Excera Technology EP8000U1 Digital Portable Radio User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3032183
Application ID	XuhfS10QKNm515cIrFdhpg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	167.99kB (2099915 bits)
Date Submitted	2016-06-17 00:00:00
Date Available	2016-06-17 00:00:00
Creation Date	2017-12-08 14:56:58
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-08 14:56:58
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	谢婷

U1
Digital Portable Radio
User Manual
Contents
Important Information
Digital Conventional Functions and Operations
12
RF Energy Exposure Information
Operation Safety Recommendations
Private Call
Radio Saftety Information and RF Radiation Information 4
Group Call
12
All Call
13
Color Code
13
Man Down
13
Alert Icon
Checking Items in the Package
Getting Started
Preparing Your Radio for Use
Call
12
12
Analog Conventional Functions and Operations 14
Calls on Analog Channels
14
Charging the Battery
CTCSS/CDCSS Type
14
Attaching the Battery
CTCSS
14
Attaching the Antenna
CDCSS
14
Attaching the Belt Clip
CDCSS Invert
14
Radio Controls
15
LED Indicator
10
Basic Operations
11
Optional Accessories
Troubleshooting
Limited Warranty
Warranty Card
Switching the Channel Mode
11
Setting the Programmable Buttons
11
Adjusting the Volume
11
Adjusting Power Level
11
Selecting a Channel
11
Selecting a Zone
11
Transmit Time-Out
11
16
17
19
Important Information
RF Energy Exposure Information
RF Energy Exposure Awareness And Control
Information For Fcc Occupational Use Requirements
Ibefore using the two-way portable radio, review the following important RF energy awareness and control information and operational
instructions. Comply with this information and instructions in order to ensure compliance with RF exposure guidelines.e the capability to
access information in that form.
This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure
and can exercise control over their exposure to remain below RF exposure limits. This radio is NOT authorized for
general population, consumer, or any other use.
Changes or modifications not expressly approved by Shenzhen Excera Technology Co., Ltd.could void the user's
authority to operate the equipment.
WARNING
CAUTION
This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more
users over a distance. It uses RF energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other
forms include, but are not limited to, electric power, sunlight, and x-rays. RF energy, however, should not be confused with these other
forms of electromagnetic energy, which, when used improperly, can cause biological damage. Very high levels of x-rays, for example, can
damage tissues and genetic material.
Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for exposure to RF energy.
These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure
levels include substantial margins of protection. All two-way radios marketed in North America are designed, manufactured, and tested to
ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions
to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple
procedures on how to control it. Refer to the following websites for more information on what RF energy exposure is and how to control
exposure to assure compliance with established RF exposure limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov./SLTC/radiofrequencyradiation/index.html
Important Information
Federal Communications Commission Regulations
Before it was marketed in the United States, the Digital portable radio was tested to ensure compliance with FCC RF energy
exposure limits for two-way portable radios. When two-way radios are used as a consequence of employment, the FCC requires
users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be
facilitated by the use of a
label directing users to specific user awareness information. The radio has an RF exposure product label.
Also, the Product Safety Manual and this Operator’s Manual include information and operating instructions required to control RF
exposure and to satisfy compliance requirements.
Operation Safety Recommendations
Occupational Safety Guidelines And Safety Training Information
To ensure bodily exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use. Always adhere to
the following basic guidelines:
• The push-to-talk button should only be depressed when intending to send a voice message.
• The radio should only be used for necessary work-related communications.
• The radio should only be used by authorized and trained personnel. It should never be operated by children.
• Do not attempt any unauthorized modification to the radio. Changes or modifications to the radio may cause harmful
interference and/or cause it to exceed FCC RF exposure limits. Only qualified personnel should service the radio.
• Hold the r adio in a vertical position in front of face with the microphon e (and the other parts of the radio, including the antenna)
at least one inch (2.5 cm) away from the nose. Keeping the radio at the proper distance is important because RF exposure
decrease with distance from the antenna. Antenna should be kept away from eyes. • When worn on the body , always place the
radio in a Excera’s approve d clip, holde holster, case, or body harness for this product. Using approved body-worn accessories is
important because the use of Excera’s or other manufacturer’s non-approved accessories may result in exposure levels, which
exceed the FCC’s occupational/controlled environment RF exposure limits.
Important Information
Radio Frequency Interference
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference; and,
2. This device must accept any interference received, including interference that may cause undesired operation.
Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
CAUTION:
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Adapter shall be installed near the equipment and shall be easily accessible.
The max operating of the device is 55℃.
