FAMMAX MT-1501A LCD MONITOR WITH TV TUNER User Manual
FAMMAX CO., LTD. LCD MONITOR WITH TV TUNER
FAMMAX >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 133915 |
| Application ID | /DayEKOJp803GJVbvlm/+A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 117.77kB (1472147 bits) |
| Date Submitted | 2001-01-24 00:00:00 |
| Date Available | 2001-01-24 00:00:00 |
| Creation Date | 2000-12-06 12:17:12 |
| Producing Software | Acrobat Distiller 4.0 for Macintosh |
| Document Lastmod | 2000-12-18 11:16:11 |
| Document Title | User Manual |
neovalley-common 12/6/00 12:08 PM Page 1 User’s Manual 15.1'' TFT LCD Monitor TV neovalley-common 12/6/00 12:08 PM Page 2 15.1'' TFT LCD Monitor TV Copyright and Trademark Notice NO part of this documant may be copied, photocopied, reproduced and translated without the prior written consent of manufacturer. This company reserves the right to revise this publication and to make change from time in the contents without obligation of this company to notify a person of such revision or changes. All brand or product names are trademarks or registered trademarks of their respective companies. NV-151T neovalley-common 12/6/00 12:08 PM Page 4 Contents Safety Instructions .............................................................3 Regulatory Information...................................................4~5 General safty precautions ..................................................6 Parts Description Front Panel..........................................................................7 Rear Panel ..........................................................................8 Remote Control Unit .....................................................9~10 MENU TREE .......................................................................11 Connecting a PC ...............................................................12 Viewing a PC screen Initial set PC mode............................................................13 When the picture is unstable ............................................13 Adjusting the Picture settings............................................14 Adjusting the Sound settings.............................................15 Adjusting the Geometry settings .......................................16 PC Stable Adjustment .......................................................17 Connecting to watch TV or VCR Connecting the Aerial or Cable Television Network ..........18 Connecting the VCR, DVD or Other External Devices .....18 Viewing a TV/VCR screen Adjusting the Picture Settings ...........................................19 Adjusting the Sound Settings ............................................20 Channel Memory (PAL model) Storing the Channel Automatically ...................................21 Storing the Channel Manually.....................................22~23 Fine Tuning Channel Reception ......................................24 Skipping Unwanted Channels...........................................25 Selecting the Broadcast Source........................................26 Channel Memory (NTSC model) Storing Channels in Memory Automatically ......................27 Adding and Erasing Channels...........................................27 Teletext (Option) Teletext Decoder ...............................................................28 Displaying Teletext Information .........................................28 Teletext Decoder ...............................................................29 Appendix Power Saver......................................................................30 Troubleshooting...........................................................31~32 Specification......................................................................33 Display Modes...................................................................34 neovalley-common 12/6/00 12:08 PM Page 6 Safety Instructions Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corresponds to the local electrical supply. Never insert anything metallic into the cabinet openings of the Liquid Crystal Display (LCD) monitor: doing so may create the danger of electric shock. To avoid electric shock, never touch the inside of the LCD monitor. Only a qualified technician should open the case of the LCD monitor. Never use your LCD monitor if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away from areas where people can trip over it. Be sure to hold the plug, not the cord, when disconnecting the LCD monitor from an electric socket. Openings in the LCD monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the LCD monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the LCD monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation. Put your LCD moniter in a location with low humidity and a minimum of dust. Do not expose the LCD monitor to rain or use it near water (in kitchen, near swimming pool, etc.). If the LCD monitor accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the LCD monitor with a damp cloth when necessary, but be sure to unplug the LCD monitor first. Place the LCD monitor on a solid surface and treat it carefully. The screen is made of thin glass with a plastic front surface and be damaged if dropped, hit or scratched. Do not clean the front panel with keton-type materials (e.g., acetone), ethyl alcohol, toluene, ethylacid, methyl, or chloride - these may damage the panel. Locate your LCD monitor near an easily accessible AC outlet. