FLEXTRONICS R and D I1035 DIGITAL CAMERA User Manual USERS MANUAL 2

FLEXTRONICS R&D; (SHENZHEN) LTD. DIGITAL CAMERA USERS MANUAL 2

Contents

USERS MANUAL 2

40 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the Sharpness
Use the sharpness setting to highlight or blend the edges of subjects in
pictures.
1. Press the button to set the camera to
Still Image mode.
2. Press the button and press the
button to enter menu bar.
3. Press the or to select
(Sharpness).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
1/3
STILL
Resolution 3648x2736
Compression Super Fine
Sharpness Normal
Digital Zoom Off
AF- assist Beam Off
Sharpness
Strong
Normal
Soft
STRONG Increases contrast on the edge of the picture. Image color noise
(grain) may occur in the recording image.
NORMAL The edges of the image are sharp, this is suitable for printing.
SOFT Softens the edge of the picture, creating a “soft focus” effect.
41
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Zoom Feature
There are two types of zoom in this camera: optical zoom and digital
zoom. Optical zoom alters the focal distance , and its factor range is 1X to
3X. Digital zoom is activated after you reach the maximum optical zoom
(3X). It enlarges the part of the image at the center of the image screen.
Digital zoom factor range is 1X to 4X. These zoom features let you zoom
in the central area of an image and photograph only the enlarged portion
of the picture.
NOTE:
• Using the digital zoom may cause a slight decrease in image quality.
Zooming In and Out of the Image
1. Press the button to set the camera to Still Image mode.
2. Press the to zoom into the subject, or press the button to
return to original zoom status. While you press the or button,
a yellow square will appear on the zoom status bar as illustrated. The
yellow square in the bar indicates the zoom status. “T” stands for
“Tele” and “W” stands for “Wide”. Keep the button pressed,
and the camera will switch from optical zoom to digital zoom when it
reaches the maximum optical zoom.
Zoom Status Bar
42 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
3. Now you can take pictures and review them with the zoom setting you
set. The zoom setting will remain after pictures are taken. If you want
to take a normal size picture, please use the button.
Digital zoom
status
NOTE:
• You may notice a decrease in image quality when using the digital
zoom.
• Digital zoom feature is also available in Video and Playback
modes.
43
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Turning Digital Zoom On and Off
1. Press the button to set the camera to
Still Image mode.
2. Press the button and press the
button to enter menu bar.
3. Press the or to select (Digital
Zoom).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
STILL
Resolution 3648x2736
Compression Super Fine
Sharpness Normal
Digital Zoom Off
AF- assist Beam Off
1/3
Digital Zoom
Off
On
44 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Turning the Auto-focus Assist Beam On and Off
In this setting, you can turn the Auto-Focus assist beam on or off. When
it is turned on, the focus assistant lamp gives out a strong beam of light
and helps the camera easily focus on the subject.
1. Press the button to set the camera to
Still Image mode.
2. Press the button and press the
button to enter menu bar.
3. Press the or to select (AF-
assist Beam).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
AF-assist Beam
Off
On
STILL
Resolution 3648x2736
Compression Super Fine
Sharpness Normal
Digital Zoom Off
AF- assist Beam Off
1/3
45
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Specifying the Quick Review Period
A quick review of pictures (after pictures have been taken) is available
with options of 2 or 5 seconds.
Follow the instructions below to set the quick review period:
1. Press the button to set the camera
to Still Image mode.
2. Press the button and press the
button to enter menu bar.
3. Press the or to select (Quick
Review).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
STILL
Quick Review 2 Seconds
Focus Area Single AF
Smile Detection On
Blink On
Face Tracking On
2/3
Quick Review
Off
2 Seconds
5 Seconds
Need help with your digital camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.
46 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Selecting the Focus Area
1. Press the button to set the camera
to Still Image mode.
2. Press the button and press the
button to enter menu bar.