The device has been tested and compliance with SAR limits, users can obtain Canadian information on RF exposure and compliance
Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur
l’exposition aux radiofréquen es et la conformité and compliance d’acquérir les informations correspondantes
EU Regulatory Conformance
As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of
the Directive 199/5/EC.Please note that the above information is applicable to EU countries only.
Hold the radio in a vertical position in front of face with the microphone at least one inch(2.5cm)away from the nose.
Keeping the radio at the proper distance is important because RF exposures decrease with distance from the antenna.Antenna should be kept away from eyes.
Important Information
Before using this product, please read this user manual carefully.
■
Alert Icon
Caution:
Indicates situations that could cause human injury or damage to your products.
Note:
Indicates tips that can help you make better use of your products.
Caution:
Checking Items in the Package
Please unpack carefully and check that all items listed below are received. If any item is missing or damaged,
please contact your dealer.
Radio
Battery
Charger
Strap
User
Power Adapter
Antenna
Belt Clip
Man
ual
User Manual
Getting Started
■
LED Indicator
Preparing Your Radio for Use
Charging the Battery
For best performance, your radio is powered by an
Excera manufactured Lithium-Ion (Li-Ion) battery. To
avoid damage and comply with warranty terms, charge
the battery using the charger contained in the package.
Charging Diagram
Charger Status
LED flashes red slowly.
Standby (no load)
LED glows red.
Charging
LED glows orange.
90% charged
LED glows green.
Fully charged
LED flashes red rapidly.
Failure
LED Indicator
Procedure
1. Plug the power adapter into the rear jack of the charger.
See arrow ①.
2. Connect the power adapter to AC socket. See arrow ②.
3. Place the radio with the battery attached, or the battery
alone, into the charger. See arrow ③.
The charging process begins when the charger LED glows red
and is completed when the LED glows green.
Getting Started
Attaching the Battery
1. Align the battery with the rails on the rear of the radio as
shown by arrow ①.
2. Slide the battery upward to the top of the rails and snap
the latch into place as shown by arrow ②.
Note: You need to turn off the radio prior to attaching or
removing the antenna.
To remove the battery, turn off the radio first. Move the
battery latch into unlock position and hold, and slide the
battery down and off the rails.
Attaching the Antenna
To attach the antenna, set the antenna in its receptacle and
turn clockwise.
To remove the antenna, turn the antenna counterclockwise.
Attaching the Belt Clip
1. Remove the screws.
2. Align the screw holes on the belt clip with those on the
radio’s body, and then tighten the screws.
Getting Started
■
Radio Controls
Part Name
No.
No.
Part Name
No.
Part Name
SK1 (Side Key 1)
LED Indicator
TK (Top Key)
PTT Key
SK2 (Side Key 2)
Channel Selector Knob
Microphone (Half Duplex)
Speaker
Microphone (Full Duplex)
Accessory Jack
Belt Clip
Radio On-Off/Volume Control Knob
Antenna
Battery
Getting Started
■
LED Indicator
LED Indicator
Radio Status
LED flashes green rapidly.
Upgrading or powering on
LED glows green.
Receiving
LED flashes red slowly.
Low battery
LED flashes red rapidly.
None
LED glows red.
Transmitting
LED flashes orange slowly.
Scanning
LED flashes orange rapidly.
None
LED glows orange.
10
No voice is being transmitted
or received on the traffic
channel after a call is
established. Within such
period, you can hold down
the PTT key to talk.
Basic Operations
■
Switching the Channel Mode
This radio can operate in either digital or analog
conventional mode.
Each channel can be programmed as either analog or
digital channel via the CPS. If the current zone includes
a mixture of analog and digital channels, you may
quickly switch between digital and analog through the
Channel Selector knob.
■
Setting the Programmable Buttons
You may set the programmable buttons (SK1, SK2, and
TK) as shortcuts to radio functions (such as power level
switch, zone switch, or squelch level) using the CPS.
■
Adjusting the Volume
After turning the radio on or during a call, rotate the
Radio On-Off/Volume Control knob clockwise to
increase the call volume, or counterclockwise to
decrease it.
■
Adjusting Power Level
With this option, you may toggle power levels quickly.
We recommend you to adopt low power for battery
saving. However, if you cannot communicate with
radios located at a distant place with low power, please
select high power.
■
Selecting a Channel
After turning the radio on, rotate the Channel Selector
knob to select a desired channel. In the process, you
will hear the sequence number of the selected channel
in the Zone Member list.
■
Selecting a Zone
A zone is a group of channels exhibiting the same
property. The radio supports 32 zones and each zone
contains 16 channels at most.
