FLEXTRONICS R and D I1035 DIGITAL CAMERA User Manual USERS MANUAL 2

FLEXTRONICS R&D; (SHENZHEN) LTD. DIGITAL CAMERA USERS MANUAL 2

Contents

USERS MANUAL 2

40 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the SharpnessUse the sharpness setting to highlight or blend the edges of subjects in pictures.1. Press the button to set the camera to Still Image mode.2. Press the button and press the button to enter menu bar.3. Press the or to select (Sharpness).4. Press the button to enter.5. Press the or button to select the desired setting. 6. Press the button to confirm your choice.1/3STILLResolution 3648x2736Compression Super Fine Sharpness NormalDigital Zoom OffAF- assist Beam OffSharpnessStrongNormalSoftSTRONG Increases contrast on the edge of the picture. Image color noise (grain) may occur in the recording image.NORMAL The edges of the image are sharp, this is suitable for printing.SOFT Softens the edge of the picture, creating a “soft focus” effect.
41Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Zoom FeatureThere are two types of zoom in this camera: optical zoom and digital zoom. Optical zoom alters the focal distance , and its factor range is 1X to 3X. Digital zoom is activated after you reach the maximum optical zoom (3X). It enlarges the part of the image at the center of the image screen. Digital zoom factor range is 1X to 4X. These zoom features let you zoom in the central area of an image and photograph only the enlarged portion of the picture. NOTE: • Using the digital zoom may cause a slight decrease in image quality.Zooming In and Out of the Image1. Press the button to set the camera to Still Image mode.2. Press the to zoom into the subject, or press the button to return to original zoom status. While you press the or button, a yellow square will appear on the zoom status bar as illustrated. The yellow square in the bar indicates the zoom status. “T” stands for “Tele” and “W” stands for “Wide”. Keep the button pressed, and the camera will switch from optical zoom to digital zoom when it reaches the maximum optical zoom.Zoom Status Bar
42 Polaroid i1035 Digital Camera User Guidewww.polaroid.com3. Now you can take pictures and review them with the zoom setting you set. The zoom setting will remain after pictures are taken. If you want to take a normal size picture, please use the button.Digital zoom status NOTE:• You may notice a decrease in image quality when using the digital zoom.• Digital zoom feature is also available in Video and Playback modes.
43Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Turning Digital Zoom On and Off1. Press the button to set the camera to Still Image mode.2. Press the button and press the button to enter menu bar.3. Press the or to select (Digital Zoom).4. Press the button to enter.5. Press the or button to select the desired setting.6. Press the button to confirm your choice.STILLResolution 3648x2736Compression Super Fine Sharpness NormalDigital Zoom OffAF- assist Beam Off1/3Digital ZoomOffOn
44 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Turning the Auto-focus Assist Beam On and OffIn this setting, you can turn the Auto-Focus assist beam on or off. When it is turned on, the focus assistant lamp gives out a strong beam of light and helps the camera easily focus on the subject.1. Press the button to set the camera to Still Image mode.2. Press the button and press the button to enter menu bar.3. Press the or to select (AF-assist Beam).4. Press the button to enter.5. Press the or button to select the desired setting.6. Press the button to confirm your choice.AF-assist BeamOffOnSTILLResolution 3648x2736Compression Super Fine Sharpness NormalDigital Zoom OffAF- assist Beam Off1/3
45Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Specifying the Quick Review PeriodA quick review of pictures (after pictures have been taken) is available with options of 2 or 5 seconds.Follow the instructions below to set the quick review period:1. Press the button to set the camera to Still Image mode.2. Press the button and press the button to enter menu bar.3. Press the or to select (Quick Review).4. Press the button to enter.5. Press the or button to select the desired setting. 6. Press the button to confirm your choice.STILLQuick Review 2 SecondsFocus Area Single AFSmile Detection OnBlink OnFace Tracking On2/3Quick ReviewOff2 Seconds5 SecondsNeed help with your digital camera?Call our toll-free customer service number. Look for the insert with this icon:Or visit www.polaroid.com.
