First Alert Sa710 Users Manual ManualsLib Makes It Easy To Find Manuals Online!

: First-Alert First-Alert-Sa710-Users-Manual-119869 first-alert-sa710-users-manual-119869 first-alert pdf

Open the PDF directly: View PDF .
Page Count: 6

IMPORTANT!

PLEASE READ CAREFULLY AND SAVE.

This user’s manual contains important information about your Smoke

Alarm’s operation. If you are installing this Smoke Alarm for use by

others, you must leave this manual—or a copy of it—with the end user.

USER’S MANUAL

Printed in Mexico

M08-0049-005 K1 05/07 Model SA710

TABLE OF CONTENTS

Fire Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Before You Install This Smoke Alarm . . . . . . . . . . . . . . . . . . . . . . . .1

How To Install This Smoke Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Optional Locking Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Weekly Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Regular Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

If This Smoke Alarm Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

What To Do In Case Of Fire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Using the Silence Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

If You Suspect A Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Recommended Locations For Smoke Alarms . . . . . . . . . . . . . . . .4-5

Locations To Avoid For Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . .5

About Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Special Compliance Considerations . . . . . . . . . . . . . . . . . . . . . . . . .6

Limitations Of Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

© 2007 BRK Brands, Inc., a Jarden Corporation company (NYSE: JAH)

3901 Liberty Street Road, Aurora, IL 60504-8122

All rights reserved.

Consumer Affairs: (800) 323-9005 • www.firstalert.com

FIRE SAFETY TIPS

Follow safety rules and prevent hazardous situations: 1) Use smoking

materials properly. Never smoke in bed. 2) Keep matches or lighters

away from children; 3) Store flammable materials in proper containers;

4) Keep electrical appliances in good condition and don’t overload elec-

trical circuits; 5) Keep stoves, barbecue grills, fireplaces and chimneys

grease- and debris-free; 6) Never leave anything cooking on the stove

unattended; 7) Keep portable heaters and open flames, like candles,

away from flammable materials; 8) Don’t let rubbish accumulate.

Keep alarms clean, and test them weekly. Replace alarms immediately

if they are not working properly. Smoke Alarms that do not work cannot

alert you to a fire. Keep at least one working fire extinguisher on every

floor, and an additional one in the kitchen. Have fire escape ladders or

other reliable means of escape from an upper floor in case stairs are

blocked.

BEFORE YOU INSTALL THIS SMOKE ALARM

Important! Read “Recommended Locations for Smoke Alarms”

and “Locations to Avoid for Smoke Alarms” before beginning. This

unit monitors the air, and when smoke reaches its sensing chamber,

it alarms. It can give you more time to escape before fire spreads.

This unit can ONLY give an early warning of developing fires if it is

installed, maintained and located where smoke can reach it, and where

all residents can hear it, as described in this manual. This unit will not

sense gas, heat, or flame. It cannot prevent or extinguish fires.

Understand The Different Type of Smoke Alarms

Battery powered or electrical? Different Smoke Alarms provide

different types of protection. See “About Smoke Alarms” for details.

Know Where To Install Your Smoke Alarms

Fire Safety Professionals recommend at least one Smoke Alarm on

every level of your home, in every bedroom, and in every bedroom

hallway or separate sleeping area. See “Recommended Locations

For Smoke Alarms” and “Locations To Avoid For Smoke Alarms” for

details.

Know What Smoke Alarms Can and Can’t Do

A Smoke Alarm can help alert you to fire, giving you precious time to

escape. It can only sound an alarm once smoke reaches the sensor.

See “Limitations of Smoke Alarms” for details.

Check Your Local Building Codes

This Smoke Alarm is designed to be used in a typical single-family

home. It alone will not meet requirements for boarding houses,

apartment buildings, hotels or motels. See “Special Compliance

Considerations” for details.

*All First Alert®Smoke Alarms conform to regulatory requirements,

including UL217 and are designed to detect particles of combustion.

Smoke particles of varying number and size are produced in all fires.

Ionization technology is generally more sensitive than photoelectric

technology at detecting small particles, which tend to be produced

in greater amounts by flaming fires, which consume combustible

materials rapidly and spread quickly. Sources of these fires may include

paper burning in a wastebasket, or a grease fire in the kitchen.

Photoelectric technology is generally more sensitive than ionization

technology at detecting large particles, which tend to be produced

in greater amounts by smoldering fires, which may smolder for

hours before bursting into flame. Sources of these fires may include

cigarettes burning in couches or bedding.

