrtrrtand provides PRINT text files on the full page printing of Page CPSEL selects the printer Ííeading and printer. characteristics. numbering, and sequential file printing, with wordwrap, are available. PROTECT Files are declared Read-Only, System, Archive, or Read-Write, singularly or in wild-card file groups, with PROTECT. REN REN or with the more Renaming f: iles is performed with resident powerful transient RENAME. PWD The PWD command prints the narrtes of available Working Directories. SAK Strike Any Key, used in command lines to suspend execution for a specified time or cancel next operation, alert operator with console bell, cancel, or proceed after delay, if operator not available. SFA Set file attributes: read-write, read-only, archive, wheel byte write-protected, etc. Wild card file declaration permitted. SETFILE Allows declaring up to four syc7tem file names to be used with shell programs, MENU, VMENU, SAK, ALIAS, etc. SHOW indicates system files active. SHOW SHOW prints a rnenu of options to permit recalling the status of the ZCPR3 environment. command Buffer address locations, line length, system cpu and maximum speed, drive user areas permitted, all on 11 screens of E SHOW information. installs Show as an error handler. SHCTRL Shell Control permits getting out of a shell, popping the stack. erased The UNERASE command UNERASE permits recovering accidentally files. be made Recovery must before starting any further disk drive activities. VFILER VFILER is Z System screen-oriented file manipulation utility. Permits pointing to files in directory and performing many operations on them: compute sizes, view, print, copy, delete, unsqueeze, or tag (wild cards commands Ten macro allowed) for group (mass) action. from custom CMD menus. VMENU The VMENU command is used to run the VMENU Subsystem of ZCPR3. command VMENU uses *.VMN files for full menu control of the environment. Portions of a directory are listed at top of the menu screen. WHEEL WHEEL permits changing the system from secure to unsecure. If secure, passwords are needed to access established directories and certain MKDIR, ALIAS, may not be used: etc. The preset password is SYSTEM. utilities The XD command XI) is one of the three transient file directory display has features between ZCPR3. DIR and XDIR. provided with utilities It The XDIR command XDIR is the most powerful of the three supplied file directory listing programs. sends if Z - C O M J N S T A L L A T I O 0 N of Z-Com master disks and put masters away. of your CP/M system on working Z-Com disk#1, using SYSGEN supplied with your computer hardware. Place Z-Com disk #1 in Drive A. As an alternate way, copy all the Z files of disk #1 onto a CP/M disk in Drive A. 3. Type SUB ZCCOM and watch installation automatically occur. It takes less than two minutes. Near end of installation, program TCSELECT to select your (terminal capability select) is invoked and you are asked terminal or computer from the menus. After selection, Z is up and running. Place HLP files where it's convenient to access them. Z exit 4. After installation, Z is activated simply by typing ZC . //2.) (Be read command ZCX READ.ME Z-Con disk on the . sure to is file l. 2. 0 Make a copy Put a copy 0 : r" "i O Z C P R 3 C O MMA N D S commands are briefly described here. The online HELP The ZCPR3: gives on these and remaining commands. facility full details Z3 Manual is the bible for command descriptions. the After installing system, put HELP.COM and the HLP files on the current disk or along the file search path and type HELP ZCPR3 for full help menu. At the command line, immediate by typing help syntax is available (if assist information is appropriate) // . More frequently used ALIAS The ALIAS An Alias pass: itng) when is used utility essentially to create an Alias file and to display its and resolved (with a text script, expanded contents. is the Alias program is run. Very complex command lines, parameter complete with Flow Control (IF), can be included within an Alias. CD The CD command permits 9oing from one directory to another, simul(ST.COM) taneously runnim an environmental to establish the desired file CD a may require apassword to move to a new conditions in directory area. directory. CLEANDIR Removes all de-allocated references to files in the disk directory trackarea, sorts the existing files inascending or descending alpha order and Used packs the names together. often nearly guarantees successful UNERASE. CCNIENT D entered all text typed at keyboard is ignored by operating Useful to output text to printer while not having the computer system. attempt to act on it. Special prompt provided. CPSEL Selects one of two consoles and one of four printers known to system. Line and page length, and whether form-feeds are used are selected. CRC Runs a Cyclic Redundancy Check on specified files, optionally of the values. a creating Useful to make sure files are identical. file DIFF by Determines the line line different between two files. DIR Current or declared directory files with file sizes and disk space used and remaining are displayed sorted on the console with this command. DU3 Disk Utility provides screen-oriented direct disk editor