46 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Selecting the Focus Area1. Press the button to set the camera to Still Image mode.2. Press the button and press the button to enter menu bar.3. Press the or to select (Focus Area).4. Press the button to enter.5. Press the or button to select the desired setting. 6. Press the button to confirm your choice.STILLQuick Review 2 SecondsFocus Area Single AFSmile Detection OnBlink OnFace Tracking On2/3Focus AreaSingle AF3-Point AFSingle AF The camera uses the single AF window to automatically set the focus. When the shutter button is pressed halfway, the camera starts focusing until it “locks” onto your subject. When in focus, the focus frame will turn green. If your subject is not in focus, the focus frame will turn red. Release the shutter button and press the shutter button halfway down again. Keep your subject centered on the LCD display. When the best focus position has been selected, the green focus frame will be displayed on the LCD screen.3-Point AF The camera uses three AF windows (left, center and right) to automatically set the focus. When the shutter button is pressed halfway, the camera starts focusing until it “ locks” onto your subject. When the best focus position has been selected, the green focus frame will be displayed on the LCD screen.
47Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the Smile Detection FeatureThis feature is based on “Face Tracking”. When you use smile capture, you need to set the face tracking feature on rst.1. Press the button to set the camera to Still Image mode.2. Press the button and press the button to enter menu bar.3. Press the or to select Smile Detection.STILLQuick Review 2 SecondsFocus Area Single AFSmile Detection OnBlink OnFace Tracking On2/3Smile DetectionOffOn4. Press the button to enter.5. Press the or button to select the desired setting. 6. Press the button to confirm your choice. NOTE:• There is a 2-second time-out to detect the smiles. If no smile is detected after 2 seconds, the camera will not take photos. Should this happen, you must press the shutter button and press it again to capture smiles in your image.• After you setted this feature, press the shutter button halfway down to start the smile detection feature.The camera auto detects faces that are close to the center of the screen and displays the AF frames (up to 5 frames).The camera searches for smiles on your subjects’ faces.When all detected faces smile, the camera will take the pictures without you having to fully press the shutter button.
48 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the Blink Detection FeatureNO MORE CLOSED EYES IN YOUR PICTURES.This feature allows the camera to detect when your subjects’ eyes are open. The camera will take the pictures when the subjects’ eyes are not open. If you have taken blinked pictures, there will be a red frame on the subjects’ faces. When you playback the pictures, there will exist an exclamation mark and a triangle to indicate you have the blinked pictures.1. Press the button to set the camera to Still Image mode.2. Press the button and press the button to enter menu bar.3. Press the or to select (Blink).4. Press the button to enter.5. Press the or button to select the desired setting.6. Press the button to confirm your choice.STILLQuick Review 2 SecondsFocus Area Single AFSmile Detection OnBlink OnFace Tracking On2/3BlinkOffOn NOTE:Blink detection is active only for Auto, Manual, Portrait, Sport, Night Portrait, Children, Party Mode.
49Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the Face Tracking Feature1. Press the button to set the camera to Still Image mode.2. Press the button and press the button to enter menu bar.3. Press the or to select (Face Tracking).4. Press the button to enter.5. Press the or button to select the desired setting.6. Press the button to confirm your choice.STILLQuick Review 2 SecondsFocus Area Single AFSmile Detection OnBlink OnFace Tracking On2/3Face TrackingOffOn NOTE: • The camera uses the single AF window to automatically set the focus. When the shutter button is pressed halfway, the camera starts focusing until it “locks” onto your subject. When in focus, the focus frame will turn green. If your sub-ject is not in focus, the focus frame will turn red. Release the shutter button and press the shutter button halfway down again until it turns green. Press the shutter button all the way down to take you picture. • Face tracking is powered by Arcsoft. • In some photographic scenes, the face tracking function may not be available.