For maximum protection, use both types of Smoke Alarms on each

level and in every bedroom of your home.

• This unit will not alert hearing impaired residents.

It is recommended that you install special units which use

devices like flashing strobe lights to alert hearing impaired

residents.

• Do not connect this unit to any other alarm or auxiliary

device. It is a single-station unit that cannot be linked to

other devices. Connecting anything else to this unit may

prevent it from working properly.

• Unit will not operate without battery power. The Smoke

Alarm cannot work until you install the battery in the correct

position (Match “+” to “+” and “-” to “-”).

• This Smoke Alarm has a battery drawer which resists closing

unless a battery is installed.

• Do not install this unit over an electrical junction box.

Air currents around junction boxes can prevent smoke from

reaching the sensing chamber and prevent the unit from

alarming. Only AC powered units are intended for installation

over junction boxes.

• Do not stand too close to the unit when the alarm is sounding.

It is loud to wake you in an emergency. Exposure to the horn

at close range may harm your hearing.

• Do not paint over the unit. Paint may clog the openings to

the sensing chamber and prevent the unit from operating

properly.

1

SMOKE AND FIRE* ALARM

HOW TO INSTALL THIS SMOKE ALARM

THE PARTS OF THIS SMOKE ALARM FOLLOW THESE SIMPLE STEPS!

2

1. Mounting bracket

2. Mounting slots

3. Battery drawer, install 9V

battery here

4. Turn this way to remove

from bracket

5. Turn this way to attach

to bracket

1. Test/Silence button

2. Battery drawer

3. Power indicator light and

alarm indicator

If you want to lock the battery drawer, or lock the Smoke Alarm

to the mounting bracket, please read the “Optional Locking

Features” section before you begin installation.

1. Hold base firmly and twist the mounting bracket counterclockwise

to separate it from the base.

2. Hold the mounting bracket against the ceiling (or wall) so the

vertical mounting slot is aligned in the 12 o’clock position and

trace around the inside of the mounting slots (vertical and

horizontal mounting).

3. Put the unit where it won’t get covered with dust when you drill

the mounting holes.

4. Using a 3/16” (5 mm) drill bit, drill a hole through the center of the

oval outlines you traced.

5. Insert the plastic screw anchors (in the plastic bag with screws)

into the holes. Tap the screw anchors gently with a hammer, if

necessary, until they are flush with the ceiling or wall.

6. Attach the mounting bracket to the ceiling or wall.

7. Install the battery (included). Open the

battery drawer. Match the terminals on the

end of the battery with the terminals on the

unit. Match “+” to “+” and “-” to “-.” Push

the battery in until it snaps in securely and

cannot be shaken loose. If the battery is

not snapped in completely, the unit cannot

receive battery power.

Or, activate the battery back-up by removing the “Pull to

Activate Battery Back-Up” tab.

NOTE: After you install the battery, the power indicator light may

flash. (If the unit alarms, the light will blink rapidly, and the horn

will repeatedly sound 3 beeps, pause, 3 beeps.)

8. Attach the Smoke Alarm to the mounting bracket. Line up the

guides on the alarm’s base with the guides on the mounting

bracket. When guides are lined up, turn the base clockwise (right)

until it snaps into place.

NOTE: Once the Smoke Alarm is snapped onto the mounting

bracket, you can rotate the Smoke Alarm to adjust the align-

ment.

9. Test the Smoke Alarm. See “Weekly Testing.”

TOOLS YOU WILL NEED:

This unit is designed to be mounted

on the ceiling, or on the wall if necessary.

• Pencil

• Drill with 3/16” (5 mm) drill bit

• Standard flathead screwdriver

• Hammer

• Pliers or utility knife, to activate optional

“tamper-resistant” locking features

WEEKLY TESTING

3

TO LOCK THE BATTERY COMPARTMENT

Do not lock the battery compartment until you activate the battery

and test the Smoke Alarm.

1. Install the battery so the terminals

on the battery match the terminals

on the Smoke Alarm. Match “+” to

“+” and “-” to “-.” Push the battery in

until it snaps in securely and cannot

be shaken loose. If the battery is

not snapped in completely, the unit

cannot receive battery power.

2. Push and hold test button until the

alarm sounds:

3 beeps, pause, 3 beeps, pause.