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Regulatory Information European Notice produsts with the CE Marking comply with both the EMC Directive (89/336/EEC),(93/68/ECC) and the Low Voltage Directive(72/23/ECC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: EN55022:1998-Radio Frequency Interference EN55024:1998-Electromagnetic Immunity EN61000-3-2:1995 + A1 + A2 - Power Line Harmonics EN61000-3-3:1995 - Voltage Fluctuations EN60950-Product Safety FCC Information User Instructions The Federal Communications Radio Frequency Interference Statement includes the following warning: NOTE : This equipment has been tested and found to comply with limits for a Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television receptions, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet of a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. User Information Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If necessary, consult your dealer or an experienced radio/TV technician for additional suggestions. You may find the booklet called How to Identify and Resolve Radio/TV Interference Problems helpful.This booklet was prepared by the Federal neovalley-common 12/6/00 12:08 PM Page 8 Regulatory Information Communications Commission. It is available from the U.S. Goverment Printing Office, Washington,DC 20402, Stock Number 004-000-00345-4. Warning User must use shielded signal interface cables to maintain FCC compliance for the product. Declaration of conformity for products Marked with FCC Logo This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Provided with this monitor is a detachable power supply cord with IEC320 style terminations. It may be suitable for connection to any UL Listed personal computer with similar configuration. Before making the connection, make sure the voltage ration of the computer convenience outlet is the same as the monitor and that the ampere rating of the computer convenience outlet is equal to or exceeds the monitor voltage ration. For 120 Volt applications, use only UL Listed detachable power cord with NEMA configuration 5-15P type(parallel blades) plug cap. For 240 Volt applications use only UL Listed Detachable power supply cord with NEMA configuration 6-15P type(Tandem blades) plug cap. General safty precautions This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following: Do not place anything heavy, wet or magnetic on the monitor or the power cord. Never cover the ventilation openings with any material and never touch them with metallic or inflammable materials. Avoid operating the monitor in extreme heat, hummidity or areas affected by dust. Tenperature : 5~35°C Humidity : 30~80RH Be sure to turn the monitor off before plugging the power cord into the socket. Make sure that the power cord and the other cords are securely and correctly connected. Overloaded AC outlets and extension cords are dangerous, as are frayed power cords and broken plugs, which may cause electric shock or fire. Call your service technician for replacement. Do not use sharp tools such as a pin or a pencil near the monitor, as they may scratch the LCD surface. Do not use a solvent, such s benzene, to clean the monitor, as it will damage the LCD surface. neovalley-common 12/6/00 12:09 PM Page 10 Parts Description Parts Description Front Panel Rear Panel Rear Panel Jacks 2 3 SPEAKER MENU VOL , CH VHF/UHF ANTENNA JACK Connect to an antenna or a cable TV system. , VOL 1 POWER Jack POWER Switches the Set off (standby made) and on. Display the main on-screen menu. Exit from sub-menu. CH Press CH or CH to change channels. Also used to highlight selections on the on-screen menus. SELECT Select input signal or select submenu of the on-screen menu. To input DC power from power outlet. (PAL Model) SCART audio/video connector. Used to connect a video signal from a personal computer Accessary 5 AUDIO OUTPUT Connects to the audio input port of an additional device. 