50 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the Red Eye Correction FeatureIn this setting, red-eye in your subject’s eyes may be removed from the image.1. Press the button to set the camera to Still Image mode.2. Press the button and press the button to enter menu bar.3. Press the or to select (Red Eye Correction).4. Press the button to enter.5. Press the or button to select the desired setting.6. Press the button to confirm your choice.STILLRed Eye Correction OffDynamic Lighting Off3/3Red Eye CorrectionOffOn
51Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the Dynamic Lighting FeatureThis feature allows you to improve your images by making changes to color enhancement, contrast and /or level.1. Press the button to set the camera to Still Image mode.2. Press the button and press the button to enter menu bar.3. Press the or to select (Dynamic Lighting).4. Press the button to enter.5. Press the or button to select the desired setting.6. Press the button to confirm your choice.3/3Dynamic LightingOffOnSTILLRed Eye Correction OffDynamic Lighting Off
52 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the Exposure CompensationYou can adjust the exposure compensation value (EV) within the range of -2EV to +2EV in order to compensate for current lighting conditions. This setting can be used to obtain better results when shooting with backlighting, indirect indoor lighting, a dark background, and so on.1. Press the button to set the camera to Still Image mode.2. Press the button.3. Current option is “Exposure”.Exposure4. Press the or button to select the desired setting.5. Press the button to confirm your choice. NOTE:• A higher EV value is used for light-colored and backlit subjects. A lower EV value is better for dark-colored and shooting outdoors on a clear day.• When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even if performing exposure compensation.Need help with your digital camera?Call our toll-free customer service number. Look for the insert with this icon:Or visit www.polaroid.com.
53Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the ISOThis function enables you to change the camera’s sensitivity to light by selecting the different ISO values. ISO is a measure of how quickly your camera reacts to light. The higher the ISO value, the less light the camera needs to make an exposure, allowing the same exposure to be achieved with higher shutter speeds or smaller apertures. In a digital camera, higher ISO value allows higher shutter speed come at the expense of mottled or grain appearing in the final picture.1. Press the button to set the camera to Still Image mode. (See page 31)2. Press the or button to select “ISO”.3. Press the or button to select the desired setting.4. Press the button to confirm your choice.ISOAuto The camera’s sensitivity is automatically changed by different lighting value or subject brightness.80/100/200/400/800/1600 In the same lighting condition, the higher the ISO value is, the faster the shutter speed will be. NOTE:• Higher ISO speeds increase the image noise. To get better images, use as low as ISO speed as possible.• Only scene shooting is in manual mode, can ISO be operational manually.
54 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the White BalanceSelecting the right type of white balance can help to make the color of a subject appear more natural under the type of lighting that is available.1. Press the button to set the camera to Still Image mode.2. Press the button.3. Press the or button to select “White Balance”.White BalanceAuto4. Press the or button to select the desired setting.5. Press the button to confirm your choice.Option DescriptionAutomatic adjustment. Use this for most picture taking scenes.Outdoor sunny dayCloudyOutdoors, shade of a building or partly cloudy / some sun during the dayIndoors, illuminated by light bulbs with color temperature of 3500K to 3000K.Indoors, illuminated by tungsten lighting with color temperature of 3200K or so.Neutral standard uorescentIndoors, illuminated by cool white uorescent lighting. NOTE:• This setting is also available in (Video) mode. • White balance is measured by color temperature. Color temperature is higher, the photo you take is incline to blue; the color temperature is lower, the photo you take is incline to red.
55Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the Shutter Speed1. Press the button to set the camera to Still Image mode. (See page 31)2. Press the button.3. Press the or button to select ”Shutter Speed”.4. Press the or button to select the desired setting.Shutter Speed5. Press the button to confirm your choice. NOTE:You can only adjust the shutter speed by using the camera in the Manual mode.