3. Press the or to select (Focus
Area).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
STILL
Quick Review 2 Seconds
Focus Area Single AF
Smile Detection On
Blink On
Face Tracking On
2/3
Focus Area
Single AF
3-Point AF
Single AF The camera uses the single AF window to automatically
set the focus. When the shutter button is pressed halfway,
the camera starts focusing until it “locks” onto your
subject. When in focus, the focus frame will turn green.
If your subject is not in focus, the focus frame will turn
red. Release the shutter button and press the shutter
button halfway down again. Keep your subject centered
on the LCD display. When the best focus position has been
selected, the green focus frame will be displayed on the
LCD screen.
3-Point AF The camera uses three AF windows (left, center and right)
to automatically set the focus. When the shutter button
is pressed halfway, the camera starts focusing until it “
locks” onto your subject. When the best focus position
has been selected, the green focus frame will be displayed
on the LCD screen.
47
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the Smile Detection Feature
This feature is based on “Face Tracking”. When you use smile capture,
you need to set the face tracking feature on rst.
1. Press the button to set the camera
to Still Image mode.
2. Press the button and press the
button to enter menu bar.
3. Press the or to select Smile
Detection.
STILL
Quick Review 2 Seconds
Focus Area Single AF
Smile Detection On
Blink On
Face Tracking On
2/3
Smile Detection
Off
On
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
NOTE:
• There is a 2-second time-out to detect the smiles. If no smile is detected
after 2 seconds, the camera will not take photos. Should this happen, you
must press the shutter button and press it again to capture smiles in your
image.
• After you setted this feature, press the shutter button halfway down to start
the smile detection feature.The camera auto detects faces that are close to
the center of the screen and displays the AF frames (up to 5 frames).The
camera searches for smiles on your subjects’ faces.When all detected faces
smile, the camera will take the pictures without you having to fully press the
shutter button.
48 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the Blink Detection Feature
NO MORE CLOSED EYES IN YOUR PICTURES.
This feature allows the camera to detect when your subjects’ eyes are
open. The camera will take the pictures when the subjects’ eyes are
not open. If you have taken blinked pictures, there will be a red frame
on the subjects’ faces. When you playback the pictures, there will exist
an exclamation mark and a triangle to indicate you have the blinked
pictures.
1. Press the button to set the camera
to Still Image mode.
2. Press the button and press the
button to enter menu bar.
3. Press the or to select
(Blink).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
STILL
Quick Review 2 Seconds
Focus Area Single AF
Smile Detection On
Blink On
Face Tracking On
2/3
Blink
Off
On
NOTE:
Blink detection is active only for Auto, Manual, Portrait, Sport, Night
Portrait, Children, Party Mode.
49
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the Face Tracking Feature
1. Press the button to set the camera
to Still Image mode.
2. Press the button and press the
button to enter menu bar.
3. Press the or to select (Face
Tracking).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
STILL
Quick Review 2 Seconds
Focus Area Single AF
Smile Detection On
Blink On
Face Tracking On
2/3
Face Tracking
Off
On
NOTE:
• The camera uses the single AF window to automatically set the focus. When
the shutter button is pressed halfway, the camera starts focusing until it “locks”
onto your subject. When in focus, the focus frame will turn green. If your sub-
ject is not in focus, the focus frame will turn red. Release the shutter button
and press the shutter button halfway down again until it turns green. Press the
shutter button all the way down to take you picture.
• Face tracking is powered by Arcsoft.
• In some photographic scenes, the face tracking function may not be available.
50 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the Red Eye Correction Feature
In this setting, red-eye in your subject’s eyes may be removed from the
image.
1. Press the button to set the camera
to Still Image mode.
2. Press the button and press the
button to enter menu bar.
3. Press the or to select (Red
Eye Correction).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
STILL
Red Eye Correction Off
Dynamic Lighting Off
3/3
Red Eye Correction
Off
On
51
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the Dynamic Lighting Feature
This feature allows you to improve your images by making changes to
color enhancement, contrast and /or level.