full Four screens of command features. information are available by typing "?". ECHO Text entered at the command line is typed to screen without the from Aliases and operating system acting on it. Useful to display messages commands command between multiple line. of a multiple The ELSE command ELSE is FCP-resident and toggles the Flow State. If the current condition is TRUE, ELSE toggles to FALSE, and vice-versa. ERA The ERA (de-all.ocate) files from disks. utility theis RCPused to remove ZCPR3 CP. the resident either or in is in It The ERASE ERASE is the transient counterpart of ERA. It is much utility ERA, more powerful than containing many more options and features. ERRORn One of four error handlers may be dynamically installed by entering ERROR2 command name. their is screen oriented. Recovery from a noncommand executable is handled efficiently and gracefu1ly. ERRORX The current error handler is disengaged with this command. FI FI is an FCP-resident command which terminates the current IF. FI is the same as ENDIF in concept (there is no ENDIF command in ZCPR3). FINDF Searches for declared files in all user areas or disks in system. Wild card (? and *) and multiple file names permitted. HELP The HELP command Ty?ing HELP provides full online documentation. ZCPR3 commands brings a menu of to peruse, covering all aspects of ZCPR3 ZCF'R3: The Manual System operation. is used for further command information. command which tests a condition and sets the IF IF is an FCP-resident True Flow Control State to or False. If the Flow Control State is False, only Once ' it D · _ r L FCP-resident executed and all other commands are skipped. Any Disk or User Area can are created with MKDIR. An access password is optionally an up-to-eight-character name. permitted with each named directory. MCOPY MCOPY copies files to and from directories. provides an easy way It RCP (CP and back-up renames from an also copies optionally to files.) files. MENU MNU MENU The MENU command ZCPR3. Subsystem menus are the under runs created with your editor following rules detailed in the HELP file system. MU3 Memory provides Utility direct local memory (RAM) editim. Useful changes observe immediate selected to to areas of memory. NOTE Similar to COMMENT, but without special prompt and active for only one line. Text typed is not acted upon by computer. The PAGE command PAGE sends text files to CRT console screen for operator More than one be viewed sequentially, viewing. may skipped, with screen file exceeds wordwrap length width. line screen The PATH command PATH allows you to display and change your command" search path dynamically. PRINT The PRINT command provides full page printing of text files on the CPSEL selects the printer Page heading and printer. characteristics. numbering, and sequential file printing, with wordwrap, are available. PROTECT Files are declared Read-Only, System, Archive, or Read-Write, singu1ar1y or in wild-card file groups, with PROTECT. QUIET Enteriíig QUIET reduces text output from most utility programs to minimum required for operation. REN REN or with the more Renaming files is performed with resident powerful transient RENAME. The PWD command IND prints the names of available Working Directories. SAK Any used in command Key, Strike lines to suspend execution for a specified time or cancel next operation, alert operator with console bell and proceed delay, prompt, or operator not available. after SETFILE Allows declaring up to four system file names to be used with shell programs, MENU, VMENU, SAK, ALIAS, etc. SHOW indicates system files active. SHOW The SHOW commandprints amenuof options to permit recalling the ZCPR3 environment. of the Buffer address locations, command line status maximum length, speed, system cpu drive and user areas permitted, all on SHOW E installs Show as an error handler. eleven screens of information. SHCTRL Shell Control permits getting out of a shell, popping the stack. The UNERASE command UNERASE erased files. permits recovering accidentally be made must drive disk any before Recovery activities. further starting The VFILER VFILER is the ZCPR3 screen-oriented file manipulation allows you to point to a file in your directory and perform a facility. number of operations on it, such as compute its size, view it, print it, copy or tag for group operations. it, delete Theit, VMENU command is used to run the VMENU Subsystem of ZCPR3. command VMENU uses *.VMN control of the environment. files for full ofmenu menu screen. the Portions of a directory at top are listed The WHEEL WHEEL command permits chaíiging the system from secure to passwords are needed to access established directories unsecure. If secure, may and certain not be used: ALIAS, MKDIR, etc. The preset password utilities is the word: SYSTEM. The XI) command XD is one of the three transient file directory display ZCPR3. has features between DIR and XDIR. with provided utilities It The XDIR command XDIR is the most powerful of the three supplied file directory 1istiñ9 programs; to printer, to disk file for comparisons, sorts vertically or horizontally, shows files is all user areas, etc. MKDIR be given commands are Named directories 0 if ' if It 0 