Fimi Srl 802160 DIGITAL TRANSMISSION SYSTEM User Manual

Fimi Srl DIGITAL TRANSMISSION SYSTEM 15 CMPD12CV I UserMan

a href="https://usermanual.wiki/Fimi-Srl" itemprop="url"> Fimi Srl >

UserMan

User Manual Xper module 12 inch Wireless Thin Client               (Rev. 1.00 )
2Xper moduleCopyright © This manual is copyrighted with all rights reserved. Under the copyright law, this manual may not be copied, in whole or    part, without written consent of Philips. Under the law, copying includes translating into another language or format.  The monitor described in this manual, has been certified/registered by the safety agencies/regulatory authorities as model    n° : CMPD12CV-IFCC Notice This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of   FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  installation.  This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the   instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.   If this equipment does cause harmful interference to radio or television reception, while can be determined by turning the   equipment Off and On, the user is encouraged to try to correct the interference by one or more of the following measures.  - Reorient or relocate the receiving antenna.  - Increase the separation between the equipment and receiver.  - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  - Consult the dealer or an experienced radio TV technician for help. Modification The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly   approved by the manufacturer may void the user’s authority to operate the equipment.Cables Connections to this device must be made with shielded signals cables with metallic RFI/EMI connector hoods to maintain   compliance with FCC Rules and Regulations.   The lighting flash with arrowhead symbol is intend to alert the user of the presence of uninsulated “dangerous voltage”   within the product’s enclosure that may be sufficient magnitude to constitute a risk of electrical shock to people.   The exclamation mark is intended to alert the user of the presence of important operating and maintenance (servicing)   instructions in literature accompanying the appliance.  CAUTIONRISK OF ELECTRICAL SHOCKDO NOT OPENATTENTIONRISQUE DE CHOC ELECTRIQUENE PAS OUVRIRCAUTION: TO AVOID THE RISK OF ELECTRICAL SHOCK.DO NOT REMOVE COVER (OR BACK)NO USER SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL      WARNING:        THE ENCLOSURE HAS TO BE CHECKED UPON COLLISION DAMAGE; REFER TO QUALIFIED SERVICE PERSONNELPROSCRIBE MONITOR DO NOT HAVE APPLIED PARTS, AND ARE NOT INTENDED TO BE CONNECTED TO A PATIENT CIRCUIT.
Download:
Mirror Download [FCC.gov]
Document ID1194591
Application IDKDCZ9+U6l2oS4fAeCjm+Fw==
Document DescriptionUserMan
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize63.44kB (792964 bits)
Date Submitted2009-11-05 00:00:00
Date Available2009-11-05 00:00:00
Creation Date2009-11-05 14:44:46
Producing SoftwareAcrobat Distiller 8.0.0 (Windows)
Document Lastmod2009-11-05 14:44:46
Document Title15_CMPD12CV-I UserMan.pdf
Document CreatorAdobe InDesign CS2 (4.0)
Document Author: gshn
FCC ID Filing: GZM802160

Navigation menu