R7000 Uninterruptible Power System (UPS) View Enhanced PDU C04154371
User Manual: Power View Enhanced PDU
Open the PDF directly: View PDF .
Page Count: 11
Download | |
Open PDF In Browser | View PDF |
QuickSpecs R7000 Uninterruptible Power System (UPS) Overview The innovative Minimally Switched Technology used in the new HP R7000 UPS improves the performance over traditional lineinteractive UPS designs while reducing the cost, weight, and size of traditional double-conversion online UPS designs. The digital signal processing (DSP) enables complete digital control of the UPS resulting in increased power conditioning, lower system cost, and enhanced user interface interactivity. DSP technology enables the practical implementation of sophisticated UPS topologies and controls. The DSP can simultaneously control multiple power converters to optimize system efficiency and other performance characteristics such as: enhanced battery management for extended battery life, and improved output voltage regulation. The result is a higher performance UPS in smaller, lighter, more reliable designs-an advantage for space-constrained equipment racks and cost conscious, co-located data center applications. Front View: 1. Escape Button 2. Scroll up button 3. Scroll down button 4. 5. Enter/Select button Power button Rear View: 1. Load segment 1 circuit breaker (controls L6-30R receptacle for NA/JPN, Item 3) 2. Load segment 2 circuit breaker (controls L6-30R receptacle for NA/JPN, Item 15) 3. Large output NEMA L6-30R receptacle (NA/JPN) or IEC60309 32A receptacle on short cords (INTL) associated with load segment 1 4. Cord retention clip attachment locations 5. Load segment 1 circuit breaker (controls the C19 receptacles, but does not control the large output receptacle) 6. 3 x IEC C19 receptacles on load segment 1 7. HP UPS Network Module 8. Input power line cord with NEMA CS8265C plug (NA/JPN) or IEC-309-32A plug (INTL) 9. Ground bonding screw 10. Serial communications port 11. USB communications port 12. REPO port 13. 3 x IEC C19 receptacles on load segment 2 DA - 14110 Worldwide — Version 3 — October 7, 2011 Page 1 QuickSpecs R7000 Uninterruptible Power System (UPS) Overview 14. 15. 16. 17. Load segment 2 circuit breaker (controls the C19 receptacles, but does not control the large output receptacle) Large output NEMA L6-30R receptacle (NA/JPN) or IEC60309 32A receptacle on short cords (INTL) associated with load segment 2 ERM communication port ERM connector for the large plug on the split ERM cable Models NOTE: #0D1 will appear after the part number on the sales order if HP factory integration is indicated. HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System Kit Contents AF462A AF463A HP UPS R7000 HP UPS Network Module Power Products Documentation CD Depth adjustable fixed rack mounting rails, mounting brackets, cord retention clips Communications cable Two 7xC13 Extension Bars DA - 14110 Worldwide — Version 3 — October 7, 2011 Page 2 QuickSpecs R7000 Uninterruptible Power System (UPS) Standard Features Key Features High power density with up to 72000VA /7200 Watts of power packed in just 3U rack space Greater system uptime with support for Extended Runtime Modules (ERM) Easy configuration through enhanced front panel display Enterprise-wide intelligent manageability with bundled UPS Network Module and HP Power Protector software More efficient voltage regulation with revolutionary technology Ultimate long-term battery reliability with HP Enhanced Battery Management Enhanced system flexibility with two independently controlled load segments Support for Remote Emergency Power Off (REPO) circuitry Easy serviceability through modular design Hot-Swappable Battery Backed by a three year warranty with the first year including parts and labor. HP's Pre-Failure warranty, and a $250,000 load protection guarantee*. (Certain restrictions and exclusions apply; *Load protection guarantee available in North America only.) Optional Extended Runtime Modules (ERM) increase batter runtime during a power failure 4U Power Packed Design Rated at unity power at 7200VA /7200W for the NA/Japan model, and 6500VA/6500W on the international model, the HP UPS R7000 packs more power in space-conserving rack-mount design, allowing you