utility ©1984,Eche|on,|nc. D "y r 0 Z-System 0 O MMAN D S Frequently used cornrriands are briefly described here. The online HELP The ZCPR3: on gives these and remaining commands. details facility full Manual is the bible for command descriptions. After installing Z-System, put and the HLP HELP.COM on the current disk or along the file search path files and type HELP ZCPRJ or HELP ZRDOSI At the command line, for help menus. and immediate help syntax usage information is available is assist (if appropriate) by typing // . AC option, ALIAS /" C AC while The copies setting ALIAS from one location to another with verification files archive Only changed files are copied. file is used attribute. an Alias file and to display its to create utilitv is essentially a text script, expanded and resolved (with An Alias contents. when the Alías program Very complex command passing) lines, is run. parameter coníplete with Flow Control {IFJ, can be iucluded within an Alias. CD CD permits going front one directory to another, simultaneously running an environmental tile (ST.COM) to estÁjj ish the desired conditions in CD a directory may require a password to move to a new directory. area. CLEANDIR Renioves de-allocated references to files in the disk directory track area, sorts the existing files in ascending or descending alpha order and packs Used often nearly guarantees successful UNERASE. the nannies together. COMMENT Once entered all text typed at keyboard is ignored by operating Useful to output t.ext to printer while not having the computer system. attempt to act on it. Special prompt provided. COMP Compare two files displayiñ9 byte-for-byte match and difference. screen display, both hex and ASCJ T, eases comparison. Split CPSEL Selects one of two consoles and one of four printers known to system. Line and page lemth, and whether form-feeds are used are selected. CRC Runs Redundancy Check Oil specified files, optionally a Cyclic creating a file of the values. Useful to make sure files are identical. DIFF Determines line by line different between two files. DIR Sorted current or declared directory sizes and disk space files with used and remaining command, by on displayed console with are this file name or naíne, one. type . Displays directory DFA Display file attributes: read-only, read-write, archive, wheel byte write-protected, Wild card declaration permitted. etc. file screen-oriented DU3 Disk Utility provides direct disk editor full Four screens of command features. "information are available by typing "?". The ELSE command ELSE the Flow State. If the is FCP-resident and toggles current IF condition is TRUE, ELSE toggles to FALSE, and vice-versa. The ERA ERA to remove (de-allocate) files from disks. utility theis RCPused segment CCP module. resident in either or in the ZCPR3 It is ECHO command Text entered at the line is typed to screen without the operating system acting on it. Useful to display messages f rom Aliases and between multiple commands of a multiple command line. The ERASE ERASE utility is the transient counterpart of ERA. It is more powerful than ERA, containing many more options and features. ERRORn Four error handlers dynamically installed by entering their command command ERROR2 is screen oriented; recover from a non-executable name. in command and multiple lines is handled gracefully quickly. The current ERRORX with this command. error handler is disengaged FI FI is an FCP-resident command which terminates the current IF. FI is the sanie as ENDIF in concept (there is no ENDIF command andin Z-System). FINDF Searches for declared files in all user areas disks in system. Wild card (? and t') and multiple file names permitted. GOTO Unconditional branch in ZEX files; used to create loops in flow control testing. The HELP command HELP Typing HELP ZCPR3 provides oMine documentation. ZRDOSI ot" commands a brings covering menu aspects of Zto peruse, or all ZCPR3: The Manual command System used information. further operation. for is IF IF is an FCP-resident command which tests a condition and sets the Flow Control State to True or False. If the Flow Control State is False, only FCP-resident commands are executed with all other commands skipped. if it 0 -A T r MKDIR be given Narned an directories are created with MKDIR. Any Disk or User Area can up-to-eight-character name. An access password is optionally permitted with each named directory. an easy way copies files to and from directories. It provides (CP from an back-up renames also copies and optionally to files. files.) The command ZCPR3. Subsystem MCOPY MCOPY RCP MENU MNU menus are under runs the HELP created with your editor following detailed the rules in system. file MU3 Memory provides direct local memory (RAM) edit: Íng. Useful Utility changes tcj observe imnediate to selected areas of memory. NOTE Similar to COMMENT, but without special prompt and active for only one line. Text typed is not acted upon by computer. PAGE The PAGE command sends text files to CRT console screen for operator be viewed ,qequentially, More than one viewing. may skipped, with screen file wordwrap line length exceeds screen width. PATH The PATH command allows you to display and change your