6 AUDIO INPUT Audio signals from VCR or similar device. S-Video signal from an S-VHS VCR or laserdisc player. Power Cable 2 SCART 4 S-VIDEO IN DC power Supply/Adapter 3 PC VIDEO INPUT Press the increase or decrease the volume. Also used to increase or reduce the value of a menu option. Remote Controller 15-pin D-Sub Signal Cable 7 VIDEO INPUT Video signals from VCR or similar device. 8 PC AUDIO INPUT Connects to the sound-output port of a personal computer. User’s Manual neovalley-common 12/6/00 12:09 PM Page 12 Reomote Control Unit (Teletext function is optional) Remote Control Unit (Teletext Function is optional) 1 POWER 11 Select / Store Turns the TV On and Off. 10 Select submenu of the on-screen menu. Store teletext page (Option) 2 Numeric buttons Direct channel select. Direct page select during teletext display(option) 3 MENU Displays ‘On Screen Menu. 4 VOL 11 12 13 14 15 16 5 I / II (MTS) Press to choose stereo, dual or mono. 6 MUTE Press to temporarily cut of the sound. Display teletext or mix with TV screen.(Option) 17 18 , CH Press CH or CH to change channels. Also used to highlight selections on the on-screen menus. Select the channel providing the teletext service. 13 -/-- (+100) / REVEAL , VOL Press the increase or decrease the volume. Also used to make selections on the on-screen menus. 7 TELETEXT MIX 12 CH 8 INFORMATION / Display teletext information.(Option) Press to select channels over 100 or one/two digit channel selection. Select hidden content during teletext display (Option) 14 VID / S-VID Press to display all of the available video sources (i.e., VIDEO, SVIDEO, PC and Antenna). 15 HOLD Hold Function during teletext display (Option) 16 FLOF / LIST Exchange FLOF / LIST mode. 17 FAST TEXT 9 TV / Inserting the Batteries in the Remote Controller You must insert or replace the batteries in the remote controller when you: Purchase the set. Find that the remote controller is no longer operating correctly. Directly access teletext linked page. 18 SUB-PAGE To display a secondary page. 10 PC Select PC signal. Remove the cover of the remote conInsert 2 batteries(AA size), taking care to Replace the cover by pushing it in the troller by pressing the symbol and pulling respect the polarities. direction of the arrow. the cover space in the direction of the arrow. You can use your remote controller within a distance of 7~10m and an angle of 30 degrees from the left and right sides of the remote controller receptor of your monitor. Select TV signal. Teletext Off(Option) 10 neovalley-common 12/6/00 Menu Tree 11 12:09 PM Page 14 Connecting a PC Turn off your computer and monitor Connect a PC D-Sub cable between your PC and PC-VIDEO-IN of the monitor. And then fasten the screws of both sides of the cable. Connect a PC Audio Cable between the Sound Output jack of the sound card on a PC and the PC-AUDIO-IN of the monitor. Connect a DC Power unit cable to the Power jack on the rear of your monitor. And connect a power cable to the DC Power unit before connecting to a power outlet. Power on the computer before turning on the monitor. 12 neovalley-common 12/6/00 12:09 PM Page 16 Viewing a PC screen Viewing a PC screen Initial set PC mode Adjusting the Picture Settings Power on your monitor by pressing the POWER button on the main set or on the remote controller. Use the PC button on the remote controller to switch to the PC mode. Then the PC screen is automatically set. When a CD-Title runs, the music is output from speakers. (You can use an external speaker via the Audio Output jack on the rear of the main set.) When the picture is unstable Press the MENU button and the PICTURE menu is displayed. Use the VOL or VOL Function menu. Use the CH or CH button to move to TRACKING, then press the SEL button. Then, the TRACKING menu will be displayed. 13 Your monitor has several settings which allow you to control picture quality: CONTRAST , BRIGHTNESS, COLOR TEMPERATURE Press the MENU button. R e s u l t : The PICTURE menu is displayed. Use the CH or CH buttons to select one of the following options: CONTRAST BRIGHTNESS COLOR TEMPERATURE Press the SEL button. Press the VOL or VOL buttons to suit your personal preference. CONTRAST : Adjust the brightness and darkness between objects and back grounds. button to move to the Move to Auto Tracking, then press the SELECT button. Then, the message “AUTO TRACKING PROCESSING...” appears on the screen to stabilize the screen. BRIGHTNESS : Adjust the overall of the screen brighter or darker. COLOR TEMPERATURE : The tone of color can be changed from redish white to bluish white. Press the MENU button repeatedly until the menus disappear. Press the MENU button repeatedly until the menus disappear. 