to support more critical equipment in your rack. Increase System Uptime with Extended Runtime Modules The Extended Runtime Modules are rack mounted battery modules that occupy 3U (5.25 inches) of rack space. The HP UPS R7000 supports up to four Extended Runtime Modules (ERM), which extend your overall battery runtime. Lower Cost of Ownership The HP UPS R7000 utilizes a the Digital Signal Processing industry-leading technology that continually with Innovative conditions and regulates power without using the battery, thereby increasing the life of the battery. The Technology output voltage is automatically regulated, based on the connected load and the input voltage. Investment Protection with HP UPS R7000 incorporates Enhanced Battery Management: an exclusive, patented technology that HP Enhanced Battery doubles battery service life, optimizes battery recharge time, and provides advance notice of pending Management battery failure. With Enhanced Battery Management, you can save 2-3 battery replacements over the life of the UPS saving hundreds of dollars giving you a lower total cost of ownership while still receiving the power protection for your critical equipment. Enhanced Flexibility Six C19 outlets, and two L6-30 outlet (2x 32A IEC on the International model) provide a wide range of connection options. Two included Extension Bars provide an addition 14 C13 outlets if needed. Adding additional HP PDU Extension Bars, AF500A, provides additional C13 outlets making the R7000 and extremely flexible UPS for all environments. Remotely Monitor UPSs on The installed UPS Network Module enables network administrators to remotely monitor UPSs and reboot the Network network devices. It provides SNMP functionality, including power event alerts, network power diagnostics, and remote UPS reboot and testing. Used in conjunction with HP Systems Insight Manager or other SNMP capable Network Management Software, power-related problems on the network are quickly discovered and remedied. DA - 14110 Worldwide — Version 3 — October 7, 2011 Page 3 QuickSpecs R7000 Uninterruptible Power System (UPS) Standard Features Easy Configuration via Enhanced Front Panel Display LCD system integrated into the front panel with five button controls (three buttons for UPS power control and one button under the front bezel for configuration) Independently Controllable Load Segments With two load segments, you have the flexibility to configure scheduled startups and shutdowns, in addition to independently control the separate load segments. Working in conjunction with HP UPS Network Module, the HP UPS R7000 can be configured to extend the runtime for more critical devices. Ease of Maintenance with The UPS R7000 is modular in design, and both the battery and the electronics modules are hot Hot-Swappable Batteries swappable. HP UPSs are designed with simple access through the front panel. Users can safely install and Electronics Modules new batteries without ever powering down connected server and server options. Extended Runtime Module The UPS R7000 supports up to four Extended Runtime Modules. Each module is 3U (5.25 inches), a rack (ERM), R7000 mountable battery module that extends your overall battery runtime. HP Quality HP's hardware qualification is the toughest in the industry. Extensive evaluation, testing, product improvement, and an unsurpassed warranty guarantee the highest level of system protection, electrical performance, product quality and compatibility. Compatibility Compatible with all HP servers, storage, racks, rack options, and other rack mountable HP equipment. For PDU options please refer to the UPS/PDU compatibility matrix on http://www.HP.com/ups. Warranty The HP UPS R7000 is covered by a three year warranty, with the first year including parts and labor. Also, standard on all HP UPS units, is our exclusive Battery Pre-Failure Warning which extends the advantage of a HP three-year, limited warranty by applying it to the battery before it actually fails. This warranty is offered worldwide. Specifically, the Pre-Failure Battery Warranty ensures that when customers receive notification from the HP UPS Network Module that the battery may fail, the battery is replaced free of charge under the warranty. All HP Rackmount