TITANIUM PRE Bianca GB Titanium_catalogue_GB Catalogue
User Manual: titanium_catalogue_GB
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
marco morosini TECHNICAL SPECIFICATIONS loudspeaker specifications T200 / T3A components 10" woofer power handling (EIA RS-426A) impedance passive crossover T300 / T4A T400 / T5A T500 / T6A 1" compression driver with titanium diaphragm 12" neodymium woofer 15" neodymium woofer T4MA T5MA T5SA 15" woofer 15" neodymium woofer 1" coaxial driver 8" midrange 15" neodymium woofer 200W continuous 400W peak 300W continuous 600W peak 400W continuous 800W peak 8 Ohm 4 / 8 Ohm 4 / 8 Ohm 4 / 8 Ohm LP: 12dB/ott. @ 3kHz HP: 18dB/ott. @ 3kHz LP: 12dB/ott. @ 2.5kHz HP: 18dB/ott. @ 2.5kHz LP: 12dB/ott. @ 2kHz HP: 18dB/ott. @ 2kHz LP: 12dB/ott. @ 5.8kHz HP: 6dB/ott. @ 5.8kHz 12" woofer - 500W continuous 1000W peak - LP: 18dB/ott. @ 800Hz - HP: 12dB/ott. @ 800Hz 1/2 x SPEAKON connections (passive version) dimension weight (passive / active) processor/amplifier specifications output power EIA (1kHz, max THD 1%) - Laminated beech plywood with black scratch-resistant paint - Metal grid - Metal handles and speaker stand adapter construction 357x490x355 400x608x390 452x690x430 452x804x430 506x326x422 586x356x495 466x600x600 14,5 / 22 17,5 / 25 22,5 / 32 28 / 37 26 33,5 43,5 T3A T4A 100W high 200W low 100W high 300W low T5A 100W high 400W low T4MA T5MA T5SA 50W high 250W low 100W high 350W low 500W 0 dB (0.775V) input sensitivity 30 kOhm (balanced) - 15 kOhm (unbalanced) input impedance ENG Generalmusic reserves the right to make any aesthetic, functional or design modification to any of its products without any prior notice. T6A 200W high 400W low A/D converters 24 bit D/A converters 24 bit dynamic range 100 dB sampling rate 48kHz active crossover type Bessel, Butterworth or Linkwitz-Riley variable from 15.6 Hz to 16 kHz 6, 12, 18 o 24 dB per otcave 25 parametric bands peak, 6dB lo-shelf, 12dB lo-shelf, 6dB hi-shelf, 12dB lo-shelf, notch gain+/-15dB, variable with 0.5dB step bandwidth from 0.05 to 3.00 octave, variable with 0.05 step frequency from 15.6 Hz to 16 kHz eq max delay 200 mm alignment delay noise gate, anti-feedback, multiband compressor plug-in The sound of innovation. Independent peak limiter on each output Long term power protection on each output LFC - Low Frequency Control protections distortion <0.02 % volume - PRESET select - shield on/off controls 1 x COMBO + 1 x XLR-M connections 2 x XLR-F + 2 x XLR-M see label power supply system specifications T200 / T3A T300 / T4A T400 / T5A T500 / T6A T4MA T5MA T5SA SPL MAX continuous 120 dB 123 dB 124 dB 126 dB 122 dB 124 dB 125 dB 60Hz - 20kHz 55Hz - 20kHz 50Hz - 20kHz 45Hz - 20kHz 55Hz - 20kHz 50Hz - 20kHz 40Hz - 160Hz 90˚ x 65˚ 100˚ x 60˚ 100˚ x 60˚ 90˚ x 65˚ 80˚ x 80˚ 80˚ x 80˚ - frequency response (-10 dB) dispersion (OxV) T3A/T4A/T5A/T6A preset list T5SA preset list T4MA/T5MA preset list LEM INDOOR LEM OUTDOOR FLAT ENTERTAIN MAX LOUD CD PLAYER WALL MOUNT STAGE MONITOR LEM INDOOR SW LEM OUTDOOR SW FLAT SW ENTERTAIN SW MAX LOUD SW CD PLAYER SW WALL MOUNT SW MIC PLUG&PLAY d400 d400 HOUSE 2xT3A + 2 x T5SA 2xT3A + 1 x T5SA T4A T4A HOUSE T5A/T6A T5A/T6A HOUSE T4MA T5MA 80Hz 100Hz 120Hz 140Hz 160Hz 180Hz FULL RANGE VOCAL 1 VOCAL 2 DRUMFILL+SW GUITAR PIANO PAIR ONSTAGE The same presets are also available with plug-in ANTI-FEEDBACK activated. GENERALMUSIC spa via delle Rose, 12 S. Giovanni M. (RN) 47842, Italy tel. +39 0541.959511 fax + 39 0541.957404 www.lemaudio.com titanium titanium T4MA and T5MA stage monitors Titanium series includes two stage monitors, T4MA and T5MA, which use coaxial speakers and are housed in small-size, low-profile cabinets that can be ‘invisible’ on any stage. Both models have the choice of two different set-ups when placed on stage (35° or 55°), according to the distance of the listener from the monitor. Even T4MA and T5MA, thanks to the integrated digital processor, offer the choice of 16 different presets prepared to provide the monitors with diverse acoustic and dynamic responses according to the instruments used. The monitors can be coupled also to the T5SA sub-woofer to obtain full-range, high-efficiency drum-fill systems. the sound of innovation. Titanium series by LEM is a loudspeaker system line in beech plywood cabinets that combines professional features and state-of-the-art performance with the most advanced technology. Each part of the project, from custom made loudspeakers, to oversized amplifiers and cabinet construction has been carefully designed for the optimum performance and maximum sound quality in every situation. Beyond this, the active versions of titanium speakers are equipped with one of the most innovative digital control systems for loudspeakers. Thanks to 40bit resolution and 24bit low-noise conversion, the titanium digital processor is able to perform, with very high precision, all the processing features needed for the best acoustic performance. The titanium series consists of 11 models, which include 4 passives, 4 actives, a sub-woofer and two active stage monitors. These have