Fluke Electronics FBLE Radio Module User Manual Integration Instruction
Fluke Electronics Radio Module Integration Instruction
Contents
- 1. Integration Instruction
- 2. RF Warning Manual
- 3. Module Manual
Integration Instruction
Fluke Corporation Telephone Facsimile Email
PO Box 9090 Everett WA 98206.9090 USA 425.347.6100 425.356.5108 http//www.fluke.com
Comprehensive Integration Instructions for Fluke FBLE Radio Module
LABELING REQUIREMENTS FOR END-PRODUCT
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are
met. The FBLE module is labeled with its own FCC ID and IC Certification Number. The FCC ID
and IC certification numbers are not visible when the module is installed inside another device.
The final end product must be labeled in a visible area with the following: “Contains
Transmitter Module FCC ID: T68-FBLE”
“Contains Transmitter Module FCC ID: T68-FBLE”
“Contains Transmitter Module IC: 6627A-FBLE”
The Fluke FBLE Module has been certified with its own on-board antenna and must not be used
with other antenna(s).