Ezurio 01B The Intelligent Bluetooth Serial Module Version II User Manual

Ezurio Ltd The Intelligent Bluetooth Serial Module Version II BISM2 Data Sheet v0 9

a href="https://usermanual.wiki/Ezurio" itemprop="url"> Ezurio >

Contents

User Guide

www.ezurio.com © Ezurio Ltd 2005 1 BISM2 Bluetooth™ Version 2.0 Serial Module 1. General Description Ezurio’s BISM2 Bluetooth Serial Module is a fully integrated and qualified Class 1 Bluetooth solution designed for lowest cost of integration and ownership for designers wishing to incorporate Bluetooth functionality into their products. The module is qualified to Bluetooth Version 2.0. The BISM2 Module is based on Cambridge Silicon Radio’s BlueCore 04 chipset. The module contain all of the hardware and firmware for a complete Bluetooth solution, requiring no further components. The Module has an integrated, high performance antenna which is matched with the Bluetooth RF and baseband circuitry. The firmware integrated into the BC04 chipset implement the higher layer Bluetooth protocol stack, up to and including the Generic Access Profile (GAP), Service Discovery Profile (SDAP), Serial Port Profile (SPP), Dial Up Networking Profile (DUN) and Audio Gateway. A virtual processor is used within the BC04 to implement an AT command processor. This interfaces to the host system over a straight forward serial port using an extensive range of AT commands. The AT command set abstracts the Bluetooth protocol from the host application, saving many months of programming and integration time. It provides extremely short integration times for data oriented cable replacement and voice applications. A low cost development system is available for fast product evaluation and development. An alternative version of firmware is available that provides programming support for multi-point applications. The Module can be configured so that it can be attached to a ‘dumb’ terminal or attached to a PC or PDA for cable replacement applications. In addition to the Bluetooth functionality, The BISM2 Module provides access to 8 General I/O lines and 2 analogue I/O lines. These can be configured to provide connection to simple devices such as switches or LEDs without requiring any external processing. Both the GPIO and ADC lines can be accessed either via the wired host UART connection, or remotely over the Bluetooth link. The BISM2 module is supplied in a small form factor pcb (25mm x 35mm x 10mm), that connects to a main pcb using a 40 way Hirose connector. The module includes a high sensitivity, high gain antenna which provides excellent range. Typical open field performance provides ranges of over 250 metres at transmit powers of only 4mW. Support is provided for low power modes that make the BISM2 particularly applicable to battery powered installations. The BISM2 module is Lead-free and is RoHSA compliant and supports an industrial temperature range of -40°C to +85°C. 1.1 Applications • POS Equipment • Medical Equipment • Telematics • Voice Applications • Industrial Automation • Automotive Applications Bluetooth is a trademark owned by Bluetooth SIG, Inc., USA, and is licensed to Ezurio Ltd
Download:
Mirror Download [FCC.gov]
Document ID565453
Application IDFo5tQ3g0xW2YQvh+8T7crQ==
Document DescriptionUser Guide
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize90.05kB (1125664 bits)
Date Submitted2005-07-26 00:00:00
Date Available2005-07-26 00:00:00
Creation Date2005-07-05 11:07:27
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2005-07-05 11:07:27
Document TitleMicrosoft Word - BISM2 Data Sheet v0.9.DOC
Document CreatorPScript5.dll Version 5.2
Document Author: rg
FCC ID Filing: PI401B

Navigation menu