56 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting the Light Metering Use the light metering setting to ensure that the proper amount of light enters into the camera lens.1. Press the button to set the camera to Still Image mode.2. Press the button.3. Press the or button to select ”Light Metering”.4. Press the or button to select the desired setting.5. Press the button to confirm your choice.Light MeteringOption DescriptionEvaluates the lighting conditions throughout the picture to give an optimum picture exposure. Ideal for general picture taking.Evaluates the lighting conditions of the subject centered on the LCD screen. Ideal for backlit subjects. Similar to Centre, except the metering is concentrated on a smaller area of the subject centered on the LCD. Ideal when an exact exposure of a specic area in the picture is needed.
57Polaroid i1035 Digital Camera User Guidewww.polaroid.com4 Recording Video Clips• Recording Video Clips Use the Video mode to record video clips together with audio. 1. Press the button to set the camera to (Video mode). NOTE:The icon will appear on the LCD screen, indicating the Video mode is activated.2. Frame your subject using the LCD screen.3. Press the Shutter button to start recording. 4. Press the Shutter button again to stop recording, or recording stops when the current memory is full.5. Press the or button to zoom in or out the subject. NOTE:• Digital zoom feature is not available when recording video.
58 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting Video ResolutionVideo resolution refers to the number of pixels in a digital video clip. Video clip quality depends on the file resolution that the camera applies when the video clip is recorded. Higher resolution makes better quality while occupying more memory space.1. Press the button to set the camera to (Video mode).2. Press the button.3. Press the button to select (Resolution).4. Press the button to enter.5. Press the and button to select the desired setting.6. Press the button.VideoResolution 640x480Resolution640X480640X424640X360320X240Here are the approximate length of video clips you can expect the camera to hold at each setting based on the 32MB memory card. You can expand the memory with a Polaroid SD memory card. Please refer to “Capacity of SD Card” on page 110 for further details.Resolution: 640 X 480 Approx. 10 seconds (30 fps) 640 X 424 Approx. 11 seconds (30 fps) 640 X 360 Approx. 12 seconds (30 fps) 320 X 240 Approx. 29 seconds (30 fps)
59Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting Exposure Compensation for Video ClipsYou can adjust the exposure compensation value (EV) within the range of –2EV to +2EV in order to compensate for current lighting conditions. This setting can be used to obtain better result when shooting with backlighting, indirect indoor lighting, a dark background, and so on.1. Press the button to set the camera to (Video mode).2. Press the button.3. Current option is (Exposure).4. Press the or button to select the desired setting.5. Press the button.Exposure NOTE: • A higher EV is best used for light-colored subjects and backlit subjects. A lower EV is best for dark-colored subjects and for shooting outdoors on a clear day. • When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even if performing exposure compensation.Need help with your digital camera?Call our toll-free customer service number. Look for the insert with this icon:Or visit www.polaroid.com.
60 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Setting White Balance for Video ClipsSelecting the right type of white balance can help to make the color of a subject in the video clip appear more natural under the type of lighting that is available. 1. Press the button to set the camera to (Video mode).2. Press the button.3. Press the and button to select (White Balance).4. Press the or button to select the desired setting.ExposureWhite BalanceAuto5. Press the button.Option DescriptionAutomatic adjustment. Use this for most picture taking scenes.Outdoor sunny dayCloudyOutdoors, shade of a building or partly cloudy / some sun during the dayIndoors, illuminated by light bulbs with color temperature of 3500K to 3000K.Indoors, illuminated by tungsten lighting with color temperature of 3200K or so.Neutral standard uorescentIndoors, illuminated by cool white uorescent lighting.
61Polaroid i1035 Digital Camera User Guidewww.polaroid.com5 Managing Your Pictures and Video Clips• Reviewing Pictures 1. Press the button to set the camera to Playback mode.2. Use the and buttons to view the pictures taken. • Reviewing Pictures and Video Clip Files in ThumbnailYou can view up to 9 picture and video clip files at a time on the LCD screen by using the thumbnail function. 4/121. Press the button to set the camera to Playback mode.2. Press the button and up to 9 thumbnail files appear on the LCD screen.3. Press the , , or button to select a thumbnail file.4. Press the or button to view the file in full screen.