14 neovalley-common 12/6/00 12:09 PM Page 18 Viewing a PC screen Viewing a PC screen Adjusting the Sound Settings Adjusting the Geometry Settings The sound settings can be adjusted to suit your personal preference : TREBLE, BASS, BALANCE, S.MODE Press the MENU button. R e s u l t : The PICTURE menu is displayed. Use the VOL or VOL SOUND menu. Use the CH or CH following options: TREBLE BASS BALANCE S.MODE Press the SEL button. Press the VOL or VOL buttons to suit your personal preference. S.MODE / MTS : To select STEREO or MONO buttons to move the buttons to select one of the The geometry settings can be adjusted to center your viewing screen. Press the MENU button. R e s u l t : The PICTURE menu is displayed. Use the VOL , VOL GEOMETRY menu. Use the CH or CH following options: HPOSITION VPOSITION AUTO POSITION Press the SEL button. Press the VOL or VOL position of screen. buttons to move the buttons to select one of the buttons to adjust the If the position of screen is horizontally off-centered, use H-POSITION. If the position of screen is vertically off-centered, use V-POSITION. Press the MENU button repeatedly until the menus disappear. Use the AUTO POSITION to position the screen to be horizontally and vertically centered automatically. 15 Press the MENU button repeatedly until the menus disappear. 16 neovalley-common 12/6/00 12:09 PM Page 20 Connecting to watch TV or VCR Viewing a PC screen PC Stable Adjustment Connecting the Aerial or Cable Television Network When the screen is unstable in PC settings, or to make your PC stable by adjusting the Clock and Phase, set the PC in the following sequence: Press the MENU button. R e s u l t : The PICTURE menu is displayed. Use the VOL , VOL FUNCTION menu. Cable television network Use the CH button move to TRACKING and then press the SEL button. R e s u l t : The TRACKING menu is displayed. Use the CH or CH following options: AUTO TRACKING CLOCK PHASE To adjust the.. AUTO TRACKING CLOCK PHASE 17 buttons to move the AIR buttons to select one of the To view television channels correctly, a signal must be received by the set from one of following sources : An outdoor aerial An indoor aerial (not recommendable) A cable television network 1. In the first three cases, connect the aerial or network input cable to the 75 ohm coaxial socket on the bottom of the television. 2. Press the TV mode button on the remote controller. Connecting the VCR, DVD or Other External Devices 1. Connect video and audio cable according to the shape and color of the video / audio cable. (SCART jack, RCA jacks) When an external devices is in MONO, the audio connection cable can be connected to either the left and S.MODE/MTS should be set FM MONO/MONO. Press the... SEL button. VOL or VOL VOL or VOL 2. For optimal visual image, use S-VIDEO connector instead of video (yellow) connector. If RCA jack is connected together with SCART jack, RCA jack has priority. button. button. AUTO TRACKING : Automatically optimizes the status of screen. This is recommanded to perform for new PC. CLOCK : Adjusts the horizontal size of screen by increasing / decreasing the number of pixels. PHASE : Sets the focus of screen. Adjusts when some noise exists or the character lines are seen overlapped. Press the MENU button repeatedly until the menus disappear. 18 neovalley-common 12/6/00 12:09 PM Page 22 Viewing a TV/VCR Screen Viewing a TV/VCR Screen Adjusting the Picture Settings Adjusting the Sound Settings Your TV have several settings which allow you to control picture quality: CONTRAST , BRIGHTNESS, SHARPNESS, COLOR, TINT The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE, S.MODE / MTS Press the MENU button. R e s u l t : The PICTURE menu is displayed. Press the MENU button. R e s u l t : The PICTURE menu is displayed. Use the VOL , VOL SOUND menu. Use the CH or CH following options: Use the CH or CH following options: buttons to select one of the CONTRAST BRIGHTNESS SHARPNESS COLOR TINT (NTSC model) buttons to move the buttons to select one of the TREBLE BASS BALANCE S.MODE (PAL model) MTS (NTSC model) Press the SEL button. Press the VOL or VOL personal preference. Press the MENU button repeatedly until the menus disappear. buttons to suit your Press the SEL button. Press the VOL or VOL buttons to suit your personal preference. S.MODE : Descrip below (PAL model) NICAM Stereo Type of broadcast Regular broadcast (Standard audio) Regular + NICAM Mono NICAM Stereo NICAM Dual-I/II A2 Stereo Regular broadcast (Standard audio) Bilingual or Dual-I/II Stereo On-screen Indlcation Mono (Normal use) Mono Nicam Stereo Nicam Dual-I Nicam Mono (Normal) Momo (Normal) Mono (Normal) Dual-II Nicam Mono (Normal use) Dual-I Stereo Dual-II Mono (Forced Mono) MTS : To select STEREO, SAP or MONO (NTSC model) 19 Press the MENU button repeatedly until the menus disappear. 