UPSs are also automatically covered to the full service level of ProLiant Care Packs in the same rack so there is no need to purchase additional Care Packs for the UPSs. Batteries are not covered under Care Pack Coverage NOTE: $250,000 Computer/Load Protection Guarantee is also provided in NA, in addition to the HP three year, limited warranty. DA - 14110 Worldwide — Version 3 — October 7, 2011 Page 4 QuickSpecs R7000 Uninterruptible Power System (UPS) Service and Support Service and Support HP Technology Services HP Technology Services offers you consultants and support experts to solve your most complex infrastructure problems. We help keep your business running, boost availability and avoid downtime. Protect your business beyond warranty with HP Care Pack Services When you buy HP Options, it's also a good time to think about what level of service you may need. HP Care Pack services provide total care and support expertise with committed response choices designed to meet your IT and business need. Recommended HP Care Pack Services for optimal satisfaction with your HP product Recommended Services 3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service Provides you with rapid remote support and if required an HP authorized representative who will arrive on site any time and day of the year to begin hardware maintenance service within 4 hours of the service request being logged. http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE HP ProLiant Server Hardware Installation Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN Related HP Care Pack Services to enhance your HP product experience Related Services 3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the system to help return the hardware to operating condition within 6 hours of the initial service request to the HP Global Solution Center http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EN Insight Remote Support Parts and materials Coverage HP Proactive Select Service Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy Proactive Select Service Credits when you purchase your hardware and then use the credits over the next 12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN Delivers secure remote monitoring and support for HP servers and storage, 24x7 at no additional cost. Available as part of HP Warranty, Care Pack and Service Contract offers. HP will provide HP-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements. Supplies and consumable parts will not be provided as part of this service; standard warranty terms and conditions apply. Parts and components that have exceeded their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual or the technical product data sheet will not be provided, repaired or replaced as part of this service. For ProLiant servers and storage systems, this service covers HP-branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as external monitors up to 22" and tower UPS products; these items will be covered at the same service level and for the same coverage period as the server unless the maximum supported lifetime and/or the maximum usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty terms and conditions apply. The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's DA - 14110 Worldwide — Version 3 — October 7, 2011 Page 5 QuickSpecs R7000 Uninterruptible Power System (UPS) Service and Support For more information operating manual or the technical data sheet are not eligible for the defective media retention service feature option. To learn more on services for HP ESSN Options, please contact your HP sales representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant or www.hp.com/services/bladesystem DA - 14110 Worldwide — Version 3 — October 7, 2011 Page 6 QuickSpecs R7000 Uninterruptible Power System (UPS) Related Options HP UPS Options HP Care Pack HP R5KVA and R7KVA 3U Extended Runtime Module NOTE: #0D1 will appear after the part number on the sales order if HP factory integration is indicated. HP Install Universal Power Supply 3KVA to Below 6KVA Service DA - 14110 Worldwide — Version 3 — October 7, 2011 AF464A U4693E Page 7 QuickSpecs R7000 Uninterruptible Power System (UPS) UPS Model Matrix High Voltage Models Part Number AF462A (NA/JPN) AF463A (International) Operating Power Out Input Connection Output Connection (VA/Watts) Voltage Settings 200/208* 7200VA/7200W Hubble LS1: 15A CB - 3 x C19 + 1 x L6-30R CS8265C, LS2: 15A CB - 3 x C19 + 1 x L6-30R 3m cord 220, 230*, 240 6300VA/ 6300W IEC-309 32Amp, LS1: 15A CB - 3 x C19 + + one pigtailed @230V input 3m cord receptacle IEC-309 32Amp LS2: 15A CB - 3 x C19 + + one pigtailed receptacle IEC-309 32Amp * Factory default setting. DA - 14110 Worldwide — Version 3 — October 7, 2011 Page 8 QuickSpecs R7000 Uninterruptible Power System (UPS) Estimated Backup Times Chart (Minutes) All Models Load (Percent*) (Percent ) Estimated battery runtime With One Extended Runtime With Four Extended Runtime (minutes) Module (Minutes) Modules (Minutes) NA/JPN INTL NA/JPN INTL NA/JPN INTL 20 98 117 301 359 52 62 50 33 37 103 115 13 15 80 18 21 57 66 6 7 100 13 15 39 50 4 5 NOTE: Backup times are estimated for typical applications. Actual performance will depend on load and battery conditions. DA - 14110 Worldwide — Version 3 — October 7, 2011 Page 9 QuickSpecs R7000 Uninterruptible Power System (UPS) Technical Specifications Unit Dimensions (HxWxD) Unit Weight Shipping Weight BTU Break Down Electrical Input 6.75 in (17.1 cm) x 17.2 in (43.7 cm) x 28.9 in (73.4 cm) 165 lbs/75 kg 210 lbs/100 kg 649 INTL, 581 NA/JPN BTU On Line 1290 INTL, 1501 NA/JPN BTU On Battery 216V Battery String Voltage 12V 45W Battery Type 18 Battery Quantity 160-253V at 200/208V nominal; 160-253V at 220, 230, and 240V Voltage Range nominal Frequency Input Plug Online Efficiency REPO Electrical Output Online Regulation On battery Regulation Voltage Wave Form Connections Output Protection Battery Type Extended Batteries Backup Time Recharge Time Battery String Voltage Battery Type Battery Quantity Maximum wattage based AF426A NA/JPN on voltage input AF463A INTL Communications Serial Ports Included LED Indicators Environmental and Safety Operating Temperature Transit Temperature Storage Temperature Operating Humidity Storage Humidity Operating Altitude DA - 14110 50/60 Hz Part number AF462A: Hubble CS6285C, 3m cord Part number AF463A: IEC-309 32Amp, 3m cord 95% Remote Emergency Power-Off disables AC power to load -10% to +6% of nominal voltage ±5% of nominal voltage Sine wave See Model Selection Matrix; divided into 2 Load Segments Re-settable circuit protectors Maintenance-free, sealed, valve-regulated lead acid (VRLA) Up to four ERMs supported See Backup Times Chart <3 hours to 80% usable capacity; <48 hours for complete recharge 216V 12V 45W 18 200-240V: 7200VA/7200W 220V: 6100VA/6100W 230V: 6300VA/6300W 240V: 6500VA/6500W Standard DB-9 ports (ships with communication cable) HP UPS Network Module LED and switch membrane integrated into the front panel; with four-button control (three buttons for UPS power control and one button under the front bezel for configuration). 50° to 104° F (10° to 40° C ) -13° to 131° F (-25° to 55° C) 32° to 77° F (0° to 25° C ) 20% to 80% (non-condensing) 5% to 95% Up to 6,562 ft (2000 m) above sea level Worldwide — Version 3 — October 7, 2011 Page 10 QuickSpecs R7000 Uninterruptible Power System (UPS) Technical Specifications Transit Altitude Audible Noise Safety Markings Safety Certifications EMC Markings Emissions Immunity REPO Port Environment-friendly Products and Approach End-of-life Management and Recycling 49,212 ft (15,000 m) above sea level <46db (at 1m from surface of unit) NA/JPN: UL, cUL Int'l: GS, CE, GOST UL1778, UL60950-1; CSA22.2 No.107.3, No.60-1950; EN50091-1-1; EN60950-1 IEC62040-1-1 NA/JPN: FCC, VCCI, ICES, CISPR Int'l: BSMI, C-Tick, CISPR FCC CFR 47, Part 15 Class A, EN50091-2 IEC 801-2, IEC 801-3, IEC 801-4, IEC 801-5 Meets NEC code 645-11 intent and UL requirements Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. © Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. DA - 14110 Worldwide — Version 3 — October 7, 2011 Page 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 11 Page Layout : SinglePage Page Mode : UseOutlines Creator : llPDFLib program Create Date : 2011:10:03 08:17:53 Producer : llPDFLib 2.x Author : 2007 Desktop Assistance, LP. All Rights Reserved Title : R7000 Uninterruptible Power System (UPS) Subject : HP Product Bulletin Keywords : QuickSpecEXIF Metadata provided by EXIF.tools