62 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Magnifying & Trimming the Displayed PictureX4.01. Press the button to set the camera to Playback mode.2. Use the or button to select a picture.3. Press to magnify the select picture.4. Press the , , or button to move around the magnified picture.5. Press the button to view the picture in the original size.• Playing a Video Clip on LCD Screen1. Press the button to set the camera to Playback mode.2. Press the and buttons to select the desired video clip.3. Press the button to start playing the video clip.4. Press the button again to pause.5. Press the button to stop the video clip.
63Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Protecting/Unprotecting Pictures and Video Clips1. Press the button to set the camera to Playback mode.2. Press button.3. Press the button.4. Press the or button to select “Protect”.5. Press the button to enter.6. Press the or button to select the desired setting.7. Press the button.PlaybackProtect OffSlide Show 2 SecondsCopy To CardCopy From CardProtectOffOnOFF To remove protection from the selected protected file. The icon will disappear from the LCD screen.ON To protect the selected file. The icon will appear on the LCD screen. Need help with your digital camera?Call our toll-free customer service number. Look for the insert with this icon:Or visit www.polaroid.com.
64 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Running a Slide ShowThe slide show function enables you to view all picture and video clip files stored in the current memory repeatedly one by one on the LCD screen.1. Press the button to set the camera to Playback mode.2. Press button.3. Press the button.4. Press the or button to select “Slide Show”.5. Press the button to enter.6. Press the or button to select the desired setting.7. Press the button.PlaybackProtect OffSlide ShowCopy To CardCopy From CardSlide Show2 Seconds5 Seconds8 SecondsThe slide show will automatically run from the currently displayed picture after you press the button. Press the button to stop the slide show.2 ,5 ,8 SECONDS Every picture will be seen on the LCD at an interval of 2,5,8 seconds continuously. NOTE: The slide show will keep running as long as there is power.
65Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Copy to a Memory CardThis setting allows you to copy pictures and video clips stored in the internal memory to a memory card. 1. Insert an SD card into the camera.2. Turn on the camera. Set the camera’s storage media to internal memory.3. Press the button to set the camera to Playback mode.4. Press button.5. Press the button.6. Press the or button to select “Copy To Card”.7. Press the button to enter.8. Press the or button to select the desired setting.9. Press the button.PlaybackProtect OffSlide ShowCopy To CardCopy From CardCopy To CardThis ImageAll ImagesTHIS IMAGE Copy the selected picture or video clip. Please select the picture or video you want to copy before pressing the button.ALL IMAGES Copy all pictures and video clips stored in the current memory.
66 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Copy From a Memory CardThis setting allows you to copy pictures and video clips stored in the memory card to internal memory. 1. Insert an SD card into the camera.2. Turn on the camera. 3. Press the button to set the camera to Playback mode.4. Press button.5. Press the button.6. Press the or button to select “Copy From Card”.PLAYBACKProtect OffSlide ShowCopy To CardCopy From CardCopy From CardThis ImageAll Images7. Press the button to enter.8. Press the or button to select the desired setting.9. Press the button.THIS IMAGE Copy the selected picture or video clip. Please select the picture or video you want to copy before pressing the button.ALL IMAGES Copy all pictures and video clips stored in the current memory.
67Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Deleting Pictures or Video Clip1. Press the button to set the camera to Playback mode.Deleting a Single Picture or Video Clip2. Press the or button to select the picture or video clip you want to delete.3. Press the button.4. Press the or button to select the desired setting.5. Press the button.6. Press the or button to select the desired setting.7. Press the button to confirm your choice.Delete ButtonThis ImageAllErase This ?CancelOK
68 Polaroid i1035 Digital Camera User Guidewww.polaroid.comDeleting All Pictures and Video Clips2. Press the button.3. Press the or button to select “All”.4. Press the button.5. Press the or button to select the desired setting.6. Press the button to confirm your choice.This ImageAllErase all images & videos ?CancelOKThis Image Delete a selected unprotected option.All Delete all the unprotected files in the current memory. NOTE:• Protected les cannot be deleted. Remove protection before deleting.• All deleted pictures and video clips cannot be recovered.Need help with your digital camera?Call our toll-free customer service number. Look for the insert with this icon:Or visit www.polaroid.com.
69Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Image CroppingIn this setting, the currently displayed JPEG picture can be cropped to the size or a location on the image.1. Press the button to set the camera to Playback mode.2. Select an image you want to crop.3. Press the button.4. Press the or button to select “Crop”.5. Press the button to enter.6. Press and buttons to control the size of the crop mark. Press the , , , buttons to move the crop mark.7. Press the button.8. Press the or button to confirm your choice.9. Press the button to return back to the main menu.CropCrop this image to...?CancelOK10. Press the or button to select “Save” to save your image.Cancel It returns to the main menu without cropping.OK Image crops and returns back to the main menu.
70 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Saving Your Pictures Using “SAVE”1. Press the button to set the camera to Playback mode.2. Select an image you want to edit.3. Press the button.4. Press the or button to select “Save”.5. Press the button to enter.6. Press the or button to select the desired setting.SaveSaveSave the image ?CancelOK7. Press the button to confirm your choice.
71Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Saving Your Pictures Using “SAVE AS”1. Press the button to set the camera to Playback mode.2. Select an image you want to edit. 3. Press the button.4. Press the or button to select “Save As”.5. Press the button to enter.6. Press the or button to select the desired setting.7. Press the button to confirm your choice.Save AsSave AsSave the image to ...CancelOK NOTE:A new picture will be created and saved onto the internal memory or SD Card.
72 Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Exiting the Editing MenuAfter you have finished editing your image, follow these steps to exit the Editing Menu:1. Press the or button to select “Exit”.2. Press the button to enter.3. Press the or button to select the desired setting.ExitExitSaveSave AsExitCancel
73Polaroid i1035 Digital Camera User Guidewww.polaroid.com• Viewing Pictures and Video Clips on a TV To set the video output system:The video output signal (NTSC or PAL) can be switched to accommodate different signal systems. For example, NTSC for U.S.A., Canada, Taiwan, Japan, etc. and PAL for Europe, Asia (excluding Taiwan), etc.You can change the video output system according to the following steps:1. Access the setup menu.2. Press the button.3. Press the or button to select (Video System).4. Press the button to enter.5. Press the or button to select the desired setting.6. Press the button to confirm your choice.SETUPDate /TimeAuto Power Off 1 MinuteBeep Sound OnVolumeVideo System LCD1/3.Video SystemLCDNTSCPAL NOTE:Please connect to TV before choosing NTSC and PAL for video output system.
74 Polaroid i1035 Digital Camera User Guidewww.polaroid.com6 Print Settings• Printing Procedures1. Preparing the camera and the printer.Camera Be sure battery level is full before printing.Printer Refer to the user guide that comes with your printer and make preparations (paper, ink cassette, cartridge, etc.) as required. Turn on the camera and the printer.2. Connecting the camera to the printerRefer to "Camera / Printer Connection" on page 77 for details.3. Select print settings. Use the camera's function and navigation buttons to select the print settings.4. PrintingPress the button to start printing.
75Polaroid i1035 Digital Camera User Guidewww.polaroid.comPrinting ErrorsPrinting operation may still fail with some errors even if you press the button after selecting “CONTINUE”. In that case, select “CANCEL” and press the button. NOTE: Please refer to the printer’s user guide for the solutions. Printing may resume once the problem is solved.Need help with your digital camera?Call our toll-free customer service number. Look for the insert with this icon:Or visit www.polaroid.com.