20 neovalley-common 12/6/00 12:09 PM Page 24 Channel Memory (PAL model) Channel Memory (PAL model) Storing the Channels Automatically Storing the Channel Manually You can scan the frequency ranges available on your television in your country and store all the channels found automatically. The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not correspond to those by which you wish to identify the channels. If this is the case, you can then sort them manually. When storing channels manually, you can choose: whether or not store each of the channels found. The number by which you wish to identify each stored channel. Press the MENU button. R e s u l t : The picture menu is displayed. Press the MENU button. R e s u l t : The PICTURE menu is displayed. Use the VOL or VOL FUNCTION menu. Press the VOL button to place the selection bar on the FUNCTION menu. Press the CH button to place the selection bar on the TUNING mode. And press the SEL button. Press the CH or CH button to select the TUNING option and press the SEL button. R e s u l t : The tuning menu is displayed. Press the CH or CH button to move the COLOR SYSTEM and press the SEL button. Press the VOL or VOL button repeatedly until the COLOR SYSTEM is of the best quality. R e s u l t : The COLOR SYSTEM is changed. PAL-> SECAM-> AUTO Press the MENU button. R e s u l t : The tuning menu is displayed. Press the CH button to move the SOUND SYSYEM and press the SEL button. Press the VOL or VOL button repeatedly until the SOUND SYSTEM is of the best quality. R e s u l t : The sound system is changed. BG DK 21 Press the CH button to place the selection bar on the AUTO TUNING and press the SEL button. R e s u l t : The AUTO TUNING will store found channel automatically. White the AUTO TUNING is progressing, the TV will change channels up to 99. When searching and storing is completed, the SORT menu is displayed. User can exchange favorite channels to prefered channel number. Press the VOL or VOL channel is shown. buttons to move the button until favorite Press the CH button to place the selection bar on the TO option. Press the VOL or VOL until the new number by which you wish to identify the channel is displayed. When searching and storing is complete, press the MENU button repeatedly until the menus disappear. 22 neovalley-common 12/6/00 12:09 PM Page 26 Channel Memory (PAL model) Channel Memory (PAL model) Fine Tuning Channel Reception Press the MENU button. 10 Press the CH or CH buttons to move the MANUAL TUNING and press the SEL button. 11 To assign a program number to the channel, press the CH or CH button until you find the correct number. 12 Press the VOL or VOL If the reception is clear, you do not fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distored, you may have to fine-tune the channel manually. Press the MENU button. R e s u l t : The PICTURE menu is displayed. Use the VOL or VOL FUNCTION menu. Press the CH or CH button to select the TUNING option and press the SEL button. R e s u l t : The tuning menu is displayed. Press the CH or CH button to move the FINE TUNING and press the SEL button. When a channel is right viewed by using the VOL or VOL buttons, the Tuning is automatically set. Press the MENU button repeatedly until the menus disappear. button to start the search. 13 Press the Menu button when the screen is fine tuned and the data will be automatically stored in memory. 14 Repeat steps 10~13 for each channel to be stored. 15 When you have finished manual storage, press the MENU button repeatedly to return to normal viewing. 23 buttons to move the 24 neovalley-common 12/6/00 12:09 PM Page 28 Channel Memory (PAL model) Channel Memory (NTSC model) Skipping Unwanted Channels You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. 25 Press the MENU button. R e s u l t : The : PICTURE menu is displayed. Use the VOL or VOL FUNCTION menu. Press the CH or CH button to select the TUNING then press the SEL button. R e s u l t : The TUNING menu is displayed. Use the CH or CH buttons to select AIR/CATV then press the SEL button. If antenna is connected, leave it as AIR displayed. If cable connected, press the VOL or VOL buttons to select STD. buttons to move the Press the CH or CH button to select the TUNING option and press the SEL button. R e s u l t : The tuning menu is displayed. Press the CH or CH button to move the CH SKIP and press the SEL button. Press the CH or CH required channel. Selecting the Broadcast Source Before memorizing available channels, you must select what broadcat source your TV is connected to either an antenna or a cable system. Press the MENU button. Use the VOL or VOL FUNCTION menu. Your TV can memorize and store all of the channels available. Once the channels are menorized, you can use the CH , CH buttons to scan through the available channels. button to select the To add or erase the desired channel by pressing the VOL or VOL VOL :ERASE , VOL :ADD Press the MENU button repeatedly until the menus disappear. buttons to select the 26 