Elatec TWN4F4 Transponder reader User Manual

Elatec GmbH Transponder reader Library

a href="https://usermanual.wiki/Elatec" itemprop="url"> Elatec >

user manual

             Transponder Reader TWN4 MultiTech 3 Quick Start Guide Rev. 1.0
Elatec GmbH Page 2 of 12 1. Introduction The transponder reader TWN4 is a device for reading and writing RFID transponders. There are different versions of TWN4 devices available, which cover a large range of transponder types both in the frequency range of 125kHz and 13.56MHz. 2. Getting Started 2.1  Cable Connection In order to start operating a TWN4 transponder reader, it simply has to be connected to a host.  2.2  Power Up Once a TWN4 reader is connected to the host, it detects the type of communications cable (USB or RS232), with which it is connected to the host.   Additionally, the RS232 is sending a version string via RS232 to the host. 2.3  Enumeration (USB Only) This is only applicable for the USB version: Once the device has been powered up, it is waiting for completion of the enumeration by the USB host. As long as the device is not enumerated, it is entering a minimum power consumption mode, where both LEDs are turned off.
Download:
Mirror Download [FCC.gov]
Document ID3454288
Application IDKG1h150WxBhc8SsLxvIrww==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.32kB (366546 bits)
Date Submitted2017-07-07 00:00:00
Date Available2017-07-07 00:00:00
Creation Date2017-05-09 17:24:47
Producing SoftwareMicrosoft® Word 2016
Document Lastmod2017-05-09 17:24:47
Document TitleLibrary
Document CreatorMicrosoft® Word 2016
Document Author: Christian Rötzer
FCC ID Filing: WP5TWN4F4

Navigation menu