76 Polaroid i1035 Digital Camera User Guidewww.polaroid.comList of Error MessagesPAPER IS EMPTY Paper cassette runs out of paper. PAPER IS NOT LOADED Paper is not loaded or incorrectly loaded. PAPER IS NOT EJECTED Paper is not ejected correctly. MEDIA ERROR Paper is not detected, paper is skewed, or roll paper cannot be cut or torn offPAPER IS JAMMED The paper is jammed during printing. PAPER IS NEARLY EMPTY Paper cassette almost out of paper. PAPER TYPE IS NOT SUPPORTEDPaper type or size is not supported by the printer or paper found in the printer does not match request. INK EMPTY Ink cassette is out of ink. INK LOW Ink cassette is almost empty.WASTE INK RESERVOIR FULL Waste ink reservoir is full. HARDWARE FATAL ERROR A serious error occurs with the printer’s hardware. PRINTER IS BUSY The printer is busy with other print jobs from another source. PRINTER IS OCCUPIED The printer is performing maintenance or occupied by other external device.COVER IS OPENED The printer’s cover is open or not securely closed.NO MARKING AGENT Some print information is missing during printing, e.g. missing print head. INK COVER IS OPENED The printer’s ink cover is open or not securely closed. NO INK CARTRIDGE No ink cartridge is loaded. SPECIFIED INFO IS TOO LARGE Image information is too large to process. FILE DECODE ERROR Picture format of specied image cannot be decoded.
77Polaroid i1035 Digital Camera User Guidewww.polaroid.comCamera / Printer Connection1. Power on the camera.2. Plug Series A of the USB cable into the marked socket on your printer. Plug USB of the USB cable into the port on your camera. Location of USB socket will vary from printer to printer.To Printer3. System will enter Print/PC Select menu automatically.4. Press or button to select the Printer, and press the button to enter Print mode.Computer/Mass StoragePrinter 1DefaultDefaultDefaultDefaultCropSelect PrintPrintPrintComputer/Mass StoragePrinter. NOTE:• Once the user connects the USB from the camera to either the printer or the PC in any mode, a screen pops up giving the option to pick either the PC or the Printer.• As a instead, you can also connect the Polaroid POGO Instant Digital Mobile Printer to this camera via USB cable to print your pictures.
78 Polaroid i1035 Digital Camera User Guidewww.polaroid.comSelecting Print Settings1. Press or button to select a setting item. 1DefaultDefaultDefaultDefaultCropSelect PrintPrintPrint2. Press or button to adjust parameter or press the button to enter submenu. No. of CopyDefaultDefaultCropSelect PrintPrint1DefaultDefaultDate Stamp On/OffPaper SizeImage croppingSelect print modePrintingNumber of CopiesPrint LayoutFile Name On/Off NOTE:• Print settings are congured for images only. Make sure there are no video clips or other le besides images in the memory before printing.• Not all printers will support all these print options. Please refer to the printer user guide for options available• The camera’s print settings are not supported by some printers. The LCD screen shows those settings that are available for the currently connected printer.
79Polaroid i1035 Digital Camera User Guidewww.polaroid.comSpecifying the Number of Copies1. Press the or button to select “No. of Copy”.2. Press the or button to specify the number of copies (from 1 to 99) you want to print for the selected image or all images.No. of CopyDefaultDefaultCropSelect PrintPrint1DefaultDefault NOTE: “01” is the default setting.Selecting Print Layout1. Press the or button to select “N-UP LAYOUT”.2. Press the or button to specify the number of printed images on a page. N-up LayoutDefaultDefaultCropSelect PrintPrint1DefaultDefaultDEFAULT Print settings differ according to the printer model. 1/2/4/6/8 Specify the number of printed images on a page. BORDERLESS Print right to the edge of the page. Setting the File Name On/Off1. Press the or button to select “FILE NAME”.2. Press the or button to select “DEFAULT”, “ON” or “OFF”.File NameDefaultDefaultCropSelect PrintPrint1DefaultDefaultDEFAULT Print settings differ according to the printer model.ON Add the file name to the printed image.OFF Print without the file name.

Navigation menu