If the unit does not alarm during

testing, DO NOT lock the battery

compartment! Install a new battery

and test again. If the Smoke Alarm still

does not alarm, replace it immediately.

3. Using needle-nose pliers or a utility

knife, detach one locking pin from

the mounting bracket.

4. Push the locking pin through the hole

near the battery door latch on the

back of the Smoke Alarm.

OPTIONAL LOCKING FEATURES

TO LOCK THE MOUNTING BRACKET

1. Using needle-nose pliers,

detach one locking pin from

the mounting bracket.

2. Insert the locking pin through

the hole on the back of the

Smoke Alarm as shown in the

diagram.

3. When you attach the Smoke

Alarm to the mounting bracket,

the locking pin’s head will fit

into a notch on the bracket.

The optional locking features are designed to prevent unauthorized removal of the battery or alarm. It is not necessary to activate the locks in

single-family households where unauthorized battery or alarm removal is not a concern.

These Smoke Alarms have two separate locking features: one to lock the battery compartment, and the other to lock the Smoke Alarm to the mounting

bracket. You can choose to use either feature independently, or use them both.

Tools you will need: • Needle-nose pliers or utility knife • Standard flathead screwdriver.

Both locking features use locking pins, which are molded into the mounting bracket. Depending on which locking

features you use, remove one or both pins from the mounting bracket using needle-nose pliers or a utility knife.

To permanently remove either locking pin, insert a flathead screwdriver between the locking pin and the lock,

and pry the pin out of the lock.

TO UNLOCK THE BATTERY COMPARTMENT

1. Remove the Smoke Alarm

from the mounting bracket.

If the unit is locked to the

bracket, see the section

“To Unlock the Mounting

Bracket.”

2. Insert a flathead screwdriver

under the head of the locking

pin, and gently pry it out of the

battery compartment lock.

(If you plan to relock the battery

compartment, save the locking

pin.)

3. To relock the battery compart-

ment, close the battery door and

reinsert locking pin in lock.

4. Reattach the Smoke Alarm

to the mounting bracket.

When replacing the battery, always

test the Smoke Alarm before re-

locking the battery compartment.

TO UNLOCK THE MOUNTING BRACKET

1. Insert a flathead screwdriver into

the rectangular cut-out on the

mounting bracket nearest to the

locking pin.

2. Pry the Smoke Alarm away from

the bracket by pushing up on

the screwdriver and turning the

Smoke Alarm counterclockwise

(left) at the same time.

• NEVER use an open flame of any kind to test this unit. You

might accidentally damage or set fire to the unit or to your

home. The built-in test switch accurately tests the unit’s

operation as required by Underwriters Laboratories, Inc. (UL).

• If the Alarm ever fails to test properly, replace it immediately.

Products under warranty may be returned to the manufacturer

for replacement. See “Limited Warranty” for details.

• DO NOT stand close to the alarm when the horn is sounding.

Exposure at close range may be harmful to your hearing. When

testing, step away when horn starts sounding.

It is important to test this unit every week to make sure it is working

properly. Using the test button is the recommended way to test this

Smoke Alarm. Press and hold the test button on the cover of the unit

until the alarm sounds (the unit may continue to alarm for a few seconds

after you release the button). If it does not alarm, make sure the unit is

receiving power (LED will flash approximately once a minute indicating

it has power); and test it again. If it still does not alarm, replace it

immediately. During testing you will hear a loud, repeating horn pattern:

3 beeps, pause, 3 beeps, pause.

REGULAR MAINTENANCE

This unit has been designed to be as maintenance free as possible, but

there are a few simple things you must do to keep it working properly.

Use only the replacement batteries listed below. The unit may not

operate properly with other batteries. Never use rechargeable

batteries since they may not provide a constant charge.

• Test it at least once a week.

• Clean the Smoke Alarm at least once a month; gently vacuum off

any dust using your household vacuum’s soft brush attachment,

and test the Smoke Alarm after cleaning. Never use water, cleaners

or solvents since they may damage the unit.

• If the Smoke Alarm becomes contaminated by excessive dirt, dust

and/or grime, and cannot be cleaned to avoid unwanted alarms,

replace the unit immediately.

• Relocate the unit if it sounds frequent unwanted alarms. See

“Locations to Avoid For Smoke Alarms” for details.

• When the battery becomes weak, the Smoke Alarm unit will “chirp”

approximately once a minute (the low battery warning). This low

battery warning should last for up to 30 days, but you should

replace the battery immediately to continue your protection.