commandsearch path dynamically. PRINT The PRINT command provides full page printing of text files on the CPSEL selects the printer Page heading and printer. characteristics. number irig, and sequential available. with wordwrap, are file printing, System, or Read,-Write, F PROTECT Lies are declared Read-Only, singularly or in wild-card groups, with PROTECT. file QUIET Entering QUIET reduces text output from most utility programs to íninimim required for operation. REN REN or wi-th the more Renaming files is performed with resident powerful transient RENAME. The PWD ccmmand pm prints the names of available Working Directories. SAK Any used in command Key, Strike lines to suspend execution for a specified time or cancel next operat.ion, alert operator with console bell, cancel, or operator not available proceed after delay. SFA Set file attributes: read-write, read-only, archive, wheel byte write-protected, wild card file declaration permitted. etc. SETFILE Allows declaring up to four systen file names to be used with shell MENU, VMENU, SAK, ALIAS, etc. SHOW indicates system files active. programs, SHOW SHOW recalling the status of the prints a menu of options to permit command ZCPR3 environment. Buffer address locations, line length, system cpu 1 speed, maximum screens of areas permitted, all o ri i drive and user Show SHOW information. as an error handler. E installs ? SH Model shell program ready-to-use; for internal commandsand are: SHEXIT help, SHCMT for comment for entry, SHECHO for message text echo, the shell. exiting SHCTRL Shell Control permits getting out of a shell, popping the stack. erased The UNERASE command UNERASE permits recovering accidentally files. Recovery must be made before starting any further disk drive activities. VFILER VFILER is Z-System screen-oriented file manipulation utility. Permits pointing to files in directory and performing many operations on them: compute sizes, view, print, copy, delete, unsqueeze, or tag (wild cards Ten macro commands allowed) for group (mass) processing. front custom CMD CMD menus, possible. directory different per VMENU The VMENU command is used to run the VMENU Subsystem of ZCPR3. VMENU uses *.VMN command menu control of the environment. files forat full Portions of a directory of the menu screen. top are listed WHEEL WHEEL permits If changing the system from secure to unsecure. and certain secure, passwords are needed to access established directories ALIAS, MKDIR, may not be used: etc. The preset password is SYSTEM. utilities The XD command XI) the three transient file directory display is one of has provided with ZCPR3. features between DIR and XDIR. utilities It XDIR The XDTR command is the most powerful of the three sulgp1ied file directory shows all files in all directories, listing programs. Optionally by sorted to console, printer, vertically Negate or horizontally file nante orto type, buffer wild-card search and directory or file. for directory file comparisons are unique features. XIF Exit (terminate) all pending conditional if's in flow control testing. Useful in ZEX GOTO loops. MENU MENU 0 if if ©1984, Echelon, 0 0 Inc. A "y r Z 0 C P R 3 C O M M A N D S All programs and utilities provided in the ZCPR3 System are used in The more conjunction with Z3—Dot—Com. important ones are briefly described here, but the online HELP facility gives full details on these and all remaining. After the Z3 system is installed put HELP.COM and the HLP files on the current disk and type HELP ZCPR3 for the full help menu. Immediate syntax help is given by typing //, where assist information is appropriate. The ALIAS An Alias ALIAS to create an Alias file and to display its and resolved (with contents. text script, expanded is when Very passing) the Alias program is run. complex command lines, parameter complete with Flow Control (IF), can be included within an Alias. CD The CD command permits going from one directory to another, simul(ST.COM) taneously running an environmental to establish the desired file conditions in a directory area. CD may require a password to move to a new directory. CLEANDIR is used utility essentially all a references to files in the disk directory files in ascending or descending alpha order Used of'ten nearly guarantees successful UNERASE. the names together. CPSEL of two consoles and one of four printers known to one Selects and page Line lerigth, and whether form-feeds are used are selected. system. CRC Runs a Cyclic Redundancy Check on specified files, optionally make creating a file of the values. Useful to sure files are identical. DIR Current or declared directory files with file sizes and disk space used and remaining are displayed on the console with this command. The ELSE command ELSE and toggles the Flow State. If the is FCP-resident TRUE, and vice-versa. ELSE FALSE, toggles current condition is to The ERA ERA used to remove (de-allocate) files from disks. is RCP resident either the is in or in the ZCPR3 CP. It The ERASE ERASE is the transient counterpart of ERA. It is much utility ERA, more powerful than containiñ9 many more options and features. ERRORn One of four error handlers may be dynamically installed by entering ERROR2 command name. their