ETI Solid State Lighting 5319112017 LED downlight User Manual E349551 00000000 I 1

Elec-Tech International Co., Ltd. LED downlight E349551 00000000 I 1

User manual

Download: ETI Solid State Lighting 5319112017 LED downlight User Manual E349551 00000000 I 1
Mirror Download [FCC.gov]ETI Solid State Lighting 5319112017 LED downlight User Manual E349551 00000000 I 1
Document ID3528280
Application IDEz6H4oAD1Rf8B6pmXn2Qtw==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize32.14kB (401794 bits)
Date Submitted2017-08-27 00:00:00
Date Available2017-08-27 00:00:00
Creation Date2017-07-19 09:08:45
Producing SoftwareAcrobat Distiller 9.3.3 (Windows)
Document Lastmod2017-08-25 14:50:49
Document TitleMicrosoft Word - E349551-00000000-I-1.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: 21364

User Manual
Product Name:
Model No.:
LED downlight
531911XX(XX=00~99)
B rand Name: C ommercial Electric
Manufacturer: Elec-tech International.,Co.Ltd
1. 产品简介 Product Introduction
1.1. 产品描述:Product Description :
1.2. 产品示意图:oduct schematic diagram:
2. 产品特性 Product features
2.1 技术参数 Specification
项目 /单位
Item / unit
电气参数
Electronic ratings
整灯功率 /W
Rated Power/W
输入电压 /V
Rated Input voltage/V
工作频率/Hz
Frequency/Hz
电源效率/%
Rated Power efficiency
功率因数(PF) Rated Power Factor
调光方式
Dimming method
光源参数 Photometric ratings
LED 类型/数量
LED Type/Quantity
整灯光通量 /Lm Lumen
色温/K
Temprature/K
显色指数/Ra
CRI
物理参数 Physical information
材质
Material
工作温度
operating temperature
防护等级
IP rating
灯具规格(L×W×H)/mm
Luminaire dimension(L×W×H)/mm
参数 Specification
11W
AC 120V
60Hz
>90%
>0.9
SCR
and
dimmber
bluetooth
2835/32pcs,3030/18pcs
670lm
2700-5000K,R+G+B
90
AL、PC
45℃
IP20
190*190*87.5mm
3 使用方法 Method of application
3.1 安装示意图(A) Installation schematic diagram(A)
A 切断电源,检查安装筒尺寸。
A:Turn off the power supply. Check the dimension of recessed can and the lamp holder type to see whether the retrofit
kit can fit the luminaire.
B:将 E26 灯头旋进并旋紧
B: crew clockwise the E26 adaptor into the lamp holder. Tighten.
C:连接好连接器。
C: Connect the male to the female connector.
D:将筒灯装进安装筒并卡紧。
D: Squeeze the “V shape” clips to match the grooves on the inside of the can, and slide the luminaire up into the can firmly.
E:导通电源
E: Make sure the trim ring is flush with ceiling. Turn on the light to check the luminaire working status.
3.2 bluetooth APP dimmber
1 add new light
2 scan light
3 user interface
4 RGB user interface
3.3 维护说明 Maintenance Instruction
*为延长使用寿命请勿使用酒精等挥发性溶剂擦拭灯体;
*Do Not use volatile solvent such as alcohol to clean the troffer.
*清洁时可以使用柔棉布沾肥皂水拧干后擦拭灯体;
*Use soft cotton cloth with suds to clean the troffer .
*非专业人士请勿拆修灯具;
*Non-profecssional do Not attempt to take apart and repair the troffer .
*不可拆卸软缆或软线,如果损坏须请专业人士或制造厂商更换。
*No disassemble the soft cord, if broken, please invite professional personnel or ask the
change
manufacturer to
4 环境要求 Environmental requirement
使用环境温度 Operating temperature:45℃;
5.
WARNING
WARNING - Risk of fire or electric shock. LED Retrofit Kit installation
requires knowledge of luminaires electrical systems. If not qualified, do
not attempt installation. Contact a qualified electrician.
WARNING - Risk of fire or electric shock. Install this kit only in luminaires
that have the construction features and dimensions shown in the photographs
and/or drawings and where the input rating of the retrofit kit does not exceed
the input rating of the luminaire.
Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
WARNING - To prevent wiring damage or abrasion, do not expose wiring to edges
of sheet metal or other sharp objects.
Installers should not disconnect existing wires from lampholder terminals
to make new connections at lampholder terminals. Instead installers should
cut existing lampholder leads away from the lampholder and make new electrical
connections to lampholder lead wires by employing applicable connectors.
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved
THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE
SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING
JURISDICTION.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : 21364
Title                           : Microsoft Word - E349551-00000000-I-1.doc
Create Date                     : 2017:07:19 09:08:45+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2017:08:25 14:50:49+08:00
Metadata Date                   : 2017:08:25 14:50:49+08:00
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Document ID                     : uuid:92bdd736-2f81-4982-9379-5cf611977dd3
Instance ID                     : uuid:519022ff-b9f2-48a3-899e-e8a18d6012fe
Page Count                      : 9
Author                          : 21364
EXIF Metadata provided by EXIF.tools
FCC ID Filing: XZH-5319112017

Navigation menu