Choosing a replacement battery:

Your Smoke Alarm requires one standard 9V battery. The following

batteries are acceptable as replacements: Duracell #MN1604, (Ultra)

#MX1604; Eveready (Energizer) #522. You may also use a Lithium

battery like the Ultralife U9VL-J for longer service life between battery

changes. These batteries are available at many local retail stores.

Actual service life depends on the Smoke Alarm and the environment

in which it is installed. All the batteries specified above are acceptable

replacement batteries for this unit. Regardless of the manufacturer’s

suggested battery life, you MUST replace the battery immediately once

the unit starts “chirping” (the “low battery warning”).

IF THIS SMOKE ALARM SOUNDS

RESPONDING TO AN ALARM

During an alarm, you will hear a loud, repeating horn pattern:

3 beeps, pause, 3 beeps, pause. The LED will flash rapidly.

• If the unit alarms and you are not testing the unit, it is warning

you of a potentially dangerous situation that requires your

immediate attention. NEVER ignore any alarm. Ignoring the

alarm may result in injury or death.

• Never remove the batteries from a battery operated Smoke

Alarm to stop an unwanted alarm (caused by cooking smoke,

etc.). Removing batteries disables the alarm so it cannot sense

smoke, and removes your protection. Instead open a window

or fan the smoke away from the unit. The alarm will reset auto-

matically.

• If the unit alarms get everyone out of the house immediately.

IF YOU SUSPECT A PROBLEM

Smoke Alarms may not operate properly because of dead, missing or

weak batteries, a build-up of dirt, dust or grease on the Smoke Alarm

cover, or installation in an improper location. Clean the Smoke Alarm as

described in “Regular Maintenance,” and install a fresh battery, then test

the Smoke Alarm again. If it fails to test properly when you use the test

button, or if the problem persists, replace the Smoke Alarm immediately.

• If you hear a “chirp” about once a minute, replace the battery.

• If you experience frequent non-emergency alarms (like those

caused by cooking smoke), try relocating the Smoke Alarm.

• If the alarm sounds when no smoke is visible, try cleaning or

relocating the Smoke Alarm. The cover may be dirty.

• If the alarm does not sound during testing, try installing a new

battery, and make sure it is snapped in securely.

If the Smoke Alarm is still not operating properly, and it is still under

warranty, please see “How to Obtain Warranty Service” in the Limited

Warranty.

Do not try fixing the alarm yourself – this will void your warranty!

LIMITED WARRANTY

BRK Brands, Inc., ("BRK") the maker of First Alert®brand products

warrants that for a period of ten years from the date of purchase, this

product will be free from defects in material and workmanship. BRK, at

its option, will repair or replace this product or any component of the

product found to be defective during the warranty period. Replacement

will be made with a new or remanufactured product or component. If the

product is no longer available, replacement may be made with a similar

product of equal or greater value. This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of

initial retail purchase and is not transferable. Keep the original sales

receipt. Proof of purchase is required to obtain warranty performance.

BRK dealers, service centers, or retail stores selling BRK products do

not have the right to alter, modify or any way change the terms and

conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting

from any of the following: negligent use or misuse of the product, use on

improper voltage or current, use contrary to the operating instructions,

disassembly, repair or alteration by anyone other than BRK or an

authorized service center. Further, the warranty does not cover Acts of

God, such as fire, flood, hurricanes and tornadoes or any batteries that

are included with this unit.

BRK shall not be liable for any incidental or consequential damages

caused by the breach of any express or implied warranty. Except to

the extent prohibited by applicable law, any implied warranty of

merchantability or fitness for a particular purpose is limited in duration

to the duration of the above warranty. Some states, provinces or

jurisdictions do not allow the exclusion or limitation of incidental or

consequential damages or limitations on how long an implied warranty

lasts, so the above limitations or exclusion may not apply to you. This

warranty gives you specific legal rights, and you may also have other

rights that vary from state to state or province to province.

How to Obtain Warranty Service

Service: If service is required, do not return the product to your retailer.

In order to obtain warranty service, contact the Consumer Affairs

Division at 1-800-323-9005, 7:30 AM - 5:00 PM Central Standard Time,

Monday through Friday. To assist us in serving you, please have the

model number and date of purchase available when calling.