1. Press the button to set the camera
to Still Image mode.
2. Press the button and press the
button to enter menu bar.
3. Press the or to select
(Dynamic Lighting).
4. Press the button to enter.
5. Press the or button to select the
desired setting.
6. Press the button to confirm your
choice.
3/3
Dynamic Lighting
Off
On
STILL
Red Eye Correction Off
Dynamic Lighting Off
52 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the Exposure Compensation
You can adjust the exposure compensation value (EV) within the range
of -2EV to +2EV in order to compensate for current lighting conditions.
This setting can be used to obtain better results when shooting with
backlighting, indirect indoor lighting, a dark background, and so on.
1. Press the button to set the camera to
Still Image mode.
2. Press the button.
3. Current option is “Exposure”.
Exposure
4. Press the or button to select the
desired setting.
5. Press the button to confirm your
choice.
NOTE:
• A higher EV value is used for light-colored and backlit subjects. A lower EV
value is better for dark-colored and shooting outdoors on a clear day.
• When shooting under very dark or very bright conditions, you may not be able
to obtain satisfactory results even if performing exposure compensation.
Need help with your digital camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.
53
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the ISO
This function enables you to change the camera’s sensitivity to light by
selecting the different ISO values. ISO is a measure of how quickly your
camera reacts to light. The higher the ISO value, the less light the camera
needs to make an exposure, allowing the same exposure to be achieved
with higher shutter speeds or smaller apertures. In a digital camera, higher
ISO value allows higher shutter speed come at the expense of mottled or
grain appearing in the final picture.
1. Press the button to set the camera to
Still Image mode. (See page 31)
2. Press the or button to select
“ISO”.
3. Press the or button to select the
desired setting.
4. Press the button to confirm your
choice.
ISO
Auto The camera’s sensitivity is automatically
changed by different lighting value or subject
brightness.
80/100/200/400/800/1600 In the same lighting condition, the higher the
ISO value is, the faster the shutter speed will
be.
NOTE:
• Higher ISO speeds increase the image noise. To get better images, use as
low as ISO speed as possible.
• Only scene shooting is in manual mode, can ISO be operational manually.
54 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the White Balance
Selecting the right type of white balance can help to make the color of a
subject appear more natural under the type of lighting that is available.
1. Press the button to set the camera to Still Image mode.
2. Press the button.
3. Press the or button to select
“White Balance”.
White Balance
Auto
4. Press the or button to select the
desired setting.
5. Press the button to confirm your choice.
Option Description
Automatic adjustment. Use this for most picture taking scenes.
Outdoor sunny day
Cloudy
Outdoors, shade of a building or partly cloudy / some sun during the day
Indoors, illuminated by light bulbs with color temperature of 3500K to
3000K.
Indoors, illuminated by tungsten lighting with color temperature of 3200K
or so.
Neutral standard uorescent
Indoors, illuminated by cool white uorescent lighting.
NOTE:
• This setting is also available in (Video) mode.
• White balance is measured by color temperature. Color temperature is
higher, the photo you take is incline to blue; the color temperature is lower,
the photo you take is incline to red.
55
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the Shutter Speed
1. Press the button to set the camera to
Still Image mode. (See page 31)
2. Press the button.
3. Press the or button to select
”Shutter Speed”.
4. Press the or button to select the
desired setting.
Shutter Speed
5. Press the button to confirm your
choice.
NOTE:
You can only adjust the shutter speed by using the camera in the Manual
mode.
56 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting the Light Metering
Use the light metering setting to ensure that the proper amount of light
enters into the camera lens.
1. Press the button to set the camera to
Still Image mode.
2. Press the button.
3. Press the or button to select
”Light Metering”.
4. Press the or button to select the
desired setting.
5. Press the button to confirm your
choice.
Light Metering
Option Description
Evaluates the lighting conditions throughout the picture to give an optimum picture
exposure. Ideal for general picture taking.