been designed to be used either as mobile systems in LIVE and DJ applications or as a fixed systems in small and medium sized public venues, clubs, conference rooms and theatres. T5SA sub-woofer T5SA sub-woofer uses a special 15” neodymium woofer with a 4” moving coil, able to give the greatest excursion, efficiency and power handling. T5SA includes a series of PRESETS with crossover and EQ settings for the perfect match with each model of titanium, including stage monitors. Moreover, there is a series of generic PRESETS with crossovers at different frequencies, which allow T5SA to be used with other brands of satellites. To make transportation easier the T5SA has two metal handles and 4 wheels on the rear panel. technology The titanium active versions are equipped with bi-amplified modules (class H for low section and class AB for high section), able to deliver to the transducers continuous power with a very high dynamic reserve and efficiency. Each amplification module includes a dedicated digital processor based on LEM’s RED208 proprietary DSP, one of the most advanced DSPs in the world especially designed for digital audio applications. With high fidelity sound and a huge processing power, the processor offers an impressive set of functions, including high-precision EQ and CROSSOVER filters, delay lines for a perfect loudspeaker alignment and a multi-function protection system for maximum durability and reliability. In addition, thanks to digital processing, all titanium active models offer the possibility to choose between 16 different PRESETS, prepared by LEM’s technicians and sound engineers to provide the speakers with diverse acoustic and dynamic responses for all kinds of usage and personal requirements. Unlike usual active speakers, thanks to the available presets, the titanium speakers give you whatever kind of sound you need in any situation. The presets can be selected from the control panel and consist of diverse equalizations and DSP settings, which also allows the different titanium models to be used with the active sub-woofer T5SA. cabinets Titanium cabinets are made with 13-layer beech plywood, which combines light weight with strength and high durability. They are finished with black scratch-resistant paint and are protected with 1,5 mm metal grid with an exclusive design and double folding for an improved stiffness. Each model includes one or two metal handles and a metal speaker stand adaptor. In the 10” and 12” models also included are 4 M8 flying points for wall or ceiling mounting using simple chains or steel cables or the more suitable LEM accessories SC41 (T4A and T300) and SC42 (T3A and T200). SC41 speakers The HF section uses a 1” compression driver with titanium diaphragm, which provides higher reliability and greater sound brilliance than those made in traditional materials. The wide dispersion horns provide the maximum coverage without distortion. All woofers are custom made to LEM’s specifications and they offer greater power handling and efficiency. Neodymium, used on the woofer’s magnet, guarantees high quality acoustic performance whilst, at the same time, reduces the total weight of the cabinet. passive versions T3A / T200 Two way system 1” compression driver with titanium diaphragm 10” woofer Amplifier 100+200W (T3A) Power handling 200W (T200) T5SA Sub-woofer 15” neodymium woofer amplifier 500W T4A / T300 Two way system 1” compression driver with titanium diaphragm 12” neodymium woofer amplifier 100+300W (T4A) power handling 300W (T300) T5A / T400 Two way system 1” compression driver with titanium diaphragm 15” neodymium woofer amplifier 100+400W (T5A) power handling 400W (T400) T6A / T500 Three way system 1” compression driver with titanium diaphragm 8” midrange 15” neodymium woofer amplifier 200+400W (T6A) power handling 500W (T500) SC42 The titanium passive versions (T200, T300, T400 and T500) are equipped with crossover filters made with selected components, for an optimal frequency distribution, and with a sophisticated electronic protection circuit to prevent the overload of the HF driver. All models, T200 excluded, are available with 4 or 8 Ohm impedance. T4MA Two way stage monitor coaxial loudspeaker 1” compression driver 12” woofer amplifier 50+250W T5MA Two way stage monitor coaxial loudspeaker 1” compression driver 15” woofer amplifier 100+350W
Source Exif Data:
File Type : AI File Type Extension : ai MIME Type : application/vnd.adobe.illustrator PDF Version : 1.4 Linearized : Yes Page Count : 2 Creator : Adobe Illustrator(R) 10.0 For : G4 1250, AD studioservice srl Title : TITANIUM PRE bianca GB.pdf Create Date : 1-09-2004 16:58 Bounding Box : -54 -54 1245 896 Creator Version : 10 Container Version : 9 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:118e614c-fc2c-11d8-a39a-00039383aa7c Producer : Adobe PDF library 5.00 Modify Date : 2004:09:01 17:32:00+02:00 Metadata Date : 2004:09:01 17:32:00+02:00 Creator Tool : Adobe Illustrator 10.0.3 Document ID : uuid:e38efb8f-fc27-11d8-a39a-00039383aa7c Format : application/pdfEXIF Metadata provided by EXIF.tools