For Warranty Service return to:

BRK Brands, Inc., 25 Spur Drive, El Paso, TX 79906

Battery: BRK Brands, Inc. make no warranty, express or implied, written

or oral, including that of merchantability or fitness for any particular

purpose with respect to battery.

RECOMMENDED LOCATIONS FOR

SMOKE ALARMS

Installing Smoke Alarms in Single-Family Residences

The National Fire Protection Association (NFPA), recommends one

Smoke Alarm on every floor, in every sleeping area, and in every bed-

room. In new construction, the Smoke Alarms must be AC powered

and interconnected. See “Agency Placement Recommendations” for

details. For additional coverage, it is recommended that you install a

Smoke Alarm in all rooms, halls, storage areas, finished attics, and

basements, where temperatures normally remain between 40˚ F (4˚ C)

and 100˚ F (38˚ C). Make sure no door or other obstruction could keep

smoke from reaching the Smoke Alarms.

More specifically, install Smoke Alarms:

•

On every level of your home, including finished attics and basements.

• Inside every bedroom, especially if people sleep with doors closed.

• In the hall near every sleeping area. If your home has multiple sleep-

ing areas, install a unit in each. If a hall is over 40 feet (12 meters)

long, install an alarm at each end.

• At the top of the first-to-second floor stairway, and at bottom of

basement stairway.

Specific requirements for Smoke Alarm installation vary from state to

state and from region to region. Check with your local Fire Department

for current requirements in your area. It is recommended AC or AC/DC

units be interconnected for added protection.

See “Recommended Locations For Smoke Alarms” diagram on the

following page.

4

WHAT TO DO IN CASE OF FIRE

• Don’t panic; stay calm. Follow your family escape plan.

• Get out of the house as quickly as possible. Don’t stop to get

dressed or collect anything.

• Feel doors with the back of your hand before opening them.

If a door is cool, open it slowly. Don’t open a hot door. Keep doors

and windows closed, unless you must escape through them.

• Cover your nose and mouth with a cloth (preferably damp).

Take short, shallow breaths.

• Meet at your planned meeting place outside your home,

and do a head count to make sure everybody got out safely.

• Call the Fire Department as soon as possible from outside.

Give your address, then your name.

• Never go back inside a burning building for any reason.

• Contact your Fire Department for ideas on making your home safer.

Alarms have various limitations. See "Limitations of Smoke Alarms"

for details.

USING THE SILENCE FEATURE

The Silence Feature can temporarily quiet an unwanted alarm for up to

15 minutes. To use this feature, press the “Push to Test/Silence” button

on the cover. If the unit will not silence and no heavy smoke is

present, or if it stays in silence mode continuously, it should be

replaced immediately. The LED will flash every 10 seconds while in

silence.

The Silence Feature does not disable the unit—it makes it

temporarily less sensitive to smoke. For your safety, if smoke

around the unit is dense enough to suggest a potentially dangerous

situation, the unit will stay in alarm or may re-alarm quickly. If you

do not know the source of the smoke, do not assume it is an

unwanted alarm. Not responding to an alarm can result in property

loss, injury, or death.

INSTALLING SMOKE ALARMS IN MOBILE HOMES & RVS

For minimum security install one Smoke Alarm as close to each sleeping

area as possible. For more security, put one unit in each room. Many

older mobile homes (especially those built before 1978) have little or no

insulation. If your mobile home is not well insulated, or if you are unsure

of the amount of insulation, it is important to install units on inside walls

only. Smoke Alarms should be installed where temperatures normally

remain between 40˚ F (4˚ C) and 100˚ F (38˚ C). WARNING: Test units

used in RVs after the vehicle has been in storage, before every trip,

and once a week while in use. Failure to test units used in RVs as

described may remove your protection.

This equipment should be installed in accordance with NFPA (National Fire

Protection Association) 72 and

101. National Fire Protection Association,

One Batterymarch Park, Quincy, MA 02269-9101. Additional local

building and regulatory codes may apply in your area. Always check

compliance requirements before beginning any installation. This

model is not RV listed with Underwriters Laboratories Inc.

AGENCY PLACEMENT RECOMMENDATIONS

NFPA 72 (National Fire Code)

Smoke Alarms shall be installed in each separate sleeping room, outside

each sleeping area in the immediate vicinity of the bedrooms and on

each additional story of the family living unit, including basements and

excluding crawl spaces and unfinished attics.

In new construction, Alarms shall be so arranged that operation of any

one Alarm shall cause the operation of all Alarms within the dwelling.

