ECARE ELECTRONICS TP65 Indoor/Ourdoor humidity & Temperature Monitor User Manual

SHENZHEN ECARE ELECTRONICS CO., LTD Indoor/Ourdoor humidity & Temperature Monitor

a href="https://usermanual.wiki/ECARE-ELECTRONICS" itemprop="url"> ECARE ELECTRONICS >

User Manual

-1- V20170927 EN FR DE IT ESEN Instruction Manual Page 2FR Manuel D'utilisational Page 12Indoor/Ourdoor humidity & Temperature MonitorModel No.: TP-65DE Bedienungsanleitung Seite 23IT Istruzioni per l’uso Pagina 35ES Manual de instrucciones Página 46Comprar sensores remotos adicionalesEl número de modelo del sensor remoto de esta unidad es TPR65.Se pueden pedir sensores adicionales directamente de Amazon o de ThermoPro contactando nuestro servicio al cliente utilizando los detalles que se encuentran más abajo. Servicio de atención al clienteTeléfono: 1-877-515-7797 (solo EE.UU. y Canadá)Correo electrónico: service@buythermopro.comHorario: De lunes a viernes de 8:00 AM a 6:00 PM ESTbajo esta garantía, comuníquese con el Servicio de atención al cliente por teléfono o por correo electrónico para obtener las instrucciones sobre cómo embalar y enviar el producto a ThermoPro. Esta garantía le otorga derechos legales específicos y usted puede también tener otros derechos que varían en función del estado donde se encuentra.ES-56-
IntroductionCongratulations on your purchase of the wireless indoor/outdoor humidity and temperature monitor. You will now be able to know the outdoor/indoor temperature and humidity while sitting inside.Hints and tipsIf the receiver does not connect to the transmitter, try the following:Press and hold the CHANNEL/SYNC button on the base station and then press TX button on the transmitter. Relocate the base station and/or the remote unit until connection is found.Signals from other electronic devices may cause interference. Place the base station and receiver away from these devices.The transmitter may not function properly in extreme temperatures due to battery power. Replace the batteries or the unit will resume proper function in more moderate weather.If the base station is attached to a refrigerator or a metal object by magnet, the transmission may be shorter. Remove the base station from the refrigerator or the metal object or place the base station and remote sensor as close as possible.If the Humidity is lower than 10%, it will display LLL.WarningsDo not subject the unit to excessive force, shock, dust, temperature or humidity.Do not immerse the unit in water.Do not remove any screws.Do not dispose this unit in a fire. IT MAY EXPLODE.-2- -3-Keep unit away from small children. The unit or parts of the unit might be a choking hazard.Never attempt to recharge the batteries using any other methods.Dispose of the unit legally and recycle when possible.Specifications1. 433 Mhz transmission frequency2. Transmission range up to 200 feet in open area. (range maybe shorter based on interference present)3. Indoor Temperature range: -4 °F ~ 158°F (-20 °C ~ 70 °C) 4. Outdoor Temperature range: -58°F ~ 158°F (-50 °C ~ 70 °C)5. Humidity range: 10% ~ 99%6. Temperature tolerance: +/- 2.0 °F (+/- 1.1 °C)7. Humidity tolerance: ±2% from 30% to 80%; ±3% below 30% and above 80%8. Power: 2 X AAA 1.5V for base unit and 2 X AAA 1.5V for remote sensorComponents1. One base station unit (Receiver)2. One remote sensor (Transmitter) *Although the remote sensor is designed to be rain-proof, the remote sensor must be always placed upwards so that rain won't get inside the sensor through the vent holes on the bottom of the senor which functions to let the remote sensor detect the environmental temperature and humidity more precisely and quickly.EN EN
-4- -5-EN ENIndoor base station (receiver) features1. LCD display: Displays the current outdoor humidity/temperature and indoor humidity/temperature 2. Battery Compartment: Holds 2 AAA batteries to power the unit3. Tabletop and wall-mounted design4. Indoor Temperature range: -4 °F ~ 158°F (-20 °C ~ 70 °C). 5. Humidity range: 10% ~ 99%.6. Temperature display unit: °C and °F selectable7. Temperature Resolution: 0.1 °C/°F8. Humidity Resolution:1%9. Low battery indication 10. Four touch buttons11. Backlight Touch buttonsCHANNEL/SYNC: Press once to display the temperature and humidity readings from up to 3 outdoor remote sensors; Press and hold this button to enter the synchronization mode. MAX/MIN/CLEAR: Touch once to display the maximum or minimum temperature and humidity; Press and hold to clear the history data.Large LCD displayOutdoor temperatureOutdoor humidityIndoor temperatureBattery compartmentFour Touch Buttons : Wall hanging holeIndoor humiditySIDEStand Magnet°or ºF; F/°C/History: Press to select the temperature display in ºC When the display shows the maximum or minimum temperature and humidity. Touch this button once to set the maximum and minimum data record time interval between ALL TIME or 24 hours. Note: Both ALL TIME and 24 hours represent the time since you last manually cleared the history data or installed a new battery. : Touch once to turn on/off backlight. If you do not press the button for 15 seconds, the backlight will be automatically turned off.Temperature & humidity trend1. indicates the temperature & humidity is in an increasing trend. 2. indicates the temperature & humidity is in a no change trend. 3. indicates the temperature & humidity is in a decreasing trend.Outdoor remote sensor (transmitter) featuresChannel 1, 2, 3TXWall hanging holeTX LED RESET 2 AAA batteryVent holes
Download:
Mirror Download [FCC.gov]
Document ID3637929
Application IDLcN9Rb/3cMEhS5SzancXqg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize106.27kB (1328369 bits)
Date Submitted2017-11-13 00:00:00
Date Available2017-11-20 00:00:00
Creation Date2017-09-27 13:40:42
Producing SoftwareCorel PDF Engine Version 14.0.0.701
Document Lastmod2017-11-13 15:48:22
Document TitleThermopro-EN,FR,DE,IT,ES-TP-65说明书20170927
Document CreatorCorelDRAW
Document Author: Administrator
FCC ID Filing: 2AATP-TP65

Navigation menu