Elatec TWN4F6 RFID Reader User Manual

Elatec GmbH RFID Reader Library

a href="https://usermanual.wiki/Elatec" itemprop="url"> Elatec >

user manual

Device for reading and writing RFID transponders TWN4 MultiTech 2 HF Manual Rev. 3
Elatec GmbH Page 2 of 8 1. Introduction The TWN4 MultiTech 2 HF is an integrated device for contactless read/write operations on a transponder, i.e. a transponder card in the frequency range of 13.56 MHz. 2. Getting Started 2.1 Cable Connection In order to start operating a device for reading and writing RFID & BT transponders, the TWN4 MultiTech 2 HF simply has to be connected to a host. 2.2 Power Up Once a TWN4 MultiTech 2 reader is connected to the host, it detects the type of communications cable (USB or RS232), with which it is connected to the host. Additionally, the RS232 is sending a version string via RS232 to the host. 2.3 Enumeration (USB Only) This is only applicable for the USB version: Once the device has been powered up, it is waiting for completion of the enumeration by the USB host. As long as the device is not enumerated, it is entering a minimum power consumption mode, where both LEDs are turned off.
Download:
Mirror Download [FCC.gov]
Document ID3876206
Application ID9o1uiKg6+exQ05qeL9+1IQ==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize22.75kB (284322 bits)
Date Submitted2018-06-05 00:00:00
Date Available2018-06-05 00:00:00
Creation Date2018-05-28 13:48:38
Producing SoftwareMicrosoft® Word 2016
Document Lastmod2018-05-28 13:48:38
Document TitleLibrary
Document CreatorMicrosoft® Word 2016
Document Author: Christian Rötzer
FCC ID Filing: WP5TWN4F6

Navigation menu