Smoke Detection-Are More Smoke Alarms Desirable? The required

number of Smoke Alarms might not provide reliable early warning

protection for those areas separated by a door from the areas protected

by the required Smoke Alarms. For this reason, it is recommended that

the householder consider the use of additional Smoke Alarms for those

areas for increased protection. The additional areas include the base-

ment, bedrooms, dining room, furnace room, utility room, and hallways

not protected by the required Smoke Alarms. The installation of Smoke

Alarms in kitchens, attics (finished or unfinished), or garages is not

normally recommended, as these locations occasionally experience

conditions that can result in improper operation.

California State Fire Marshal (CSFM)

Early warning detection is best achieved by the installation of fire

detection equipment in all rooms and areas of the household as follows:

A Smoke Alarm installed in each separate sleeping area (in the vicinity,

but outside bedrooms), and Heat or Smoke Alarms in the living rooms,

dining rooms, bedrooms, kitchens, hallways, finished attics, furnace

rooms, closets, utility and storage rooms, basements, and attached

garages.

LOCATIONS TO AVOID FOR SMOKE ALARMS

For best performance, it is recommended you AVOID installing

Smoke Alarms in these areas:

• Where combustion particles are produced. Combustion particles

form when something burns. Areas to avoid include poorly ventilated

kitchens, garages, and furnace rooms. Keep units at least 20 feet

(6 meters) from the sources of combustion particles (stove, furnace,

water heater, space heater) if possible. In areas where a 20-foot

(6-meter) distance is not possible – in modular, mobile, or smaller

homes, for example – it is recommended the Smoke Alarm be

placed as far from these fuel-burning sources as possible. The

placement recommendations are intended to keep these Alarms at

a reasonable distance from a fuel-burning source, and thus reduce

“unwanted” alarms. Unwanted alarms can occur if a Smoke Alarm

is placed directly next to a fuel-burning source. Ventilate these

areas as much as possible.

• In air streams near kitchens. Air currents can draw cooking smoke

into the sensing chamber of a Smoke Alarm near the kitchen.

• In very damp, humid or steamy areas, or directly near bathrooms

with showers. Keep units at least 10 feet (3 meters) away from

showers, saunas, dishwashers, etc.

• Where the temperatures are regularly below 40˚ F (4˚ C) or above

100˚ F (38˚ C), including unheated buildings, outdoor rooms,

porches, or unfinished attics or basements.

• In very dusty, dirty, or greasy areas. Do not install a Smoke Alarm

directly over the stove or range. Keep laundry room Smoke Alarms

free of dust or lint.

• Near fresh air vents, ceiling fans, or in very drafty areas. Drafts can

blow smoke away from the unit, preventing it from reaching the

sensing chamber.

• In insect infested areas. Insects can clog openings to the sensing

chamber and cause unwanted alarms.

• Less than 12 inches (305mm) away from fluorescent lights.

Electrical “noise” can interfere with the sensor.

• In “dead air” spaces. “Dead air” spaces may prevent smoke from

reaching the Smoke Alarm.

Avoiding Dead Air Spaces

“Dead air” spaces may prevent smoke from reaching the Smoke Alarm.

To avoid dead air spaces, follow the installation recommendations

below.

On ceilings, install Smoke Alarms as close to the center of the ceiling

as possible. If this is not possible, install the Smoke Alarm at least 4

inches (102 mm) from the wall or corner.

For wall mounting (if allowed by building codes), the top edge of

Smoke Alarms should be placed between 4 and 12 inches (102 and

305 mm) from the wall/ceiling line, below typical “dead air” spaces.

On a peaked, gabled, or cathedral ceiling, install the first Smoke

Alarm within 3 feet (0.9 meters) of the peak of the ceiling, measured

horizontally. Additional Smoke Alarms may be required depending on

the length, angle, etc. of the ceiling's slope. Refer to NFPA 72 for

details on requirements for sloped or peaked ceilings.