You may quickly toggle to your desired zone by
pressing the programmed Zone Up or Zone Down key.
■
Transmit Time-Out
The purpose of Transmit Time-Out is to prevent any
user from occupying a channel for an extended period.
If the preset time expires, the radio will automatically
terminate the transmission.
You may set the time via the CPS.
11
Digital Conventional Functions and Operations
■
Call
Group Call
To ensure that your speech is clear, keep the
microphone 2.5 to 5 cm from your mouth.
A group call refers to a call from an individual radio to a
group of radios.
Private Call
Making a Group Call
A private call is a call from an individual radio to another
individual radio.
In standby mode, hold down the PTT key to make a
group call to the group call contact preset for the
current channel.
Making a Private Call
In standby mode, hold down the PTT key to make a
private call to the private call contact preset for the
current channel.
Receiving and Responding to a Private Call
When a private call is received, you can listen to it
without any operation and you may hold down the PTT
key within the preset time period to call back.
12
Receiving and Responding to a Group Call
When a group call is received, you can listen to it
without any operation and you may hold down the PTT
key within the preset time period to call back.
Late Entry
After a group call is established, it allows other group
members to join this call.
Late entry may occur in any of the following situations:
● The radio is powered on.
● The Channel Selector knob is rotated to the channel
in operation.
● The radio is within the communication coverage of
this group call.
Digital Conventional Functions and Operations
Color Code
Rx Group List
■
With this option, you can receive multiple group calls on
a digital channel.
A Rx group list contains a maximum of 32 group
contacts. You can set up to 32 Rx group lists using the
CPS, each of which can be associated with a digital
channel.
Color code is used to identify a system. Users who wish
to communicate with each other are assigned with the
same color code. A radio ignores the channel activity
which does not match the preset color code in this field,
as it assumes the activity belongs to other systems.
You may set this feature via the CPS.
All Call
■
An all call is a call from an individual radio to every
radio on the channel.
Once this feature is activated, if you radio tilts to a
specified gradient and is not placed upright within Man
Down Delay Time, it will enter the emergency mode.
This feature will be valid if is checked in the CPS.
Note: The All Call ID is fixed and is set via the CPS.
Man Down
Making An All Call
In standby mode, hold down the PTT key to make the all
call to the all call contact preset for the current channel.
13
Analog Conventional Functions and Operations
■
Calls on Analog Channels
To transmit on an analog channel, hold down the PTT
key and speak into the microphone. To receive, release
the PTT key.
■
CTCSS/CDCSS Type
This option allows you to configure the current channel
with a specific Rx CTCSS/CDCSS type. When the radio
receives the signal, it will distinguish whether the
received signal is CTCSS or CDCSS, and check out
whether it matches the predefined CTCSS/CDCSS for
the current channel before processing.
Three types are available: CTCSS, CDCSS, and
CDCSS Invert.
Note: CDCSS is also known as DCS.
CTCSS
The radio checks for CTCSS match when receiving a
signal on the current channel.
Follow the procedure below to set CTCSS/CDCSS Type
to CTCSS.
Procedure:
1. Log in to the CPS.
14
2. Go to “Conventional -> Channel –> Analog Channel
-> Selected Analog Channel” and set Rx/Tx CTCSS
/CDCSS Type to CTCSS.
CDCSS
The radio checks for CDCSS match when receiving a
signal on the current channel.
Follow the procedure below to set CTCSS/CDCSS Type
to CDCSS.
Procedure:
1. Log in to the CPS.
2. Go to “Conventional -> Channel –> Analog Channel
-> Selected Analog Channel” and set Rx/Tx CTCSS
/CDCSS Type to CDCSS.
CDCSS Invert
The radio checks for an invert CDCSS match when
receiving a signal on the current channel.
Follow the procedure below to set CTCSS/CDCSS Type
to CDCSS Invert.
Procedure:
1. Log in to the CPS.
2. Go to “Conventional -> Channel –> Analog Channel
-> Selected Analog Channel” and set Rx/Tx CTCSS
/CDCSS Type to CDCSS Invert.
Optional Accessories
The following items are the main optional accessories for the product. Consult your local dealer for more other accessories.
Programming Cable
EPC01
Police Full Bone
Conduction Headset
EEBN011
Wireless PTT
EPTTB01
Fireman Full Bone
Conduction Headset
EEBN021
Bluetooth Headset
EEWB03E
1-Wire Earpiece with
Transparent Acoustic Tube
EEAN011
Remote Speaker
Microphone
EMRN011
2-Wire Earpiece with
Transparent Acoustic Tube
EEAN021
C-Shell Earset
EEHN011
Multi-unit Charger
EMC702L
Caution: Use the accessories specified by the Company only. Otherwise, the Company shall not be liable for losses
or damages arising out of use of unauthorized accessories.
