Elatec TWN4F8 RFID Reader User Manual

Elatec GmbH RFID Reader Library

a href="https://usermanual.wiki/Elatec" itemprop="url"> Elatec >

user manual

Transponder Reader TWN4 MultiTech 3 LF Quick Start Guide / Integration Manual Rev. 3.0
Elatec GmbH Page 2 of 12 1. Introduction The transponder reader TWN4 MultiTech 3 LF is a device for reading and writing RFID transponders. There TWN4 MultiTech 3 LF has a working frequency of 125 kHz. 2. Getting Started 2.1 Cable Connection In order to start operating a TWN4 MultiTech 3 LF transponder reader, it simply has to be connected to a host. 2.2 Power Up Once a TWN4 reader is connected to the host, it detects the type of communications cable (USB or RS232), with which it is connected to the host. Additionally, the RS232 is sending a version string via RS232 to the host. 2.3 Enumeration (USB Only) This is only applicable for the USB version: Once the device has been powered up, it is waiting for completion of the enumeration by the USB host. As long as the device is not enumerated, it is entering a minimum power consumption mode, where both LEDs are turned off.
Download:
Mirror Download [FCC.gov]
Document ID3911491
Application IDIh1U2uoMBMUYcN3pFTdiTA==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.03kB (362902 bits)
Date Submitted2018-07-04 00:00:00
Date Available2018-07-04 00:00:00
Creation Date2018-07-03 15:45:31
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2018-07-03 15:45:31
Document TitleLibrary
Document CreatorMicrosoft® Word 2010
Document Author: Christian Rötzer
FCC ID Filing: WP5TWN4F8

Navigation menu