Evaluates the lighting conditions of the subject centered on the LCD screen. Ideal
for backlit subjects.
Similar to Centre, except the metering is concentrated on a smaller area of the
subject centered on the LCD. Ideal when an exact exposure of a specic area in
the picture is needed.
57
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
4 Recording Video Clips
• Recording Video Clips
Use the Video mode to record video clips together with audio.
1. Press the button to set the camera to (Video mode).
NOTE:
The icon will appear on the LCD screen,
indicating the Video mode is activated.
2. Frame your subject using the LCD
screen.
3. Press the Shutter button to start
recording.
4. Press the Shutter button again to stop
recording, or recording stops when the
current memory is full.
5. Press the or button to zoom in
or out the subject.
NOTE:
• Digital zoom feature is not available when recording video.
58 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting Video Resolution
Video resolution refers to the number of pixels in a digital video clip. Video
clip quality depends on the file resolution that the camera applies when
the video clip is recorded. Higher resolution makes better quality while
occupying more memory space.
1. Press the button to set the camera to
(Video mode).
2. Press the button.
3. Press the button to select
(Resolution).
4. Press the button to enter.
5. Press the and button to select
the desired setting.
6. Press the button.
Video
Resolution 640x480
Resolution
640X480
640X424
640X360
320X240
Here are the approximate length of video clips you can expect the camera
to hold at each setting based on the 32MB memory card. You can expand
the memory with a Polaroid SD memory card. Please refer to “Capacity of
SD Card” on page 110 for further details.
Resolution: 640 X 480 Approx. 10 seconds (30 fps)
640 X 424 Approx. 11 seconds (30 fps)
640 X 360 Approx. 12 seconds (30 fps)
320 X 240 Approx. 29 seconds (30 fps)
59
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting Exposure Compensation for Video Clips
You can adjust the exposure compensation value (EV) within the range
of –2EV to +2EV in order to compensate for current lighting conditions.
This setting can be used to obtain better result when shooting with
backlighting, indirect indoor lighting, a dark background, and so on.
1. Press the button to set the camera to (Video mode).
2. Press the button.
3. Current option is (Exposure).
4. Press the or button to select the
desired setting.
5. Press the button.
Exposure
NOTE:
• A higher EV is best used for light-colored subjects and backlit subjects. A
lower EV is best for dark-colored subjects and for shooting outdoors on a
clear day.
• When shooting under very dark or very bright conditions, you may not be able
to obtain satisfactory results even if performing exposure compensation.
Need help with your digital camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.
60 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Setting White Balance for Video Clips
Selecting the right type of white balance can help to make the color of
a subject in the video clip appear more natural under the type of lighting
that is available.
1. Press the button to set the camera to
(Video mode).
2. Press the button.
3. Press the and button to select
(White Balance).
4. Press the or button to select the
desired setting.
Exposure
White Balance
Auto
5. Press the button.
Option Description
Automatic adjustment. Use this for most picture taking scenes.
Outdoor sunny day
Cloudy
Outdoors, shade of a building or partly cloudy / some sun during the day
Indoors, illuminated by light bulbs with color temperature of 3500K to
3000K.
Indoors, illuminated by tungsten lighting with color temperature of 3200K
or so.
Neutral standard uorescent
Indoors, illuminated by cool white uorescent lighting.
61
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
5 Managing Your Pictures and Video Clips
• Reviewing Pictures
1. Press the button to set the camera to
Playback mode.
2. Use the and buttons to view the
pictures taken.
• Reviewing Pictures and Video Clip Files in Thumbnail
You can view up to 9 picture and video clip files at a time on the LCD
screen by using the thumbnail function.
4/12
1. Press the button to set the camera to
Playback mode.
2. Press the button and up to 9
thumbnail files appear on the LCD screen.
3. Press the , , or button to select a thumbnail file.
4. Press the or button to view the file in full screen.
62 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Magnifying & Trimming the Displayed Picture
X4.0
1. Press the button to set the camera to
Playback mode.