15
Troubleshooting
Phenomena
The radio cannot be
powered on.
Solution
Analysis
The battery may be improperly installed.
Remove the battey and attach it again.
The battery may run out.
Recharge or replace the battery.
The battery may suffer from poor contact
caused by dirty or damaged battery contacts.
Clean the battery contacts. If the problem cannot be solved, contact your
dealer or authorized service center for inspection and repair.
The radio may not detect signals from the
base station.
Make sure you are within the coverage of the base station.
The radio may not be authorized.
Contact the base station manager to check whether you are an authorized
subscriber in the network management system.
The radio registers repeatedly.
The signal is discontinuous.
Make sure you are within the coverage of the base station.
The radio cannot establish a
call.
No voice is heard after a call
is established.
The called party disconnects
repeatedly during communication.
The signal is poor.
Make sure you are within the coverage of the base station.
Your ID may be repeated.
Contact the base station manager to check whether your ID is repeated in the
network management system.
The radio cannot register
successfully.
During receiving, the voice is
weak, discontinuous, or totally
inactive.
The signal is discontinuous.
Make sure you are within the coverage of the base station.
Low battery
Recharge or replace the battery.
The volume may be set to a low level.
Increase the volume by rotating the Volume Control knob clockwise.
The antenna may get loose or improperly
installed.
Power off the radio, reinstall the antenna and power on the radio again.
The speaker may be blocked or damaged.
Clean surface of the speaker. If the problem cannot be solved, contact your local
dealer or authorized service center for inspection and repair.
You cannot communicate with
other members.
The signal is poor.
Make sure you are within the communication range.
The voice is unclear.
The signal is poor.
Make sure you are within the communication range.
The signal is poor.
Make sure you are within the communication range.
The noise is too loud.
You may be at an unfavorable position. For
example, your communication may be blocked
by high buildings or frustrated in the
underground areas.
You may suffer from external disturbance
(such as electromagnetic interference).
Move to an open and flat area and restart the radio.
Stay away from equipment that may cause interference.
If the above solutions cannot fix your problems, or you may have some other queries, please contact us or your local dealer for more technical support.
16
Limited Warranty
What This Warranty Covers and for How Long
Shenzhen Excera Technology Co., Ltd. warrants the Excera manufactured products listed below against defects in material and
workmanship under normal use and service for a period of time from the date of purchase as scheduled below:
EP8000 Digital Portable Radios
Two Years
Accessories
Six Months
How to Get Warranty Service
You must provide a completely filled warranty card, purchase invoice, and receipt in order to get warranty services. The purchase
invoice or receipt should indicate the radio, accessories, radio serial number, purchase date, and purchase amount.
What This Warranty Does Not Cover
1.
2.
3.
4.
5.
6.
7.
Defect or damage resulting from use of the product in other than its normal and customary manner
Defect or damage caused by unauthorized product disassembly, repair, or modification
Damage due to force majeure, such as flood, lightning strike, earthquake, tsunami, fire, and abnormal voltage
Product that does not have a valid warranty certificate, such as warranty card, purchase invoice, or receipt
Product which has had the serial number and the tamper-proof label removed or made illegible
Normal and customary wear and tear
Rechargeable batteries if:
(1) any of the seals on the battery enclosure of cells is broken or shows evidence of tampering.
(2) the damage or defect is caused by charging or using the battery in equipment or service other than the product for which
it is specified.
17
Warranty Card
Purchase Information
Customer Name:
Customer Phone:
Please tear from the Dotted line
Customer Address:
Purchase Date:
Radio Information
Model Number:
Serial Number:
Note:
●
●
●
This warranty card applies to after-sale and maintenance services for the product and accessories described above.
You must provide this warranty card and purchase invoice in order to get warranty services.
The Company does not assume liability for damages caused by human factors. For more details, contact your local dealer.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : 谢婷
Create Date                     : 2016:04:12 09:26:41+08:00
Modify Date                     : 2016:06:17 19:09:27-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : 谢婷
Title                           : 未命名 -1
Creator Tool                    : CorelDRAW X6
Metadata Date                   : 2016:06:17 19:09:27-07:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Document ID                     : uuid:2af5660d-42ae-4989-8db1-fc6c4b6c71ec
Instance ID                     : uuid:25578528-f237-447e-939b-4bc4b38cefba
Page Count                      : 20

EXIF Metadata provided by EXIF.tools