5

BEDROOM

BEDROOM HALL

LIVING ROOM KITCHEN

FINISHED BASEMENT

BEDROOM

BEDROOM LIVING ROOM

DINING ROOM

MULTI-STORY RESIDENCE

SINGLE-STORY RESIDENCE, APARTMENT,

MOBILE HOME

EXISTING HOMES

KITCHEN

REQUIRED TO

MEET NFPA

RECOMMENDATIONS

RECOMMENDED

FOR ADDITIONAL

PROTECTION

KEY:

SMOKE ALARMS WITH SILENCE

FEATURES RECOMMENDED FOR

ADDITIONAL PROTECTION

INTERCONNECTED

AC OR AC/DC

SMOKE ALARMS

BEDROOM

BEDROOM HALL

LIVING ROOM KITCHEN

FINISHED BASEMENT

REQUIRED TO

MEET NFPA

RECOMMENDATIONS

RECOMMENDED

FOR ADDITIONAL

PROTECTION

BEDROOM

BEDROOM LIVING ROOM

DINING ROOM

MULTI-STORY RESIDENCE

SINGLE-STORY RESIDENCE, APARTMENT,

MOBILE HOME

KEY:

NEW CONSTRUCTION

SMOKE ALARMS

WITH SILENCE

FEATURES

RECOMMENDED

FOR ADDITIONAL

PROTECTION

KITCHEN

RECOMMENDED LOCATIONS FOR SMOKE ALARMS

SPECIAL COMPLIANCE CONSIDERATIONS

This Smoke Alarm alone is not a suitable substitute for complete fire

detection systems in places housing many people—like apartment

buildings, condominiums, hotels, motels, dormitories, hospitals, long-

term health care facilities, nursing homes, day care facilities, or group

homes of any kind—even if they were once single-family homes. It is not

a suitable substitute for complete fire detection systems in warehouses,

industrial facilities, commercial buildings, and special-purpose non-

residential buildings which require special fire detection and alarm

systems. Depending on the building codes in your area, this Smoke

Alarm may be used to provide additional protection in these facilities.

The following information applies to all four building types below:

In new construction, most building codes require the use of AC or

AC/DC powered Smoke Alarms only. In existing construction, AC,

AC/DC, or DC powered Smoke Alarms can be used as specified by

local building codes. Refer to NFPA 101 (Life Safety Code) or NFPA 72

(National Fire Alarm Code), local building codes, or consult your Fire

Department for detailed fire protection requirements in buildings not

defined as “households.”

1. Single-Family Residence:

Single family home, townhouse. It is recommended Smoke Alarms be

installed on every level of the home, in every bedroom, and in each

bedroom hallway.

2. Multi-Family or Mixed Occupant Residence:

Apartment building, condominium. This Smoke Alarm is suitable for

use in individual apartments or condos, provided a primary fire detection

system already exists to meet fire detection requirements in common

areas like lobbies, hallways, or porches. Using this Smoke Alarm in

common areas may not provide sufficient warning to all residents or

meet local fire protection ordinances/regulations.

3. Institutions:

Hospitals, day care facilities, long-term health care facilities. This Smoke

Alarm is suitable for use in individual patient sleeping/resident rooms,

provided a primary fire detection system already exists to meet fire

detection requirements in common areas like lobbies, hallways, or

porches. Using this Smoke Alarm in common areas may not provide

sufficient warning to all residents or meet local fire protection

ordinances/regulations.

4. Hotels and Motels:

Also boarding houses and dormitories. This Smoke Alarm is suitable

for use inside individual sleeping/resident rooms, provided a primary

fire detection system already exists to meet fire detection requirements

in common areas like lobbies, hallways, or porches. Using this Smoke

Alarm in common areas may not provide sufficient warning to all

residents or meet local fire protection ordinances/regulations.

LIMITATIONS OF SMOKE ALARMS

Smoke Alarms have played a key role in reducing deaths resulting from

home fires worldwide. However, like any warning device, Smoke Alarms

can only work if they are properly located, installed, and maintained, and

if smoke reaches them. They are not foolproof.

Smoke alarms may not waken all individuals. Practice the escape

plan at least twice a year, making sure that everyone is involved – from

kids to grandparents. Allow children to master fire escape planning and

practice before holding a fire drill at night when they are sleeping.

If children or others do not readily waken to the sound of the smoke

alarm, or if there are infants or family members with mobility limitations,

make sure that someone is assigned to assist them in fire drill and in

the event of an emergency. It is recommended that you hold a fire drill

while family members are sleeping in order to determine their response

to the sound of the smoke alarm while sleeping and to determine

whether they may need assistance in the event of an emergency.