2. Use the or button to select a
picture.
3. Press to magnify the select picture.
4. Press the , , or button to move around the magnified
picture.
5. Press the button to view the picture in the original size.
• Playing a Video Clip on LCD Screen
1. Press the button to set the camera to Playback mode.
2. Press the and buttons to select the desired video clip.
3. Press the button to start playing the video clip.
4. Press the button again to pause.
5. Press the button to stop the video clip.
63
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Protecting/Unprotecting Pictures and Video Clips
1. Press the button to set the camera to
Playback mode.
2. Press button.
3. Press the button.
4. Press the or button to select
“Protect”.
5. Press the button to enter.
6. Press the or button to select the
desired setting.
7. Press the button.
Playback
Protect Off
Slide Show 2 Seconds
Copy To Card
Copy From Card
Protect
Off
On
OFF To remove protection from the selected protected file. The
icon will disappear from the LCD screen.
ON To protect the selected file. The icon will appear on the
LCD screen.
Need help with your digital camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.
64 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Running a Slide Show
The slide show function enables you to view all picture and video clip files
stored in the current memory repeatedly one by one on the LCD screen.
1. Press the button to set the camera to
Playback mode.
2. Press button.
3. Press the button.
4. Press the or button to select
“Slide Show”.
5. Press the button to enter.
6. Press the or button to select the
desired setting.
7. Press the button.
Playback
Protect Off
Slide Show
Copy To Card
Copy From Card
Slide Show
2 Seconds
5 Seconds
8 Seconds
The slide show will automatically run from the currently displayed picture
after you press the button. Press the button to stop the slide
show.
2 ,5 ,8 SECONDS Every picture will be seen on the LCD at an interval
of 2,5,8 seconds continuously.
NOTE:
The slide show will keep running as long as there is power.
65
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Copy to a Memory Card
This setting allows you to copy pictures and video clips stored in the
internal memory to a memory card.
1. Insert an SD card into the camera.
2. Turn on the camera. Set the camera’s
storage media to internal memory.
3. Press the button to set the camera to
Playback mode.
4. Press button.
5. Press the button.
6. Press the or button to select
“Copy To Card”.
7. Press the button to enter.
8. Press the or button to select the
desired setting.
9. Press the button.
Playback
Protect Off
Slide Show
Copy To Card
Copy From Card
Copy To Card
This Image
All Images
THIS IMAGE Copy the selected picture or video clip. Please select the
picture or video you want to copy before pressing the
button.
ALL IMAGES Copy all pictures and video clips stored in the current
memory.
66 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Copy From a Memory Card
This setting allows you to copy pictures and video clips stored in the
memory card to internal memory.
1. Insert an SD card into the camera.
2. Turn on the camera.
3. Press the button to set the camera to
Playback mode.
4. Press button.
5. Press the button.
6. Press the or button to select
“Copy From Card”.
PLAYBACK
Protect Off
Slide Show
Copy To Card
Copy From Card
Copy From Card
This Image
All Images
7. Press the button to enter.
8. Press the or button to select the
desired setting.
9. Press the button.
THIS IMAGE Copy the selected picture or video clip. Please select the
picture or video you want to copy before pressing the
button.
ALL IMAGES Copy all pictures and video clips stored in the current
memory.
67
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Deleting Pictures or Video Clip
1. Press the button to set the camera to Playback mode.
Deleting a Single Picture or Video Clip
2. Press the or button to select the
picture or video clip you want to delete.
3. Press the button.
4. Press the or button to select the
desired setting.
5. Press the button.
6. Press the or button to select the
desired setting.
7. Press the button to confirm your
choice.
Delete Button
This Image
All
Erase This ?
Cancel
OK
68 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
Deleting All Pictures and Video Clips
2. Press the button.
3. Press the or button to select
“All”.
4. Press the button.
5. Press the or button to select
the desired setting.
6. Press the button to confirm your
choice.
This Image
All
Erase all images & videos ?
