Elpas Solutions 5-LW2430371 Lone Worker Active RFID Tag User Manual

Elpas Solutions Ltd. Lone Worker Active RFID Tag

a href="https://usermanual.wiki/Elpas-Solutions" itemprop="url"> Elpas Solutions >

User manual

Elpas 3 Shield P/Ns: 5-LW200037-1 (BLE, LF, No Button), 5-LW240057-1 (Fall detect, RF/LF, BLE), 5-LW243037-0 (Fall Detect, RF/LF/IR), 5-LW242057-0 (Fall Detect, RF/LF), 5-LW243037-1 (Fall Detect, IR/RF/LF, BLE), 5-LW242057-1 (Fall Detect, RF/LF, BLE) User Guide www.elpas.com Page 1 of 6V1/June 2015 Introduction This User Guide provides basic instructions for the successful usage of the Lone Worker Transmitter. CAUTION! Reasonable effort was made to ensure that the specifications and other information in this guide are accurate and complete at the time of its publication. Nonetheless, all information contained in this document is subject to change at any time without prior notice. Any modifications to this equipment without prior written consent of Elpas Solutions Ltd. will void all warranties including the pertinent regulatory certifications and as such revoke your authority to operate this product. Furthermore, unauthorized modifications may also result in damage to this device and may cause a safety hazard to the users. Product Description The Elpas Shield is a personal duress button device with optional pull cord and fall detection capabilities. Elpas Shield is designed for real-time monitoring and tracking of staff members and visitors, both indoors and outdoors. The LoneWorker Fall Detect Transmitter is designed both for seniors in assisted living facilities or work place staff members that may be subject to attack or injury in high-risk environments. Alarms can be triggered either by squeezing the two side buttons. In the Fall Detect version, when worn on a belt, a short rip cord may be attached to a belt loop so that an alarm is transmitted when the device is pulled off the belt. Note: Users can also wear the Shield as a pendant using a lanyard. If you choose to do so, make sure you use a lanyard for which, the force required to unlatch the tether switch is less than the force required to open the clasp. The pull mechanism is particularly useful for seniors with arthritis who have difficulties pressing buttons. The LoneWorker Fall Detect Transmitter also detects falls and alarms when tilted horizontally. To prevent false alarms, the device indicates a pre-alarm by giving the wearer a chance to cancel the alarm before it is transmitted by pressing on the front cancel button. (Actual product may vary from photo) Button press or pull cord (pull cord is present only in Fall detect version) should be used as the primary means of calling for help even after a fall. The fall detection is meant to alert in the event that the victim falls unconscious and may not trigger if not sufficiently horizontal. Elpas Shield based help call systems may be monitored by Elpas ELC controllers and/or by Eiris Software which also receives alerts, through Eiris Cloud, from the LoneWorker application that connects to Elpas Shield through Bluetooth, outdoors. Elpas Low Frequency Beacons may be used to provide room level indoor location. Outputs on all Elpas network devices may be used to drive sirens, strobe lights or PA systems. Alerts may be sent to various handheld devices such as DECT handsets using Eiris DECT interfaces or to IOS or Android smartphones using EirisGo apps. Calls may be cleared by exposing Elpas Shield to a responder’s handheld LF beacon requiring that staff arrive at the location of the caller. The same Elpas infrastructure used for the duress solution may also be leveraged for Access control, Asset tracking, Attendance and intrusion alarming making Elpas one of the most competitive comprehensive solutions available today.
Download:
Mirror Download [FCC.gov]
Document ID2867038
Application IDMu1Iz0ejP84kkDoqDg24ww==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize32.11kB (401343 bits)
Date Submitted2016-01-08 00:00:00
Date Available2016-01-08 00:00:00
Creation Date2017-08-26 01:41:28
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-08-26 01:41:28
Document TitleMicrosoft Word - Lone_Worker_Transmitter_BLE_UG_A4_EN_V1.docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: marina
FCC ID Filing: O4X5-LW2430371

Navigation menu