Smoke Alarms cannot work without power. Battery operated units

cannot work if the batteries are missing, disconnected or dead, if the

wrong type of batteries are used, or if the batteries are not installed

correctly. AC units cannot work if the AC power is cut off for any reason

(open fuse or circuit breaker, failure along a power line or at a power

station, electrical fire that burns the electrical wires, etc.). If you are

concerned about the limitations of battery or AC power, install both

types of units.

Smoke Alarms cannot detect fires if the smoke does not reach

them. Smoke from fires in chimneys or walls, on roofs, or on the other

side of closed doors may not reach the sensing chamber and set off the

alarm. That is why one unit should be installed inside each bedroom or

sleeping area—especially if bedroom or sleeping area doors are closed

at night—and in the hallway between them.

Smoke Alarms may not detect fire on another floor or area of the

home. For example, a stand-alone unit on the second floor may not

detect smoke from a basement fire until the fire spreads. This may not

give you enough time to escape safely. That is why recommended

minimum protection is at least one unit in every sleeping area, and

every bedroom on every level of your home. Even with a unit on every

floor, stand-alone units may not provide as much protection as inter-

connected units, especially if the fire starts in a remote area. Some

safety experts recommend installing interconnected AC powered units

with battery back-up (see “About Smoke Alarms”) or professional fire

detection systems, so if one unit senses smoke, all units alarm.

Interconnected units may provide earlier warning than stand-alone

units since all units alarm when one detects smoke.

Smoke Alarms may not be heard. Though the alarm horn in this unit

meets or exceeds current standards, it may not be heard if: 1) the unit

is located outside a closed or partially closed door, 2) residents recently

consumed alcohol or drugs, 3) the alarm is drowned out by noise from

stereo, TV, traffic, air conditioner or other appliances, 4) residents are

hearing impaired or sound sleepers. Special purpose units, like those

with visual and audible alarms, should be installed for hearing impaired

residents.

Smoke Alarms may not have time to alarm before the fire itself

causes damage, injury, or death, since smoke from some fires may

not reach the unit immediately. Examples of this include persons

smoking in bed, children playing with matches, or fires caused by

violent explosions resulting from escaping gas.

Smoke Alarms are not foolproof. Like any electronic device, Smoke

Alarms are made of components that can wear out or fail at any time.

You must test the unit weekly to ensure your continued protection.

Smoke Alarms cannot prevent or extinguish fires. They are not a

substitute for property or life insurance.

Smoke Alarms have a limited life. The unit should be replaced

immediately if it is not operating properly. You should always replace a

Smoke Alarm after 10 years from date of purchase. Write the purchase

date on the space provided on back of unit.

First Alert®is a registered trademark of the First Alert Trust.

6

ABOUT SMOKE ALARMS

Battery (DC) operated Smoke Alarms: Provide protection even when

electricity fails, provided the batteries are fresh and correctly installed.

Units are easy to install, and do not require professional installation.

AC powered Smoke Alarms: Can be interconnected so if one unit

senses smoke, all units alarm. They do not operate if electricity fails.

AC with battery (DC) back-up: will operate if electricity fails, provided

the batteries are fresh and correctly installed. AC and AC/DC units

must be installed by a qualified electrician.

Smoke Alarms for Solar or Wind Energy users and battery backup

power systems: AC powered Smoke Alarms should only be operated

with true or pure sine wave inverters. Operating this Smoke Alarm with

most battery-powered UPS (uninterruptible power supply) products or

square wave or “quasi sine wave” inverters will damage the Alarm. If

you are not sure about your inverter or UPS type, please consult with

the manufacturer to verify.

Smoke Alarms for the hearing impaired: Special purpose Smoke

Alarms should be installed for the hearing impaired. They include a

visual alarm and an audible alarm horn, and meet the requirements of

the Americans With Disabilities Act. Can be interconnected so if one

unit senses smoke, all units alarm.

Smoke alarms are not to be used with detector guards unless the

combination has been evaluated and found suitable for that purpose.

All these Smoke Alarms are designed to provide early warning of fires if

located, installed and cared for as described in the user’s manual, and

if smoke reaches them. If you are unsure which type of Smoke Alarm

to install, refer to Chapter 2 of the National Fire Protection Association

(NFPA) Standard 72 (National Fire Alarm Code) and NFPA 101 (Life

Safety Code). National Fire Protection Association, One Batterymarch

Park, Quincy, MA 02269-9101. Local building codes may also require

specific units in new construction or in different areas of the home.

Printed in Mexico M08-0049-005 K1 05/07