neovalley-common 12/6/00 12:09 PM Page 30 Channel Memory (NTSC model) Teletext (Option) Storing Channels in Memory Automatically First, select the broadcast source as described on the previous page. With the TUNING menu on screen, move the CH button down to select AUTO TUNING. Teletext Decoder Most television channels carry “teletext”, pages of written information that provide information such as : Television programme tables News bulletins Weather forecasts Sports results Subtitles for the hard of hearing Press the SEL button. The TV will begin memorizing all of the available stations. The teletext pages are organized according to six categories: Adding and Erasing Channels Part contents Selected page number. Broadcasting station identity. Current page number or search status. Date and time. Text. Status information. Use the numeric buttons to select the channel you want to add or erase. To add a channel or erase channel, press the MENU button. Use the VOL or VOL FUNCTION menu. Use the CH or CH buttons to select TUNING then press SEL button. R e s u l t : The TUNING menu is displayed. Use the CH or CH buttons to select MANUAL TUNING then press the SEL button. Using the ( ) or ( ) button, select the channel providing the telext service. Use the VOL or VOL buttons to select. VOL : ERASE, VOL : ADD Press the menu button repeatedly until the menus disappear. Press the TTX/MIX ( / ) button to activate the teletext mode. R e s u l t : The contents page is displayed. It can be redisplayed at any time by pressing the INDEX ( ) button. To display the actual broadcast simultaneously with the teletext page, press the TTX/MIX( / ) button. To return to normal viewing, press the TV( buttons to select the Displaying Teletext Information You can watch teletext information at any time, but signal reception must be good. Otherwise: Information may be missing. Some pages may not be displayed. To activate the teletext mode and display the contents page : 27 )button. 28 neovalley-common 12/6/00 12:09 PM Page 32 APPENDIX A : Power Saver Teletext (Option) This monitor has a built-in power management system called Power saver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain period of time. The available modes are “On”, “Standby”, “Sleep” and “Deep Sleep”. Power Saver operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. See below table for details. Teletext Decoder Press the numeric buttons on the remote controller to enter the page number directly: Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. R e s u l t : The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the HOLD ( ). Press the HOLD again to resume. Horizontal Sync Vertical Sync Video Power Indicator Power Consumption Power-Saving Function mode (EPA / ENERGY 2000) Normal Operation Standby Mode Active Active Active Inactive Active Blanked Green Amber 30W (Max.) Less than 3W Sleep Mode Position A1 Deep Sleep Mode Postition A2 Active Inactive Blanked Amber Blinking (0.5 sec interval) inactive Inactive Blanked Amber Blinking (1 sec. interval) Less than 3W Less than 3W N O T E : This monitor automatically returns to normal operation when horizontal and vertical sync return. This occurs when you move the computer’s mouse or press a key on the keyboard. Using the various display options: To display... 29 Srate Press the ... Both teletext information and the mormal broadcast TTX / MIX ( Hidden text (answers to quiz games, for example) REVEAL ( The normal screen REVEAL ( ) again A secondary page, by entering its 4-digit number SUB-PAGE ( The next page PAGE UP ( The previous page PAGE DOWN ( FLOF / LIST select FLOF / LIST ( Store STORE ( 30 neovalley-common 12/6/00 12:09 PM Page 34 APPENDIX B : Troubleshooting APPENDIX B : Troubleshooting If you have a problem setting up or using your LCD monitor, you may be able to solve it yourself. Before contacting customer service, try the suggested actions that are appropriate to your problem. What you see... Reference Screen is blank and power indicator is off Ensure that the power cord is firmly connected and the LCD monitor is on. Connecting a PC, page 12. “CHECK CABLE OR SIGNAL” message Ensure that the signal cable is firmly connected to the PC or video sources. Ensure that the PC or video sources are turned on. Connecting a PC, TV or VCR, Page 12,18. Check the maximum resolution and the frequency of the video adaptor. Compare these values with the data in the Display Modes Timing Chart. PC Stable Adjustment, page 17. APPENDIX D:Display Modes page 34. The image is too light or too dark Adjust the Brightness and Contrast. BRIGHTNESS, page 14,19. CONTRAST. page 14,19. Horizontal bars appear to flicker, jitter or shimmer on the image Adjust the Clock function. Auto Tracking will clear it automatically. PC Stale Adjustment. page 