Cancel
OK
This Image Delete a selected unprotected option.
All Delete all the unprotected files in the current memory.
NOTE:
• Protected les cannot be deleted. Remove protection before deleting.
• All deleted pictures and video clips cannot be recovered.
Need help with your digital camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.
69
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Image Cropping
In this setting, the currently displayed JPEG picture can be cropped to the size or a
location on the image.
1. Press the button to set the camera to
Playback mode.
2. Select an image you want to crop.
3. Press the button.
4. Press the or button to select
“Crop”.
5. Press the button to enter.
6. Press and buttons to control
the size of the crop mark. Press the
, , , buttons to move the crop
mark.
7. Press the button.
8. Press the or button to confirm
your choice.
9. Press the button to return back to the
main menu.
Crop
Crop this image to...?
Cancel
OK
10. Press the or button to select “Save” to save your image.
Cancel It returns to the main menu without cropping.
OK Image crops and returns back to the main menu.
70 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Saving Your Pictures Using “SAVE”
1. Press the button to set the camera
to Playback mode.
2. Select an image you want to edit.
3. Press the button.
4. Press the or button to select
“Save”.
5. Press the button to enter.
6. Press the or button to select
the desired setting.
Save
Save
Save the image ?
Cancel
OK
7. Press the button to confirm your
choice.
71
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Saving Your Pictures Using “SAVE AS”
1. Press the button to set the camera to
Playback mode.
2. Select an image you want to edit.
3. Press the button.
4. Press the or button to select
“Save As”.
5. Press the button to enter.
6. Press the or button to select the
desired setting.
7. Press the button to confirm your
choice.
Save As
Save As
Save the image to ...
Cancel
OK
NOTE:
A new picture will be created and saved onto the internal memory or
SD Card.
72 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Exiting the Editing Menu
After you have finished editing your image, follow these steps to exit the
Editing Menu:
1. Press the or button to select
“Exit”.
2. Press the button to enter.
3. Press the or button to select the
desired setting.
Exit
Exit
Save
Save As
Exit
Cancel
73
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
• Viewing Pictures and Video Clips on a TV
To set the video output system:
The video output signal (NTSC or PAL) can be switched to accommodate
different signal systems. For example, NTSC for U.S.A., Canada, Taiwan,
Japan, etc. and PAL for Europe, Asia (excluding Taiwan), etc.
You can change the video output system according to the following
steps:
1. Access the setup menu.
2. Press the button.
3. Press the or button to select
(Video System).
4. Press the button to enter.
5. Press the or button to select
the desired setting.
6. Press the button to confirm your
choice.
SETUP
Date /Time
Auto Power Off 1 Minute
Beep Sound On
Volume
Video System LCD
1/3
.
Video System
LCD
NTSC
PAL
NOTE:
Please connect to TV before choosing NTSC and PAL for video output system.
74 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
6 Print Settings
• Printing Procedures
1. Preparing the camera and the printer.
Camera Be sure battery level is full before printing.
Printer Refer to the user guide that comes with your
printer and make preparations (paper, ink cassette,
cartridge, etc.) as required.
Turn on the camera and the printer.
2. Connecting the camera to the printer
Refer to "Camera / Printer Connection" on page 77 for details.
3. Select print settings.
Use the camera's function and navigation buttons to select the print
settings.
4. Printing
Press the button to start printing.
75
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
Printing Errors
Printing operation may still fail with some errors even if you press the
button after selecting “CONTINUE”. In that case, select “CANCEL” and
press the button.
NOTE:
Please refer to the printer’s user guide for the solutions. Printing may resume
once the problem is solved.
Need help with your digital camera?
Call our toll-free customer service number. Look for the insert with this icon:
Or visit www.polaroid.com.
76 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
List of Error Messages
PAPER IS EMPTY Paper cassette runs out of paper.
PAPER IS NOT LOADED Paper is not loaded or incorrectly loaded.
PAPER IS NOT EJECTED Paper is not ejected correctly.