is screen oriented. Recover from a non-executable command is handled gracefully. ERRORX The current error handler is disengaged with this command. FI FI is an FCP-resident command which terminates the current IF. FI is the same as ENDIF in concept (there is no ENDIF commµíd in ZCPR3). The HELP command HELP Typing HELP provides full online documentation. ZCPR3 brings a menu of commands covering aspects of ZCPR3 to peruse, all command used for further System ZCPR3: The Manual information. operation. is IF IF is an FCP-resident command which tests a condition and sets the Flow Control State to True or False. If the Flow Control State is False, only FCP-resident commands are executed and all other commands are skipped. MKDIR Named directories are created with MKDIR. Any Disk or User Area can be given an up-to-eight-character An access password is optionally name. permitted with each named directory. MCOPY MCOPY copies files to and from directories. provides an easy way It RCP (CP and renames back-up copies optionally an from also to files.) files. MENU MNU MENU The MENU command ZCPR3. Subsystem menus are the under runs created with your editor following rules detailed in the HELP file system. The PAGE command PAGE sends text files to CRT console screen for operator More than one skipped, with screen may be viewed sequentially, viewing. file exceeds wordwrap length width. line screen Removes deallocated track area, sorts the existing and packs 0 0 utility it if -A _"y r L- The PATH PATH command allows display to you search path dynamically. PRINT printer. numbering, The PRINT command provides CPSEL the and sequential selects change your command- printing of text files orí the Page heading and printer characteristics. printing, with wordwrap, are available. file full and page Files are declared Read-Only, System, Archive, or Read-Write, singularly or in wild-card file groups, with PROTECT. REN REN or with the more Renaming files is performed with resident PROTECT powerful transient ~ The PWD D RENAME. command Any Key, prints the names of available Working Directories. used in command Strike lines to suspend execution for a specified time or cancel next operation, alert operator with console bell, cancel, or proceed after delay, operator not available. if SAK Allows declaring up to four system names to be used with shell SHOW MENU, VMENU, SAK, ALIAS, indicates active. etc. system programs, SHOW The SHOW command a menuof options the to permit command of the ZCPR3 environment. address length, system cpu speed, maximum on anduser areas SHOW E Show of information. handler. as an screens error SHCTRL Shell Control permits getting out of a popping the stack. UNERASE The UNERASE command erased permits recovering accidentally be made before Recovery must any disk drive VFILER The VFILER the ZCPR3 screen-oriented manipulation and allows you to a perform a to your number such as compute of operations on copy size, view SETFILE file prints status Buffer drive installs starting utility is point facility. It it, delete Theit, files recaljing locations, permitted, all shell, further file in activities. line li files. file it, print it, directory its it, for group operations. VMENU command is used to run the VMENU Subsystem of ZCPR3. VMENU uses *.VMN command control of the environment. files for full ofmenu Portions of a directory menu screen. the are listed at top or tag VMENU The WHEEL permits changing the system from secure to needed passwords to access established directories unsecure. are If secure, and certain be used: ALIAS, MKDIR, may not etc. The preset password utilities is WHEEL command SYSTEM. XI) The utilities XDIR provided directory listing programs. XI) command The XDIR Z 3 I. Make a copy of 0 one of the three transient directory display ZCPR3. has features between DIR and XDIR. command the most powerful of the three supplied is with - D O T Z3-Dot-Com is - file It C O file M I master disk N S T A L L A T and put master I O N away. 2. Put a copy of your CP/M system on the working disk using SYSGEN supplied with your computer hardware. Place the disk in Drive A. As an alternate way, copy all the ZCPR3 files onto a CP/M disk in Drive A. 3. Type SUB Z3COM and watch installation automatically occur. It takes a the program Near the end of installation, over three minutes. TCSELECT (terminal capability select) is invoked and you are asked to select your terminal from the menus. After selection, ZCPR3 is up and running. where HLP Place files it's convenient to access them. little 4. After installation, ZCPR3 is activated simply exjt command is Z3X . by typing Z3 . ZCPR3 "
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-21:37:19 Format : application/pdf Creator : Description : Title : Create Date : 2016:06:15 18:28:26-05:00 Creator Tool : ChronoScan Modify Date : 2016:06:21 10:24:03-07:00 Metadata Date : 2016:06:21 10:24:03-07:00 Keywords : Producer : ChronoScan (http://www.chronoscan.org) Document ID : uuid:58aac63a-0a7d-e54d-bfe1-049ade60e91a Instance ID : uuid:6b83f37b-28d4-bc4b-9ceb-69521cb64cad Page Layout : SinglePage Page Mode : UseOutlines Page Count : 8 PDF Version : 1.4 Author : Subject :EXIF Metadata provided by EXIF.tools