17. “INVALID MODE” message Suggested Actions Adjust the Phase function and then adjust the Clock function. Auto Tracking will clear it automatically. Screen is blank and power indicator light is steady amber or blinks every 0.5 or 1 seconds The monitor is using its power management system. Move the computer’s mouse or press a key on the keyboard APPENDIX A : Power Saver, page 30. Image is not stable and may appear to vibrate Auto tracking will clear it automatically Check that the display resolution and frequency from your PC or video board is an available mode for your monitor. On your computer check : Control Panel, Display, Settings PC Stable Adjustment, page 17. Horizontal frequency Vertical frequency Maximum refresh rate 31 KHz - 69KHz 56Hz - 85Hz 1024 * 768 @85Hz Auto Position will set the best position automatically Adjust the horizontal and vertical position. AUTO POSITION, page 16. H-POSITION, page 16. V-POSITION, page 16. Reference Ensure that the audio cable is firmly connected to both the audio-in jack on your monitor and the audio-out jack on your sound card. Connecting a PC, TV or VCR, page 12,18. Check the volume level Adjusting the Sound settings, Check the volume level page 15, 20. If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program. Refer to your computer, sound card or software documentation. Sound is too high pitched or too low pitched Adjust the Treble and Bass to appropriate level. Adjusting the Sound Settings, page 15, 20. TV signal is not received Ensure that the antenna cable is firmly connected to the VHF/UHF jack. Conncting to watch TV or VCR, page 18. No sound Sound level is too low Check “Channel Memory” and make sure you choose the correct channel system.(PAL Model) Select “Auto Tuning” to configure the channel system automatically.(PAL Model) Vertical bars appear to flicker, jitter or shimmer on the image. Image is not centered on the screen. 31 Suggested Actions Problem Check AIR/CATV is correctly selected on screen display menu. (NTSC Model) Channel Memory, page 21, 22. Selecting Broadcast Source, page 26. 32 neovalley-common 12/6/00 12:09 PM Page 36 APPENDIX C : Specification FUNCTION LCD Panel Input / Output MONITOR TV(NTSC model) 15.1 '' TFT AM LCD 307.2mm x 230.4mm 262,144 0.3mm x 0.3mm XGA 1024 x768 (@85Hz) TTL / TMDS 120 degrees horizontal / 90 degrees vertical 200 : 1(typical) / 250 : 1(typical) / 500 : 1(typical) 200cd/m2 / 250cd/m2 / 500cd/m2 +30 degree Up, -5 degree Down 31 ~ 69KHz Vertical Frequency Dimension 56 ~ 85Hz 380(W)mm x 297(H)mm x 168(D)mm Video Input PC Analog RGB A/V, S-Video, SCART A/V, S-Video Audio Input PC Audio (Option) PC Audio, A/V, S-Video, SCART None Antenna Input Tuning System Color System Sound System None None None None Tuning Range If the signal from the system equals to the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal to the standard signal mode, adjust the mode with referring to the Videocard user guide because the screen might not diplay or only the power LED might be on. For the display modes listed below, the screen image has been optimized during manufacture. Mode VGA SVGA XGA Resolution 720 * 400 640 * 480 640 * 480 640 * 480 800 * 600 800 * 600 1024 * 768 1024 * 768 1024 * 768 Horizontal Frequency (KHz) 31,469 31,469 37,500 43,269 46,875 53,674 48,363 60,023 68,677 Vertical Frequency (Hz) 70,087 59,940 75,000 85,008 75,000 85,061 60,004 75,029 84,997 Pixel Clock Frequency (MHz) 28,322 25,175 31,500 36,000 49,500 56,250 65,000 78,750 94,500 Sync Polarity (H/V) -/+ -/-/-/+/+ +/+ -/+/+ +/+ PC Audio, A/V, S-Video Monitor Out (Option) Area TV Signal Others TV(PAL model) Type Display Area Display Color Pixel Pitch Max. Resolution Interface Viewing Angle contrast Ratio Brightness Physical Rotation Horizontal Frequency Audio Output Regulation APPENDIX D : Display Modes VHF Low None VHF High None UHF None EU(Except France), USA Australia 75Ω Coaxial Cable Programmable Frequency Synthersizer PAL/SECAM, NTSC NTSC B/G, D/K, I E2Ch(48.25MHz)~ 1Ch(91.25MHz)~ S10Ch(168.25MHz C22Ch(165.25MHz) E5Ch(175.25MHz)~ 4Ch(171.25MHz)~ S41Ch(463.25MHz) C38Ch(313.25MHz) E21Ch(471.25MHz)~ 13Ch(471.25MHz)~ E69Ch(885.25MHz) 62Ch(765.25MHz) Option None Teletext None Safety EMI Power Speaker Output Plug & Play level Weight PowerSupply UL, CSA, FCC, CE, CCIB, EIAJ CE, C-Tick Stand - by : 3Watt / Operation : 30Watt 3W(MPO) x 2EA (Option) DDC 1/2B NET 4.6Kg / Gross 5.5Kg DC 12V, 3.5A, 50/60Hz Specification can be changed without prior notice. 33 34 neovalley-common 12/6/00 Memo 12:09 PM Page 38 Memo neovalley-common 12/6/00 12:09 PM Page 40
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2000:12:06 12:17:12 Producer : Acrobat Distiller 4.0 for Macintosh Modify Date : 2000:12:18 11:16:11+09:00 Page Count : 21EXIF Metadata provided by EXIF.tools