MEDIA ERROR Paper is not detected, paper is skewed, or roll paper
cannot be cut or torn off
PAPER IS JAMMED The paper is jammed during printing.
PAPER IS NEARLY EMPTY Paper cassette almost out of paper.
PAPER TYPE IS NOT
SUPPORTED
Paper type or size is not supported by the printer or
paper found in the printer does not match request.
INK EMPTY Ink cassette is out of ink.
INK LOW Ink cassette is almost empty.
WASTE INK RESERVOIR FULL Waste ink reservoir is full.
HARDWARE FATAL ERROR A serious error occurs with the printer’s hardware.
PRINTER IS BUSY The printer is busy with other print jobs from another
source.
PRINTER IS OCCUPIED The printer is performing maintenance or occupied by
other external device.
COVER IS OPENED The printer’s cover is open or not securely closed.
NO MARKING AGENT Some print information is missing during printing, e.g.
missing print head.
INK COVER IS OPENED The printer’s ink cover is open or not securely closed.
NO INK CARTRIDGE No ink cartridge is loaded.
SPECIFIED INFO IS TOO LARGE Image information is too large to process.
FILE DECODE ERROR Picture format of specied image cannot be decoded.
77
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
Camera / Printer Connection
1. Power on the camera.
2. Plug Series A of the USB cable into the marked socket on your
printer. Plug USB of the USB cable into the port on your camera.
Location of USB socket will vary from printer to printer.
To Printer
3. System will enter Print/PC Select menu automatically.
4. Press or button to select the Printer, and press the
button to enter Print mode.
Computer/Mass Storage
Printer 1
Default
Default
Default
Default
Crop
Select Print
Print
Print
Computer/Mass Storage
Printer
.
NOTE:
• Once the user connects the USB from the camera to either the printer or the
PC in any mode, a screen pops up giving the option to pick either the PC or
the Printer.
• As a instead, you can also connect the Polaroid POGO Instant Digital Mobile
Printer to this camera via USB cable to print your pictures.
78 Polaroid i1035 Digital Camera User Guide
www.polaroid.com
Selecting Print Settings
1. Press or button to select a
setting item. 1
Default
Default
Default
Default
Crop
Select Print
Print
Print
2. Press or button to adjust parameter or
press the button to enter submenu.
No. of Copy
Default
Default
Crop
Select Print
Print
1
Default
Default
Date Stamp On/Off
Paper Size
Image cropping
Select print mode
Printing
Number of Copies
Print Layout
File Name On/Off
NOTE:
• Print settings are congured for images only. Make sure there are no video
clips or other le besides images in the memory before printing.
• Not all printers will support all these print options. Please refer to the printer
user guide for options available
• The camera’s print settings are not supported by some printers. The LCD
screen shows those settings that are available for the currently connected
printer.
79
Polaroid i1035 Digital Camera User Guide
www.polaroid.com
Specifying the Number of Copies
1. Press the or button to select
“No. of Copy”.
2. Press the or button to specify the
number of copies (from 1 to 99) you
want to print for the selected image or all
images.
No. of Copy
Default
Default
Crop
Select Print
Print
1
Default
Default
NOTE:
“01” is the default setting.
Selecting Print Layout
1. Press the or button to select
“N-UP LAYOUT”.
2. Press the or button to specify the
number of printed images on a page.
N-up Layout
Default
Default
Crop
Select Print
Print
1
Default
Default
DEFAULT Print settings differ according to the printer model.
1/2/4/6/8 Specify the number of printed images on a page.
BORDERLESS Print right to the edge of the page.
Setting the File Name On/Off
1. Press the or button to select
“FILE NAME”.
2. Press the or button to select
“DEFAULT”, “ON” or “OFF”.
File Name
Default
Default
Crop
Select Print
Print
1
Default
Default
DEFAULT Print settings differ according to the printer model.
ON Add the file name to the printed image.
OFF Print without the file name.

Navigation menu